Long-Term Trends of Query and Statistcs - BI Application Type

HI all,
There is a query to read the statistical data as to how many times a query has been executed, and how long has each query taken while its run for a specific time period. The name of this query is Long Term Trends of Query and statistics, 0TCT_MC01_Q0424. After making a bit of modification in this query, I added a key figure that says Count (To give u the count of the number of times this BI application object has been run).
In this query, there is a navigational attribute called BI Application Type, its values are XLWB, TMPL and # (Not Assigned). XLWB would be for queries or workbooks that have been run, TMPL would be for templates but what is the # for.
I ran this query for a day. The result showed that there is another query which has been run almost 88 times today, however, when I drill down on BI application type, I find that XLWB count is 5 while # count is 83. I want to know what is this #.
appreciate if anyone can clarify this.
Rgds,
Sree.

Any update on this,
Rgds,
Sree.

Similar Messages

I have the sort of old macBook that is black and lately it has been taking a really long time to load things and to pull applications up? does anyone have suggestions of things i can do to see if they will work?

make coputer is being really slow how do i fix it????????

First try a utility like YASU or Cocktail to clean up caches and logs as well as basic disk maintenance.
Also here is a link to a excellent tip sheet from participant ds store which can help you understand the complete process.
https://discussions.apple.com/docs/DOC-3521

Use Reorder Point Planning and see VSE Requirements in Long Term Planning

Hello,
I would like to use reorder point planning short term and something similar to MRP planning long term. I am trying to drive actual production off of consumption and plan long term for capacity, inventory and BOM components. Our plan is to delete the near term forecast and leave the long term forecast in to show requirements for LTP.
I'm configured for Reorder Point Planning as follows:
MRP type V1, Reorder Point Planning with External Requirements
Planning Strategy 52
HB Max Stock Level
For the longer term forecast requirements I'm configured with:
Independent Requirement Type VSE, Planning without final assembly. This is creating non convertible planned order independent requirements.
The reorder point planning is executing perfectly, but how do I get the VSE planned order independent requirements to show up in long term capacity and inventory planning? What am I missing? Is it something with MRP type, am I missing an option in the long term planning setup?
This has been a tough issue and I would greatly appreciate any advice on this.
Thank you,
Wes
Edited by: weslaney on Jul 21, 2009 11:40 PM

HI
check the planning scenario in MS31 and the PIR assignment in MS31 also check the plant assignement.
Check In MD61 you have enter PIRs in simulation version and the same version is to assigned in planning scenario
Also check T code OPU5 for LTP setting for planned orders
Regards
Anupam Sharma
Edited by: anupam sharma on Sep 3, 2010 2:33 PM

Retrieve long-term transaction history from locked users

Hi all,
I need to gather an audit report on terminated users and their transaction codes for a specific date range. We have an auditor using the FOX tool to gather information, but it only applies to currently active users. They are able to get data on each active user in a specific group from 10/30/2006 - 4/01/2009
My question is this.
What is the best transaction to use to compile a report for 3 years worth of transactions for these specific terminated users. ST03N retention only goes back 2 months, I cannot pull any long term information in STAD, and I do not have access on our Production system to SM19/SM20.
I feel pretty stuck and any help would be appreciated.
Thanks!

Thanks Lakshmi,
I have gotten similar responses about this issue. It would appear there is no feasible way to do this.
Thanks for your help!

Auto Conversionn long term fixed deposit to short term fixed deposit

Hi SAP Experrts,
We are using CFM system and I have the following scenario
We invest funds in long term fixed deposit. On maturity data LTI should automatically convert STI and the balance in LTI account should get transfered to STI account. Has any one dealt with this kind of scenario, If yes please let me know how to configure this scenario in Account determination
Thanks in Advance

Hi,
Like Prasad said you can do a valuation class transfer. But this is not available in earlier releases ( I think only from EH2).
But it would be better if we could know the business logic for such a transfer. Why do you want to transfer to a short term FD on maturity date. On maturity date, the long term FD gets matured and that closes the investment correct. In case if your requirement is that the maturity amount is invested in another short term FD, then you can as well create a new short term FD transaction for the same or in case if the FD is extended for some time then you can check with the option of roll over.
Regards,
Ravi

DPM 2012 - stand alone drive - Short/Long term protection to tape

We are migrating from BE to DPM 2012. I'm trying to configure DPM 2012 for both short term & long term protection - both using tape (stand alone drive). The goal is:
Daily backups (Mon, Tue, Wed, Thu) - 2 weeks retention
Weekly backup (Friday) - 4 weeks retention
Monthly backup (last weekly backup) on every month - 15 m onths retention
I've configured the short term protection for daily and weekly backups. Monthly backups are configured under long term protection. Daily and weekly backups are working as expected. However when it comes time for the Monthly, the DataSet copy jobs are failing.
As I understand it, DPM is expecting another drive to copy the weekly backup tape.
How I can achieve above goals ? Backup to disk is not an option.

Hi,
Any time DPM schedules a dataset copy job, you will need more than one tape drive, there is no way around that requirement.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Long-term planning: planning details of work center capacity

Hi,
we need to know what is the effect on planned production orders (generated by MPS, transaction MD40) of the flag “long-term planning” in planning details of work center capacity (table name: RC68K; field name: KAPLPL). We made a test analyzing planned orders scheduling details in Stock requirements list (MD04) and in the Planning table (CM21) in both cases: with "long-term planning" flag set and without this flag for the same work center.
The schedule of planned production order on that work center is the same in the two instance.
Could you suggest us something?
Thank you.

Hi Rudy,
Purpose for carrying out Long Term Planning to simulate impact of Future Demand Program on
u2022 Material Requirements
u2022 Capacity Requirements
u2022 Material Cost budgeting (activity by Accounts dept.)
T.Codes used -
u2022 Demand MD61, MD62, MD63
u2022 Scenario Creation MS31, MS32, MS33
u2022 LTP Variant Creation & Execution MSBT, SM37
u2022 LTP statistics Evaluation SM37, MS04
u2022 Data Set Up MS70, MSB&
u2022 Evaluation based on Set up data MCB), MCEA, MCEB, MCEC
u2022 Capacity Evaluation CM38
To Summarize -
u2022 In long-term planning, production plans for future demand programs are simulated using MRP runs with reference to the planning scenarios.
u2022 The parameters for the simulation in the simulation planning area are defined in the scenario.
u2022 The Evaluation of LTP Statistics enables identification of Material for which LTP processing was terminated.
u2022 The Data set for purchasing & Inventory Control enables reports for demand analysis
u2022 LTP run with setting for u201CLead time scheduling and capacity planningu201D enables simulation of capacity situation/overload on work centers.
Hope it is helpful to you.
Srini

I need to know the user who has created/modified a SAP Bex Query and WAD

Hi!
I need to know the user who has created and modified a SAP Bex Query and SAP Web Application Designer. Does it possible to know this information by a table or view?
Best Regards
Ramon Sanchez

Hi,
In BEx query, when you click "Queries" to open the query, the list of queries are displayed. Highlight the query, click on the "Properties On/Off' icon(right most on the top), you would see all the details.
In WAD, before opening the template, click on "Properties On/Off'" icon to see the details.

Can't fetch clob and long in one select/query

I created a nightmare table containing numerous binary data types to test an application I was working on, and believe I have found an undocumented bug in Oracle's JDBC drivers that is preventing me from loading a CLOB and a LONG in a single SQL select statement. I can load the CLOB successfully, but attempting to call ResultSet.get...() for the LONG column always results in
java.sql.SQLException: Stream has already been closed
even when processing the columns in the order of the SELECT statement.
I have demonstrated this behaviour with version 9.2.0.3 of Oracle's JDBC drivers, running against Oracle 9.2.0.2.0.
The following Java example contains SQL code to create and populate a table containing a collection of nasty binary columns, and then Java code that demonstrates the problem.
I would really appreciate any workarounds that allow me to pull this data out of a single query.
import java.sql.*;
This class was developed to verify that you can't have a CLOB and a LONG column in the
same SQL select statement, and extract both values. Calling get...() for the LONG column
always causes 'java.sql.SQLException: Stream has already been closed'.
CREATE TABLE BINARY_COLS_TEST
PK INTEGER PRIMARY KEY NOT NULL,
CLOB_COL CLOB,
BLOB_COL BLOB,
RAW_COL RAW(100),
LONG_COL LONG
INSERT INTO BINARY_COLS_TEST (
PK,
CLOB_COL,
BLOB_COL,
RAW_COL,
LONG_COL
) VALUES (
1,
'-- clob value --',
HEXTORAW('01020304050607'),
HEXTORAW('01020304050607'),
'-- long value --'
public class JdbcLongTest
public static void main(String argv[])
throws Exception
Driver driver = (Driver)Class.forName("oracle.jdbc.driver.OracleDriver").newInstance();
DriverManager.registerDriver(driver);
Connection connection = DriverManager.getConnection(argv[0], argv[1], argv[2]);
Statement stmt = connection.createStatement();
ResultSet results = null;
try
String query = "SELECT pk, clob_col, blob_col, raw_col, long_col FROM binary_cols_test";
results = stmt.executeQuery(query);
while (results.next())
int pk = results.getInt(1);
System.out.println("Loaded int");
Clob clob = results.getClob(2);
// It doesn't work if you just close the ascii stream.
// clob.getAsciiStream().close();
String clobString = clob.getSubString(1, (int)clob.length());
System.out.println("Loaded CLOB");
// Streaming not strictly necessary for short values.
// Blob blob = results.getBlob(3);
byte blobData[] = results.getBytes(3);
System.out.println("Loaded BLOB");
byte rawData[] = results.getBytes(4);
System.out.println("Loaded RAW");
byte longData[] = results.getBytes(5);
System.out.println("Loaded LONG");
catch (SQLException e)
e.printStackTrace();
results.close();
stmt.close();
connection.close();
} // public class JdbcLongTest

The problem is that LONGs are not buffered but are read from the wire in the order defined. The problem is the same as
rs = stmt.executeQuery("select myLong, myNumber from tab");
while (rs.next()) {
int n = rs.getInt(2);
String s = rs.getString(1);
The above will fail for the same reason. When the statement is executed the LONG is not read immediately. It is buffered in the server waiting to be read. When getInt is called the driver reads the bytes of the LONG and throws them away so that it can get to the NUMBER and read it. Then when getString is called the LONG value is gone so you get an exception.
Similar problem here. When the query is executed the CLOB and BLOB locators are read from the wire, but the LONG is buffered in the server waiting to be read. When Clob.getString is called, it has to talk to the server to get the value of the CLOB, so it reads the LONG bytes from the wire and throws them away. That clears the connection so that it can ask the server for the CLOB bytes. When the code reads the LONG value, those bytes are gone so you get an exception.
This is a long standing restriction on using LONG and LONG RAW values and is a result of the network protocol. It is one of the reasons that Oracle deprecates LONGs and recommends using BLOBs and CLOBs instead.
Douglas

I'm an American living on a timed (though long-term) assignment in Ireland. I have both American and Irish bank accounts and addresses. I have two Qs. 1. Can I use the US Adobe site when in Ireland? Or will my physical location prevent me from doing so? 2

I'm an American living on a timed (though long-term) assignment in Ireland. I have both American and Irish bank accounts and addresses. I have two Qs. 1. Can I use the US Adobe site when in Ireland? Or will my physical location prevent me from doing so? 2. I am working for a not-for-profit organization. Is there a special pricing plan for non-profits, similar to the plans for students, small business, etc? Thanks for whatever help you can give me. (P.S. As a potential customer and past user of Adobe products for 15 years, I find it INCREDIBLY FRUSTRATING that I cannot speak with any Adobe representative, but am continually re-routed instead to a public forum to get what I hope will be accurate information. Not good, Adobe. Your products are amazing. Your customer service leaves a lot to be desired. I don't mean that with disrespect, but as honest feedback.)

Hi bookchic
Thanks for your feedback.
Non-profit pricing is available to eligible institutions via the VIP program which is sold by resellers - see Eligibility guide
For details of resellers please check here: Adobe Platinum Partners – Value Incentive Plan
If you wish to purchase an individual plan via Adobe.com the country of your Adobe ID will determine which site you order from.
Kind regards
Bev

Hi I want to buy an unlocked iPhone 5in the Middle East. I want to know if I will be able to use my iPhone and all its applications when we go back to live in the US for long term.

Hi I want to buy an unlocked iPhone 5 in the Middle East. I want to know if I will be able to use my iPhone and all its applications when we go back to live in the US for long term.
Thank you

Apple Online Store sells unlocked iPhone in the following countries: Australia, Austria, Belgium (French, Dutch), Brazil, Canada (English, French), China, Czech Republic, Denmark, Finland, France, Germany, Hong Kong (English, Chinese), Hungary, Ireland, Italy, Luxembourg, Malaysia, Mexico, New Zealand, Netherlands, Norway, Poland, Portugal, Singapore, Spain, Sweden, Switzerland (French, German), Taiwan, Thailand, United Arab Emirates, United Kingdom, and United States.
You can probably be absolutely sure any other source will be carrier locked
It also appears that only Zain offer unlocking (of all the ME carriers ) in Jordan and Bahrain
A ME iPhone 5 ( A1429 GSM )will not work on US LTE when you return

QM, Inspection Lot with Long-Term and Required Characteristic

I want to know if it is possible to print a Certificate of Analysis (COA) with a required, long-term characteristic, if the inspection lot is using the special function "Short-Term Inspection Completed". And then a special Usage decision is made.
Our dilemma is that we have materials that must be shipped for pre approval with a COA, before certain QM tests have been made, and we want to be able to print the COA, but the required flag stops us.
So, what we really want is to require the characteristic if it is one usage decision and not require it if it is a special usage decision related to a "Short-Term Inspection Completed" inspection lot.
We also, would prefer not to have multiple COA profiles to handle, this would cause too much extra data handling.
Thanks,

Hi,
I If your Characteristic , whether it is short term or long term, is not marked as REQUIRED characteristic then there will be sure botheration for you to perform UD w\o performing the RR for them. It will prompt a message, which tends to be warning normally. But the characteristic is not REQUIRED and is OPTIONAL one then there will be no message , no botheration.
But one thing is very clear that if you want to print the Result of some MIC or characteristic,
then
1. it must be recorded for the result.
2. it must be maintained in the COA profile.
At the other hand if you don't wish to print the result of some characteristic, whether it is short term or long term, don't keep it in the COA profile. System will not print it for you.
Regards,
Shyamal

Can I delete renders and previews when putting projects into long term storage?

I want to shrink the size of my longe term storage folders. Would it be ok to just delete the previews and renders?
Any project opened in the future is going to rebuild them anyway..
Thanks

I agree with Joe (nothing unusual there), and, as stated, how you do the mechanics might well depend on how you establish your folder structure, when you start the Project. I keep everything (including copies of any Assets), in a folder structure below the Project's name. This article goes into more detail: http://forums.adobe.com/message/4028199#4028199
With such a structure, it is easy to Delete, say Media Cache files, etc., before using Project Manager, or just setting it to NOT copy those files over. It also makes a final Deleting easy.
I do sacrifice a bit of performance, by not spreading, say my Render files, my Audio and my Video, over separate physical drives, but then, when the Project is done, tracking down everything is easy, as I just Delete the root folder, [Project Name], and everything goes with that.
Good luck, and glad that you asked, before archiving a bunch of Projects, or Deleting a bunch of files.
Hunt

How sale forecast transfer to COPA via KSPP and not related to long term,

Dear all experts,
i am trying to transfer my sale forecast to COPA via KSPP. However, this is not related to product group and long term planning.
any configuration involve?
what is the step that i need to proceed?
please advise.
CJ

I think you are misunderstood something. The KSPP transaction is used to transfer the activity for the planned order; either long-term or short term to cost center activity type planning (in scheduled activity; and with reconciliation function, can copy to plan quantity).
It is not related to sales forecast from COPA to SOP which KE1E t-code is used.
For KSPP, you can set the transfer control in configuration. Alternatively, without configuration, you can use flexible transfer (menu Environment -> Flexible transfer). This provide that you have the master data in PP and CO setup correctly.
Rgrds,

DPM 2010 Short and Long Term goals

My question is related to size restrictions.
Our existing DPM 2010 is setup with two protections groups, System State, and a Default (file) protection group. Both are set up the same. A co worker recently had to re-create a protection group due to his negligence and deleted it without looking at how
it was setup in the first place, since then I've been having errors in backing up to tape:
Synchronization frequency is set to just before recovery point
Short term goals are:
Recovery points are at 8:00 AM, 12:00PM, 6:00PM Everyday, Express Full is 8:00PM Everyday
Long term goals are:
Retention range 2 weeks, Frequency Weekly (1 recovery point every 1 week for the last 2 weeks)
Full backups are set to Saturday at 11:00 PM
Here's the thing, we have 3x3TB external drives that, historically have been swapped out weekly (Monday mornings, using Firestreamer for tape emulation). Since the co-worker broke, and re-created the protection groups, when we view DPM Console on Monday
morning, we see that the backup jobs are failing, the 3TB drive is full.
Could this 3TB drive be full due to this weekly swapping out when it is set to a retention range of 2 weeks? Obviously, it could be because the protection group actually contains that much data, but I'm trying to wrap my head around sync frequency, recovery
points and how that works into recovery goals.
Any help is appreciated.

Hi,
Right. After the registry key is added, all new recovery points written to tape will show they expire at midnight (12:00am) on they day they expire so any tape jobs that run later that day will be able to use that tape after the expiry
date.
To prevent tape jobs from failing because there are no tapes available, you can also add this registry value.
During a new tape backup or if a tape becomes full and there are no other tapes marked free, Free (contains data) or expired in the library, DPM will raise an alert to prompt for another free tape to continue backup. The same is true during a
restore, if the needed tape is not in the library an alert will be raised. By Default, DPM It will wait for
1 hour before failing the job.
This prompting timeout can be configured by the registry entry “PromptingTimeOut” under “HKLM\Software\Microsoft\Microsoft Data Protection Manager\1.0\Prompting”
PromptingTimeOut:REG_Dword:43200000 (dec) = 12hrs
The Formula is (#hrs * 1000 * 60 * 60)
1HR = 1*1000*60*60 = 3600000 decimal
So for each hour to wait, multiply by 3600000.
8hrs = 28800000 decimal
Restart the DPMRA service.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.

Long-Term Trends of Query and Statistcs - BI Application Type

Similar Messages

Maybe you are looking for