Look at the diff between my retina display and 27 display!

Is this normal? Brand new 15" retina next to brand new thunderbolt display...

Yes, they are clearly different. But the Thunderbolt display is NOT a retina display. I would not expect them to look the same "out of the box." It's actually the same panel as the older Apple LED Cinema Display. It's an LED lit (edge lit) IPS LCD panel vs. the Retina panel's back lit design, and I would have to believe the underlying colorspace of the two is not the same.
I assume the TBolt display is connected to your rMBP. It would appear to be so, and that you are using Extended Desktop mode. Is that the case?
Are you using the same, or a higher resolution, on the TBolt display compared to your rMBP? Have you adjusted the brightness on each display so they are comparably illumnated?
That said, I would have no expectation that the TBolt display (or any other external display) would match your rMBP display. They are not the same technologies. I have no idea why someone at Applecare would suggest otherwise.
If you truly want them to match as closely as possible you will need to calibrate the displays. There are many calibrators available, at different price & feature levels.

Similar Messages

What is the diff between ITS ESS/MSS and Webdynpro ESS/MSS

Hi all,
Could anybody tell me the differences between ITS ESS/MSS and Webdynpro ESS/MSS?
Presently we have ITS based ESS/MSS in our landscape and customer wants to go for Webdynpro ESS/MSS. and Webdynpro ESS/MSS is already installed in the sandbox system where ITS based ESS/MSS is already there.
my doubt is can we install both ESS/MSS in the same server? if it is installed we may get any problems?

Karunakar,
check the compatibility of frontend and backend levels
https://www.sdn.sap.com/irj/scn/wiki?path=/display/profile/marcio+leoni
try to restart the portal and check
Thanks
Bala Duvvuri

What is the diff between SAP Netweaver B1i and B1i that comes with SBO 2007

Hi
There is SAP Netweaver B1i which is used for integration with SAP R3. But when you get SBO 2007 it also comes with B1i. Is there a difference or is it the same tool??
Thank you for your time.

Louis,
B1i on the SAP Business One 2007A Preview release is the same as B1i 2005A as far as what it is and how it works with relation to integrating SAP Business One and R/3. There are new features that are part of B1i 2007A of course that are not in 2005A such as integration with SAP BW, an updated Control Center as well as some other features such as the installation and upgrade routines. You should have a look at the documentation in the ..\Documentation folder and specifically in the "Integration" and "PEP" folders on the preview media. This is also, as mentioned, the PREVIEW version, so there will be updates to it forth coming before general release.
HTH,
Eddy

What is the diff between final cut express and pro

Mac OS X (10.4.8)

They are basically the same programs with a few features (that only pros usually require) missing from FCE.
All the Video Effects and Transitions are the same.
The main differences are concerned with esoteric features like being able to capture video other than DV - things which will not affect most amateurs or even some professionals.
Ian.

Diff between at line selection and HIDE technique

hi all,
       wht is the diff between at-line-selection and HIDE technique.
        wht r code instructor
        wht is extended testing
        how can we find selected error records in session                          method ex:-if there r errors in 4th 9th 13th record.
tthnx in advance

HIDE
Syntax
HIDE dobj.
Effect
This statement stores - in the current list level - the content of the variable dobj together with the current list line whose line number is contained in sy-linno. The data type of the variables dobj must be flat and no field symbols can be specified that point to rows of internal tables, and no class attributes can be specified. The stored values can be read as follows:
For each user action in a displayed screen list that leads to a list result, all the row values stored using HIDE - that is, the row on which the screen cursor is positioned at the time of the event - are assigned to the respective variables.
If a list row of an arbitrary list level is read or modified using the statements READ LINE or MODIFY LINE, all the values of this row stored using HIDE are assigned to the respective variables.
Notes
The HIDE statement works independently of whether the list cursor was set. In particular, variables for empty list rows can be stored - that is, rows in which the list cursor was positioned using statements like SKIP.
The HIDE statement should be executed immediately at the statement that has set the list cursor in the row.
Outside of classes, constants and literals that cannot be read in list results and in the statement READ LINE can be specified for dobj outside of classes.
Example
Storing square numbers and cubic numbers for a list of numbers. The example shows that arbitrary variables can be stored independently of row content. In the real situation, one would more likely store only the number and execute the calculation, when required, in the the event block for AT LINE-SELECTION.
REPORT ...
DATA: square TYPE i,
      cube   TYPE i.
START-OF-SELECTION.
FORMAT HOTSPOT.
DO 10 TIMES.
    square = sy-index ** 2.
    cube   = sy-index ** 3.
    WRITE / sy-index.
    HIDE: square, cube.
ENDDO.
AT LINE-SELECTION.
WRITE: square, cube.
AT LINE-SELECTION
Syntax
AT LINE-SELECTION.
Effect
This statement defines an event block whose event is triggered by the ABAP runtime environment during the display of a screen list - provided the scren cursor is on a list line and you select a function using the function code PICK. Through the definition of this event block, the standard list status is automatically enhanced in such a way that the function code F2 and, with it, the double-click mouse function is linked up to the function code PICK.
Note
If the function key F2 is linked with a function code different than PICK, each double click will trigger its even, usually AT USER-COMMAND, and not AT LINE-SELECTION.
Example
This program works with the standard list status. A line selection with the left mouse key causes the event AT LINE-SELECTION and creates details lists.
REPORT demo_at_line_selection.
START-OF-SELECTION.
WRITE 'Click me!' COLOR = 5 HOTSPOT.
AT LINE-SELECTION.
WRITE: / 'You clicked list', sy-listi,
         / 'You are on list', sy-lsind.
IF sy-lsind < 20.
    SKIP.
    WRITE: 'More ...' COLOR = 5 HOTSPOT.
ENDIF.
Thanks,

What is the diff b/w web as and Netweaver 7.0.

hi
SAP 4.7 is based on Web AS
ECC 6.0 is based of Netweaver 7.0.
pleze illusterate this one

Now SAP evolved into using the Internet technology and is called as service oriented architecture (SOA). There are lots of functionalities available in ECC 5.0 and ECC 6.0 compared to R/3 in integrating with other systems. Probably to understand the specific release dependent changes, you can go thro the help documentation. For example to understand the diff between ECC 6.0 and ECC 5.0
1.      ECC 6.0 enables Business area posting - Segment reporting made easy.
2.      Profit center accounting is through new GL.
3.      Document splitting: Split of entry to post assets and liabilities to respective profit centers. (Balance sheet items)
4.      Enables commitment of FM, improved CRM feature & Mobile sales feature
Here are the list of Transactions not their in ECC 6.0
QAS1 Download Insp. Specs. (Obsolete)
QAS2 Download Basic Data (Obsolete)
QAS3 Upload Results (Obsolete)
QAS4 Upload UD (Obsolete)
WLF1K Report used to generate WLF1K is: SAPLWLF1
O07C Report used to generate O07C is: SSFPSEMAINT

Diff between Phy inv number and Phy Inv reference in Mi01,Mi09

Hello Experts....
need ur help!!
Can any one explain me what is the diff between Physical inventory number and Physical Inventory Reference in MI09 tcode.Entry count w/o reference document.
Thanks in advance

sapppfresher wrote:
Hello Experts....
>
> need ur help!!
>
> Can any one explain me what is the diff between Physical inventory number and Physical Inventory Reference in MI09 tcode.Entry count w/o reference document.
>
> Thanks in advance
hi,
Physical inventory number
Specify a number or name under which several inventory documents can be grouped together for improved processing
Reference Number for Physical Inventory
Specify the number of a document outside the system that relates to an inventory transaction.
means if you are using MI01 then you have to maintain the data in mi04 . but you are using mi09 no need to maintain the datad directly you are go through with mi07 for posting the differences.
thanking you.
Edited by: A.Purihella on Oct 13, 2011 8:19 AM

Diff. between R/3 CIC and CRM CIC

Hi,
What is the diff. between R/3 CIC and CRM CIC?
Thanks

Hi Devi,
In CRM, SAP providing Marketing activities, Services and sales Activities.
We can call ECC transactions by using Transaction Launcher.
We use scripts in CRM (Interactive and Remainder)
For more information visit: http://help.sap.com/saphelp_crm50/helpdata/en/b3/bbc13806684a1eb86b2821ab92827f/frameset.htm
Reward points if helpful.
Srini.

Diff between Item Amount Check and Stochastic Block

Hi,
what's the diff between Item Amount Check and Stochastic Block in LIV??

Item Amount Check
The system calculates the sum of the value invoiced so far for the
order item and the value of the current invoice and compares it with
the value limit of the purchase order. It then compares the
difference with the upper percentage and absolute tolerances
defined.
Stochastic Block
You can block all invoices to check them again through Stochastic block automatically. If the stochastic block is active and you post an invoice that is not subject to any other blocking reason, it can be selected for blocking.
Please make a note that- A stochastic block is not set at item level, but for the whole invoice. If a stochastic block is set when you post the invoice, the system automatically sets an R in the field Payment block in the document header data; there is no blocking indicator in the individual items.
In Customizing for Invoice Verification, you can define:
-If stochastic blocking is active
-The degree of probability of a block. You set a threshold value and a percentage for this.
If you enter a threshold value of zero and a percentage of 99.9%, all invoices would then be blocked automatically.

Diff between R/3 ECC5 and ECC6

Dear All,
Can someone please enlighten me about the diff between R/3 ECC5 and ECC6?
Thanks,
Ashish

May be there are lot of differences but broadly:
the Inclusion of Netweaver Components happened from 4.t to ECC5.0 and ECC 6.0
In ECC 5.0 the component versions of netweaver are of different versions but in ECC6.0 all componet versions of netweaver are same and latest.
Unicode is another important thing for ECC6.0 and 5.0
AP ECC 5.0 is part of SAP ERP 2004---- which runs on SAP NetWeaver 2004
SAP ECC 6.0 is part of SAP ERP 2005 (mySAP 2005)--- runs on SAP NetWeaver 2004S
Main difference is application components and availability of new features.
for new features/changes in core modules like FI, MM etc.. e.g GL function is new in ECC 6.0..
For Functionality Differences between the SAP Versions.
http://help.sap.com/saphelp_nw2004s/helpdata/en/60/d6ba7bceda11d1953a0000e82de14a/content.htm
http://www.id.unizh.ch/dl/sw/sap/upgrade/Master_Guide_Enh_Package_2005_1.pdf
To find the changed transactions between SAP versions pls check the table PRGN_CORR2.
also refer,
http://www.id.unizh.ch/dl/sw/sap/upgrade/Master_Guide_Enh_Package_2005_1.pdf
Also Pl. follow the link for difference between ECC 6 & ECC 5.0
Release Info:
ECC 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
ECC 5.0:
http://help.sap.com/saphelp_erp2004/helpdata/en/c6/feda40ebccb533e10000000a155106/frameset.htm
http://solutionbrowser.erp.sap.fmpmedia.com/
regards,
srinivas
<b>*reward for useful answers*</b>

Diff between Precalculated Value set and Precalculated web template

Hi Friends
Can any one tell the Diff between Precalculated Value set and Precalculated web template
Where we will use these
Thanks

Hi,
The Reporting Agent is a tool used to schedule reporting functions in the background.
The following functions are available:
●      Evaluating exceptions
●      Printing queries
●      Pre-calculating Web templates
●      Pre-calculating characteristic variables of type pre-calculated value sets
●      Pre-calculation of queries for Crystal reports
go through,
pre-calculated value sets
[http://help.sap.com/saphelp_nw04s/helpdata/en/28/734d3caa70ea6fe10000000a114084/frameset.htm]
[http://help.sap.com/saphelp_nw04/helpdata/en/84/00783b3af21f5ee10000000a11402f/content.htm]
Pre calculating Web template:
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9e/9f653ade969f4de10000000a114084/frameset.htm
Basically when you have a Precalculated Template, the system first run a report (which has been scheduled) and read the data from there when you run your template. This can imrpove the performance respect to online read data.
[http://help.sap.com/saphelp_nw04s/helpdata/en/6e/b5663a5fb46752e10000000a11402f/frameset.htm]
[Pre calculated web template;
Hope this helps...

Diff Between Dashboard 4.0 and 4.1

Hi I just download
SAP Crystal Dashboard Design 2013
trial Version
But I want to know what is the diff between Dashboard 4.0 and 4.1
My Old Version is 6.0.4.0, Build 14,0,4,738
And New One is
Dashboard 4.1 SP1, Version 14.1.1.1036
Can any one help

Hi,
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/809f9f8e-8f32-3110-f8bf-e34cd2298343?QuickLink=index&overridelayout=true&58858231833809
SAP - Steer a course for business success with affordable business intelligence
Regards,
Suman

Diff between LIS,LO,COPA and Genric extarctions.

HI,
Can anyone brief me the diff between LIS,LO,COPA and Genric extarctions.

Hi,
LIS:
The Logistics Information System (LIS) is a data warehouse used for reporting in all of the application areas in Logistics (LO).
Typically, the data stored in the LIS is an aggregated subset of the data stored for your transactions. For example, you would not usually find the full information stored with all sales order documents. Instead, you would find key field values such as order quantities, total order costs, and item costs. These values could also be stored according to business entities such as sales organization, distribution channel, division, and sold-to party. Similarly, the document detail for all material movements is typically not stored, but the aggregated stock quantities and values are stored based on plant and material.
COPA:
Profitability Analysis (PA) is an integrated component in the SAP R/3 system.
All of the data related to profitability from the other SAP R/3 applications is mapped in CO-PA in accordance with the corresponding business transactions.
This allows you to transfer into CO-PA billing document data from SD, cost object costs from CO-PC, and overall costs from overall cost controlling.
CO-PA collects all of the OLTP data for calculating contribution margins (sales, cost of sales, overhead costs)
CO-PA also has powerful reporting tools and planning functions
Generic Extractors:
When should you use generic extractors?
Business Content does not contain a DataSource for your application.
The application does not feature its own generic delta extraction method
You are using your own programs in SAP R/3 to populate the tables
The tools for generic data extraction can be used to generate an extractor for all applications.

What is the diff in term of fastness and performance between retina and last mbp version in percentage ?

What is the diff in term of fastness and performance between retina and last mbp version in PERCENTAGE ?
Ty to not give links i want an answer here and now by someone who knows what hes talking about.

But old mbp is not available with ssd you have to buy the option right ?
Anyway, outside reboot speed is there a speed difference between retina and old version in term of general processing ?
I have a 2009 MBP that originally came with a SATA drive. Recently, I swapped drives; now, it has 512GB SSD. In other words, you can easily increase the speed of a standard MBP. There is going to be an increase in general processing with the Retina MBPs, but the significance depends on the application. For example, booting Photoshop used to take just over 30 seconds with a SATA drive; with an SSD, it's just under 10 seconds. But controlling for the SATA vs SSD, the differences are smaller and incremental.
Ok you speak about a diff with the retina in term of better graphics when zooming but will this advantage be relevant also on my external giant monitors ?
I can't answer that, so I'll leave that to someone with more expertise in this area.

Can "Sims 3" and its' expansions pack be played on the Macbook Pro w/ Retina Display?

I am thinking about purcashing the new Macbook Pro w/ Retina Display. I would like to know if "Sims 3" and its' expansions packs are playable on this mac with the assistance of an Apple USB Superdrive.

Yes, The Sims 3 and all its expansions are perfectly playable on the MacBook Pro with Retina display (though I don't recommend installing it using Remote Disc as it will take a couple of hours at best to completely install everything).
Playing it at 2880 x 1800 makes everything look great... except for the incredibly small UI elements. The game looks slightly fuzzy at 1440 x 900, which is to be expected given how Apple handles scaling with the Retina display. If you can't live with the fuzziness, you'll have to find a happy medium between 1440 x 900 and 2880 x 1800. And hey, if you decide you can play it at 2880 x 1800, more power to you!

Look at the diff between my retina display and 27 display!

Similar Messages

Maybe you are looking for