Long text not displayed in outpur of adhoc query

Hi,
I am trying to run an ad hoc query in which i need the Org unit long text in the output.
When i run i only see the short text of the Org unit.I tried changing the output display option as 'Value and text' and 'text' both but it shows the short text only.
Could you please suggest what changes i need to make to the infoset to view the long text of the Org unit.
elp will be highly appreciated.
sushil

The help text does not say that this is the case for routings (and I dont know it either as I never loaded text for routings).
Of course you can read your text with the function module, as you enter the keys like you done it to load the text.
But this is not a proof at all.
In 90 % where the text does not appear it is just a matter of the used key. maybe forgot to have leading zeros in the name field.
Best you enter a text manually in a route, then you use SE16 with table STXH to find this record, and then you compare the key fields of this record with the key fields of a record you created with the upload.
if this is all okay, then it might have to do with a text indicator in the normal tables of the routing.

Similar Messages

Field Short Text and long Text not displayed in SKA1 in Se17

When try to extract chart of account data from SAP using Tcode se17 and table ska1. Short text and G/L acc long text are not displayed where as these are displayed when we use t code se16 and table ska1.
My client want to use specifically se17 for extracting the data.

Vineet,
that's a joke isnt' it ?
se17 is from SAP-Rel 2.1 or s.th.!
all jokes aside - the inclusion of text table (here table skat - to table ska1) is only realized with transcations SE16 and SE16N.
To program this inclusion to se17 is very costly - i think and a modification too!
hope you can persuade your client
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.businesscard.sdnbusinesscard?u=iwo3sshliihvcradiegqaw%3d%3d">andreas Mann</a>

Flash Text not displaying certain fonts

Thanks as always…
I am trying to use Flash text for some headings, but after an
hour of pulling my hair out I've just realised it will only display
certain fonts, such as Helvetica etc.
I added the font I want to use to my font list but it still
does not display…
I'm using MX on OSX 10.3.9.
Any ideas? Thansk.
Flash Text not displaying certain fonts

Fodderstompf wrote:
> Thanks guys,
>
> I don't have Flash MX and it turns out the font is a
Postscript Type 1.
>
> Didn't realise about the true-type thing, bit of
nusiance (and completely the
> opposite of the hassle I normally have with print
work!).
>
> I'm gonna look and see I can get a true-type version of
the font (Tabitha), or
> is there any other work around?
>
> Thanks.
>
>
Is your text in a dynamic text box, or static text box in
flash?
I don't think the issue concerns the "true-type" or not
"true-type" font.
In Flash, when text is part of a dynamic text box (which I
assume is the case in your situation),
then the font works just like in an html page:
if the font is installed on the computer it will show, if
not, it won't. The way around this, is to
embed the font data in the authoring flash file, and link it
to the dynamic text box, via actionScript.
So if you cannot work on the authoring Flash file with Flash
MX or Flash8, and if indeed we're
talking about a dynamic text box, your only option is to use
a web-safe font.
seb ( [email protected])
http://webtrans1.com | high-end web
design
An Ingenious WebSite Builder:
http://sitelander.com

Why won't voice generated text not display as I speak?

Why won't voice generated text not display on the screen as I speak?

All you get in 10.6.5 is spoken COMMAND recognition.
Dictation requires 10.8 Mountain Lion or later:
Mac Basics: Dictation lets you speak text instead of typing

Routing Long text not populated using LSMW

I need help with the ROUTING LONG TEXT using LSMW. I'm using the standard LSMW direct input program /SAPDMC/SAP_LSMW_IMP . I'm confused with NAME field while loading the data. I have tried to create the routing long text manually after successful creation i opened the Longtext at header screen and opened GOTO--> HEADER there i have seen TEXT NAME is constructed based on CLIENT || N || GROUP || GROUPCOUNTER || INTERNAL_COUNTER (CLIENT||N||PLNTY||PLNNR||PLNAL||ZAEHL - field names) I used the same logic to construct the test data for another routings which were created and doesn't have the long text. I have run the lsmw program and executed successfully but when i open the routing in CA03 i dont see the long text populated.
Test data used looks like this:
OBJECT NAME TDID SPRAS TEXTFORM TEXTLINE
ROUTING N500000890100000001 PLKO E * THIS IS A TEST1
ROUTING N500000890100000001 PLKO E * THIS IS A TEST2
ROUTING N500000890100000001 PLKO E * THIS IS LINE3
ROUTING N500000910100000001 PLKO E * LONGTEXT1
ROUTING N500000910100000001 PLKO E * LONGTEXT2
My question here is do i need to construct the NAME as i have mentioned above or do i need to just send the Routing Group number into the file for the NAME field. Help me understand what do i need to populate into NAME field.
Please help with the mistake i have done.
Pretty much appriectiated for your replies.

You asked the same question in two different forums multiple times:
Standard LSMW to load Routing Long text
Re: LSMW : Long text not visible after the import of data
Please use same one thread for one question.
I gave you most of the needed information assuming you know how to do LSMW in the first thread itself.
You need to have the following fields in your source structure in addition to other fields like long text
MANDT
PLNTY
PLNNR
PLNAL
ZAEHL
In the step Maintain Field Mapping and Conversion Rules assign the source field MANDT to the variable NAME and then again place the cursor on the variable NAME and assign variable PLNTY, (now you have two source field assigned to same variable) similarly assign all the remaining 3 source fields PLNNR, PLNAL, ZAEHL. (now you have 5 source field assigned to same variable).
Now select the variable NAME by placing the cursor click on Rule (Insert Rule) and select the radio button Concatenation .
Make sure that in your input file you have leading zeros for PLNNR PLNAL and ZAEHL etc. like below
50000089, 01, 00000001
Also, you don't need maintain the value of OBJECT, TDID, SPRAS, TEXTFORM as source fields. You can directly maintain them as constants in Maintain Field Mapping and Conversion Rules by click on the push button Rule .

PO Material text not displayed in PO

Hi All,
Please help me in finding a solution for my issue,
We use SAP ERP 6.0, and recently upgraded from SRM 4.0 to SRM 7.0. whenever a PO is processed in SRM and replicated to SAP, "Item text" inputs entered in SRM is replicated to "Material PO Text" in SAP and when the PO is printed, those inputs are not displayed in the PO..
However if I amend the same PO again in SRM (by just modifying the inputs in "Item text") and re-replicate to SAP and reprint the PO, the inputs are displayed in PO this time. becoz of this, we had to amend every PO again to have the Item text displayed in PO.
Why the inputs are not displayed in PO at the first time and what made the system to display it after i amend the PO the second time???
Any help is much appreciated.
Thanks
Vinoth

Nabheet, Thanks for your response.
I have already raised this with the tech team and they said they antcipate this to be fixed by this March. I have no idea if this takes so long to fix it. Since we had to process 100s of POs every day, it is affecting our SLA badly
Vinoth

Text Area for long text not appearing properly for BBP_POC_DISPLAY Service

Hi,
In our development we have added additional Icon at ITS in Process PO transaction and onclicking that icon Web dynpro AB screen called with the Purchase Order No of selected row .(SRM 5.0)
There is one more icon in Web dynpro screen on click of that Purchase order service open in ITS with display mode .This is achieved with service BBP_POC_DISPLAY from Web Dynpro-AB.
This is also working ok only the issue is in Document tab of PO The Text Area for long text appear at Top .This functionality is working fine with BBP_POC service from ITS .
Has anybody faced this kind of issue ?
Thanks,
SMS

Hi SMS,
I am unsure of the additional component you are talking about. In general, issues with text area misplacing, is solved by note 1067625. May be you can check it.
thanks,
Ashwin

Long Text Editor displaying & incorrectly.

Hi Experts,
                Currently I am facing an issue that the & sign is not being displayed correctly in the Long text editor. It is shown as '<(>&<)>' in some places and '&' in others. I understand that the <(> symbol is used as protection for special symbols like &, however this is occuring in some places and not in others. Is there any package which fixes this problem??
                  Please help.
Thanks,
Aditya.

Hi Naimesh,
                   My problem is not with the display of variables in the editor. Consider the case wherein transactional data is displayed in Long text. For example if you go to IW22 and decide to change the text for the notification description. In case you give a & sign in the long text - it will be converted to - '<(>&<)>' , when I log on to see the changes I made the next time. However I want the editor to stop this conversion. Please reply.
Thanks ,
             Aditya.

InfoObject Text not displaying in BPS Web

Hi Gurus,
We are using a custom InfoObject attribute only characteristics (Only text table). We are using this object in BPS planning. When we launch the BPS_Web and drilldown on this Object, it just shows us the technical value, not the text. We would like the drilldown to show only text. I tried to change the Business Explorer properties for display 'Text'. However it is not helping us.
Please let me know if you have encountered any issues?
Thanks!

Check to see if the table- RSDCHABAS has the entries for the custom infoobject
Short text exists = X
Med-length exists = X
Long text exists = X
populated..
In reply to my previous posts are the std.business content iobjects able to display TEXTS needed??
Hope it helps
Chetan
@CP..

Full Text not Displaying in table

Hi Experts
I am displaying Long text in Text elements in table But It is not displaying full Text only Half of text is displaying.
How to overcome this? Is there any length limitation for text elements in table.
and Variable type is STRING
i am concatenating lines from Read text FM.
Regards
Jagadish
Edited by: acj_vy on Aug 17, 2010 10:23 AM

Hi,
You should not concatenate the text into string which you read using READ_TEXT.
You should loop at the table and then display the text using work area of the table.
It will be displayed line by line as it is getting displayed in your standard transaction.
Thanks,
Archana

GL Account Text not displayed in Login Language

Hi All
We are having EN and NL as the login languages in our SAP ECC 6.0.
We create GL account in login language EN and maintain the English version description for Short and Long text in "key word/translation" tab and maintain NL short and Long text in the first tab "type/description" under the field group "descrition in Maintenance Language (NL)" and the same is updated against DL language in tab "word/translation".
My query is that since we are maintaining the short and long term description in both the login languages, why the system shows only the descrition maintained in DL in the short and long text under description field group( descrition in Maintenance Language (NL)" ) when the login language is in EN.
I would like to know how to get the short and long term descrition of the GL account to be shown according to the login language.
Requesting your inputs at the earliest please.
Regards
Kamlesh

Hi
To clarify my doubt, We are having DL and EN language in our system and Chart of Account maintenance language is DL. Because of this , GL account short and long text are maintained only in DL. We have maintained translation in English for each GL account. However when we logon with EN, system does not show the short and long text in EN instead it is shown in DL only.
I would like to know is there any possibility to display the GL account short and long text description in English if the logon language is EN.
Thanks in advance for your inputs.
Regards
Kamlesh

After creation producton order long text not visible inCO03

Hi
while creating production order with co01 i entered long text in longtext tab of the production order
after that in display mode co03 that long text is not visilbe. tell me why and what are the setting required.
thanks
RAVI

when i am creating production order
i enter materil, plant, order type
after that in producto header screen
i enter total quantiy 1 and scheduling type current date in genaral tab
after that i go to long text tab i enterd long text and i saved the order
then i check in co03 the long text in entered not visible.
i am in single tc code that time co01
thanks
ravi

Custom Messages Long Text not appearing

Hi Everybody!
We are having a problem displaying the long text of custom messages.
After we click on the "More Information" link beside the message short text, we should get a pop-up message with the long text.
Instead, we get a pop-up message showing an internet explorer 400 error.
We are OK displaying long text of standard messages. Should we do something extra to display long text of custom messages?
Thanks
Gabriel

Hi Atul,
Regarding the long-text option, yes, I have marked: The "Self-Explanatory" checkbox is not checked.
Here is the source code!
** VARIABLES **
DATA: t_partner          TYPE TABLE OF bbp_pds_partner,
        x_partner          TYPE bbp_pds_partner,
        u_vendor_set       TYPE TABLE OF bbp_vendor_getlist_s,
        x_vendor_set       TYPE bbp_vendor_getlist_s,
        w_xfeld            TYPE xfeld,
        e_message          TYPE bbp_smessages_badi,
        w_guid_crmt_object TYPE crmt_object_guid,
        w_guid_bbp_guid    TYPE bbp_guid,
        w_partner_no       TYPE bu_partner_guid,
        w_nombre           TYPE bdl_logfun,
        w_process          TYPE bbp_proc_type,
        w_status           TYPE xfeld,
        w_header           TYPE bbp_pds_po_header_d.
    CALL FUNCTION 'BBP_PD_PO_GETDETAIL'
      EXPORTING
        i_guid          = iv_doc_guid
        i_with_itemdata = 'X'
      IMPORTING
        e_header        = w_header
      TABLES
        e_partner       = t_partner.
    IF iv_cv_updated_active_doc = space.
      w_guid_bbp_guid   = iv_doc_guid.
      w_guid_crmt_object = w_guid_bbp_guid .
      LOOP AT t_partner INTO x_partner WHERE partner_fct = '00000019'.
        w_partner_no = x_partner-partner_no.
*     This function check if the partner is valid.
        CALL FUNCTION 'Z_BC_BLOQ_GET'
          EXPORTING
            iv_bu_partner_guid = w_partner_no
          IMPORTING
            ev_xfeld           = w_xfeld.
        IF w_xfeld IS NOT INITIAL.
* Get the name of the vendor.
          CALL FUNCTION 'BBP_VENDOR_GETINFO'
            EXPORTING
              partner_guid       = w_partner_no
              x_with_name        = 'X'
              x_show_inv_parties = 'X'
              purch_pd_org_type = 'O'
            TABLES
              vendor_set         = u_vendor_set.
          READ TABLE u_vendor_set INTO x_vendor_set INDEX 1.
          CLEAR e_message.
          e_message-msgty   = 'A'.
          e_message-msgid   = 'ZSRM_ERRORES'.
          e_message-msgno   = '005'.
          e_message-msgv1   = x_vendor_set-partner.
          e_message-msgv2   = x_vendor_set-vendor_name.
          e_message-msgv3   = x_vendor_set-vendor_no.
          APPEND e_message TO et_messages.
        ENDIF.
        CLEAR x_partner.
      ENDLOOP.
ENDIF.
ENDMETHOD.

Text not displaying

I have been slowly converting an AS3 Flash IDE-based interface to Flash Builder, keeping up with the daily builds (for the most part) and reporting bugs as I go.
For a long while, things were going great, aside from the several bugs that I reported. At some point along the way, though, the text in my entire project started not displaying properly. Certain characters do not display at all.
It is a Windows standard font, though newer (Calibri), and the entire font set is currently embedded in the project.
For some reason, most capital letters do not display, nor do certain special characters (underscore, etc) Some lowercase letters don't display.
It is always the same letters that don't display.
I thought this was an issue with the build, but I rolled the SDK back the whole way to 4.0 (the original beta build) and it is happening there as well. There is no rhyme or reason to it, as far as I can tell.
Here is a screenshot with the problem:
The tabs should read:
Menu
Important Points
Glossary
The menu list should read:
Pre-Test Pt 1
4800_020
Fred Bauer Audio
Learning Activity
Learning Activity
Fred Bauer Audio
4800_020
Learning Activity
Learning Activity
And the horizontal list at the bottom should read:
Page 1
2
3
4
5
6
7
8
9
Has anyone else encountered this type of problem? Any workarounds?

Rich,
+1 to Alex's simple test case suggestion.
For example, does this work for you?
It renders correctly on for me using XP/FP 10.0.22.87 (debug) with SDK 4.0.0.8847:
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
        xmlns:s="library://ns.adobe.com/flex/spark"
        xmlns:mx="library://ns.adobe.com/flex/halo">
<s:layout>
        <s:HorizontalLayout gap="20" paddingLeft="20" paddingTop="20" />
    </s:layout>
    <fx:Script>
        <![CDATA[
            [Embed(source='C:/WINDOWS/FONTS/CALIBRI.TTF',
                   fontFamily='CalibriE',
                   mimeType="application/x-font",
                   embedAsCFF="true")]
            public static var CalibriEmbedded:Class;
        ]]>
    </fx:Script>
    <fx:Style>
        @namespace s "library://ns.adobe.com/flex/spark";
        @namespace mx "library://ns.adobe.com/flex/halo";
        s|SimpleText,
        s|RichText,
        s|RichEditableText {
            fontFamily: "CalibriE";
    </fx:Style>
    <s:VGroup>
        <s:SimpleText text="SimpleText test:" fontSize="16" />
        <s:SimpleText text="Menu" />
        <s:SimpleText text="Important Points" />
        <s:SimpleText text="Glossary" />
        <mx:HRule width="100%" />
        <s:SimpleText text="Pre-Test Pt 1" />
        <s:SimpleText text="4800_020" />
        <s:SimpleText text="Fred Bauer Audio" />
        <s:SimpleText text="Learning Activity" />
        <s:SimpleText text="Learning Activity" />
        <s:SimpleText text="Fred Bauer Audio" />
        <s:SimpleText text="4800_020" />
        <s:SimpleText text="Learning Activity" />
        <s:SimpleText text="Learning Activity" />
        <s:SimpleText text="Page 1" />
    </s:VGroup>
    <s:VGroup>
        <s:RichText text="RichText test:" fontSize="16" />
        <s:RichText text="Menu" />
        <s:RichText text="Important Points" />
        <s:RichText text="Glossary" />
        <mx:HRule width="100%" />
        <s:RichText text="Pre-Test Pt 1" />
        <s:RichText text="4800_020" />
        <s:RichText text="Fred Bauer Audio" />
        <s:RichText text="Learning Activity" />
        <s:RichText text="Learning Activity" />
        <s:RichText text="Fred Bauer Audio" />
        <s:RichText text="4800_020" />
        <s:RichText text="Learning Activity" />
        <s:RichText text="Learning Activity" />
        <s:RichText text="Page 1" />
    </s:VGroup>
    <s:VGroup>
        <s:RichEditableText text="RichEditableText test:" fontSize="16" />
        <s:RichEditableText text="Menu" />
        <s:RichEditableText text="Important Points" />
        <s:RichEditableText text="Glossary" />
        <mx:HRule width="100%" />
        <s:RichEditableText text="Pre-Test Pt 1" />
        <s:RichEditableText text="4800_020" />
        <s:RichEditableText text="Fred Bauer Audio" />
        <s:RichEditableText text="Learning Activity" />
        <s:RichEditableText text="Learning Activity" />
        <s:RichEditableText text="Fred Bauer Audio" />
        <s:RichEditableText text="4800_020" />
        <s:RichEditableText text="Learning Activity" />
        <s:RichEditableText text="Learning Activity" />
        <s:RichEditableText text="Page 1" />
    </s:VGroup>
    <s:SimpleText activate="event.currentTarget.text = mx_internal::VERSION;" />
</s:Application>
Peter

Text not displayed in the Web Report

Hi All,
I have a query where user is expecting both Key and Text to displayed in the report for the Info object "Local Product High". This infoobject has text data available. But Iam not sure why this is not getting displayed even when I select both Key and Text in the properties screen.Only Key is getting displayed.
Can some one throw some light on this.
Regards,
Srinivas

I juct checked the Text table and I see the texts for the infoobject exists. I do not think CHange run will resolve this issue. but yes the master data is active .
I will now try to run the report through Bex and come back.
Thanks for the input..
regards,
Srinivas

Long text not displayed in outpur of adhoc query

Similar Messages

Maybe you are looking for