Long term planning without coverage profile

Hi,
We want to run LTP without consider material coverage profile. We have PIR and the LTP has to create planned orders with the same quantity as PIRs.
All materials have a coverage profile (dynamic safety stock), but in LTP this coverage stock produces more quantity than in PIR, how can we solve that?
Thanks in advance,
Jen

As the Coverage Profile is maintained the system is trying to maintain a Minimum Safety stock avaialble from the dynamic safety stock calculation.
That is the reason for your Procurement quantites more than the PIR's.
Regards
Ratan

Similar Messages

Short, medium and long term planning in SNP

Hi,
can somebody explain me what Short, medium and long term planning mean in SNP?
Lets, say I have this scenario:
If I have a product with SNP horizon of 35 days, which means that the product is planned in SNP only after 35 days from today. Only PPDs deals with orders in these 35 days.
I have a 3 planning books
short term with 30 days from today
medium term with 7 months from today and
long term with 2 years from today.
When I say short, medium and long term planning in SNP what exactly happens in these ?? What do users usually do in these books?
SNP horizon is 35 days and the short term book is 30 days long, in which SNP does nothing. What's the use of this book?
Thanks.

When I say short, medium and long term planning in SNP what exactly happens in these ??
Nothing much from a technical stand point.
What do users usually do in these books?
Check the Time Bucket Profile for the different books. The short Term Book will be in days, the mid term in weeks and the long term in months/quarters etc. The different books allows users to see the keyfigures in different time-based aggregate level.
But if Heuristic is executed then behaviour will be different. Remember SNP Location Heuristic run uses the bucket of the data view to compute the Net Requirement and then try creating Receipts in each bucket within the time horizon of the data view using suitable master data. So if you run Location Heuristic in the short Term (daily) view then you will have many receipts one per day most likely. If you run in mid-term Weekly view then there are less number of receipts one receipt per week till 7 months. likewise for the long term view.
SNP horizon is 35 days and the short term book is 30 days long, in which SNP does nothing. What's the use of this book?
Maybe just to see the data. Location Heuristic run will not generate any new receipt.
Thanks,
Somnath

Capacity planning Long-term planning CM38

Hi,
I am using Long-term planning scenario. I have created 12 PIRs for 12 months from January 2010 to December 2010. I executed MRP in MS01 in Lead scheduling Mode.
There are 12 planned orders created for the 12 PIRs for the months Jan to Dec-2010. When I see the planned orders in MS04 the satrt and finish date for the planned orders are showing in respective months beginning.
But when I check capacity in transaction CM38, all the 12 planned order for Jan to December months are displayed in the month of January itself instead of the respective months from Jan to December and the work center is overloaded 199%.
Please suggest to solve this issue.
thanks and regards
Murugesan

Hi,
In customization for Capacity Planning you can define you own selection profiles to work with. You may specify further selection criteria in selection profile and enhance query speed from database. Slection profiles are assigned to overall profiles and overall profiles can be called by CM07 transaction. CM38 is also working over an overall profile which you may learn from SAP help. This can also be changed.
Also check OPC5 to limit max data for selection which might be useful.
Regards.

Use Reorder Point Planning and see VSE Requirements in Long Term Planning

Hello,
I would like to use reorder point planning short term and something similar to MRP planning long term. I am trying to drive actual production off of consumption and plan long term for capacity, inventory and BOM components. Our plan is to delete the near term forecast and leave the long term forecast in to show requirements for LTP.
I'm configured for Reorder Point Planning as follows:
MRP type V1, Reorder Point Planning with External Requirements
Planning Strategy 52
HB Max Stock Level
For the longer term forecast requirements I'm configured with:
Independent Requirement Type VSE, Planning without final assembly. This is creating non convertible planned order independent requirements.
The reorder point planning is executing perfectly, but how do I get the VSE planned order independent requirements to show up in long term capacity and inventory planning? What am I missing? Is it something with MRP type, am I missing an option in the long term planning setup?
This has been a tough issue and I would greatly appreciate any advice on this.
Thank you,
Wes
Edited by: weslaney on Jul 21, 2009 11:40 PM

HI
check the planning scenario in MS31 and the PIR assignment in MS31 also check the plant assignement.
Check In MD61 you have enter PIRs in simulation version and the same version is to assigned in planning scenario
Also check T code OPU5 for LTP setting for planned orders
Regards
Anupam Sharma
Edited by: anupam sharma on Sep 3, 2010 2:33 PM

Long Term Planning Issue - Transaction MS04

Hi Experts,
I have two problems looking for solution from you.
1. Transaction Code MS04 -> After entered Planning Version, Material and Plant... I can see list of orders in the report. If I click Production Order, Planned Order, Inspection Lot document Element Details (on left hand additional function) and I am able to double click and display these documents. However If I double click Material Reservsation document It is not allowing me as I can't see "Display element (F7) Icon. How do I get the display element icon for Material reservation document also.
2. We have a lot of Quality Inpsection lots documents when we display in MS04 report but the problem here it is peggeging as requirements in Long term planning report. We want to just display the document here not as requirements.
Please let me know the solution for above two.
Regards
Rc Gopi

Dear NNeeti,
1.In CM38-->in the top menu --->under Planning ->Profiles->Overall Profile.
2For this over all profile check the Details in OPA6 T Code and find out the option Profile assigned to this over all profile.
3.Edit the details of this Option profile in OPA3 (change the number of days as 730 instead of 365 in the finish date).
Check with this setting in CM38 and proceed.
Check and revert
Regards
S Mangalraj

Long-term planning: planning details of work center capacity

Hi,
we need to know what is the effect on planned production orders (generated by MPS, transaction MD40) of the flag “long-term planning” in planning details of work center capacity (table name: RC68K; field name: KAPLPL). We made a test analyzing planned orders scheduling details in Stock requirements list (MD04) and in the Planning table (CM21) in both cases: with "long-term planning" flag set and without this flag for the same work center.
The schedule of planned production order on that work center is the same in the two instance.
Could you suggest us something?
Thank you.

Hi Rudy,
Purpose for carrying out Long Term Planning to simulate impact of Future Demand Program on
u2022 Material Requirements
u2022 Capacity Requirements
u2022 Material Cost budgeting (activity by Accounts dept.)
T.Codes used -
u2022 Demand MD61, MD62, MD63
u2022 Scenario Creation MS31, MS32, MS33
u2022 LTP Variant Creation & Execution MSBT, SM37
u2022 LTP statistics Evaluation SM37, MS04
u2022 Data Set Up MS70, MSB&
u2022 Evaluation based on Set up data MCB), MCEA, MCEB, MCEC
u2022 Capacity Evaluation CM38
To Summarize -
u2022 In long-term planning, production plans for future demand programs are simulated using MRP runs with reference to the planning scenarios.
u2022 The parameters for the simulation in the simulation planning area are defined in the scenario.
u2022 The Evaluation of LTP Statistics enables identification of Material for which LTP processing was terminated.
u2022 The Data set for purchasing & Inventory Control enables reports for demand analysis
u2022 LTP run with setting for u201CLead time scheduling and capacity planningu201D enables simulation of capacity situation/overload on work centers.
Hope it is helpful to you.
Srini

Long Term Planning-Planning File Entry

Hi Gurus/Friends
In the long term planning after PIR with inactive version and creating Scenario, assinging versions, Plants,....then
during Release+Save it is giving the Result of Planning File Entries
Logically the system has suppose to give the Number of Planning File Entries in Propotionate to the Specific Planning Scenario number and materials inside
But it is giving for all the Materials inside the Plant
Is there any settings to restrict the Planning File Entry creation w.r.t Planning scenario during Release+Save
other than the solutions through Transaction MS20,MS22 and MSAB
(Because during Release+save logically it has to call the MS22 t.code and do planning file entries for the materials in that scenario)
Awaiting for reply
thanks
K.Prabakaran

Hi,
Please Refer Below SAP help .
*Releasing a planning scenario*
You first have to release a planning scenario before you can plan it in the long-term planning run. When you release the planning scenario, the system creates planning file entries for all materials in all the plants allocated to the planning scenario. There is a separate planning file entry for this purpose. This guarantees that your operative planning is kept completely separate from your simulative planning. This long-term planning file contains all the materials that are also contained in the operative planning file. After the release, every change relevant to MRP triggers an entry in the planning file as in operative planning.
Pradeep
Edited by: Pradeep Kumar on May 9, 2008 4:22 PM

Excluding storage location from MRP run in Long Term Planning

Hi,friends,
In my scenario , i want to exclude storage location from MRP run in long term planning.When i set storage location MRP indicator "2" in SPRO and SLoc MRP indicator "1" MRP4 in material master, i can exclude the storage location after run MRP with MD01/MD02,and i can see the expected result in MD04.But in Long Term Planning scenario the storage location can not be excluded after run MRP with MS01/MS02,and the requirements list in MS04 include the stock in the storage location i want to exclude. i dont know if i miss something.Plz give me some advice.
Regards
Joey

Hi,
Refer the OSS Note 208017 - LTP: Long-term planning and storage locations
==========================================================================
Symptom
In long-term planning (Transactions MSBT / MS01 / MS02 / MS03), the MRP indicator of a storage location for a material is not taken into account (material master, view MRP 2 [up to and including Release 3.1I] or MRP 4 [as of Release 4.0A]).
The storage locations excluded by MRP or planned separately are also planned in the plant segment.
Additional key words
LTP, MM01, MM02, MM03, master data, MRP indicator, LGORT ...
Cause and prerequisites
The MRP indicator for a certain storage location of a material is only taken into account in operative planning (requirements planning, MRP).
The long-term planning occurs exclusively at plant level.
Solution
This is no error. The system works as intended.
The individual storage locations should not be distinguished in the long-term planning, in order to perform a comprehensive long-term planning.
This is important, for example, within the kanban processing where the storage locations with kanban MRP are excluded from the MRP, but in spite of that should be included in the long-term planning.
==========================================================================
Regards,
Siva

Extracting LTP (Long Term Planning) Data from SAP ECC to SAP BW

Hello all
Here is the task in hand. There is a standard report that Production Planners execute post their MRP/LTP runs. This report can be accessed through T-code "MCB)". The program in action is RMCB1200. I tried looking for any standard extractors but to no avail. I would be fine to know either or both of the following:
An extractor
All the primary tables involved ( I have found a few tables through the program but a list by some expert will help me understand that I have not missed anything significant)
Also, if anyone has done this before, how was your experience with the extraction in terms of extraction volume and performance.
Regards
Gajendra

After further digging, here is some information that I found out.
T-code
Program
BADI
MSEX
RMDMRPEXTRACT02
MD_SR_LIST_EXTRACT
This could possibly provide the data required. The program can be scheduled and the output can be managed by SPRO settings for Extraction Mode. I am running tests to confirm if it provides me the correct information and matches with MCB) output.
Here are some tables, just for reference:
LTP Tables: PLSC, PBHI, PLPT, MDTP, PLPR, PLPB
MRP Records:
MDKP
MRP Document Header Data
MDTB
MRP Table Structure (no data)
PLSC
Planning Scenario (Long-term Planning)
MDFD
MRP Firming Dates
MDVM
Planning File Entries
S094
LIS -- Stock/Requirements Analysis

How to consider the Purchase Orders in Long Term Planning

Hi All,
I wanted to include the Purchase Orders of Finished Material in Long Term Planning.
I have selected the check box "Long-term planning: include firmed issues and receipts" in the Planning Scenario but after LTP run system is not considering the Purchase Orders of Finished Materials for Planning.
Regards,
Shailendra
Edited by: Shailendra Hadkar on Apr 5, 2010 12:41 PM

Dear,
Could you please explain usage of purchase orders for Finished product?
Regards,
SAP CONS

MS05 Long Term Planning

I need to stock available qty at long term planing (ms05) not calculate some location that qty status nettable.
Example : Location   yy   stock onhand 100 EA   (Nettable)
                Location   xx   stock onhand 10 EA    (Nettable)
     MRP                          display stock available 100 ea but
     Long Term Planning     display stock available 110 ea (I need to display       100 ea same MRP because MRP can set config exclude from MRP)
Please advise me?

Hi,
Can you make this Location stock XX as blocked or Restricted stock, then you will be able to exclude it from the Net requirement calculation.
By deselecting the Blocked Stock or Restricted use stock for avaialbile stock in Avaialble stock configuration.

Implementing Long-Term Planning

Dear Guys,
Is that possible to implement Long-Term Planning (LTP) in SAP when there is no SOP module in the system. Would you please inform me the basic requirements or basic setup to implement LTP in SAP system.
Thank you in advance!

Hi Payam,
This is always recommended to implement LTP if you have long lead times for some procured parts, bottle necks in capacities for work centers and most important to plan about budget required for the production of those parts.
The above things you cannot check with STP/MTP and perform changes after the STP/MTP runs. But this you can do with LTP with diffrent scenarios and compare it till you satisfy.
You can do the precosting of the parts and check what would be your future costing and plant budget.
You can transfer the requireemnst of the critical parts to vendors well in advance after LTP run and before running the actual planning for the entire year, so the vendors will be well prepared to supply you the parts.
You can also checks the capacities required for the production before the STP run.
If this is OK then please close this thread.
Regards
TAJUDIN

Long-Term Planning (PP-MP-LTP)

Do you know BI content for Long-Term Planning (PP-MP-LTP)?

Not that I know.
Often business people actually mean SOP (BC: 0SOP_PLANNING) when talking about long-term planning. I don't see any point in reporting LTP that is more like alternative MRP scenarios. It is operational and different scenarios easily get confusing in reporting.
BR,Tuomas

Long term planning in ECC for materials planned in SAP APO

Hi SAP PP and APO Experts,
I would like to know whether it is possible to plan a material in SAP ECC with Long Term Planning to create Simulative Planned Orders in ECC, when the MRP Type for the material is set to X0 (Planning in SAP APO).
Warm regards,
Prem

Hi Dhaivakumar,
Appreciate your prompt response.
My business is MTS. I have made all settings for LTP planning for the material. (M|RP Type is set to X0-Planning in APO). When I execute the transaction MS02, I get the error message "Material 5200000013 J310 is not planned automatically. Message no. 61008". The details of the error message is:
The material 5200000013 in plant J310 or in MRP area is not included in automatic MRP because
either the MRP data for plant J310 or MRP area has not been created
or an MRP type has been entered for the material in plant J310 or MRP area that does not allow automatic MRP.
Warm regards,
Prem

I can't see planned order in Long Term Planning Stock/requirements list.

Hi
I am trying to use Long Term Planning in SAP.
I created scenario dates from 01.03.2011 to 03.09.2011. Between those dates i entered planned independent requirements as 300.
When i went to Long Term Planning Stock/requirements list, i can see all planned independent requirements but i run Multilevel single-item planning and then when i went to Long Term Planning Stock/requirements list again, i couldnt see planned order for planned independent requirements.
So what is the problem? Can anyone help me please?
Thank you.

HI
check the planning scenario in MS31 and the PIR assignment in MS31 also check the plant assignement.
Check In MD61 you have enter PIRs in simulation version and the same version is to assigned in planning scenario
Also check T code OPU5 for LTP setting for planned orders
Regards
Anupam Sharma
Edited by: anupam sharma on Sep 3, 2010 2:33 PM

Long term planning without coverage profile

Similar Messages

Maybe you are looking for