Long text at inspection completion.

Hi everyone.
I have following scenario:
1.- Quality certificate should get variable data when it is printing. User needs to choice from a list, what he will print for certificates, that must be done at Usage decision.
2.- I think using UD long text at the time to save UD can solve my issue.
3.- I just can get automatically UD long text when I force inspection completion.
How can I get automatically UD long text without force inspection completion????
Regards.

Hi everyone..
I think I wasn't clear in my initial request....this is regarding long text for UD....
Since you force inspection completion in UD (QA11), and save your UD, system automatically show you other screen "Change long text on usage decision", and you can enter any text.
But that only happend when you force inspection completion....when you don't force inspection completion, long text can't be updated....
I need that screen "Change long text on usage decision" appear every time, with or wihout forcing inspection completion...
I'll really appreciate your support.
Best Regards.
Juan.

Similar Messages

Displaying operation long text in results recording screen

Hi, all!
I am trying to understand why I cannot display the operation long text when in results recording screen (either QE51N or QE01 transaction will not support displaying of operation long text).
I have checked all areas that I could think of in config to see if there is a display setting that will require to be activated and I could not find anything under Results recording, Inspection planning or General settings. I also tried to see if user settings may be making a difference and it did not. The SAP Help portal when talking of long texts available in results recording lists the following: Long texts for inspection lot, inspection method and inspection charcateristic. Nothing about operation long text.
However, the text is printed on the inspection instruction standard form.
SAP Notes has nothing on the subject that I could find.
So, as a last resort, I would like to ask if any other Quality Management specialist came across this and spent any time in determining if this can be done and why the information would not be displayed standard in the transactions. My client would prefer not to have to print the instructions in order to see the entire text. However, I do not see any standard way to have it displayed.
Any help would be greatly appreciated.
Thank you in advance!

Hi Senthil,
Don't know it will help or not. But if your MIC is qualitative then you can use the long text of catalog code in QS42.
Please refer below screen,
Click on the which help to maintain the long text.
Regards,
Sandip

Long text updation using QSS_TEXT_PROCESSING

Hi,
I am entering Long text in Inspect. description QE17 using QSS_TEXT_PROCESSING from custom program.
I could able to open editor (which comes in SAP standard transaction QE17) and enters text .Also the text module is been created.
If you check STXH table -there is an entry, But long text indicator is not being updated.
Can you please advice me how to use QSS_TEXT_PROCESSING function module or any means of updating Long text for Insp.description .
Thanks in Advance,
R.Gopal

Hi,
I think in READ_TEXT , the paramters what you are passing incorrect.
go to that CJ20n text block -> doublick.. it will take you to the standard text screen
goto GOTO->HEADER in menu... take the paraemters from that screen.
Text Name
Language
Text ID
Text Objec
regrds,
Rama reddy
Edited by: ram reddy on Jul 14, 2009 7:18 PM

Regarding Saving of LONG TEXT in QP02/QP03

Hi All,
I am saving the long texts for Inspection Characteristics using SAVE_TEXT.
The Text is getting saved but i am not able to see it in Display (QP03).
To see it in display I need to Save the text first in QP02 and then it is available in QP03.
I tried using COMMIT_TEXT after SAVE_TEXT..but it's not happening.
Your help is needed on this.
Regards,
Priyanka

Hi
one way to upload the long text is to run a bdc.... in BDC check the long text and put the default data in the text with the length greater than 40 characters ........now use the create_text to upload the long text with the data u need to upload with....
second one in uploading the BOM header i had also updated a field LTXSP in table STKO for those BOM's..this field is required to be updated for the display of long text in BOM.....
Similarly u can also find the field in the table for Inspection plan.....i m sory i dnt know much about inspection plan....but there also a similar logic can be applied....can u tell me about the table u are using to update the QP02
kanishak

Long text problem while uploading Inspection plan through BDC.

Hi,
I am facing some problem while uploading the inspection plan. There are few MICs for which we are having long text, while uploading the inspection plan through BDC - some other long text is getting copied into the MIC's long text. After checking I came to know that in function module, read_text - some text which is stored in ABAP memory is getting copied into the inspection plan.
I am working in SAP release 4.7. I have checked with SAP notes: 97419, but it is also not satisfying.
Waiting for quick solution.
Thanks in advance.
Fahié

Hi a®s,
Thanks a lot for your kind reply.
My requirement is I want to maintain long text for few MICs (which are not having long texts at MIC level) in inspection plan (QP01).
When I am trying to manually assign the MIC's to inspection plan (QP01), long text is copied whereas I am not clicking the long text icon in (QP01). Long text is not maintained in MIC level, still some long text is copied to this MIC. This was also happening while uploading the inspection plan thro' BDC.
I believe what you have mentioned about function module SAVE_TEXT cannot be used here since long text is already copied before we pass the long text. Also if we pass some long text, still apart from the long text what we have passed there is some other long text copied (extra long text).
Waiting for quick solution.
Thanks in advance.
Fahié

How to call "long text" of master inspection characteristic in ALV

Dear All,
we have created customized QM report in ALV which shows Result, Valuation and Short text for each MIC against each inspection lot. Can we call long text also in the ALV.
Please guide how to call it in ALV?

just implement some function on the ALV toolbar, read the long with FM READ_TEXT and show it to the user e.g. using CATSXT_SIMPLE_TEXT_EDITOR.

Activating Subscript For Inspection characteristic Long Text in T-code QE11

Hello All
I have maintained the inspection characteristic long text in QP01 as " H2O" where 2 is in Subscript.
No when I see the inspection characteristic long text in T-Code (QE11, QE12 & QE13) it appear as (H2O) & here "2" is not shown in the subscript.
So please tell how can we activate subscript for T-Codes (QE11,QE12 & QE13) so that it is displayed correctly.
Regards
Rahul Bhardwaj

Hello All
can anyone please help me out on this. I am there must be a solution for the same.

How to enter super script inspection characteris long text

Dear All,
our user want to enter 10 to the power of 4 ,or upto 10 to the power of 9 in inspection characteristics long text, kindly guide me for the same.
Rgds,
Mani

Hello Manish,
I think the following thread in QM forum has the solution to your question.
Re: Subscript in long text
Regards
Prasad K

Default values for long text for mic in inspection plan

hi,
Some long text are coming default when i am creating inpection plan for mic.
This is coming for only particular plant. For other plant it is not coming. Is there anywhere we can make it as default for a particualar line item . ie for particular characteristics i.e 10, 20 etc
sathish. R

Hi,
I am not sure , whether you are mentioning about Long text for MIC or Default insp char number (10,20,30..) in the insp plan.
If you are talking about Insp char number in the insp plan . you can specify the same in SPRO , QM->Q planning ->Insp planning -> General -> Maintain profiles for default values.
Regards
K.M.Arun

Alert : long text not complete

Hi all,
I manage specific alerts in my BPM.
I have defined it as "dynamic text" alerts in ALRTCATDEF.
These alerts are well thrown by PI however I can see only the first caracter of the long text.
My version is PI 7.0 SP8.
Is it a known issue ?
Thanks in advance,
J.C.

Hi JC,
This may not be an issue at all...and just the way alerts are shown in the inbox.
Just right click on the table cell where you see the first character of the text, right click and select "view source".
You should be able to see the long text within the HTML source.
Though not a solution but this can be used to test out the alert.
Regards
Gaurav
PS: Please reward points for helpful answers.

How to UPLOAD Long Text in QS21

Dear All,
I have written BDC to upload Master Inspection Characterstics,
The Problem is I need to upload the long Text, (which is of some 250 chars).
How to do this.
Help is appriciated.
Thanks in advance
Arun

Hi,
I think there is an ICON to enter the long text.
U can start filling the LONG text here using
RSTXT-TXLINE(03) - this takes around 70 chars the next
chars in RSTXT-TXLINE(04) and so on. U can get this
in SHDB recording.
Regards,
GSR.

How to get Long text in report from FBL3N

Hi,
I need to get Long Text from FBL3N (G/L Account Line Item Display) in my report.Can anyone tell me in which table it is stored?

Hi
These long texts are not stored completely in any tables
where as the parameters of these texts like OBJECT,OBJECTNAME and ID, LANGUAGE are stored in STXH table
You have to pass these 4 parameters to the fun module READ_TEXT and to fetch the text.
Double click on the long text will goes to text editor
from menu GOTO-> HEADER you will see the above 4 paramters
see the doc of READ_TEXT fun module
READ_TEXT
READ_TEXT provides a text for the application program in the specified work areas.
The function module reads the desired text from the text file, the text memory, or the archive. You must fully specify the text using OBJECT, NAME, ID, and LANGUAGE. An internal work area can hold only one text; therefore, generic specifications are not allowed with these options.
After successful reading, the system places header information and text lines into the work areas specified with HEADER and LINES.
If a reference text is used, SAPscript automatically processes the reference chain and provides the text lines found in the text at the end of the chain. If an error occurs, the system leaves the function module and triggers the exception REFERENCE_CHECK.
Function call:
CALL FUNCTION 'READ_TEXT'
EXPORTING CLIENT = SY-MANDT
OBJECT = ?...
NAME = ?...
ID = ?...
LANGUAGE = ?...
ARCHIVE_HANDLE = 0
IMPORTING HEADER =
TABLES LINES = ?...
EXCEPTIONS ID =
LANGUAGE =
NAME =
NOT_FOUND =
OBJECT =
REFERENCE_CHECK =
WRONG_ACCESS_TO_ARCHIVE =
Export parameters:
CLIENT
Specify the client under which the text is stored. If you omit this parameter, the system uses the current client as default.
Reference field: SY-MANDT
Default value: SY-MANDT
OBJECT
Enter the name of the text object to which the text is allocated. Table TTXOB contains the valid objects.
Reference field: THEAD-TDOBJECT
NAME
Enter the name of the text module. The name may be up to 70 characters long. Its internal structure depends on the text object used.
Reference field: THEAD-TDNAME
ID
Enter the text ID of the text module. Table TTXID contains the valid text IDs, depending on the text object.
Reference field: THEAD-TDID
LANGUAGE
Enter the language key of the text module. The system accepts only languages that are defined in table T002.
Reference field: THEAD-TDSPRAS
ARCHIVE_HANDLE
If you want to read the text from the archive, you must enter a handle here. The system uses it to access the archive. You can create the handle using the function module ACHIVE_OPEN_FOR_READ.
The value '0' indicates that you do not want to read the text from the archive.
Reference field: SY-TABIX
Default value: 0
Import parameters:
HEADER
If the system finds the desired text, it returns the text header in this parameter.
Structure: THEAD
Table parameters:
LINES
The table contains all text lines that belong to the text read.
Structure: TLINE
Exceptions:
ID
The text ID specified in the parameter ID does not exist in table TTXID. It must be defined there together with the object of the text module.
LANGUAGE
The parameter LANGUAGE contains a language key that does not exist in table T002.
NAME
The parameter NAME contains the name of a text module that does not correspond to the SAPscript conventions.
Possible errors:
The field contains only blanks.
The field contains the invalid characters * or ,.
OBJECT
The parameter OBJECT contains the name of a text object that does not exist in table TTXOB.
NOT_FOUND
The system did not find the specified text module.
REFERENCE_CHECK
The text module to be read has no text lines of its own but refers to the lines of another text module. This reference chain can include several levels. For the current text, the chain is interrupted, that is, one of the text modules referred to in the chain no longer exists.
WRONG_ACCESS_ TO_ARCHIVE
The exception WRONG_ACCESS_TO_ARCHIVE is triggered if an archive is accessed using an incorrect or non-existing archive handle or an incorrect mode (that is, read if the archive is open for writing or vice versa).
<b>Reward points for useful Answers</b>
Regards
Anji

Smart Form Long Text

Dear Guys
I am trying to print long text stores at line Item of ME 23n Text Editor, in Smart From.
I am calling a BAPI for reading Purchase requistion details. The itab is also showing complete paragraph of text. But when I write it on smart from, previw is not showing complete paragraph. Infact many space is still left in smart form column.

Thnx Subramanian PL for replying.
When user writes text in ME23N text field, he normally use Enter Key many times to go to next line but while displaying it on a smart form using a loop the text also breaks unexpectedly due to those Enter Key press by user,while still there is more space to write the text in a sigle line on smart form.
To avoid above problem I first store all the text belong to a single papragraph in a variable string of smart from. But now when I try to display this text on smart from it is missing few last lines. Infact while debugging it, I can see that text is stored completely in variable.
Message was edited by:
Adnan Maqbool

Text Wrapping issue in Long Texts in ECC 6.0

Hi,
We are migrating Tasklist data from SAP 3.1i system to SAP 6.0. So we were moving the existing Long Text in 3.1i with the same paramenters to 6.0, I am facing an issue of text Wrapping(while displaying).
I am updating complete header data like - TDID, TDOBJECT, TDNAME, Lang, TDFORM(SYSTEM as in 3.1i), Version, Line Size(72 as in 3.1i), Number of Lines by using SAVE_TEXT FM.
I can see the text is updated properly but when i open the text in display mode(With PC Editor), i can see the text getting wrapped. Line size is limited to 40 Characters whereas in 3.1i its 72 characters.
Please help me here.
Thank you.
Prasad

Actually i tested with READ_TEXT function module. All parameters are fine, matches exactly with 3.1i but i am facing this issue while displaying.
In display mode - in 3.1i Ruler shows 7.2 Inches(72 Characters) whereas in 6.0 its 4 inches(40 Characters). Should i go for any settings change so that i can see complete 72 characters in 1 line.
Prasad

How to download and upload long text for project, WBS , Network,

Hi all,
I have two isssues.
1) I am extracting Projects, WBS , Network , Network activity and network activity element from a SAP 4.7 system using bapi's
BAPI_PROJECTDEF_GETDETAIL
BAPI_PROJECT_GETINFO
BAPI_NETWORK_GETINFO
BAPI_BUS2054_GETDATA
I am able to get all the details except long text. I want to know how do i extract the long text other than getting it manually by using select_text and Read_text Function module, is there any bapi to achieve this.
The reason why i am not using Function modules Read_text and Write_text is, object name( TDNAME ) value stored in STXH table for project, wbs and network are the project, wbs and network itself so i dont have any issues with this but the TDname value for activity and activity element are completely different ( Routing number and counter is stored respectively ) which i am not getting as the part of the bapi(BAPI_NETWORK_GETINFO) output.
2) I have to upload the extracted Project and it sub object data to ECC 6.0 system , i am able to achieve this by using BAPI's BAPI_PROJECTDET_CREATE, BAPI_PROJECT_MAINTAIN and BAPI_NETWORK_MAINTAIN. I am not able to load the longtext for the same, is there any way to load the long text .
All help will be greatly appreciated and rewarded.
Thanks & Regards,
Rajanidhi Rajasekeran.

I don't think there is any BAPI to do it.
We are doing it by read_text & edit_text . required fields for text name can be fetched by following select
if not e_activity[] is initial.
    select aaufnr aaufpl baplzl bobjnr b~vornr
      into corresponding fields of table t_longtext
      from afko
        as a
    left join afvc
        as b
        on aaufpl = baufpl
       for all entries in e_activity
       where a~aufnr = e_activity-network
       and a~aufnr is not null.
endif.
      txtname = wa_longtext-objnr.
      replace c_nv in txtname with sy-mandt.

Long text at inspection completion.

Similar Messages

Maybe you are looking for