Long term x short term characteristics

Dear colleagues,
Easy one.
Where exactly to check if the characteristic to be checked is a shor term one or a long term one ?
Regards
Fernando Luz

QP03->enter material->plant->enter>go to char level>select mic/char->go to control indicator--->check whether "Long term inspection is ticked" if not its short term.
There could be another ways also but this is how we see from inspection plan.

Similar Messages

Showing Long-term characteristics are still open

Hi QM expert,
i am using inspection type 03..after result recoding of all operation..i do UD..and save that...
but show Long-term characteristics are still open
status show LTIN STIC STUP
kindly suggest me what to do
Regards
akil

Hi,
my client require in process inspection inspection type 03 and and after GR inspection type 04.
i have ticked in material master Inspect with Material Specification, in 03.inspection type ..
.then in result recoding MIC not coming..then again i have change .i have ticked Inspection with Task List.then and un ticked Inspect with Material Specification then show all MIC at the time of result recoding .
what ever MIC i have maintained in routing operation
..now i do result recording with value and and accept all MIC value....
then i do UD...i select A ( accept UD) then save...but when open UD screen..show the massage Long-term characteristics are still open near the Insp. End Date
i save that
then show the status ...LTIN STIC STUP
again i opened result recoding and add new MIC and accept that and saved...
then i opened UD screen...and i selected again A (accept) and saved...
but agian showing same massage
Regards
akil

LONG TERM INSPECTION CHARACTERISTICS

can any body guide me my quality plan have short term and long term characteristics 0010 operation i maintained all characteristics is short term characteristics and 0020 operation all characteristics link with class i am not maintained short and long term
my query is i am not enter any values in 0010 operation i enter 0020 operation characteristics but once i done usage decision this characteristics not update for batch means if i maintain any long term characteristics in quality plan system should not update for batch characteristics
if any body done this business kindly revert me this is urget .

No need that all characteristic should have status '5'.
But the result only which has status '5' would be updated to batch characteristic value.
If a batch characteristic is long-term and required characteristic, the status would be '1' when first usage decision.
When you record the result for the long-term characteristic, the status would changed '5'.
Then you should save usage decision againg for batch characterstic update.
Regards
Luke

Outstanding Long-Term & Short-Term Characteristics

Hi all,
In QA32 there are Number of outstanding long-term & short-term characteristics, and according the information within F1 help, only if no short-term characteristics are open, the usage decision for the inspection lot can be made. However, I have several inspection lots which have already been made UD with outstanding short-term characteristics, please refer to following screenshot:
Danny

Dear Danny,
The normal standard process will not prevent you from giving UD if the result recording is done.
For this you need to use a status profile which will mandate that the result recording has to be completed for the UD to be done.
Regards
GN

Short term and Long-term inspection and characteristic

Hi all,
In the SAP portal, they mentioned about Long-Term Inspection with Long-Term Characteristic, and Short-Term Inspectoin with Short-Term Characteristic.
May I know what is the usage on the above and how to setup in the system?
Thanks
YY

Long Term Characteristics Indicator is marked in the Control Indicators Tab of an MIC.
Long Term Inspection is used when the Business Requirement is to do Results Recording after Usage Decision.
In normal circumstances, i.e. Short Term Inspection, system won't allow us to do RR once UD is given.
Best Regards,
K. Raghavendra Nayak

Auto Conversionn long term fixed deposit to short term fixed deposit

Hi SAP Experrts,
We are using CFM system and I have the following scenario
We invest funds in long term fixed deposit. On maturity data LTI should automatically convert STI and the balance in LTI account should get transfered to STI account. Has any one dealt with this kind of scenario, If yes please let me know how to configure this scenario in Account determination
Thanks in Advance

Hi,
Like Prasad said you can do a valuation class transfer. But this is not available in earlier releases ( I think only from EH2).
But it would be better if we could know the business logic for such a transfer. Why do you want to transfer to a short term FD on maturity date. On maturity date, the long term FD gets matured and that closes the investment correct. In case if your requirement is that the maturity amount is invested in another short term FD, then you can as well create a new short term FD transaction for the same or in case if the FD is extended for some time then you can check with the option of roll over.
Regards,
Ravi

[TRM-TM] Transfer from Long-term liab. to Short-term liab.

When I create a long-term loan using the transaction manager, it will be posted to the long-term liab. account, but after the remaining period of a loan become shorter than 1 year, I need to transfer it from the long-term liab. account to short-term liab.
I want to know if there is standard system function can fulfill this requirement, or someone could suggest me a solution.

Hi,
Yes you can do this. You can use capital reposting - grouping/splitting of loans function for acheiving this.
You can group this loan and transfer the remaining capital of this loan to another loan. It is generally used for takeover of loan by a different partner, but in your case specify the same partner.
The Group Contract function allows you to create one contract from several contracts for accounting purposes or to transfer parts of several contracts to another contract. The outstanding capital (remaining debt) of one or more contracts is transferred either fully or in part to another contract. This is necessary, for example, when a different borrower takes on the remaining debt of a loan.
Check this link for more info:
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/f2/99483f18e7e07fe10000000a114084/frameset.htm
Regards,
Ravi

How to automatic post the profit OR loss to short term Capital / long term

Hi,
How to automatic post the profit OR loss to Short term Capital gain / Long term capital gain on posting of Sales transaction ?
Incase the inventory item is less than one year older then the difference should be posted to the G/L of Short term Capital gain, where as if the item is more than one year older then the difference should be posted to the G/L of Long term Capital gain
Thanks in advance
Samir Gandhi

I don't think any logic can be used to reach your goal. How B1 system should post in such a fussy conditions?
In case the inventory item is less than one year older then the difference should be posted to the G/L of Short term Capital gain
How can you identify these items? An inventory is a moving concept like a river. It come and goes with all different ways even as to value and revalue them.
Please follow the common sense to face reality.
Thanks,
Gordon

Are long term backups created from short term tape full + incremental?

Does DPM use short term tape, Full + incrementals to create the long term Tape backups?
For example, if i run a short term to tape full with incremental against a computer with a 1 week retention then run a long term recovery point every 1 week for for 4 weeks and 1 recovery point every month for 6 months.
will all the long term RPs actually run a full backup or will they build one from the previous full plus incremental?
My question is two fold,
1. i am concerned about total long term storage
2. I am concerned about time needed to complete the full backup.
Thanks!

DPM doesn't support incremental backups to Tape. Tape Backups are always full.
Regards, Trinadh [MSFT] This posting is provided AS IS with no warranties, and confers no rights. If you found the reply helpful, please MARK IT AS ANSWER. Looking for source of information for DPM? http://blogs.technet.com/b/dpm/ http://technet.microsoft.com/en-in/library/hh758173.aspx

DPM 2010 Short and Long Term goals

My question is related to size restrictions.
Our existing DPM 2010 is setup with two protections groups, System State, and a Default (file) protection group. Both are set up the same. A co worker recently had to re-create a protection group due to his negligence and deleted it without looking at how
it was setup in the first place, since then I've been having errors in backing up to tape:
Synchronization frequency is set to just before recovery point
Short term goals are:
Recovery points are at 8:00 AM, 12:00PM, 6:00PM Everyday, Express Full is 8:00PM Everyday
Long term goals are:
Retention range 2 weeks, Frequency Weekly (1 recovery point every 1 week for the last 2 weeks)
Full backups are set to Saturday at 11:00 PM
Here's the thing, we have 3x3TB external drives that, historically have been swapped out weekly (Monday mornings, using Firestreamer for tape emulation). Since the co-worker broke, and re-created the protection groups, when we view DPM Console on Monday
morning, we see that the backup jobs are failing, the 3TB drive is full.
Could this 3TB drive be full due to this weekly swapping out when it is set to a retention range of 2 weeks? Obviously, it could be because the protection group actually contains that much data, but I'm trying to wrap my head around sync frequency, recovery
points and how that works into recovery goals.
Any help is appreciated.

Hi,
Right. After the registry key is added, all new recovery points written to tape will show they expire at midnight (12:00am) on they day they expire so any tape jobs that run later that day will be able to use that tape after the expiry
date.
To prevent tape jobs from failing because there are no tapes available, you can also add this registry value.
During a new tape backup or if a tape becomes full and there are no other tapes marked free, Free (contains data) or expired in the library, DPM will raise an alert to prompt for another free tape to continue backup. The same is true during a
restore, if the needed tape is not in the library an alert will be raised. By Default, DPM It will wait for
1 hour before failing the job.
This prompting timeout can be configured by the registry entry “PromptingTimeOut” under “HKLM\Software\Microsoft\Microsoft Data Protection Manager\1.0\Prompting”
PromptingTimeOut:REG_Dword:43200000 (dec) = 12hrs
The Formula is (#hrs * 1000 * 60 * 60)
1HR = 1*1000*60*60 = 3600000 decimal
So for each hour to wait, multiply by 3600000.
8hrs = 28800000 decimal
Restart the DPMRA service.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.

Does Best Buy have a: Defined Mission Statement? Defined Vision? Long Term/Short term objectives?

Does best buy have, in terms of as a company: A Defined Mission Statement? A Defined Vision? A long Term and/or Short Term Objective? This is for a senior level college report. I could not find anything on your official website. Please ignore the category. It was chosen at random. Thank you

Hi Tomas,
Best Buy doesn't have an official mission statement per se, but you can learn about our Customer Promise by visiting our Community Relations site:
http://www.bby.com/about-best-buy/
This site also has information on our giving partnerships, national and community grant programs, and links to both our quarterly and annual earnings reports.
I hope this helps!
Aaron|Social Media Specialist | Best Buy® Corporate
Private Message

DPM 2012 - stand alone drive - Short/Long term protection to tape

We are migrating from BE to DPM 2012. I'm trying to configure DPM 2012 for both short term & long term protection - both using tape (stand alone drive). The goal is:
Daily backups (Mon, Tue, Wed, Thu) - 2 weeks retention
Weekly backup (Friday) - 4 weeks retention
Monthly backup (last weekly backup) on every month - 15 m onths retention
I've configured the short term protection for daily and weekly backups. Monthly backups are configured under long term protection. Daily and weekly backups are working as expected. However when it comes time for the Monthly, the DataSet copy jobs are failing.
As I understand it, DPM is expecting another drive to copy the weekly backup tape.
How I can achieve above goals ? Backup to disk is not an option.

Hi,
Any time DPM schedules a dataset copy job, you will need more than one tape drive, there is no way around that requirement.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Lot Sizing for Short/Long Term

Hello All,
I tried the lot sizing with the short term/Longterm pattern..
But I'm facing the following problem..
I have maintained periodic lot sizing according to the planning calendar(Weeks from Saturday to Friday) for the first month...( Requirement date = period end)
And for the other 2 years I have defined periodic lot sizing with Monthly lot size ( Requirement date = period end).
But running MRP, the system Cumulates all the monthly requirement from the 2 nd period and creating the order proposal with the order end date of the months first planning calendar week. But I'm expecting the system to create the order proposal with the month's last date as the order end date .
Whether my expectation is incorrect or any other settings to be maintained to achieve this.
Thanks & regards,
Mahesh

Hello Mahesh,
You can get the results without maintaining the planning calendar..Just change the lot size procedure WB :weekly lot size" and take out the planing calendar and maintain the settings as per below.
In the period lot sizing procedure WB maintain the number of periods 1 for the period of short term period with weekly lot size. then in "end of the short term period" maintain the initail value " months: and define number of periods 24.
maintain the same values for long term period i.e period 1 with period lot sizing procedure (monthly lot size).
By doing the above you will get the weekly lot size for the first 2 years and then monthly lot size for the rest of the requirements.
If helpful rewards your points.
Regards
TAJUDDIN

Bifurcation of Short term & Long term Gains possible in Treasury??

Dear All,
Can anyone please let me know whether we can bifurcate the short term and long term gains in CFM.I require the bifurcation for tax & reporting purpose.
Please help.
Thanks & Regards
Ramesh Nair

Hi Ravi:
I ve been reading carefully what you suggest. what sap note # 1515125 implement is realy what I need for my Client about current portion of a long term debt.
But reading this note and the related ones referred 1515126 & 732499 I really do not know wich is the solution for my client.
The system status of my Client is EA-FINSERV 600 Level 0018 SAPKGPFD18
The afffected releases regarding note 732499 are
SoftwareComponent       Release            From Release     To Release    And subsequent
EA-FINSERV                        10                     110                   110
EA-FINSERV                        200                   200                    200                X
BANK/CFM                         46C                     463_20           463_20
The afffected releases regarding note 1515125 & 1515126 are
Software Component        Release             From Release    To Release   And subsequent
EA-FINSERV                       604                      604                     604
EA-FINSERV                       605                      605                      605
Obiously regarding what i mention I do not have TPM44 (is TBB4) and TPM15M
TPM15 only hs Product Groups Securities and Loans (not OTC tx)
At TRGC_COM_VALCL table there is no entry to set the flag "current portion of a long terms debt/assets"
So wich is the solution in my case? I will appreciate any help
best regards
Claudio

Short, medium and long term planning in SNP

Hi,
can somebody explain me what Short, medium and long term planning mean in SNP?
Lets, say I have this scenario:
If I have a product with SNP horizon of 35 days, which means that the product is planned in SNP only after 35 days from today. Only PPDs deals with orders in these 35 days.
I have a 3 planning books
short term with 30 days from today
medium term with 7 months from today and
long term with 2 years from today.
When I say short, medium and long term planning in SNP what exactly happens in these ?? What do users usually do in these books?
SNP horizon is 35 days and the short term book is 30 days long, in which SNP does nothing. What's the use of this book?
Thanks.

When I say short, medium and long term planning in SNP what exactly happens in these ??
Nothing much from a technical stand point.
What do users usually do in these books?
Check the Time Bucket Profile for the different books. The short Term Book will be in days, the mid term in weeks and the long term in months/quarters etc. The different books allows users to see the keyfigures in different time-based aggregate level.
But if Heuristic is executed then behaviour will be different. Remember SNP Location Heuristic run uses the bucket of the data view to compute the Net Requirement and then try creating Receipts in each bucket within the time horizon of the data view using suitable master data. So if you run Location Heuristic in the short Term (daily) view then you will have many receipts one per day most likely. If you run in mid-term Weekly view then there are less number of receipts one receipt per week till 7 months. likewise for the long term view.
SNP horizon is 35 days and the short term book is 30 days long, in which SNP does nothing. What's the use of this book?
Maybe just to see the data. Location Heuristic run will not generate any new receipt.
Thanks,
Somnath

Long term x short term characteristics

Similar Messages

Maybe you are looking for