Long Windows XP loading time???

Hi, I have a very strange problem with my computer.
Whenever I turn my computer on after it has been off for a few hours, the Windows XP loading time is very long. It keeps loading for more than a minute at the Windows XP logo with the blue srolling bar and finally comes to the login screen. This only happens the first time after the computer has been off for a few hours. Once I'm in windows I can reboot several times without any problem, then the loading time is only 17 seconds counted from the second windows starts to load till the login screen. In other words cold boot takes very long to load but not warm boot. What can be the cause of this? I cant figure it out, please help me.
My system:
Pentium 4 Northwood 3.0GHz
MSI P-FISR 865PE
2 X 256MB Corsair Value RAM
Hitachi Deskstar 7k250 160GB SATA
ANTEC SONATA with 380W PSU
Gainward GeForce FX 5900 128MB
NEC 2500A Dvd-burner

How many programs have you got that are booting up while windows xp starts? If you have loads of programs enabled at the startup that can vastly slow your system.
When you are on the desktop. Click on Start Button
Click on Run. In the box type: msconfig. Click on OK.Click on startup, and just disable the programs that you don`t need, ie winrar, win media player, etc. Infact, give me a list of all the programs you have in the startup and we will take it from there.
Also, you might want to adjust your dram settings of your ram. I noticed when I changed my ram from generic ram to a brand name, ie in your case crucial, that it performed slowly, but when I adjusted the ram settings accordingly, my bootup speed increased and it boots up in roughly 25 seconds. You need to get to DRAM Timing in BIOS and manually set the timings first start with setting SPD off, then experiment with the timings.
I suggest that you do try to Relax those Timings..Try 3.0-3-3-8-8 or 2.5-3-4-8-8......You may also want to try uping the VDIMM Voltage a little more, try 2.75V or 2.8V.
Get back to me about point 1 and we will have a look.

Similar Messages

Very long web page load time out

Hello,
In Firefox Android when several resources in a page do not load, Firefox android shows a white page and waits for a very long time to time out those resources and display the rest of the page, while Firefox in PC quickly ignores the time outs within a page and displays the page.
How can I make the android version time out quickly and display whatever is available in a page?
Thanks

Hi FAnDwyHSHoo2K,
There actually is not a feature to do this in the ui. However you may be able to find the about:config entry that controls the timeout default time. [http://kb.mozillazine.org/Firefox_:_FAQs_:_About:config_Entries]

Long Windows Vista Boot Time

Just installed Windows Vista Home Premium SP2 via Boot Camp, all went well with the installation but whenever I boot into Windows it sits at a screen with a black background and a blinking white line at the top left corner. It lasts about a minute and then boots into Windows. Anyone know why it does this?

Blame it on EFI and having to load emulated BIOS and pretend it is on Master Boot Record drive.
I wanted to see what a PC boot process was like, and it varied by motherboard and BIOS (and even what chipset drivers, how many addresses for disk drives and attached devices).
For me the only fix - wish I hadn't applied the one EFI firmware, all it did was add 30 seconds to Windows (improves compatibility for booting Windows on Macs was all it said) was to assemble a comparable PC hardware. About 45 seconds though. Still slower than booting OS X is.

Abnormally Long HDV Project Load Time with CS3

I have a relatively small HDV project, about 30 clips captured with HDVSplit. I find that after the CS3 splash screen goes by and while the project loading progress panel is displayed it takes about 2.5 minutes for the project work space to appear. Everything seems to work fine once the work space is displayed re: CS3 editing functionality.
Has anyone else run into this slow loading problem? Any suggestions as to what may be causing this? The clips are relatively short and the entire sequence on the timeline is less than 15 min.

For Pete's Sake man!
I am new here and there seems to be a few guys that have their heads so far up Adobe's *** that you do not see what you are saying.
I understand Howards frustration.
You people think that everyone must go out and buy All of Adobe's Products. To assume any person must be forced to buy a program they do not want or cannot afford is plain rude and obnoxious.
We are not all professionals like some of you, some of do actually shoot weddings, like myself. Why the heck must I buy more programs than I need (although I won After Effects Already)!!?? If you are all so professional why are you on these forums instead of making features in Hollywood? Dammit I get so upset by some people.
You leave people hating Adobe and their products. I have been reading this forum for about a day now and there is a common pattern. A guy will have a problem, 2 people will complain that he posts on the forums, 3 people will tell him to get rid of his camera, 4 will say buy After Effects or go buy this plugin. It is ridiculous! You are people are insane.
Final Cut Studio is by far a better option, you buy it and it works straight out of the box, no plugins no go buy another application. I am not an Apple supporter is hater, it seems that everyday I struggle with Adobe is one day I consider moving my business to Apple and Final Cut.
Premiere Elements is for kids. I wanted a professional editng program that was able to do it all in one, Adobe seemed to offer this.
Let us think about for a minute lads. It is either PC or Mac, Mac has good points but the initial investment is quite large so let us put it aside for now. PC. What editing software is there for PC. Sony Vegas, Premiere, AVID, Edius, Avid Liquid/Pinnacle, Ulead, Movie Maker, Power Director/Producer, and various others. So what do you chose....
Vegas, just does not have it all you know
Avid Liquid, again it's a bit for beginners
Avid, wow too bg for the guy starting out,
Premiere, the best pick of the bunch,
the rest are for kids and real amateurs.
Buw wait Premiere cannot function on it's own, it needs a plugin to this and a plugin to do that, it forever needs plugins. The only thing it is good for is just SD. I want to edit HD or HDV in Premiere I must go buy Cineform, what a load of crap. I want to do basic little effects,go buy After Effects, I want to colour Grade, go buy this or that plugin.
The cost of Premiere is fairly good, but before you can use it you need to buy After Effects (for effects simple and advanced), Photoshop (for titles), Cineform (well to edit anything actually and to support formats and proper 1920 x 1080 HD 4:4:4 uncompressed), and add that all up and it costs a shitload.
So that leads us back to Final Cut Pro where it all makes sense. You buy one G5, and one Final Cut Studio and it gets the job done all in one wonder. NOBODY OUT THERE CAN ARGUE WITH THE BENEFIT OF THAT!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!11
Now this entire post was pointless since I know everyone out there could not wait to get to the end just they could quote me and argue. You reading this did not even bother to see it from an objective point of view, I know for a fact. Whilst reading you were not listening. So this post was pointless, because nobody will STILL get it.
Disgruntled Adobe End user. I am returning CS3 back to Adobe for a refund.

Long load times. software? hardware? downloads?

in the past few hours i have developed the problem of longer thn normal load times. they went from .25 sec up to 5 or 6sec idk what to do my software ugrades are from earliest to latest, stuffit, wmp for mac osx, istat pro, core duo temp and i have 512 mb of ram any suggestions? oh i have been running itunes and safari

Typical with all computers usually. It's where programs get loaded into RAM and not fully cleared out. Once you reboot the memory gets reset and it's a clean slate. If it's killing performance that much, then why not upgrade the RAM?

Reduce Flex application initial loading time

Comparing to HTML, Flex's initial load time is very long. How
to reduce the initial loading time to the level that is
comparable to HTML's loading time for the page content? Any
best practice or rules to follow?

Ok, OK! What's the specs?
How long is the load time? Please don't say "very long".
Let's see the spec. Oh, and can you give me a load time for the
mythologocal HTML page in question, just so I can compare?
I gotta tell ya, I sometimes take a nap when I'm loading half
the ASP pages I stumble across nowadays.
Here's a page from the Los Angeles times--html--- coming in @
6-7 seconds.
http://latimesblogs.latimes.com/lanow/2009/02/los-angeles-pay.html
Another example: from CNN.com, coming in at about 10-11
seconds. Unbelievable.
http://www.cnn.com/video/#/video/showbiz/2009/02/03/wynter.simpson.scientology.cnn
I've got a 350Kb Flex app using RSLs which loads in about 5
seconds. I'm kicking @ss compared to a lot of professional web
sites out there. Think that's too slow? Compared to what???

Windows loading time is too long!

After I installed Desktop manager ver4.6 to my PC . PC loading time is very long,
It takes 3 minutes to load desktop screen when turning on PC . (without Desktop Manager it takes one and 30 minutes)
Does Anyone have same issue ? OS: XP pro
After finish loading I do not feel slow.
please help me out .
Solved!
Go to Solution.

Do you have the Desktop Manager set to load when the computer boots up? If so you can disable that by going into Add/Remove Programs, select the Desktop Manager and hit the Change/Remove button. Hit Modify, select the BlackBerry Desktop Manager and hit Next. You want to keep going through the wizard to pick the same options you did when installing it. When you're on the last screen before you hit 'Install' uncheck the box that says to start the Desktop Manager when the computer starts.
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Long load times

I am trying to edit a page and I only have a css page which is local linked to the page. It only affects me when trying to work in split or design view. I hav tried disabling the linked files thing and I have tried this http://kb2.adobe.com/cps/887/cpsid_88742.html also, but I am still getting this long time. It seems to only affect the load time when I have the following in my head tag;
<link rel="stylesheet" type="text/css" href="css/main.css"/>
It also slows the performance drastically, If I type the letter "D" then deleete that letter it will freeze up for a for a short period of time. I can not have this when trying to create websites for clients. Any help would be appreciated.
Dreamweaver CS5
Windows 7 - 32bit
3gb RAM
Intel Pentium Dual

http://pokeplanet.co.uk/html.txt thats the html file
http://pokeplanet.co.uk/css.txt thats the css file
also commenting out the css link in the head seems to fix it =/

Long Load Times on Graphic Intensive Games

I'm experiencing some absurdly long load times (1-3 hours) with many games (SPORE, Portal, X:3, etc...) that I believe may be related to how graphically intensive they are. Older games with lower graphics quality (WoW, Civ 4, etc...) load up fine.
When I load any newer game the icon appears in the tray and the computer does nothing else for at least an hour, whereupon the program loads and begins playing immediately--often without any further delays or issues.
I also use Boot Camp to run Windows Vista (Ultimate 32) and experience no delays when running SPORE on Windows.
Below are my specs:
Hardware:
Hardware Overview:
Model Name: iMac
Model Identifier: iMac5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.33 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: IM51.0090.B09
SMC Version: 1.9f4
Serial Number: QP7121Q** <Edited by Moderator>
Network:
Bluetooth:
Type: PPP (PPPSerial)
Hardware: Modem
BSD Device Name: Bluetooth-Modem
Has IP Assigned: No
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: Manual
Exclude Simple Hostnames: 0
FTP Passive Mode: Yes
Auto Discovery Enabled: No
Built-in Ethernet:
Type: Ethernet
Hardware: Ethernet
BSD Device Name: en0
Has IP Assigned: No
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
Proxies:
FTP Proxy Enabled: No
FTP Passive Mode: Yes
Gopher Proxy Enabled: No
HTTP Proxy Enabled: No
HTTPS Proxy Enabled: No
RTSP Proxy Enabled: No
SOCKS Proxy Enabled: No
Ethernet:
MAC Address: 00:17:f2:d4:e8:98
Media Options:
Media Subtype: Auto Select
Built-in FireWire:
Type: FireWire
Hardware: FireWire
BSD Device Name: fw0
Has IP Assigned: No
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: Manual
Exclude Simple Hostnames: 0
FTP Passive Mode: Yes
Auto Discovery Enabled: No
Ethernet:
MAC Address: 00:19:e3:ff:fe:81:ea:7a
Media Options: Full Duplex
Media Subtype: Auto Select
Software:
System Software Overview:
System Version: Mac OS X 10.5.3 (9D34)
Kernel Version: Darwin 9.3.0
Boot Volume: MacintoshHD
Boot Mode: Normal
Computer Name: emeldi
User Name: Mike (mike)
Time since boot: 1 day9:05
ATA:
ATA Bus:
MATSHITADVD-R UJ-85J:
Capacity: 423.4 MB
Model: MATSHITADVD-R UJ-85J
Revision: FCQ5
Serial Number:
Removable Media: Yes
Detachable Drive: No
BSD Name: disk1
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Low Power Polling: Yes
Mac OS 9 Drivers: No
Partition Map Type: Unknown
S.M.A.R.T. status: Not Supported
Volumes:
SPORE:
Capacity: 368.7 MB
Media Type: CD-ROM
Writable: No
File System: ISO Rockridge
BSD Name: disk1s0
Mount Point: /Volumes/SPORE
Volumes:
disk1s0:
Capacity: 368.7 MB
Media Type: CD-ROM
Writable: No
File System: ISO Rockridge
Audio (Built In):
Intel High Definition Audio:
Device ID: 0x83847680
Audio ID: 23
Available Devices:
Headphone:
Connection: Combo
Microphone:
Connection: Internal
Speaker:
Connection: Internal
Line In:
Connection: Combo
S/P-DIF Out:
Connection: Combo
S/P-DIF In:
Connection: Combo
Bluetooth:
Apple Bluetooth Software Version: 2.1.0f17
Hardware Settings:
emeldi:
Address: 00-17-f2-be-d3-95
Manufacturer: Cambridge Silicon Radio
Firmware Version: 3.1965 (3.1965)
Bluetooth Power: On
Discoverable: No
Requires Authentication: No
Services:
Bluetooth File Transfer:
Folder other devices can browse: ~/Public
Requires Authentication: Yes
State: Enabled
Bluetooth File Exchange:
Folder for accepted items: ~/Documents
Requires Authentication: No
When other items are accepted: Ask
When PIM items are accepted: Ask
When receiving items: Prompt for each file
State: Enabled
Devices (Paired, Favorites, etc):
JabraBT125:
Name: JabraBT125
Address: 00-1a-45-81-c4-f6
Type: Headset
Services: Headset, Hands-Free unit
Paired: Yes
Favorite: Yes
Connected: No
Manufacturer: Cambridge Silicon Radio ($3, $978)
Incoming Serial Ports:
Serial Port 1:
Name: Bluetooth-PDA-Sync
RFCOMM Channel: 3
Requires Authentication: No
Outgoing Serial Ports:
Serial Port 1:
Address:
Name: Bluetooth-Modem
RFCOMM Channel: 0
Requires Authentication: No
Diagnostics:
Power On Self-Test:
Last Run: 6/22/08 3:50 AM
Result: Passed
Disc Burning:
MATSHITA DVD-R UJ-85J:
Firmware Revision: FCQ5
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media:
Type: CD-ROM
Blank: No
Erasable: No
Overwritable: No
Appendable: No
FireWire:
FireWire Bus:
Maximum Speed: Up to 400 Mb/sec
Graphics/Displays:
ATI Radeon X1600:
Chipset Model: ATY,RadeonX1600
Type: Display
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: ATI (0x1002)
Device ID: 0x71c5
Revision ID: 0x0000
ROM Revision: 113-xxxxxx-139
EFI Driver Version: 01.00.139
Displays:
iMac:
Display Type: LCD
Resolution: 1680 x 1050
Depth: 32-bit Color
Built-In: Yes
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Display Connector:
Status: No display connected
Memory:
BANK 0/DIMM0:
Size: 1 GB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
Manufacturer: 0x2CFFFFFFFFFFFFFF
Part Number: 0x3136485446313238363448592D3636374433
Serial Number: 0xDB086DDD
BANK 1/DIMM1:
Size: 1 GB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
Manufacturer: 0x2CFFFFFFFFFFFFFF
Part Number: 0x3136485446313238363448592D3636374433
Serial Number: 0xDB086DDC
Power:
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 15
Sleep On Power Button: Yes
Automatic Restart On Power Loss: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: No
Hardware Configuration:
UPS Installed: No
Printers:
Lexmark All In One:
Status: Idle
Print Server: Local
Driver Version: 1.1.3
Default: Yes
URI: usb://Lexmark/Lexmark%20All%20In%20One?location=1d120000
PPD: Lexmark All In One
PPD File Version: 1.0
PostScript Version: (3011.104) 0
Lexmark All In One-1:
Status: Idle
Print Server: Local
Driver Version: 1.1.3
Default: No
URI: usb://Lexmark/Lexmark%20All%20In%20One?location=3d120000
PPD: Lexmark All In One
PPD File Version: 1.0
PostScript Version: (3011.104) 0
Serial-ATA:
Intel ICH7-M AHCI:
Vendor: Intel
Product: ICH7-M AHCI
Speed: 1.5 Gigabit
Description: AHCI Version 1.10 Supported
WDC WD2500JS-40TGB0:
Capacity: 232.89 GB
Model: WDC WD2500JS-40TGB0
Revision: 20.06C04
Serial Number: WD-WCANY2508218
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Mac OS 9 Drivers: No
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
MacintoshHD:
Capacity: 232.57 GB
Available: 11.26 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
Volumes:
disk0s2:
Capacity: 232.57 GB
Available: 11.26 GB
Writable: Yes
File System: Journaled HFS+
USB:
USB High-Speed Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x27cc
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0xfd
Built-in iSight:
Version: 1.84
Bus Power (mA): 500
Speed: Up to 480 Mb/sec
Manufacturer: Micron
Product ID: 0x8501
Vendor ID: 0x05ac (Apple Computer, Inc.)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27c9
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x3d
USB Hub:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: OEM
Product ID: 0x0061
Vendor ID: 0x043d
Lexmark All-in-One:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Lexmark
Product ID: 0x0069
Vendor ID: 0x043d
All-in-One:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Lexmark
Product ID: 0x0060
Vendor ID: 0x043d
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27ca
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x5d
USB Multimedia Keyboard:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: ALCOR
Product ID: 0x9462
Serial Number: Au9462
Vendor ID: 0x058f
USB RECEIVER:
Version: 25.10
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0xc50e
Vendor ID: 0x046d
USB Multimedia Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: ALCOR
Product ID: 0x9410
Serial Number: Au9462
Vendor ID: 0x058f
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27c8
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x1d
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27cb
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x7d
Bluetooth USB Host Controller:
Version: 19.65
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Apple, Inc.
Product ID: 0x8206
Vendor ID: 0x05ac (Apple Computer, Inc.)
IR Receiver:
Version: 1.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Apple Computer, Inc.
Product ID: 0x8240
Vendor ID: 0x05ac (Apple Computer, Inc.)
AirPort Card:
AirPort Card Information:
Wireless Card Type: AirPort Extreme (0x14E4, 0x87)
Wireless Card Locale: USA
Wireless Card Firmware Version: Broadcom BCM43xx 1.0 (4.170.46.7)
Current Wireless Network: ACTIONTEC
Wireless Channel: 9
Firewall:
Firewall Settings:
Mode: Limit incoming connections to specific services and applications
Services:
File Sharing (AFP): Allow all connections
Printer Sharing: Allow all connections
Applications:
com.apple.iChat: Allow all connections
com.apple.ODSAgent: Allow all connections
com.aspyr.empireatwar: Block all connections
com.RealNetworks.RealPlayer: Allow all connections
Locations:
Automatic:
Active Location: Yes
Services:
Bluetooth:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
Exclude Simple Hostnames: No
FTP Passive Mode: Yes
Auto Discovery Enabled: No
PPP:
ACSP Enabled: No
Display Terminal Window: No
Redial Count: 1
Redial Enabled: Yes
Redial Interval: 5
Use Terminal Script: No
Dial On Demand: No
Disconnect On Fast User Switch: Yes
Disconnect On Idle: Yes
Disconnect On Idle Time: 600
Disconnect On Logout: Yes
Disconnect On Sleep: Yes
Idle Reminder: No
Idle Reminder Time: 1800
IPCP Compression VJ: Yes
LCP Echo Enabled: No
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: No
Built-in Ethernet:
Type: Ethernet
BSD Device Name: en0
Hardware (MAC) Address: 00:17:f2:d4:e8:98
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
FTP Proxy Enabled: No
FTP Passive Mode: Yes
Gopher Proxy Enabled: No
HTTP Proxy Enabled: No
HTTPS Proxy Enabled: No
RTSP Proxy Enabled: No
SOCKS Proxy Enabled: No
Built-in FireWire:
Type: FireWire
BSD Device Name: fw0
Hardware (MAC) Address: 00:19:e3:ff:fe:81:ea:7a
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
Exclude Simple Hostnames: No
FTP Passive Mode: Yes
Auto Discovery Enabled: No
AirPort:
Type: IEEE80211
BSD Device Name: en1
Hardware (MAC) Address: 00:19:e3:df:5e:9b
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
Exclude Simple Hostnames: No
FTP Passive Mode: Yes
Auto Discovery Enabled: No
IEEE80211:
Allow Net Creation: Yes
Disconnect On Logout: No
InterferenceRobustness: 0
Join Mode: Automatic
JoinModeFallback: Prompt
MAC Address: 00:19:e3:df:5e:9b
PowerEnabled: 1
PreferredNetworks:
SecurityType: Open
SSID_STR: ACTIONTEC
Unique Network ID: F0FA7942-54E7-409B-A1CA-10B05F3B2EDE
SecurityType: WPA2 Personal
SSID_STR: D Pad
Unique Network ID: A391D57D-A4EC-4B2E-B741-0D6569BD77AB
Unique Password ID: 404D3742-17AA-4C24-A229-7E37725522EA
SecurityType: Open
SSID_STR: linksys
Unique Network ID: FD2A5229-348A-4E90-B4E2-48E4DE62C394
SecurityType: Open
SSID_STR: M and M
Unique Network ID: D980D42A-E76C-4A68-920D-AAC9537C26C9
SecurityType: Open
SSID_STR: default
Unique Network ID: 5A2D9117-3263-46B9-952D-A4463BA5F377
SecurityType: Open
SSID_STR: Sweet Lou's **** Shack
Unique Network ID: FA247542-1EF4-41B6-A242-688E75C85B57
RememberRecentNetworks: 1
Ethernet Adaptor (en2):
Type: Ethernet
BSD Device Name: en2
Hardware (MAC) Address: 00:01:23:45:67:89
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
Ethernet Adaptor (en3):
Type: Ethernet
BSD Device Name: en3
Hardware (MAC) Address: 00:10:32:54:76:98
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
Volumes:
net:
Type: autofs
Mount Point: /net
Mounted From: map -hosts
Automounted: Yes
home:
Type: autofs
Mount Point: /home
Mounted From: map auto_home
Automounted: Yes
Universal Access:
Universal Access Information:
Cursor Magnification: Off
Display: Black on White
Flash Screen: Off
Mouse Keys: Off
Slow Keys: Off
Sticky Keys: Off
VoiceOver: Off
Zoom: Off

That's old info for the HDD space--I've purchased an external, so my main drive stays plenty free, now.

Long loading time if no internet connection available (VS 2005 Redist)

Hallo forum members!
I've been searching for a solution for my problem for a while - without success. It isn't really a critical issue, but quite annoying anyways.
Here's the problem i'm dealing with: I've developed an .NET application using Visual Studio 2005 and the included Crystal Report classes. When deploying my module everything works as expected, offering a decent performance when loading the Crystal Report assemblies provided by the redistributable package - if an internet connection is available. If the system doesn't offer such a connection (e.g. not properly configured proxy settings) the module takes a huge amount of time to be loaded. An examination (using ProcMon) leaded to the conclusion that the Crystal Report assemblies try to retrieve the system connection settings from the registry in order to establish a connection to the internet. This is done only once when loading for the first time.
Has anyone experienced the same problem? What is this connection used for? Is there a way to suppress this behaviour on systems without a valid internet connection in order to avoid this annoying long loading time?
Thanks on advance for your help.
Greetings,
L.F.

Nothing like a good vacation. And I got your christmas present early :). While you were away we (actually one other customer) figured it out. I have written a note re. the resolution that was supposed to be published yesterday, but it's still not out there, so here it is as I submitted it:
Symptom
When a report is loaded is takes between 150 - 180 seconds to display
This is only reproducible on computers with no internet connection
There are no error messages and the report comes up eventually
Reproducing the Issue
Create a Windows application with the following function calls:
new Report()
report.SetDataSource(dataSet)
The function SetDataSource takes 2 plus minutes to execute
Cause
On SetDataSource() an attempt is made to connect to crl.verisign.com
SetDataSource() uses the framework and as per the Microsoft Knowledge Base specified under "Resolution", it is actually the framework that is attempting the connection
Resolution
Solution is described in this Microsoft Knowlege Base:
http://support.microsoft.com/kb/936707
The following Microsoft article also discusses the issue:
http://msdn.microsoft.com/en-us/library/bb629393.aspx
An alternative workaround to the above is as follows:
Open IE and go to the Tools menu and select Internet Options...
Go to the Advanced tab
Find the Security heading
Under the Security heading find "Check for publisher's certificate revocation"
Uncheck this option
Keywords
long time load crl.verisign.com certificate revoked internet
The note will be published here:
https://www.sdn.sap.com/irj/sdn/businessobjects-notes
and the number will be 1270414
Ludek

Load time of reply window

The load time of the reply window is rather long, somewhat of 10-15 seconds (either at home or at the office).
With this feature we will never be able to get into the reach of Dennis/Altenbach/Ben
Laura could something be done about this?
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Well I just timed it:
56 seconds from hitting the reply button until an edit postion..
I append I screenshot I made after 10 seconds:
see attachment
This stays the same while the status bar of Firefox 2.0 says: Connecting with forums.ni.com and waitn for forums.ni.com
Ton
Message Edited by TonP on 01-27-2007 08:49 PM
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!
Attachments:
LoadTime.PNG ‏45 KB

Long loading times and jerky playback

Hello,
I work often with Adobe Premiere CS6 but got an annoying problem.
When I have a project with many clips in the sequence, than I got really long loading times and often the playback is jerky
Is there a function, which reduces the loading times and/or the jerky playback?
I already used "Remove Unused" and "Delete Render Files".
Is it helpful to split the clips to serveral sequences and put all clips together at the end?
My computer specifications:
CPU: AMD Phenom II X6 1055T (2,8 GHz Hexa-Core)
RAM: 8 GB Corsair XMS3 DDR3 1333 MHz (2 GB reserved for other applications)
HDD with Adobe Premiere CS6: Crucial RealSSD C300 CTFDDAC064MAG
HDD with videoclips: first Samsung Spinpoint F3 1TB (HD103SJ)
HDD with projects: second Samsung Spinpoint F3 1TB (HD103SJ)
Graphic: NVIDIA GeForce GTX 460
OS: Microsoft Windows 7 Home Premium (64-Bit)
Is there a bottleneck at my hardware?
Thanks a lot!
Tim

Is there a bottleneck at my hardware?
Yes. The CPU, memory and motherboard. See the Warning here: http://ppbm7.com/index.php/tweakers-page/85-raid-or-not-to-raid
Also read the other articles http://ppbm7.com/index.php/tweakers-page

MuVo2 load time with long playl

I recently purchased a MuVo2 because I liked the form factor and sound quality. The small size of the display wasn't going to bother me because I plan to make liberal use of playlists for driving and what not. I created a playlist of approximately 300 MP3s using Windows Media Player, but when I tried to play it, the MuVo2 would hang. After a few tries I realized that the MuVo2 wasn't freezing, it was just taking a (really, really long) long time to load the playlist. When I pared the playlist down to about 20-30 MP3s, I got the load time down to an acceptable time. However, if I put the same 300 MP3s into a folder and just played the folder, the load time was also acceptable.
My question is: Is the long load time due to the fact that the MuVo2 is a hard dri've based player? If I swapped out the 4GB hard dri've and replaced it with a 4GB compact flash card, would it take the same amount of time to load long playlists? My guess is that it's not because of the hard dri've, because I used to own an iPod and didn't have the same problem with long playlists.
Thanks for any help!

It's most likely WMP.
Try Creative's MediaSource software, and I've also heard good things about using MediaMonkey with the MuVo?.

Long bios load time with gtx970 - maybe need gpu bios update?

I just installed my gtx 970 and it all runs fine. However I get a very long bios load time on boot up. Normally it only takes a second or two with a single beep. With the 970 though I get the single beep and the bios load screen, but it sits at that screen for a long time, then another beep, waiting, eventually another beep, and after some more waiting windows will start to load.
My problem is that now I can also no longer get in to the bios. I have tried even plugging in a ps/2 keyboard to see if maybe that could get me in. The farthest I get after hitting delete to enter is I just end up at a black screen. My mobo has no onboard gpu output, so its not like its trying to go to a monitor I cant see.
So would any gpu bios updates fix this? I am currently at the latest bios for my board which updated it to a uefi bios.
cpu: i7-2600k (yes Im aware I will only have pcie2)
mobo: gigabyte z68 d3-b3
ram: 16gb
gpu: MSI gtx 970 Gaming (previous was an evga gtx 660)
SN:602-V316-050B1412042805

Quote from: lucianobessa on 02-January-15, 10:48:08
Under bios features, is there a option called boot mode select?
Try to switch to "legacy only", save and reboot.
Are you using HDMI connector? Try to use DVI.
Sorry for my english!
I dont remember seeing any boot mode select. As far as connections I am using all DVI for my monitors. I have also tried only having a single one connected in case there were issues with multiple monitors
Quote from: Svet on 02-January-15, 10:56:46
with those old boards, you need ME8 to works with modern cards
ask gigabyte support about it
Thanks Ill try emailing them. Is ME8 some other bios? Just never heard of it before
-edit
After reading up it looks like it was just a revision to allow ivy bridge devices, which happened a long long time ago on a bios update:
Support Intel 3rd generation 22nm E1 stepping CPU (Ivy bridge)
Improve power on issue
Update ME / CPU code
Unless theres something else Im missing about ME8

Long load times and poor application performance

We have packaged and deployed Adobe CC using SCCM within my school division. It pushed out fine, but now when we attempt to open Photoshop (or any other CC app) it has unusually long load times. 2-4 minutes. It seems to be hanging at the "Reading preferences" stage. After the application appears to have started, it takes an unusually long time to actually start working in the application (it appears to just hang).

Hello There,
EXE's always bundle additional files because it is a stand-alone entity. And, if the size 9GB then it will surely take time to load all the files. I'll check with the team again on how we can optimize it. BTW, are the videos inserted as slide video or Event video?
Thanks,
Vish

Long Windows XP loading time???

Similar Messages

Maybe you are looking for