Long time for export panel to appear

hi hop you can help me!
I have 1.5 aperture and the last few times ive used it it has taken over a minute or more for the export panel to appear when exporting a version.
I have also downloaded and tried the aperture 2 trial and the same thing is happening
Any ideas appreciated
toby

hi sorry to bump this up but appears to be the most comprehensive forum i could find and i'm struggling for an answer!
Would having watermarks on the presets and would the size of a watermark file influence the delay on the appearance of the export panel
Many thanks and sorry once again for the bump
tobes

Similar Messages

Non-self-contained movie huge & takes a very very long time to export

This is for FCE 4.
I have a 1.5 hour movie, and when I export it to quicktime (Not quicktime conversion) it takes WAY too long.
I have "make self-contained movie" unchecked, so I thought creating a reference movie would be very quick. Why is it taking so long and why is the resulting file huge?
My source files is DV, and only minor editing and effects were used. However the entire movie was cropped & resized. Is that why?

Ah I think I figured it out.
I did another test project with the same source DV file, but didn't do ANY editing to it.
It took 2 minutes to export a 70mb reference mov file from a 7 minute DV sequence.
Then I cropped & resized the sequence by changing parameters in the "motion" tab.
Then it took 20 minutes to export a much larger reference mov file from the same 7 minute DV sequence.
Then I clicked "render all" after selecting every render option in the drop-down menu.
Then it took less than 1 minute to export a 70mb reference mov file from the same 7 minute DV sequence.
So I guess I was having problems because I didn't render "everything", because I didn't select "FULL" on the drop-down menu for rendering. I thought only RED segments in the timeline needs to be rendered prior to export, but apparently the "FULL" render must be selected as well so that the entire timeline is nice and purple. (or some shade of blue)
Also, a cropped and resized video is very large in size (GB) if it is exported as a reference file only without prior rendering. * Can someone else confirm that this is the normal behavior in FCE? *
Oh well, lesson learned.. This movie is going to take a very long time to export, and result in a very large file. But I can't use it without cropping & resizing it!
Message was edited by: Yongwon Lee

Imovie takes a long time to export

I Edited in iMovie a two-hour movie, I added music and transitions. And now takes three hours to export and said that will export the full movie after 94 hours.Is a long time.
How can I try trahat it takes fewer time to export. For example 4 hours

Hi again Tirney,
That does sound like a long time for a 2 hour movie. Did you export using File>Finalize Project? If so, that may take quite a while to complete. That's because Finalize Project actually exports at all the different sizes, such as Mobile, Medium, Large, HD 720p and HD 1080p depending on the original source. It's best to decide what size you want, then choose (from iMovie's Menu) the option Share>Media Browser.
If producing a DVD, you can access the movie from iDVD's Media/Movies pane. Just drag the movie into a Theme background.
Otherwise, you can access the movie from the project's package contents folder. In Finder multi-column view, click on your User (Home) folder Movies, then iMovie Projects. Right-click (or Control-click) on the name of your project and select Show Package Contents. In the Movies folder you will see your exported movie (or movies). They will be either .m4v or .mov files, but both will be in H.264 format. If you wish to use them elsewhere, copy then paste them to your Desktop (or preferred location) - don't move anything from the package contents folder!
John

Impdp taking long time for only few MBs data...

Hi All,
I have one query related to impdp. I have one expdp file and size is 47M. When I restore this dmp using impdp it will take more time. Also initially table_data loaded finsih very fast but then later on alter function/procedure/view taking a lot time almost 4 to 5 hrs.
I have no idea why its taking long time... Earlier I can see one DB link is failed and it given error for "TNS name could not resolved" so I create DB link also before run impdp but the same result. Can any one suggest what could be the cause to taking long time for only 47MB data?
Note - Both expdp and impdp database version is 11.2.0.3.0. If I import the same dmp file into 11.2.0.1.0 then its done in few mins.
Thanks...

Also Read
Checklist For Slow Performance Of DataPump Export (expdp) And Import (impdp) [ID 453895.1]
DataPump Import (IMPDP) is Very Slow at Object/System/Role Grants, Default Roles [ID 1267951.1]

Spool printing takes a long time for just one user

Hello,
Could someone please guide on what could be the reason that spool printing takes a long time for just one user ?
I've monitored all the spool processes through SM50, and I've found that a very long time elapses before the printing job appears in one of the four spool processes.
Thanks in advance.
Reda

Hi,
very long time elapses before the printing job appears in one of the four spool processes.
can u check the trace file(Red color error) of that spool process. Also can u see if there are any system logs in SM21 related to that spool request.
Also see how many pages the user is giving print @ 1 shot. Suppose if the printer to whcih the user is giving print is a network printer, see the network response time.
Have u tried to ask the same user to give print to some other printer. Also have u asked some other user to print to that problematic printer. Check the responses under this scenario also.
Regards,
Ravi

Long delay for login list to appear Mavericks Server

I am currently looking at an issue where the login list of users takes up to 30 seconds to appear after a user has logged out of their account. This might not sound like much time, but is a long time for the user waiting to get the list. Any ideas on where to look for a remedy, or what tests might be applied would be appreciated.
Clients are all 2012 - 2013 iMacs and Macbook Airs - About 140 nodes
Server is a new Mid 2012 Mac Pro Server running Mavericks server with all updates. Open Directory network.
Network is Gigabit with a 3com 4500 Layer 3 switch and Gig Lan switches.
Message was edited by: Don Roedl - To edit out my personal machine, which is not relevant to the issue.

Hello Don
We have experienced the same issue.
Are all clients 10.9 clients or 10.8 ?
If 10.8 home directories should be served as AFP protocol. If 10.9 clients then it is SMB ( SMB 2 ) OS X 10.10 Yosemite has moved from SMB2 to SMB3.
Make sure in clients that you have "Show fast user switching" ticked off.
Otherwise, the user logs out but the client machine will almost never unmount the previous user home directory shared point, the next user will not be able to log in.
In Server.app under File Sharing you see idle users even after successful log out. It was our case.
Some people on the internet went to the terminal to add precious terminal commands to force kill idle users after a "x" hours for instance.
http://krypted.com/mac-security/missing-server-app-settings-for-afp/
10.8 and 10.9 have differences.
I suggest you read http://www.amazon.com/Apple-Pro-Training-Essentials-Supporting-ebook/dp/B00HJUBR Q0
Even if you have lots of experience with OS X.

Longer time for Material Availability check while creation of prd order.

Hi guys,
I am facing a weird problem while creating production orders thru CO01.
I enter the component and plant and I am also using the forward scheduling option.
for some reason, SAP is taking a long time for material availability check when I hit the release button.
Sometimes its taking more than an hour. Its happening with few specific BOM's, and I have checked the master data but I could hardly find a problem in master data.
Can someone suggest me some tips ??
Thanks & Regards,
Sashivardhan

Hi,
Please check the Availability check control maintained for Components it should be 01 or 02. Also check the issue storage location maintained or not. You can maintain issue storage location in BOM in Status/lng text tab in Production Storage Location.
Hope this will help.
Regards,
Navin

Taking too long time for booting

Hi there,
I just bought myself an iphone 5s. . Try to get up started for the 1st time but the thing keep booting or loading too long time for endless hours. What may go wrong? Appreciate if you could help me on this.

But payment run before due date. you are not run before due date once check it

Takes a long time for Apple logo to show up on boot up

My 13" mpb early 2011 takes a long time for the Apple logo to show up... Is there a way to fix this? (It should show up within 2 seconds after the initial chime)
I have Win7 installed, could it be that? Since it might be detecting which partition to boot up with.

Check login items ...
Remove all items from System Preferences > Users & Groups > Login Items
Same for HD > Library > StartupItems
Then restart your Mac to test.
Not necessarily a Windows issue.
*** When you post for help, please state which OS X is installed.
If you aren't sure, click About this Mac from your Apple menu 
Troubleshooting advice can depend on that information.

Query taking long time for EXTRACTING the data more than 24 hours

Hi ,
Query taking long time for EXTRACTING the data more than 24 hours please find the query and explain plan details below even indexes avilable on table's goe's to FULL TABLE SCAN. please suggest me.......
SQL> explain plan for select a.account_id,round(a.account_balance,2) account_balance,
2 nvl(ah.invoice_id,ah.adjustment_id) transaction_id,
to_char(ah.effective_start_date,'DD-MON-YYYY') transaction_date,
to_char(nvl(i.payment_due_date,
to_date('30-12-9999','dd-mm-yyyy')),'DD-MON-YYYY')
due_date, ah.current_balance-ah.previous_balance amount,
decode(ah.invoice_id,null,'A','I') transaction_type
3 4 5 6 7 8 from account a,account_history ah,invoice i_+
where a.account_id=ah.account_id
and a.account_type_id=1000002
and round(a.account_balance,2) > 0
and (ah.invoice_id is not null or ah.adjustment_id is not null)
and ah.CURRENT_BALANCE > ah.previous_balance
and ah.invoice_id=i.invoice_id(+)
AND a.account_balance > 0
order by a.account_id,ah.effective_start_date desc; 9 10 11 12 13 14 15 16
Explained.
SQL> select * from table(dbms_xplan.display);
PLAN_TABLE_OUTPUT
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)|
| 0 | SELECT STATEMENT | | 544K| 30M| | 693K (20)|
| 1 | SORT ORDER BY | | 544K| 30M| 75M| 693K (20)|
|* 2 | HASH JOIN | | 544K| 30M| | 689K (20)|
|* 3 | TABLE ACCESS FULL | ACCOUNT | 20080 | 294K| | 6220 (18)|
|* 4 | HASH JOIN OUTER | | 131M| 5532M| 5155M| 678K (20)|
|* 5 | TABLE ACCESS FULL| ACCOUNT_HISTORY | 131M| 3646M| | 197K (25)|
| 6 | TABLE ACCESS FULL| INVOICE | 262M| 3758M| | 306K (18)|
Predicate Information (identified by operation id):
2 - access("A"."ACCOUNT_ID"="AH"."ACCOUNT_ID")
3 - filter("A"."ACCOUNT_TYPE_ID"=1000002 AND "A"."ACCOUNT_BALANCE">0 AND
ROUND("A"."ACCOUNT_BALANCE",2)>0)
4 - access("AH"."INVOICE_ID"="I"."INVOICE_ID"(+))
5 - filter("AH"."CURRENT_BALANCE">"AH"."PREVIOUS_BALANCE" AND ("AH"."INVOICE_ID"
IS NOT NULL OR "AH"."ADJUSTMENT_ID" IS NOT NULL))
22 rows selected.
Index Details:+_
SQL> select INDEX_OWNER,INDEX_NAME,COLUMN_NAME,TABLE_NAME from dba_ind_columns where
2 table_name in ('INVOICE','ACCOUNT','ACCOUNT_HISTORY') order by 4;
INDEX_OWNER INDEX_NAME COLUMN_NAME TABLE_NAME
OPS$SVM_SRV4 P_ACCOUNT ACCOUNT_ID ACCOUNT
OPS$SVM_SRV4 U_ACCOUNT_NAME ACCOUNT_NAME ACCOUNT
OPS$SVM_SRV4 U_ACCOUNT CUSTOMER_NODE_ID ACCOUNT
OPS$SVM_SRV4 U_ACCOUNT ACCOUNT_TYPE_ID ACCOUNT
OPS$SVM_SRV4 I_ACCOUNT_ACCOUNT_TYPE ACCOUNT_TYPE_ID ACCOUNT
OPS$SVM_SRV4 I_ACCOUNT_INVOICE INVOICE_ID ACCOUNT
OPS$SVM_SRV4 I_ACCOUNT_PREVIOUS_INVOICE PREVIOUS_INVOICE_ID ACCOUNT
OPS$SVM_SRV4 U_ACCOUNT_NAME_ID ACCOUNT_NAME ACCOUNT
OPS$SVM_SRV4 U_ACCOUNT_NAME_ID ACCOUNT_ID ACCOUNT
OPS$SVM_SRV4 I_LAST_MODIFIED_ACCOUNT LAST_MODIFIED ACCOUNT
OPS$SVM_SRV4 I_ACCOUNT_INVOICE_ACCOUNT INVOICE_ACCOUNT_ID ACCOUNT
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_ACCOUNT ACCOUNT_ID ACCOUNT_HISTORY
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_ACCOUNT SEQNR ACCOUNT_HISTORY
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_INVOICE INVOICE_ID ACCOUNT_HISTORY
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_ADINV INVOICE_ID ACCOUNT_HISTORY
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_CIA CURRENT_BALANCE ACCOUNT_HISTORY
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_CIA INVOICE_ID ACCOUNT_HISTORY
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_CIA ADJUSTMENT_ID ACCOUNT_HISTORY
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_CIA ACCOUNT_ID ACCOUNT_HISTORY
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_LMOD LAST_MODIFIED ACCOUNT_HISTORY
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_ADINV ADJUSTMENT_ID ACCOUNT_HISTORY
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_PAYMENT PAYMENT_ID ACCOUNT_HISTORY
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_ADJUSTMENT ADJUSTMENT_ID ACCOUNT_HISTORY
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_APPLIED_DT APPLIED_DATE ACCOUNT_HISTORY
OPS$SVM_SRV4 P_INVOICE INVOICE_ID INVOICE
OPS$SVM_SRV4 U_INVOICE CUSTOMER_INVOICE_STR INVOICE
OPS$SVM_SRV4 I_LAST_MODIFIED_INVOICE LAST_MODIFIED INVOICE
OPS$SVM_SRV4 U_INVOICE_ACCOUNT ACCOUNT_ID INVOICE
OPS$SVM_SRV4 U_INVOICE_ACCOUNT BILL_RUN_ID INVOICE
OPS$SVM_SRV4 I_INVOICE_BILL_RUN BILL_RUN_ID INVOICE
OPS$SVM_SRV4 I_INVOICE_INVOICE_TYPE INVOICE_TYPE_ID INVOICE
OPS$SVM_SRV4 I_INVOICE_CUSTOMER_NODE CUSTOMER_NODE_ID INVOICE
32 rows selected.
Regards,
Bathula
Oracle-DBA

I have some suggestions. But first, you realize that you have some redundant indexes, right? You have an index on account(account_name) and also account(account_name, account_id), and also account_history(invoice_id) and account_history(invoice_id, adjustment_id). No matter, I will suggest some new composite indexes.
Also, you do not need two lines for these conditions:
and round(a.account_balance, 2) > 0
AND a.account_balance > 0
You can just use: and a.account_balance >= 0.005
So the formatted query isselect a.account_id,
       round(a.account_balance, 2) account_balance,
       nvl(ah.invoice_id, ah.adjustment_id) transaction_id,
       to_char(ah.effective_start_date, 'DD-MON-YYYY') transaction_date,
       to_char(nvl(i.payment_due_date, to_date('30-12-9999', 'dd-mm-yyyy')),
               'DD-MON-YYYY') due_date,
       ah.current_balance - ah.previous_balance amount,
       decode(ah.invoice_id, null, 'A', 'I') transaction_type
from account a, account_history ah, invoice i
where a.account_id = ah.account_id
   and a.account_type_id = 1000002
   and (ah.invoice_id is not null or ah.adjustment_id is not null)
   and ah.CURRENT_BALANCE > ah.previous_balance
   and ah.invoice_id = i.invoice_id(+)
   AND a.account_balance >= .005
order by a.account_id, ah.effective_start_date desc;You will probably want to select:
1. From ACCOUNT first (your smaller table), for which you supply a literal on account_type_id. That should limit the accounts retrieved from ACCOUNT_HISTORY
2. From ACCOUNT_HISTORY. We want to limit the records as much as possible on this table because of the outer join.
3. INVOICE we want to access last because it seems to be least restricted, it is the biggest, and it has the outer join condition so it will manufacture rows to match as many rows as come back from account_history.
Try the query above after creating the following composite indexes. The order of the columns is important:create index account_composite_i on account(account_type_id, account_balance, account_id);
create index acct_history_comp_i on account_history(account_id, invoice_id, adjustment_id, current_balance, previous_balance, effective_start_date);
create index invoice_composite_i on invoice(invoice_id, payment_due_date);All the columns used in the where clause will be indexed, in a logical order suited to the needs of the query. Plus each selected column is indexed as well so that we should not need to touch the tables at all to satisfy the query.
Try the query after creating these indexes.
A final suggestion is to try larger sort and hash area sizes and a manual workarea policy.alter session set workarea_size_policy = manual;
alter session set sort_area_size = 2147483647;
alter session set hash_area_size = 2147483647;

My folders take forever to open and then the docs within take a long time for the icon to pop up. the same thing with moving itmes from the desktop to a folder, and also emptying the trashh

my folders take forever to open and then the docs within take a long time for the icon to pop up. the same thing with moving itmes from the desktop to a folder, and also emptying the trashh

Don't know if that would be a failing hard drive, but it may be that you are out of available space. How much hard drive space do you have available? Please highlight the Macintosh HD icon and then press Command and I for a get info window. Once open, please copy and post the following:
Capacity:
Used:
Available:
Mac OS requires a minimum of 10 - 15% of total hard drive space available and empty at all times in order to operate properly.

My lap top is extremly slow. It studders. It kind of sounds like there is a fan inside and it constantly stopping and starting. And, it takes a really long time for it too start up. Whats wrong with it?

My lap top is extremly slow. It studders. It kind of sounds like there is a fan inside and it constantly stopping and starting. And, it takes a really long time for it too start up. Whats wrong with it?

Do you have current backups?
Those symptoms could indicate a failing Hard drive. If it dies, all your documents go with it unless you have Backups.
I have had very good luck with physical and battery problem diagnosis at the Genius Bar. Those guys put their hands (and their ears) to these machines, all day every day, and they know immediately what all those sounds mean.
Your appointment for an evaluation is FREE, in warranty or out.

Takes long time for shutdown after adding to domain

Hi,
Workstation OS - Window 7
Domain Controller OS - Window server 2008 R2 standard
Following thing i have measure with Stopwatch.
1) When the laptop is in workgroup, it takes just 17 second for shutdown.
2) when i added the same laptop in domain ( corp.abc.com ), now it takes 1minutes and 22 second for shutdown. ( it just show shutting down screen )
Why the shutdown time increased so much?
Do you have any idea?
Note:- i have not make any changes in laptop, nor added any software. I have done the above testing because user start complaining that after putting laptop in domain it takes long time for shutdown. It's happening to all laptop where the OS is window 7
There is no logoff scripts / gpo's as well as we don't have roaming profiles.
Please advice.
Thanks & Regards,
Param
www.paramgupta.blogspot.com

Hi,
To troubleshooting this issue, please install Windows Performance Tools (WPT) Kit. The Windows Performance Tools (WPT) Kit contains performance analysis tools, and is designed for analysis of a wide range of performance problems including application start
times, boot issues, deferred procedure calls and interrupt activity (DPCs and ISRs), system responsiveness issues, application resource usage, and interrupt storms.
To get the installer, you have to install the Windows 7 SDK.
Microsoft Windows SDK for Windows 7 and .NET Framework 3.5 SP1
http://www.microsoft.com/en-us/download/details.aspx?id=3138
For shutdown tracing:
Run command:
xbootmgr -trace shutdown -noPrepReboot -traceFlags BASE+CSWITCH+DRIVERS+POWER -resultPath C:\TEMP
Collect logs and post them for further troubleshooting.
For more information please refer to following MS articles:
Long Shutdown Time on Windows 7 Ultimate x64
http://social.technet.microsoft.com/Forums/en/w7itproperf/thread/11a42a93-efd2-4184-9ce8-bbc1438b7ea6
Long shutdown time on Windows 7 64 bit laptop
http://social.technet.microsoft.com/Forums/en-US/w7itproperf/thread/4440fc6e-c81e-440c-9183-9b7e176729d2
Lawrence
TechNet Community Support

HT4759 Hello .. I've been subscribed for ic;oud for 20$ per year and I found it useless for many reasons: that I can not disconnect my mobile while the uploading process and it takes long time for uploading my data .. Its not a reliable system that's why

Hello .. I've been subscribed for ic;oud for 20$ per year and I found it useless for many reasons: that I can not disconnect my mobile while the uploading process and it takes long time for uploading my data .. Its not a reliable system that's why I need to deactivate the space service and take my money back .. Thanks

The "issues" you've raised are nothing to do with the iCloud service.
No service that uploads data allows you to disconnect the device you are uploading from while uploading data. Doing so would prevent the upload from completing. It is a basic requirement for any uploading service that you remain connected to it for uploading to be possible.
The time it takes to upload data to iCloud is entirely dependent on how fast your Internet connection is, and how much data you are uploading. Both of these things are completely out of Apple's control. Whichever upload service you use will be affected by the speed of your Internet connection.

Bex Reports takes long time for filtering

Hi,
We have gone live in last December.And already our inventory cube contains some 15 million records,sales cube contains 12 million records.
Is there any specific limit to number of records.Because while doing filtering in inventory report or sales reports it is taking very long time.
Is there any alternative or we should delete some the data from the cube.
for filtering any value it is taking long time than running the query itself.
Pls help...
Regards,
viren.

Hi Viren,
I hope a cube can perform well even at 100 million records with some performance tunning. So i absolutely doubt why it is taking long time for your cube with just 10-15 million records.
Do a performance analysis and check whether aggregates will be helpful or not.
Check the below link for how to do a performance analysis.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/d9fd84ad-0701-0010-d9a5-ba726caa585d
Hope it helps.
Thx,
Soumya

Long time for export panel to appear

Similar Messages

Maybe you are looking for