Look at videos on television

i m french so sorry if there isn't written correctly sometimes.
I have problems with brought out television : when i connect ipod with television and i want to launch a video i read on ipod "tv out enabled" whereas i put good settings. What have i to do please ?

You have to have the Apple-brand Video Out cables. The iPod Classic does not work with any Third Party Video-Out cables.

Similar Messages

I have rented a movie on iTunes and saw it downloading. Where is it now?? I have looked under videos, as someone suggested, but there is nothing there and no "rentals" tab - or any other tabs to choose.

I have rented a movie from iTunes but where is it now? I have looked under videos,as someone suggested, but there is nothing there and no tabs to choose.

It does take some time for a movie to download, could it still be downloading ? Also the rental tab is only there when you have rented a movie. If all else fails talk to iTunes support, they have helped me in the past.

I am having trouble looking at video podcasts on my ipod touch. they are all greyed out. I have tried removing them and resyncing. this did not work. any ides?

I am having trouble looking at video podcasts on my ipod touch. they are all greyed out. I have tried removing them and resyncing. this did not work. any ideas?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all media and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

When looking at videos on Facebook I get an error that says something went wrong try again

When looking at videos on Facebook I get an error that says "something went wrong try again"

Are you running modified software on your phone? This error seems to be common if the firmware has been modified and you're trying to restore the phone again.

Looking for video capture devices

when I tried to compile a web cam capture program, I have the following Exception:
Looking for video capture devices
No VFW video detected: JMFSecurityManager: java.lang.UnsatisfiedLinkError: no jmvfw in java.library.path
Please,I need ahelp.

Hi I can recommend v4l4j to capture for video streams with linux. I need a library of functions to quick show video from webcam in JFrames and it did it for me.
try it : http://v4l4j.googlecode.com

Fake still images to look like video

Hi.
I'm adding some still images to a project. And they look rather dull. I don't want to move them arround, instead I had the idea to add a grain effect to make them look like video. I can't find any effect to do this in FCP 5.1. Any ideas?
Message was edited by: Steinninn

[CGM Aged Film|http://www.apple.com/downloads/macosx/video/cgmagedfilmle_eiperlecgmtv.htm l] has a grain control, just turn off the dirt, hairs and tint controls.
You could also mix in a tiny amount of noise: Effects > Generators > Render > Noise.

How can I get a better looking NTSC video showing on an Apple TV?

Filming on Mini DV tapes using a JVC GY-DV500 camcorder. Capturing via Firewire 400.
What I've been doing is capturing and editing with the DV NTSC 48 khz presets. I export "using QuickTime conversion" for Apple TV. The problem I have is that the video looks extremely pixelated when viewing it on the screen or computer. It looks like square pixels instead of non-square.
I realize that I'm blowing up a 720x480 signal onto an HD screen hooked to an HD source, but it's still a very low-quality look for that. I've tried setting the Apple TV to 480p or exporting at different qualities using different codecs.
If I try to capture with a different preset (ie. DV50 NTSC) I get the error that it had trouble reading from the source tape. (Is that because it's going through a daisy chain? The camcorder has FW400 but the Mac Pro only has a bunch of FW800.)
My thought process is that an SD television channel looks much better than this so my SD material should be equal quality. Where am I losing it? Capture? Editing? Export?

I don't know what AppleTV can handle as far as bit rate is concerned, but increase the bit rate as high as it will let you. You are taking DV which is 25Mb/s and compressing it. If you're making an H.264, you should get great results needing no more than 6Mb/s. Bear in mind, the higher the bit rate, the larger the file size.

Displaying IPOD Video on Television

I just have a couple questions regarding hooking my 5G IPOD to my television. I have a stereo receiver with a few video input/out connections, which my DVD is currently attached to among other things. When I hook up the IPOD to the stereo, which is hooked up to the TV, I don't get a picture. Is it true that the connection has to be directly to the tv?
My second question regards sound output. The audio when on a tv or run through my car stereo seems to be at a very low level, which requires me to turn the tv volume or stereo volume way up to hear my ipod. Is there a IPOD setting that needs to be changed, so I can better hear the audio from my IPOD through my TV, etc? Does anyone else experience this volume issue?
Any help is greatly appreciated. Thanks.
5G IPOD

Well thanks for the welcome. I always enjoy other
users advise based on experience.
No Problem
I have the stereo connected to the tv with a s=video
cable and I do switch the stereo to the input, which
the IPOD is attached and the tv to the s-video input.
I get sound, but no picture with this connection. I
had heard that the IPOD had to be directly attached
to the tv, but I didn't know if this was fact or
fiction.
I don't know if your stereo can convert from the AV input to the S video. It may need to be connected directly though. Try posting/looking through the connecting to a tv forum.
Does anyone else have the volume issue, where the
volume through a tv or car stereo is real low?
I myself do, and I think this is just because the port is designed for headphones and your car/stereos demand more sound
btabz

Looking for Video playback app, like a DDR

Hello, I'm looking for a program to cue up and playback quicktime files for live broadcast off of the computers hard drive. Kind of like a DDR but all running on the computer. It needs to have the ability to cue up files based on keystrokes, like 123 enter = playack of 123, and be pretty quick about it.
I found Playbackpro.... at WWW.DTVideolabs.com but I'm looking for some other options.
Thank you.

Unfortuately I cant load the clips into quicktime since it's crashing when I load them..
Just hoping for a light weight app that's sole function is video file inspection

Looking for Video call soluation

Dears ;
Good evening I want to know if there is a solution for video calls between 2 citys via VPN link if there is virtual solution or programs
Thanks all and sorry for bad English
Posted by WebUser Mohammadrios Hakawaty from Cisco Support Community App

Hi ,
It is not clear what the specifications of your setup are supposed to look like . However could take a look at "
Cisco Virtualization Experience Media Engine" since you plan on having voice and video in a virtualized environment :
http://www.cisco.com/en/US/products/ps12862/index.html
Hope this helps!
Regards,
Karthik Sivaram

Looking for video effects

Hello everyone:
I'm relatively new to Adobe Premiere CS4 (although I have some experience working with digital video). I seemed to have mustered the controls for Premiere itself but what seems to be lacking in my understanding is how to create certain visual effects with it. I'm looking to create a video clip with effects like in this particular video: (Sorry for the link but it's much more easy to show it.)
http://www.youtube.com/watch?v=ePDR3Pza1_g
What I'm looking for is this:
1. The way they have the Id logo expand, shrink and distort in the very beginning.
2. The "broken TV reception", or "TV-snow" effect. Also the effect how they have the picture twitch at some points.
3. The way they implemented titles in the beginning -- "The Union Aerospace Corporation is the largest ..."
I'm not looking for a free solution in particular, so if someone knows some third-party plug-in, or something I can integrate into Adobe Premiere Pro CS4, I'd greatly appreciate it.
I'm not sure if it's Premiere or After Effects, either. So I apologize if I posted it in a wrong forum.
Thank you in advance.

As for the picture jitter, I'm not sure I saw the appropriate effect for it, but I'll keep looking, maybe I missed something... You said there's an effect for that in AE. I don't really know it that well, so I'm curious, is it possible to take a track from PrPro, send it to AE and then back to PrPro (pretty much like with sound track and Soundbooth)?
Depending on the version of PrPro and whether it's one of the full "suites," you can use Adobe Dynamic Link (DL) to quickly move footage into an AE Comp and back again. Each version of what was once called Production Stuido has improved the function of DL.
Now for the jitter, I seem to recall a plug-in, something like "unsteady cam," or similar. It is just the opposite of "stabilization." Do not recall either the official name, or software company, or even if it was part of an Effects "pack."
Speaking of which, I know it's off topic here, but do you know any idea where can I get some sound effects like in that clip? Maybe even some sound bites/background music/anything.
Not at all OT. Here's a list of SFX and music sites. Some are free, some are for a fee:
http://www.stevengotz.com/audio.htm
http://www.findsounds.com/ISAPI/search.dll
http://www.freesound.org/index.php
http://www.a1freesoundeffects.com/
http://www.ljudo.com/default.asp?lang=tEnglish&do=it
http://www.sounddogs.com/
http://www.soundsnap.com/
http://www.stock20.com/commerce/index.php
http://www.shockwave-sound.com/index.html
http://www.smartsound.com
http://www.ilovewavs.com/Effects/Music/Music.htm
http://www.jamendo.com/en/albums
http://www.5alarmmusic.com/
Also the voices in the beginning sound quite machine-like, is there a software I can use to dictate some text in?
Audition, SoundBooth, and several other audio editing programs have similar Effects, and many more can be added, such as Reverb and Delay. There are also some free VST plug-ins that do a similar distortion. This GOOGLE Search has yielded a bunch of sites for VST's. Some free and some for a fee.
Again, thanks for your input, you can't imagine how much time you've just saved me... As for the video I'm making, it's supposed to be a fun one. When I'm done with it (hopefully in a couple of weeks) I'll post a link here.
No problem. If I can track down that shaky-cam/destabilizer plug-in, I'll post a link to it.
Good luck,
Hunt

Looking for video sharing app to create .mov

Hello,
I hope I am in the right place and apologize if I am not.
I am looking for a foundation to build a video sharing application for Golfswing.com.
We need to allow our visitors to upload video of their swings (these clips are >3 second) in any video format then convert to quicktime for playback.
Why Quicktime you ask? Because Quicktime is the only player that allows frame by frame playback of the golfers swing. Like this,
http://www.golfswing.com/proswings/daly.htm
Any ideas, suggestions, directions, comments, endorsements are greatly appreciated.
Michael J.
Golfswing.com webmaster and owner

ffmpeg supports outputting .mov files. Not sure where you heard otherwise.
Sorry to flood this thread with this but FYI:
executing #ffmpeg -formats in terminal
outputs this (not support for mov file format):
FFmpeg version SVN-r9102, Copyright (c) 2000-2007 Fabrice Bellard, et al.
configuration: --prefix=/opt/local --prefix=/opt/local --disable-vhook --mandir=/opt/local/share/man --enable-shared --enable-pthreads --enable-libmp3lame --enable-libogg --enable-libvorbis --enable-gpl --enable-libfaac --enable-libfaad --enable-xvid --enable-x264 --enable-liba52
libavutil version: 49.4.0
libavcodec version: 51.40.4
libavformat version: 51.12.1
built on Oct 24 2007 10:13:49, gcc: 4.0.1 (Apple Computer, Inc. build 5367)
File formats:
E 3g2 3gp2 format
E 3gp 3gp format
D 4xm 4X Technologies format
D MTV MTV format
DE RoQ Id RoQ format
D aac ADTS AAC
DE ac3 raw ac3
E adts ADTS AAC
DE aiff Audio IFF
DE alaw pcm A law format
DE amr 3gpp amr file format
D apc CRYO APC format
DE asf asf format
E asf_stream asf format
DE au SUN AU Format
DE avi avi format
D avs avs format
D bethsoftvid Bethesda Softworks 'Daggerfall' VID format
D c93 Interplay C93
E crc crc testing format
D daud D-Cinema audio format
D dsicin Delphine Software International CIN format
D dts raw dts
DE dv DV video format
E dvd MPEG2 PS format (DVD VOB)
D dxa dxa
D ea Electronic Arts Multimedia Format
DE ffm ffm format
D film_cpk Sega FILM/CPK format
DE flac raw flac
D flic FLI/FLC/FLX animation format
DE flv flv format
E framecrc framecrc testing format
DE gif GIF Animation
DE gxf GXF format
DE h261 raw h261
DE h263 raw h263
DE h264 raw H264 video format
D idcin Id CIN format
DE image2 image2 sequence
DE image2pipe piped image2 sequence
D ingenient Ingenient MJPEG
D ipmovie Interplay MVE format
DE m4v raw MPEG4 video format
D matroska Matroska file format
DE mjpeg MJPEG video
D mm American Laser Games MM format
DE mmf mmf format
*E mov mov format*
*D mov,mp4,m4a,3gp,3g2,mj2 QuickTime/MPEG4/Motion JPEG 2000 format*
E mp2 MPEG audio layer 2
DE mp3 MPEG audio layer 3
E mp4 mp4 format
D mpc musepack
DE mpeg MPEG1 System format
E mpeg1video MPEG video
E mpeg2video MPEG2 video
DE mpegts MPEG2 transport stream format
D mpegvideo MPEG video
E mpjpeg Mime multipart JPEG format
DE mulaw pcm mu law format
D mxf MXF format
D nsv NullSoft Video format
E null null video format
D nut nut format
D nuv NuppelVideo format
DE ogg Ogg format
E psp psp mp4 format
D psxstr Sony Playstation STR format
DE rawvideo raw video format
D redir Redirector format
DE rm rm format
E rtp RTP output format
D rtsp RTSP input format
DE s16be pcm signed 16 bit big endian format
DE s16le pcm signed 16 bit little endian format
DE s8 pcm signed 8 bit format
D sdp SDP
D shn raw shorten
D smk Smacker Video
D sol Sierra SOL Format
E svcd MPEG2 PS format (VOB)
DE swf Flash format
D thp THP
D tiertexseq Tiertex Limited SEQ format
D tta true-audio
D txd txd format
DE u16be pcm unsigned 16 bit big endian format
DE u16le pcm unsigned 16 bit little endian format
DE u8 pcm unsigned 8 bit format
D vc1 raw vc1
E vcd MPEG1 System format (VCD)
D vmd Sierra VMD format
E vob MPEG2 PS format (VOB)
DE voc Creative Voice File format
DE wav wav format
D wc3movie Wing Commander III movie format
D wsaud Westwood Studios audio format
D wsvqa Westwood Studios VQA format
D wv WavPack
DE yuv4mpegpipe YUV4MPEG pipe format
Codecs:
D V 4xm
D V D 8bps
D V VMware video
DEA aac
D V D aasc
DEA ac3
DEA adpcm_4xm
DEA adpcm_adx
DEA adpcm_ct
DEA adpcm_ea
DEA adpcmimadk3
DEA adpcmimadk4
DEA adpcmimaqt
DEA adpcmimasmjpeg
DEA adpcmimawav
DEA adpcmimaws
DEA adpcm_ms
DEA adpcmsbpro2
DEA adpcmsbpro3
DEA adpcmsbpro4
DEA adpcm_swf
D A adpcm_thp
DEA adpcm_xa
DEA adpcm_yamaha
D A alac
DEV D asv1
DEV D asv2
D A atrac 3
D V D avs
D V bethsoftvid
DEV bmp
D V D c93
D V D camstudio
D V D camtasia
D V D cavs
D V D cinepak
D V D cljr
D A cook
D V D cyuv
D A dca
D V D dnxhd
D A dsicinaudio
D V D dsicinvideo
DES dvbsub
DES dvdsub
DEV D dvvideo
D V dxa
DEV D ffv1
DEVSD ffvhuff
DEA flac
DEV D flashsv
D V D flic
DEVSD flv
D V D fraps
DEA g726
DEV gif
DEV D h261
DEVSDT h263
D VSD h263i
EV h263p
DEV DT h264
DEVSD huffyuv
D V D idcinvideo
D A imc
D V D indeo2
D V indeo3
D A interplay_dpcm
D V D interplayvideo
DEV D jpegls
D V kmvc
EV ljpeg
D V D loco
D A mace3
D A mace6
D V D mdec
DEV D mjpeg
D V D mjpegb
D V D mmvideo
DEA mp2
DEA mp3
D A mp3adu
D A mp3on4
D A mpc sv7
DEVSDT mpeg1video
DEVSDT mpeg2video
DEVSDT mpeg4
D A mpeg4aac
D VSDT mpegvideo
DEVSD msmpeg4
DEVSD msmpeg4v1
DEVSD msmpeg4v2
D V D msrle
D V D msvideo1
D V D mszh
D V D nuv
DEV pam
DEV pbm
DEA pcm_alaw
DEA pcm_mulaw
DEA pcm_s16be
DEA pcm_s16le
DEA pcm_s24be
DEA pcm_s24daud
DEA pcm_s24le
DEA pcm_s32be
DEA pcm_s32le
DEA pcm_s8
DEA pcm_u16be
DEA pcm_u16le
DEA pcm_u24be
DEA pcm_u24le
DEA pcm_u32be
DEA pcm_u32le
DEA pcm_u8
DEV pgm
DEV pgmyuv
DEV png
DEV ppm
D V ptx
D A qdm2
D V D qdraw
D V D qpeg
D V D qtrle
DEV rawvideo
D A real_144
D A real_288
DEA roq_dpcm
D V D roqvideo
D V D rpza
DEV D rv10
DEV D rv20
DEV sgi
D A shorten
D A smackaud
D V smackvid
D V D smc
DEV snow
D A sol_dpcm
DEA sonic
EA sonicls
D V D sp5x
DEV D svq1
D VSD svq3
DEV targa
D V theora
D V D thp
D V D tiertexseqvideo
DEV tiff
D V D truemotion1
D V D truemotion2
D A truespeech
D A tta
D V txd
D V D ultimotion
D V vc1
D V D vcr1
D A vmdaudio
D V D vmdvideo
DEA vorbis
D V vp3
D V D vp5
D V D vp6
D V D vp6f
D V D vqavideo
D A wavpack
DEA wmav1
DEA wmav2
DEVSD wmv1
DEVSD wmv2
D V wmv3
D V D wnv1
D A ws_snd1
D A xan_dpcm
D V D xan_wc3
D V D xl
EV xvid
DEV D zlib
DEV zmbv
Supported file protocols:
file: http: pipe: rtp: tcp: udp:
Frame size, frame rate abbreviations:
ntsc pal qntsc qpal sntsc spal film ntsc-film sqcif qcif cif 4cif
Motion estimation methods:
zero(fastest) full(slowest) log phods epzs(default) x1 hex umh iter
Note, the names of encoders and decoders dont always match, so there are
several cases where the above table shows encoder only or decoder only entries
even though both encoding and decoding are supported for example, the h263
decoder corresponds to the h263 and h263p encoders, for file formats its even
worse

Output 24pn video for television?

Here is the situation. I’m working on a video which I shot 720p 24pn on my HVX200. I need to output the video onto tape to play on local TV channels (so I'm assuming i need to make the tape NTSC 29.97 interlaced, 720x480)
I’m using fcp 5.1.4. My sequence is set to 'DVCPRO HD 720p60' with the frames per second set to 23.97.
*This is my question- What is the best workflow step by step going from the 720p24pn timeline to a NTSC tape?*
Can FCP add the pulldown to the 720p 24pn footage? Id so how do I do that? If not, do I need to use an external plugin like Graeme Nattress GAddPulldownDown to do the pulldown and then convert the frame size with compressor? Any other suggestions? Then do I bring that converted video file back into a FCP DV NTSC timeline and print to tape?
I am not familiar with handling progressive footage and 24fps footage so any advice is much appreciated- I just want to make sure I do it right and it looks the best it can.
Thanks

Where in Montana? I lived half my life in Missoula, and went to college in Bozeman.
You gotta talk to the channel as to what they will take. SD 29.97 NTSC doesn't say much at all. BetaSP, Digibeta, DV, DVCPRO 50, 3/4" Umatic, MII (they had MII at the PBS station in Bozeman...ugh). Don't figure on anything...ask them. Just because it is Montana doesn't mean it is completely backwards. I have no doubt they have beta and digibeta tapes. But, being as low cost as the TV stations must be, I'll wager that DV and DVCAM are more the norm.
If you have a DVCPRO HD deck and you are ouputting DVCPRO HD, ONLY THOSE DECKS will remove the pulldown. And an HVX-200 isn't a DVCPRO HD tape mechanism, that is DV. You cannot downconvert from DVCPRO HD to DV via firewire, much less remove the pulldown, and just dropping a DVCPRO HD 23.98 clip into a DV timeline and rendering won't do it either. FCP is horrid at removing the pulldown. Find a deck and export, or export a self contained file and take it to someone with a Kona or Decklink card.
Man, the faculty at MSU have approached me with the idea of teaching as an adjunct for a year. That is heavy on my mind...
Shane

TS1368 when downloading large files such as videos of television season do you need to turn off autolock to prevent download from halting

when downloading large files such as videos of a television season do you need to turn off autolock to prevent download from halting? And if so, if the download will take a significant amount of time (not sure how much offhand) how do you prevent burn in from prolonged screen image?

Among the alternatives not mentioned... Using a TiVo DVR, rather than the X1; a Roamio Plus or Pro would solve both the concern over the quality of the DVR, as well as providing the MoCA bridge capability the poster so desperately wanted the X1 DVR to provide. (Although the TiVo's support only MoCA 1.1.) Just get a third-party MoCA adapter for the distant location. Why the hang-up on having a device provided by Comcast? This seems especially ironic given the opinions expressed regarding payments over time to Comcast. If a MoCA 2.0 bridge was the requirement, they don't exist outside providers. So couldn't the poster have simply requested a replacement XB3 from the local office and configured it down to only providing MoCA bridging -- and perhaps as a wireless access point? Comcast would bill him the monthly rate for the extra device, but such is the state of MoCA 2.0. Much of the OP sounds like frustration over devices providing capabilities the poster *thinks* they should have.

External output video/to television

hello...i have an ibook G4, 1.33Ghz...can i plug into a television to show videos, etc? if so, using which connection/how?
thanks

Hi Jpee,
Welcome to Apple Discussions
I believe you need a Apple Video Adapter.
Jon

Look at videos on television

Similar Messages

Maybe you are looking for