Look for a table for a field in ECC.

Hello expert,
I want to enhance a datasource with a field, I can find out the position of this field in the ECC system, how can I know which table this field is in?
Many Thank.

That's probably kept in the USRXX tables on the R/3 side of things.
Rob

Similar Messages

Looking for a field "Partner-role"...

Hello,
I am looking for a field and do not know exactly what the field is called and in what table I can find it. It is a partner-role and in our system I should find for example
ZCRM001 and ZCRM002 in it. It may be a table BUT000 or something like that. Anybody how can help me?

Hi,
I think the field that you are trying to find is,
BUT100-RLTYP
In any case I can see BUT100-ROLE in 46C..
Sri

I am looking for country field LAND1 but it is 3 char..where as in SAP

Hi All,
I am looking for country field LAND1 but it is 3 char..where as in SAP all countries have only 2 Char values. why it is defined as 3 CHAR ??
Please let me know !!!
Thank you
Madhu

Hi,
Please check table T005.
Also check this from online help (F1) regarding Country Key.
The country key contains information which the system uses to check entries such as the length of the postal code or bank account number.
The two-character ISO code in accordance with ISO 3166, which is delivered by SAP as a default, is usually used.
It could also be the vehicle license plate country-code or a typical country key, for example, in Germany the Federal statistics office key.
The country keys are determined at system installation in the global settings.
Since the country key does not have to correspond to the ISO code in all installations, programs that differ according to certain values of the country key cannot query the country key T005-LAND1, but have to program based on the ISO code T005 INTCA.
Regards,
Ferry Lianto

Looking for Genre field in iTunes 12 ???

I am using iTunes 12 on an iMac running OS X Yosemite 10.10.1. When I click on the Audiobooks icon within iTunes, the Genre field does not display. It displays for Music, Movies and TV Shows, but not for Audiobooks. When I right-click on the column headings, Genre is not an option (see image below). Is it no longer possible to display Genre for Audiobooks in iTunes 12?

Welcome to the discussions,
every new backup deletes the old one, that's by design. But you can address Apple directly using this link: http://www.apple.com/feedback/iphone.html
As for creating a new backup without getting the old one deleted, if you use your last backup to restore from, it will not be overwritten the next time you sync, this backup will be marked with a date/time stamp. Another workaround is mentioned in this thread http://discussions.apple.com/thread.jspa?threadID=1950351 by tokatta.
If you include the backup folder in your computer backup routine, you can go back and restore the folder if you need to. The location of the backup folder is mentioned in this article "about backups": http://support.apple.com/kb/HT1766
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\

Looking for Extractor sourced from ECC table VMPA

Hello Friends,
Is there any business content extractor sourced from VPMA table in ECC.
This table holds Project system WBS element to Sales order relationship.
Thanks

Hi
Sorry for confusing you, BASOSOURCE contains Inter name. try with SE11 with where used list and select extraction structure in the next screen.
If you got any extraction structure, then we can get the data source name
Hope it helps
Regards,
Venkatesh

I am looking for a field guide to my new sx40 hs powershot.

Amazon has a powershot field guide, but only lists G, S, TX, A, or SD-series cameras as included in the guide. I am not familiar with series similarities. How much good will I get from this guide do you suppose? Thanks.

I have a Lenovo desktop with win8 and 16GB memory. I have an upgraded graphics card with 2GB memory. I am using CS6. My free drive space is in the 300GB range. I keep all data off line on a 1TB Buffalo drive. I am producing a 52 page color magazine that is filled with graphics and ads (40%). I rarely import graphics files and normally always link them. As I am moving around my file sometimes processing is slow. I have turned off the pre-flight and only use it when I am ready to go to the printer. That helps. I wopuld like to get back to sub-second response time and thought a better performing graphics card would help.
Mike.

Looking for a value in a list stored in a database table field

Hello,
I have a field in a database table that contains a comma
separated list on numbers. In my CFQUERY I am attempting to extract
records from the database table where a parsed number is present in
the comma separated list. I have tried the code below, but it is
throwing an error.
variables.publicationID is the number that I am looking for
in the database table field.
publicationList is the name of the database table field
containing the comma separated list of numbers.
where <cfqueryparam value="#variables.publicationID#"
cfsqltype="cf_sql_integer"> in publicationList
Can anybody help?
Many thanks,
smnbin

The only way to do it with the data model you currently have
is as follows:
WHERE publicationList LIKE '#variables.publicationID#' OR
publicationList LIKE '#variables.publicationID#,%' OR
publicationList LIKE '%,#variables.publicationID#,%' OR
publicationList LIKE '%,#variables.publicationID#'
You need to check for 4 cases:
it's the only ID in the list
it's the first ID in the list
it's in the middle of the list
it's the last ID in the list.
The better solution would be to replace this comma-delimited
list with a mapping table, where each row in this mapping table
contains a reference to the main table as well as a single
publicationID.

How to look for the Table Name

Hi Friends,
Sometimes we need to download the table for the desired information if the same is not available from a particular report. How to look for the table name? Is there a report or a particular feild, where we can find the name of the particular table?
Thanks for the assistance.
Regards

Hi Friend,
If you want to see the structures then go to SE11. Sometimes it happens that you cannot find the table names but only fields. In such case, if you want to find the Table names which is not available, then go to SE90.
Abap Dictionary > Fields > Table Fields.
Now Enter the Field name in Right Hand Side of the screen then Execute. You will see the all tables by which that Fields are used.
Regards,
Jigar

Sum for Dynamic Fields in a Dynamic Table with Field Symbol

Hi All,
I currently have an report which I am looking to update with some totals. The information is currently output in an ALV which is fed data from a dynamic table defined with a field symbol. The modification that needs to be applied is a summation per currency code where each of the fields to be summed is a dynamically named field at runtime. I am now just looking to see if anyone has any recommendations on how to obtain these totals it would be appreciated. I have no problem doing the leg work in piecing the solution together but am just stuck on which approach I should be investigating here. I have looked into several options but do to the fact that the totals are for dynamic fields in a dynamic table and it is a field symbol I am having some difficulties thinking of the easiest approach to obtain these totals.
Below is a simple sample of what the report currently looks like and what we are looking to add.
====================================================================================
As-Is Report:
DETAILED DATA ALV
Company Code | Plant | 2006 Total | 2007 Total | 2008 Total | CURRENCY
0001          |   ABCD |    1,500     |    1,200     |    1,700    |    USD
0001          |   BCDE   |    2,300     |    4,100     |    3,600    |    GBP
0003          |   DBCA |    3,200     |    1,600     |    6,200    |    USD
Addition 1:
TOTALS PER CURRENCY
Currency                | 2006 Total | 2007 Total | 2008 Total |
USD              |    4,700     |    2,800     |    7,900    |
GBP                       |    2,300     |    4,100     |    3,600    |
Addition 2:
CONVERSIONS TO USD
                                      | 2006 Curr   | 2006 USD    | 2008 Curr   | 2006 USD   |
USD                       | 4,700 USD   | 4,700 USD   | 7,900 USD | 7,900 USD |
GBP   (1.5GBP/1 USD)    | 2,300 GBP   | 1,150 USD   | 2,300 GBP | 1,800 USD |
====================================================================================
Any recommendations will be appreciated.

Hi,
We cannot use the key word SUM in the loop at assigning statement.
The way i see is
When you are creating the first dynamic internal table , create one more with the structure below:
Currency | 2006 Total | 2007 Total | 2008 Total |
Then while populating the data into first itab,also move the contents to the second itab using collect statement.

Setting default value for form field assoc with a table column

On a "Create Record" situation I was trying to set the default values of some form fields using a page level "Process". These form fields have Source Type = Database Column. It wasn't working, I could only set non-db assoc form field values no matter when the "Process" was set to exec. From some other posts it seems that this is by design, ie. not being able to programatically set the initial values of form fields that are sourced to db columns. I was hoping to have just one "Process" that would exec to set these initial values in one place rather than scattered about for each field that needed a default value. These particular default values come from ref tables and may be different for each user.
So, it looks like I have to use a "Default Value" plsql chunk for each field on the form itself or else set their value on the calling form's Redirect in the "Set these Items" area.
Is this correct?

You could define a database function which accepts the name of the item and the user ID of the user running the application. Based on the item name and the user ID have the function return the appropriate initial value. Invoke this function in a "Default Value" PL/SQL block.
Does that help in centralizing your initial values? You could have one function per page or one function per application. I would do one function per application.

How to provide F4 help for a field in table control

Hi Friends,
I have requirement like below.
1.Create one custom transaction code with header and item information.
2.In item level, we will be designed table control to enter/display the data.
3.Table controls first field will be material number and next DOT number (Material may have many DOT numbers) and so on.
4.First user will enter material number in the table controls first rows first field and go to DOT number field.
5.DOT number has drop down option. If user selects drop down box of DOT number, he gets all the DOT numbers available in database. User selects one DOT number and double clicks on it then it will be populated in DOT number field box.
But for point number 5, business wants like when ever user enters material number in table control first field then select DOT numbers drop down then they want to see the particular materials DOT numbers only in the drop down list for selection. Not all DOT numbers available in data base. Same thing should happen for all item lines in table control.
Please see below example.
Assume data base table has 10 DOT numbers. But material number has only 2 DOT numbers. When ever user enters material number in item level table control and selects DOT numbers drop down then it should show only 2 DOT numbers which are related to particular material number. Not all 10 DOT numbers.
Could you please suggest me, how can we achieve this?

Hello,
Check this :-
For POV
Input Help in Dialog Modules
You can call dialog modules in the POV event using the event keyword PROCESS ON VALUE-REQUEST.
PROCESS ON VALUE-REQUEST.
FIELD <f> MODULE <mod>.
After the PROCESS ON VALUE-REQUEST statement, you can only use the MODULE statement together with the FIELD statement. When the user chooses F4 for a field <f>, the system calls the module <mod> belonging to the FIELD <f> statement. If there is more than one FIELD statement for the same field <f>, only the first is executed. The module <mod> is defined in the ABAP program like a normal PAI module. However, the contents of the screen field <f> are not available, since it is not transported by the FIELD statement during the PROCESS ON HELP-REQUEST event. You can now program your own value lists in the module. However, this procedure is only recommended if it really is not possible to use a search help. Defining search helps is much easier than PROCESS ON VALUE-REQUEST, since the system takes over some of the standard operations, such as getting field contents from the screen. It also ensures that the F4 help has a uniform look and feel throughout the system. Furthermore, it means that you do not have to reassign input help to fields on each screen.
Despite the introduction of search helps (and search help exits), there are still cases in which you need to use parts of the standard F4 functions directly. In this case, there are some standard function modules that you can use in the POV event. They support search helps, as well as all other kinds of input help, and are responsible for data transport between the screen and the input help. These all have the prefix F4IF_. The most important are:
F4IF_FIELD_VALUE_REQUEST
Calls the input help of the ABAP Dictionary dynamically. You can pass the component names of a structure or database table of the ABAP Dictionary to the function module in the import parameters TABNAME and FIELDNAME. The function module starts the ABAP Dictionary input help for this component. All of the relevant screen fields are read. If you specify the import parameters DYNPPROG, DYNPNR, and DYNPROFIELD, the users selection is returned to the corresponding field on the screen. If you specify the table parameter RETURN_TAB, the selection is returned into the table instead.
F4IF_INT_TABLE_VALUE_REQUEST
This function module displays a value list that you created in an ABAP program. The value list is passed to the function module as the table parameter VALUE_TAB. If you specify the import parameters DYNPPROG, DYNPNR, and DYNPROFIELD, the users selection is returned to the corresponding field on the screen. If you specify the table parameter RETURN_TAB, the selection is returned into the table instead.
There are also two function modules - DYNP_VALUES_READ and DYNP_VALUES_UPDATE - that can read the values of screen fields and return values to them during the POV event. For further information, refer to the relevant function module documentation.
Input help in dialog modules
REPORT DEMO_DYNPRO_F4_HELP_MODULE.
TYPES: BEGIN OF VALUES,
CARRID TYPE SPFLI-CARRID,
CONNID TYPE SPFLI-CONNID,
END OF VALUES.
DATA: CARRIER(3) TYPE C,
CONNECTION(4) TYPE C.
DATA: PROGNAME LIKE SY-REPID,
DYNNUM LIKE SY-DYNNR,
DYNPRO_VALUES TYPE TABLE OF DYNPREAD,
FIELD_VALUE LIKE LINE OF DYNPRO_VALUES,
VALUES_TAB TYPE TABLE OF VALUES.
CALL SCREEN 100.
MODULE INIT OUTPUT.
PROGNAME = SY-REPID.
DYNNUM = SY-DYNNR.
CLEAR: FIELD_VALUE, DYNPRO_VALUES.
FIELD_VALUE-FIELDNAME = 'CARRIER'.
APPEND FIELD_VALUE TO DYNPRO_VALUES.
ENDMODULE.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE VALUE_CARRIER INPUT.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
TABNAME = 'DEMOF4HELP'
FIELDNAME = 'CARRIER1'
DYNPPROG = PROGNAME
DYNPNR = DYNNUM
DYNPROFIELD = 'CARRIER'.
ENDMODULE.
MODULE VALUE_CONNECTION INPUT.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = PROGNAME
DYNUMB = DYNNUM
TRANSLATE_TO_UPPER = 'X'
TABLES
DYNPFIELDS = DYNPRO_VALUES.
READ TABLE DYNPRO_VALUES INDEX 1 INTO FIELD_VALUE.
SELECT CARRID CONNID
FROM SPFLI
INTO CORRESPONDING FIELDS OF TABLE VALUES_TAB
WHERE CARRID = FIELD_VALUE-FIELDVALUE.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'CONNID'
DYNPPROG = PROGNAME
DYNPNR = DYNNUM
DYNPROFIELD = 'CONNECTION'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = VALUES_TAB.
ENDMODULE.
The next screen (statically defined) for screen 100 is itself. It has the following layout:
The input fields have been adopted from the program fields CARRIER and CONNECTION. The pushbutton has the function code CANCEL with function type E.
The screen flow logic is as follows:
PROCESS BEFORE OUTPUT.
MODULE INIT.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
PROCESS ON VALUE-REQUEST.
FIELD CARRIER MODULE VALUE_CARRIER.
FIELD CONNECTION MODULE VALUE_CONNECTION.
When the user chooses input help for the individual fields, the following is displayed:
For the Airline field, the POV module VALUE_CARRIER is called. The function module F4IF_FIELD_VALUE_REQUEST displays the input help for the component CARRIER1 of the structure DEMOF4HELP from the ABAP Dictionary, namely the search help DEMOF4DE. The users selection is returned to the screen field CARRIER.
For the Flight number field, the POV module VALUE_CONNECTION is called. The function module DYNP_VALUE_READ transports the value of the screen field CARRIER into the program. The program then reads the corresponding values from the database table SPFLI into the internal table VALUES_TAB using a SELECT statement, and passes the internal table to F4IF_INT_TABLE_VALUE_REQUEST. This displays the internal table as input help, and places the users selection into the screen field CONNECTION.
For POH------------
Field Help
There are three ways of displaying field help for screen elements:
Data Element Documentation
If you place a field on the screen in the Screen Painter by copying a ABAP Dictionary field, the corresponding data element documentation from the ABAP Dictionary is automatically displayed when the user chooses field help (as long as the help has not been overridden in the screen flow logic).
For further information about creating data element documentation, refer to data elements.
Data Element Supplement Documentation
If the data element documentation is insufficient, you can expand it by writing a data element supplement
Data element supplement documentation contains the heading Definition, as well as the following others:
Use
Procedure
Examples
Dependencies
To create data element supplement documentation for a screen, choose Goto ® Documentation ® DE supplement doc. from the element list of the screen. A dialog box appears in which the system proposes a number as the identified for the data element supplement. You can then enter help texts for the above headings using the SAPscript editor.
Data element supplement documentation created in this way is program- and screen-specific. Any data element supplement documentation created in the ABAP Dictionary with the same number is overridden by the screen-specific documentation. You can link existing data element supplement documentation created in the ABAP Dictionary with a screen field by using the table THLPF. To do this, crate a new row in THLPF containing the following data: Program name, screen name, field name, and number of the data element supplement documentation.
To display data element supplement documentation, you must code the following screen flow logic in the POH event:
PROCESS ON HELP-REQUEST.
FIELD <f> [MODULE <mod>] WITH <num>.
After PROCESS ON HELP-REQUEST, you can only use FIELD statements. If there is no PROCESS ON HELP-REQUEST keyword in the flow logic of the screen, the data element documentation for the current field, or no help at all is displayed when the user chooses F1. Otherwise, the next FIELD statement containing the current field <f> is executed.
If there is screen-specific data element supplement documentation for the field <f>, you can display it by specifying its number <num>. The number <num> can be a literal or a variable. The variable must be declared and filled in the corresponding ABAP program.
You can fill the variables, for example, by calling the module <mod> before the help is displayed. However, the FIELD statement does not transport the contents of the screen field <f> to the ABAP program in the PROCESS ON HELP-REQUEST event.
For further information about data element supplement documentation, refer to Data Element Supplements.
Calling Help Texts from Dialog Modules
If data element supplement documentation is insufficient for your requirements, or you want to display help for program fields that you have not copied from the ABAP Dictionary, you can call dialog modules in the POH event:
PROCESS ON HELP-REQUEST.
FIELD <f> MODULE <mod>.
After the PROCESS ON HELP-REQUEST statement, you can only use the MODULE statement together with the FIELD statement. When the user chooses F1 for a field <f>, the system calls the module <mod> belonging to the FIELD <f> statement. If there is more than one FIELD statement for the same field <f>, only the first is executed. However, the contents of the screen field <f> are not available in the module <mod>, since it is not transported by the FIELD statement during the PROCESS ON HELP-REQUEST event. The field help should not be dependent on the user input.
The module <mod> is defined in the ABAP program like a normal PAI module. The processing logic of the module must ensure that adequate help is displayed for the field in question. Instead of calling an extra screen with text fields, you should use one of the following function modules to display a suitable SAPscript document:
HELP_OBJECT_SHOW_FOR_FIELD
This function module displays the data element documentation for components of any structure or database table from the ABAP Dictionary. You pass the name of the component and structure or table to the import parameters FIELD and TABLE.
HELP_OBJECT_SHOW
Use this function module to display any SAPscript document. You must pass the document class (for example, TX for general texts, DE for data element documentation) and the name of the document to the import parameters DOKCLASS and DOKNAME. For technical reasons, you must also pass an empty internal table with the line type TLINE to the tables parameter of the function module.
For further information about how to create SAPscript documents, refer to the Documentation of System Objects documentation.
Field help on screens.
REPORT DEMO_DYNPRO_F1_HELP.
DATA: TEXT(30),
VAR(4),
INT TYPE I,
LINKS TYPE TABLE OF TLINE,
FIELD3, FIELD4.
TABLES DEMOF1HELP.
TEXT = TEXT-001.
CALL SCREEN 100.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE F1_HELP_FIELD2 INPUT.
INT = INT + 1.
CASE INT.
WHEN 1.
VAR = '0100'.
WHEN 2.
VAR = '0200'.
INT = 0.
ENDCASE.
ENDMODULE.
MODULE F1_HELP_FIELD3 INPUT.
CALL FUNCTION 'HELP_OBJECT_SHOW_FOR_FIELD'
EXPORTING
DOKLANGU = SY-LANGU
DOKTITLE = TEXT-002
CALLED_FOR_TAB = 'DEMOF1HELP'
CALLED_FOR_FIELD = 'FIELD1'.
ENDMODULE.
MODULE F1_HELP_FIELD4 INPUT.
CALL FUNCTION 'HELP_OBJECT_SHOW'
EXPORTING
DOKCLASS = 'TX'
DOKLANGU = SY-LANGU
DOKNAME = 'DEMO_FOR_F1_HELP'
DOKTITLE = TEXT-003
TABLES
LINKS = LINKS.
ENDMODULE.
The next screen (statically defined) for screen 100 is 100. It has the following layout:
The screen fields DEMOf1HELP-FIELD1 and DEMOF1HELP-FIELD2 from the ABAP Dictionary and the program fields FIELD3 and FIELD4 are assigned to the input fields. The pushbutton has the function code CANCEL with function type E.
The screen flow logic is as follows:
PROCESS BEFORE OUTPUT.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
PROCESS ON HELP-REQUEST.
FIELD DEMOF1HELP-FIELD2 MODULE F1_HELP_FIELD2 WITH VAR.
FIELD FIELD3 MODULE F1_HELP_FIELD3.
FIELD FIELD4 MODULE F1_HELP_FIELD4.
The components FIELD1 and FIELD2 of structure DEMOF1HELP both refer to the data element DEMOF1TYPE. This data element is documented, and also has two supplements with numbers 0100 and 0200.
The following field help is displayed:
When the user chooses F1 on the input field for DEMOF1HELP-FIELD1, the data element documentation for DEMOF1TYPE is displayed, since the field does not occur in the PROCESS ON HELP-REQUEST event.
If the user chooses F1 repeatedly for the input field DEMOF1HELP-FIELD2, the data element documentation is displayed, along with the supplement documentation for either 0100 or 0200 alternately. The variable VAR is filled in the dialog module F1_HELP_FIELD2.
When the user chooses F1 on the input field for FIELD3, the data element documentation for DEMOF1TYPE is displayed, since this is called in the dialog module F1_HELP_FIELD3 by the function module HELP_OBJECT_SHOW_FOR_FIELD.
When the user chooses F1 on the input field for FIELD4, the SAPscript documentation DEMO_FOR_F1_HELP is displayed, since this is called in the dialog module F1_HELP_FIELD4 by the function module HELP_OBJECT.
Regards,
Deepu.K

Looking for table that links a PM Reservation to a MM Purchase Requisition

Looking for table that links a PM Reservation to a MM Purchase Requisition

Hi,
Typically the way most SAP systems are configured, there are two scenarios here:
1. The component reserved in the PM order is item category 'N'. This is a non inventory item and must be directly procured for consumption against the PM order at the point of goods receipt. In this case no reservation is created and instead a requisition is directly created (in table EBAN) and the requisition is account assigned directly to the PM order (in table EBKN - field AUFNR).
2. The component reserved in the PM order is item category 'L'. In this case no requisition is directly created, instead a reservation is created against the item in stock (in table RESB). If there is sufficient stock of the item already then the item is consumed when it is goods issued to the PM order from stock using MIGO and there is no requisition created. In the event that there is not sufficient stock of the item for the reservations that exist, when MRP is run, a requisition will be created to replenish the stock, but this requisition will not be assigned to a specific PM order as it could be replenishing stock of the item for several reservations which are all for different orders. So in this scenario there is no direct link from the reservation generated by the PM order to the requisition.

Table Maintenance - Add field not in table for display

I have a Z table which has five fields of which one of them is the GL account field. I need to display the description of the account from SKAT-TXT20 also in SM30 so that In SM30 when the user looks at the table, they should be able to see six fields. I can code the PBO / PAI to pull data from the table, but am not sure how to enhance the table control that SAP generates automatically when you generate table maintenance from SE11's Table Maintenance generator so that the sixth field can be displayed.
Thanks

Hi,
I hope below solution will work for your problem:
to update field based on other fields of the same table follow below path and create a routine.
go to se11 open the Z-table in change mode > utilities> table maintenece generator- and then
environment> modification> events....
then creat routine based on your requirement.
regards,
munvar.

How to search for a field in a table

Hello,
I have technical name of a field. How can I check in which table it is contained in. Also, what is the difference between a table and a structure where data is stored.
I want table name of PO text field which is contained in Info Record Text.
How to check table contents.
Regards,
Priyanka

Hi Priyanka,
If you know the technical name of the field, use T CODE SE15.
Select Database Fields.
You can then enter the field name in the Field and execute. System will list all tables containing the field, then you can shortlist the table you are looking for by reviewing the table descriptions.
Hope this helps !

I want the table names for these fields

Customer ID.
     Material Number
     Cross company Purchase Order.
     Delivery date (requested by the company who is placing the purchase order).
     Qty requested.
     Value of the Qty requested     (Value of the Qty requested = Qty requested * Material unit price )
     Currency
     Total pieces shipped (during the time frame set on the report)
     Balance Left ( Balance Left = Qty Requested - Total pieces shipped)
     Value of the balance left      Value of the balance left = Balance left * Unit price only if the Balance left is greater than cero,
                    if the balance left is lower than or equals cero, the value of the balance left show be cero.
     % Delivery      (% Delivery = Total pieces shipped / Qty requested).

Ravi,
OK.
You can look to tables EKPO, EKKO for PO-related fields.
Look to SE84 under   ABAP Dictionary > Fields > Table Fields   - This is search tool for existing names. Or can create custom Y-   and Z- fields, data elements, domains to meet your needs.
Please reward points.

Look for a table for a field in ECC.

Similar Messages

Maybe you are looking for