Long timeout before getting new DHCP lease when changing VLAN - 5508

We have a HA with 5508:s, we are on 7.6.110.0.
Since going HA we have seen a new problem with our main WLAN, clients connect to a login net on a login VLAN, after authenticating they get shuttled to another VLAN.
After getting initial IP-address and authenticating it takes several minutes for the clients to get a new DHCP address on the new VLAN.
Our web-auth WLAN on the other hand stays on the same VLAN and we see no trouble there.
I'm thinking this could be CSCuj45983 which has been resolved in the 7.4-series firmware but not yet in the 7.6-series but I'm not sure.
Any thoughts? Logs attached.

This is normal behavior. When a client first associate to an AP then client will get an IP from the interface map to that SSID. You will see "Association Request" in the debug output coming from client if they are connecting to the network first time (if it is a roam you will see a Reassociation Request)
Then if that client roam to different AP (map to different interface/subnet), client will not change its IP, but keep the original IP. In debug you will see "Re-association Request" in this scenario as shown below.
apfMsConnTask_2: Jan 15 10:18:17.703: e4:ce:8f:15:30:3c Reassociation received from mobile on BSSID b8:be:bf:b7:ec:ec
HTH
Rasika
**** Pls rate all useful responses ****

Similar Messages

I made a video series on one time line and now want to copy paste sections into other tiemlines so I can separate the series into distinct videos to upload. How do I get new timelines? When I go to new event it asks for import footage.

I made a video series on one time line and now want to copy paste sections into other tiemlines so I can separate the series into distinct videos to upload. How do I get new timelines? When I go to new event it asks for import footage.

You seem to be new to this software, so I highly recommend that you take some time to learn it using some great tutorials available online - it will pay off to invest the time, if you follow through, for example the great (and free) introductory tutorial at izzyvideo.com.
This is an amazing piece of software, and you'll have a lot to learn, but it's well worth it.

When i try to sync my phone, it says i should get ios5.1 but will lose my data except basic settings. How do i back it all up before getting new software if it wont let me sync? I am worried about the photos.

I have been trying to sync my phone, but it says i need to get the new software ios 5.1, but in doing this I will lose some things purchased on my phone which arent on itunes, and I should transfer them It also says something about apps and that i will only be able to store basic settings like contacts and texts. How can i back my phone up before installing this software update, and what do i do about my photos?
Thanks

Read the User's Guide... it covers how to backup and sync the device as designed.

10.4.8 Client takes long time to get to login window when bound to OD.

I am working on a system in a school. We have a dual processor g5 xserve with 4 gb of ram, the raid card, and 3 500 gb drives.
Fresh install of 10.4.8 with all the updates.
Raid 5 split in 2 volumes, one for server and one for data.
AFP service running.
Local dns running.
Promoted to open directory master.
This is the following test scenario i have.
there is a user called studenttest and he belongs to a group called cccarstarmembers and is in a workgroup called student.
the studenttest users home folder exists in a sharepoint called students that is set up on the data partition.
there is a sharepoint called cccarstar that holds data for some educational software we use. The owner is administrator with rw access, the group is cccarstarmembers with rw access and others have no access.
The student workgroup only has a few changes like dock location just for testing purposes to verify that the work group is working properly.
When i bind a newly built 10.4.8 client with all the updates to the od server it intermittantly takes a long time for the client to get to the login window when it is powered up. Sometimes it will get to the login window in 45 seconds and other times it will take 5 minutes. This is not consistant. if you unbind the client then the computer will behave properly consistantly.
I have tried binding the client to the od master using the fully qualified domain name and the ip address with the same results.
the search path on the server is "dc=osx1,dc=erm,dc=sd,dc=bc,dc=ca" and on the client it auto populates at cn=config,dc=osx1,dc=erm,dc=sd,dc=bc,dc=ca".
I have changed the search path on the client to match the search path on the server with no success as this is what used to work for us on panther setups.
But this school has a panther client i am working on at the same time with the same applications installed and system preference settings and when i bind it to the same od master with the same search path that is displayed on the server it works fine. all users work, all groups and work groups work.
Dns appears to be working. lookup provides the correct forward and reverse lookup info on the server, if i use either the panther or tiger client and use lookup with the servers fully qualified domain name and ip address i get the correct answers back.
I had this problem before where tiger gave me slow to login screen problems but panther wouldnt when bound, and apple told me that it was because i had afp guest access disabled on the server. Enabling it resolved the issue about 6 months ago at another site but this time when building the server i made sure it was on from the start even thoug it is off by default.
Any suggestions, i am pulling my hair out and about 8 working hours from a deadline.

I've seen this a lot.
This Knowledge Base article refers to Active Directory but we've seen this fix login delays with OD-only environments too:
http://docs.info.apple.com/article.html?artnum=303841
Another one of the causes is when you have multiple network mounts and your AFP service has guest access disabled. The loginwindow is trying to authenticate to each share with the username given and it is failing when that user account is not authorised for that share.
Another can be the LDAP timeout value(s). Try adjusting these in the LDAPv3 plug-in.
Also make sure your network ports have portfast/faststart set on the Mac ports. Sometimes because of STP the port isn't initialised fast enough for the OS when it's ready to start LDAP'ing.
Let me know if any of this helps.

How to refresh a table results before getting new results ?

Hello,
I receive in a table results from a BI query that is first fed from a selection screen with different dropdowns.
My problem is the following:
- when a new selection is made, the table is updated with new results : OK
- BUT when the result of the query is empty, the table keeps the last results
How can I fix this problem?
Any idea,
Thanks a lot,
Thomas

OK, the model is really simple:
- Form with several selection dropdowns
- BI query
- table with results
Everything is OK but, if there are already results in the table AND the user starts a new search that provides no result (no applicable data), the table is not updated and shows the last results, which is a problem ...
Thanks,
Thomas

I am no longer able to open new tabs. When I click the button, nothing happens. Help!

Clicking "Open a new tab" in my browser does nothing. However, if I right click a link from an existing tab and then click open a new tab, the new tab opens and the page loads. The button on the browser, the one with the + in the middle, it does nothing. HELP!

Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened. The Ask toolbar can be installed as part of Foxit.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

Want to save my pictures before getting new phone.

How do I download pictures to my computer?

I'll be happy to help! Here is some info on transferring pictures. http://vz.to/1exmcFv
MarquiaF_VZW
Follow us on Twitter @VZWSupport

I get error messages frequently when changing windows or starting firefox

this is the fourth time i'm trying to contact you guys. i keep getting error messages when i changed windows saying oops this is embarassing... etc. try again button works sometimes, sometimes not, if not have to restart, erases my bookmark menu tabs which i LOVE, and sometimes they come back. i love you guys so much more than internet explorer, but i have had to use internet explorer now almost all the time because of this problem. also, if you could make it so that one can delete blocks of unwanted email (like click the first unwanted email and the last one and then control/shift like in the old days) that would be AWESOME, but i have found that i can't do this in other applications anymore either so maybe it's something windows operating systems took out as they make new versions, but if you guys could create it in your email site wow, everyone would LOVE YOU!!!!!! so many do already, all my IT guys use you and my friends who are halfway computer literate. i hope you can help me with my problem, also i think i read you partner with clients for their websites to improve/add features. is that true? i'd love to do that if so, i'm using go daddy now, and haven't done half the stuff i want to do on my site. thank you for your positivity and you guys make up for those nasty virus makers who wreck people's lives, businesses,.. using their brilliance to harm people, it so sad. thank you again. i hope this goes through this time. i think i'm going to copy and paste it this time on Word so I can mail it to you if i screw up again!
thank you again so much!
Deborah Wong, MD
== This happened ==
A few times a week
== 5-8 weeks ago ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; MSDigitalLocker; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; .NET CLR 1.0.3705; .NET CLR 1.1.4322; Media Center PC 4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

HOW FRUSTRATING! NOW WHAT IS HAPPENING? WHEN I GO TO ANY WEBSITE THE PAGE FREEZES. TOP OF PAGE READS, MOZILLA FIREFOX NOT RESPONDING, THINK I"LL GO BACK TO IE, WAY TOO MANY ERRORS AND NO TECH SUPPORT ANSWERS

BADI for CJ20N to get the WBS status when changed

Hi all,
Here's the requirement:
I have to capture the previous status and currently changed status of the WBS element in CJ20N T-CODE and save this in the ZTABLE.
Every time the STATUS of WBS element changes..the ZTABLE has to get updated.
Will you please help me out to do this.
I have tried with BADI - WORKBREAKDOWN_UPDATE, could find that the status part is updated after the call to WORKBREAKDOWN_UPDATE.
Thanks and Regards,
Krishna Chaitanya G
Edited by: Krishna Chaitanya G on Apr 27, 2009 6:30 PM

Use BADI WORKBREAKDOWN_UPDATE method AT_SAVE. The WBS elements are in internal table IT_WBS_ELEMENT which has structure PRPS. Use OBJNR to find status with function module
CALL FUNCTION 'STATUS_READ'
EXPORTING
CLIENT = SY-MANDT
 objnr = gs_wbs_element-objnr
 ONLY_ACTIVE = ' '
TABLES
 STATUS = et_status
EXCEPTIONS
 OBJECT_NOT_FOUND = 1
 OTHERS = 2
The statuses are buffered in a separate memory area so be careful if you call any function modules that affect statuses e.g one to create Sales Orders as this initializes the buffered statuses and they are not changed when you save the WBS element. To get round this problem put the current status in a separate memory area carry out the processing that initializes the statuses and then recall the status from memory.
CALL FUNCTION 'STATUS_BUFFER_EXPORT_TO_MEMORY'
 EXPORTING
 i_memory_id = 'ZPSS_STATUS'.
LOOP AT gt_pss_01 ASSIGNING <ls_pss_01>.
 AT NEW sold_to_party.
 CLEAR: ls_order_header,
 lt_order_items,
 ls_order_partners,
 lt_order_partners.
 "Header
 ls_order_header-doc_type = c_rsbill_order_type.
 CALL METHOD <ls_pss_01>-o_pss01->get_sales_area
 IMPORTING
 e_sales_org = ls_order_header-sales_org
 e_division = ls_order_header-division
 e_distr_chan = ls_order_header-distr_chan
 EXCEPTIONS
 not_found = 1.
 IF sy-subrc NE 0.
 CONTINUE.
 ENDIF.
 "Partner
 IF <ls_pss_01>-sold_to_party IS INITIAL.
 CONTINUE.
 ENDIF.
 ls_order_partners-partn_role = 'AG'.
 ls_order_partners-partn_numb = <ls_pss_01>-sold_to_party.
 APPEND ls_order_partners TO lt_order_partners.
 ENDAT.
 "Items
 CLEAR ls_order_items.
 ls_order_items-itm_number = <ls_pss_01>-posnr.
 ls_order_items-material = c_rsbill_material.
 ls_order_items-wbs_elem = <ls_pss_01>-posid.
 APPEND ls_order_items TO lt_order_items.
 AT END OF sold_to_party.
 CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
 EXPORTING
 order_header_in = ls_order_header
 behave_when_error = space "'P' "Save when error occurs
 testrun = space
 IMPORTING
 salesdocument = <ls_pss_01>-sales_order
 TABLES
 return = <ls_pss_01>-bapireturn
 order_items_in = lt_order_items
 order_partners = lt_order_partners.
 ENDAT.
ENDLOOP.
*--Re-fill status from memory
CALL FUNCTION 'STATUS_BUFFER_IMPORT_FROM_MEMO'
 EXPORTING
 i_memory_id = 'ZPSS_STATUS'.
Hope this is of some use

Completely new user id when changing email?

Do you get a completely new user id and consequently lose all post history when updating your e-mail address? (as seems to have happened to me)
Ta,
Trent

trent wrote:
Yeah... too late, I thought it would have been linked - especially since I saw no warnings. No mind I have changed my handle. Was kinda hoping it was just a delay to link my account to existing posts/points. But i think after 5 days it's not going to happen :(. Will just have to do as suggested and bookmark my old handle.Jives giveth.. Jives taketh... Rejoice that Jives has given you the opportunity to start afresh... to build a new reputation using a new email addy and handle... with a fresh flame thrower. Praise be Jives!
PS. What? Think you won't be crazy after 10 years dealing with Jives on OTN?

New style created when changing font size

Whenever I highlight some text and change the font size in
the property inspector, a new style gets created and the text in
the code gets surrounded by 
I do not want this behavior. I just want the text to be
surround by tags. Otherwise I have to make sure this
unwanted style gets put into the style sheet.
help?

> So if the body of my div called content is 10pt by
default
One should never use points on the web. Points are intended
for use on
printed output, not on pixel based screens.
> but I want to change one line to 14pt, i would
> highlight the line and then click the new css rule
button and then create
> a
> class called 14pt?
It depends very much on precisely what you mean in the above.
I will assume
that when you say 'one line' you mean 'one paragraph'. to do
that, you
would create a rule like this -
#content p.special { font-size:16px; }
and then apply the 'special' class to the paragraph in
question by selecting
it with the tag selector, right clicking to get the context
menu, and using
"Set class to -> special".
Or, you could click in the paragraph tag in question and use
the 'Style'
selector on the Property inspector to select "special".
If, instead, you meant one line within a paragraph, then you
would have to
select that text, and surround it with a span tag (using
Ctrl-t). Apply the
'special' class to the span tag, and adjust your rule like
this -
#content span.special { font-size:16px; }
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Johnny the boy" <[email protected]> wrote
in message
news:foqbsv$nkf$[email protected]..
>I am a confused.
>
> You say for me to use CSS rules instead. So if the body
of my div called
> content is 10pt by default but I want to change one line
to 14pt, i would
> highlight the line and then click the new css rule
button and then create
> a
> class called 14pt?
>
>
>

New outputs generated when changing logical system in output master record

Hi!
We are sending documents from ECC 5 to a legacy system via XI/PI. We are about to move from an old XI installation to a new PI installation. The output record used (for example in a billing document) is set up based on logical system. When moving from the old to the new platform, we need to change the output records from the old logical syste to the new logical system. However this leads to generation of new outputs in all billing docs when opened in change mode. This goes also for billing docs where we already generated outputs via lthe old logical system in the past. Is there any solution to prevent the automatic generation of outputs for documents where the condition type already was successfully processed (as it works when the logical system is not changed)?
Best regards
/Björn

Normally the same output is not supposed to be generated, unless 'Multiple issuing' checkbox is checked in the output type configuration.
Also you can probably add a requirement in the output determination procedure and check if output record already exists. Take a look at the standard 'Reprint' routine, kind of the opposite is needed in this case.

Why do I get a program error when changing colors?

I get a 'Could not complete your request because of a program error' when I try to change colors on both the forground/background palette or from the color picker palette. Is there a patch for this?
I am using Photoshop CS6 version 13.0.1.x64

Hi. Because this forum is for beginners trying to learn the basics of Photoshop, I'm moving your question to the Photoshop General Discussion forum.

FF34. How to stop new search starting when changing Search Enigine choice?

I switch a lot between different search enigines, such as IMDB, Mirrium-webster, Wikipedia, YACY ans so on, and with the prior versions when I chose a new Search Engine from the dropdown list it didn't instantly start a new search. I don;t want a new search commenced until I either press Enter or hit the Search Icon. How do I stop FF from doing this? The reason I don;t like FF doing this is because I don;t want the already searched for terms to be automatically used in a new search engine choice. THAT's the reason I choose to use another search engine previously.

You can revert to the old Search Bar scheme like this.
Open up '''about:config''' ''(typed in the Location Bar)''
Right-click and toggle this preference to '''''false'''''
'''browser.search.showOneOffButtons'''
Then restart Firefox.

Automatic PO printing when new and manual when change

hello
where and how can i determine the settings for automatic output message of PO when created but only on request (manual) when the PO is changed?
thanks
Alisa

Reason could be
a) print operation 2 might be maintianed for your message type . 2 means when PO changed ,it can also get printed.
solution:
Remove this indicator 2 for your message type. Then iyou cant output when you cahnge the PO.
menu path:
OLME -- >messages -- >output control -->message types -->Define message type PO -->Fine tuned control PO
hope it clear

Long timeout before getting new DHCP lease when changing VLAN - 5508

Similar Messages

Maybe you are looking for