Look for a vi caller

can anyone let me know how to look for a vi caller. i.e I have abc.vi and I wanna know which other vi call this abc.vi. How can we find who is calling abc.vi?
Thanks,
Solved!
Go to Solution.

ALso, if you are using a LabVIEW project, you can right-click the VI in the project window and select "find...callers"
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

Looking for an Incoming Call App

I am looking for an App simular to one I had on my Blackberry. When someone called in that was in my address book with a picture, the picture was the size of most of the screen. Does this exist for iPhone?

It's built-in to your phone.
To assign a photo to a contact:
Tap Contacts and choose a contact.
Tap Edit and tap Add Photo, or tap the existing photo.
Tap Take Photo to use the camera. Or tap Choose Existing Photo and choose a photo.
Drag and scale the photo as desired.
Tap Set Photo.
If you assign a photo using the phone, it will display full screen. If you assign a photo using your computer's address book, it will display as a thumbnail.

Looking for a International Calling Plan + Data?

Hello,
Let me first start by saying I am deploying to South Korea (Osan AFB) .
I am looking for a plan with unlimited data usage and at least 450 minutes. I was reading about your global phones and south Korea is CDMA so that is good. It looks like I would have to get a new Droid but that's alright.
I have a few questions though:
1. How does the data work for that plan? I don't quite understand how it works.
2. It says its $1.99 per minute, do you really charge by the minute? $1.99 is steep for a minute,
If I used 200 minutes at that rate my bill would cost $398 plus the taxes and other expenses.
3. What can the party I am calling expect? Would it have to be a world phone to?
I am just really trying to figure out how much this would cost.
Thanks,
Freddy

I would strongly reccomend AGAINST trying to use your Verizon service overseas. As you've discovered, the per minute rates are quite high, and your unlimited data plan will not work there, you would need to pay roaming rates for data as well, and they are no more palatable than the voice rates for international service.
Once you get to South Korea, you should research local carriers and get service from one that is affordable and has the services you need, probably a prepaid carrier.
To your last question, Verizon customers are not charged international rates for INCOMING international calls, so you could call back to the States from your local cellphone, landline, or VoIP provider, and they would be charged the same as if they were getting a call from another phone in the US.

I am looking for an addon called Informer. used to fill in forms. new computer and can't find it in lists of add ons. thank you

looking for an add on called "Informer". new computer here and i can' t seem to find it anymore on list of addons. it is used to fill in forms and worked well.
thank you [email protected]

Sorry, I don't recall ever seeing an extension by that name. 
Maybe this one? 
https://addons.mozilla.org/en-US/firefox/addon/informenter/

Looking for a Telephone call recorder app

I have tried a few telephone call recorder apps on my droid X and they just don't seem to work. They are great when the Doctor calls with test results when you are driving.

There are lots of different recording applications on the Android Market Place.
You can go to the Android Market Place on the device, then go to search to find these applications.
Here are two of the higher rated call recording applications:
Phone Recorder
Android Recorder
Android Market Place Applications are not provided by Verizon Wireless and direct support for applications is not offered.

I am looking for a good Call Blocking App for my iPhone 5...any suggestions??

I am in need of a good call blocking app for iPhone....please any suggestions will be greatly appreciated!

As Randy Landry1 says, Google for "silent ringtone", download and install on you iPhone as a ringtone.
Now create a contact for the offending phone number. Assign the contact to the silent ringtone and set no vibrate.
When that number calls it will not ring, nor vibrate. It will light up the screen, but if you do not see that, it will not bother you. They could leave voice mail, but that is easily deleted.
And if it is a situation where the are violating the do not call list, you can use the missed call log to report the number to the FTC.
Also, if the calls are abusive or threading, and the leave a voice mail, you something to show the police.

How to look for New start Called call for a Maintenance plan

Hi,
I need to find out all calls for a maintenance plan of scheduling type- 'New Start' and Status- 'Called'. How to find this using tables.
For 'New Start' scheduling type probably table field and value is MHIS-TERMA = 'N'. There are different statuse in this table but I am not able to identify the status 'called'. Also what is the field MHIS-ZAEHL(Maintenance package number) for?
Thanks,
Vimal

Taken from the standard IP10 program:
* possible status combinations
* TSABR - Scheduling status: planned date called
* TSVBT - Scheduling status: call outstanding
* TSENQ - Scheduling status: call horizon not reached
* TSENM - Scheduling status: stopped manually
* TSTAT - Sceduling status
* TSABR TSVBT TSENQ TSENM TSTAT
* X - - - A called with order
* X - - - - called without order
* - X X - - on hold (TSENQ), due (TSVBT)
* - X X - F on hold, due and fixed
* X - - - X skipped
* - X X X - blocked
* - X X X F blocked
* X - - - - LRMDT <> 0, completed

Looking for methodology of calling a sub (FORM) in BSP

Hello all,
I'm relatively new to BSP. I've written a few one-off web-apps for our team, however one thing I find strange, and am probably barking up the wrong tree in terms of terminology, would be running a sub in BSP. Since it uses ABAP for the sytax, I would have thought that it would use the normal FORM ... ENDFORM, however this ends with an error about ENDMETHOD every time.
I come from an ASP background, and would at times want to use a sub to render an arbitrary chunk of HTML. I just can't find an equivalent for BSP. I've explored just using page fragments, and to a degree this accomplishes what I need. This is not really the best solution, as one or more page fragments may call another one which causes a recursive loop it seems like. Either way, I'd like to avoid page fragments.
Below is a simplified scenario of something I'm trying to acheive. Can anyone point me in the right direction?
<%@page language="abap"%>
<%FORM example.%>
abc123
<%ENDFORM.%>
<html>
<body>
Hello. 
<%PERFORM example.%>
</body>
</html>
Edited by: Mike Howles on Apr 2, 2008 11:40 PM

Hi,
You can put any code you like in a BSP layout between <% %>.
Anyway, if you really want to have something like a sub, you can create a class (transaction SE24), let's say ZCL_EXAMPLE, with one static method called example. This method will have the BSP page context as a parameter:
METHOD example.
DATA out TYPE REF TO if_bsp_writer.
out = i_page_context->get_out( ).
out->print_string( 'abc123' ).
ENDMETHOD.
In the BSP layout:
<%@page language="abap"%>
<html>
<body>
Hello. 
<% zcl_example=>example( i_page_context = page_context ). %>
</body>
</html>
Regards,
Tanguy

Looking for a algorithm called push down atonima??

I am trying to get an example of a search algorithm called a
push down atomina
I think that is the name but not sure.
thanks,
steve

Think you'll be lucky to find anything in the forum on push down automata. Do a search on google, perhaps with the keyword "parser" or "grammer checker" thrown in. There may well be whole books devoted to it!

Looking for an old ID of mine.

I'm looking for a handle called WireTalents. I think it is and old ID of mine but I can't find it.

Find Apple ID
https://iforgot.apple.com/applied
 Cheers, Tom

SpaceX is looking for engineers with LabVIEW experience in Hawthorne CA (LA area)

SpaceX is looking for engineers with LabVIEW programming experience for our Launch group. Our responsibilities include:
Controlling launch pad equipment via PXI/LabVIEW
Commanding and monitoring our Falcon 1 and Falcon 9 rockets via a LabVIEW-based Vehicle control system
Commanding and monitoring our Dragon capsules via a LabVIEW-based Mission Operation system
Ocean recovery of Falcon 1 and Falcon 9 stages after liftoff and Dragon capsules after splashdown
Cargo configuration of Dragon capsules going to resupply the International Space Station
Maintenance of Mission Control Centers with the help of our IT department
With the exception of the launch pad equipment program, most of our LabVIEW programs do not interact with DAQ hardware (unusual, I know). The Vehicle control and Mission Operations software get their data via Ethernet from 'black boxes' that connect to NASA & Commercial RF ground stations. We also create several utility programs in LabVIEW that also don't interact with hardware. So, this is mostly a software gig, not a hardware/software gig.
Ideal candidates will have the following qualities:
CLD-level LabVIEW experience
A good understanding of basic computer networking (TCP/IP, UPD, firewalls, VPN)
Must be enthusiastic about space (What year did we land on the moon? How many men walked on the moon? How many Space Shuttles do we currently have? etc.)
Must be willing to travel. Common destinations include Houston (NASA Johnson Space Center), McGregor TX (test site), Cape Canaveral FL (launch site), Kwajalein Marshall Islands (launch site)
Must be able to work without supervision. We have a very flat management structure, no one will be telling you what you need to do. If you don’t know, ask. If you do know, get it done.
About the job:
Job is located in Hawthorne, CA in the Los Angeles area.
This is not a 9-5 job. There will be some late nights.
You won't be LabVIEW only. Everyone chips in as needed. Our group has done Javascript, C++, MATLAB, configuring of TELEX comm systems, cutting of metal with bandsaws, welding, Unigraphics CAD, etc. If we need it and you don't know it, grab a book and learn.
We are only hiring full time employees. Contractors need not apply.
To conform to U.S. Government space technology export regulations, SpaceX hires only U.S. citizens and U.S. Permanent Residents.
Apply at SpaceX.com. Click the Careers button and fill out the general application. Mention this posting in the cover letter field. Don’t reply to this forum. You need to go to SpaceX.com to get your information into our system.
Message Edited by Lavezza on 03-31-2010 03:59 PM

There is a job posting up now at SpaceX.com. Go to the careers tab and search for LabVIEW.
Look for the position called: Mission Control Software Engineers (LabVIEW).

Looking for font "Indivisible"

Hi
I am looking for at font called Indivisible.
Can anybody help me?
I have been toold it´s a free font, but I am not sure

Indivisible was a free monospaced font produced by the Process Type
Foundry in 2002., with restricted re-distribution, so it doesn't
appear even on legitimate free font sites.
It doesn't appear on their site at all.
You might try contacting them directly.
[email protected]
The font is similar in many respects to the more recent Zolan Mono
BTN, but far from identical.
- Herb

Hello, i m looking for the guide how to

Hello i m looking for this guide called how to, i m begining in BW and some one told me about this guide its very useful, some of you have it? or where can i find it?
i ll give points, thanks

Hi
Go through the basics of any Data Warehousing book.
Then go through the step by step modelling by Fu Fu.
U can enhance the BW skills more by SAP press realses by Norbert Egger.
SDN is always good for all.
If you got an acess to BW server go through the steps ... basics of modelling
BW 7.0
Uploading of master data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1.     Creation of Info Objects
     In left panel select info object
     Create info area
     Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
     Create new characteristics and key figures under respective catalogs according to the project requirement
     Create required info objects and Activate.
2.     Creation of Data Source
     In the left panel select data sources
     Create application component(AC)
     Right click AC and create datasource
     Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
     In general tab give short, medium, and long description.
     In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
     In proposal tab load example data and verify it.
     In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
     Activate data source and read preview data under preview tab.
     Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3.     Creation of data targets
     In left panel select info provider
     Select created info area and right click to select Insert Characteristics as info provider
     Select required info object ( Ex : Employee ID)
     Under that info object select attributes
     Right click on attributes and select create transformation.
     In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
     Activate created transformation
     Create Data transfer process (DTP) by right clicking the master data attributes
     In extraction tab specify extraction mode ( full)
     In update tab specify error handling ( request green)
     Activate DTP and in execute tab click execute button to load data in data targets.
4.     Monitor
   Right Click data targets and select manage and in contents tab select contents to view the loaded data. Alternatively monitor icon can be used.
BW 7.0
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
5.     Creation of Info Objects
     In left panel select info object
     Create info area
     Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
     Create new characteristics and key figures under respective catalogs according to the project requirement
     Create required info objects and Activate.
6.     Creation of Data Source
     In the left panel select data sources
     Create application component(AC)
     Right click AC and create datasource
     Specify data source name, source system, and data type ( Transaction data )
     In general tab give short, medium, and long description.
     In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
     In proposal tab load example data and verify it.
     In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
     Activate data source and read preview data under preview tab.
     Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
7.     Creation of data targets
     In left panel select info provider
     Select created info area and right click to create ODS( Data store object ) or Cube.
     Specify name fro the ODS or cube and click create
     From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
     Click Activate.
     Right click on ODS or Cube and select create transformation.
     In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
     Activate created transformation
     Create Data transfer process (DTP) by right clicking the master data attributes
     In extraction tab specify extraction mode ( full)
     In update tab specify error handling ( request green)
     Activate DTP and in execute tab click execute button to load data in data targets.
8.     Monitor
   Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used
Hope this helps
Cheers
Sunil

Looking for Click Deluxe for nokia and other phone...

I am looking for a game called Click Deluxe. so far I can only find it for the Palm devices. Is there one for the N95 8gg or for mobile phones period? Maybe an alternative to it? A look-a-like perhaps under a different name perhaps?

On a computer go to iTunes>Store>View Account and then Purchase History.

Looking for MCSGTUXCONF

I am looking for a tool called MCSGTUXCONF a BEA engineer has written. It contains
tools for generating HP MC/ServiceGuard config files out of a UBBCONF with "cmmaketuxpkg"
and "cmtuxmon" for monitoring and StartUp/Shutdown of Servers/Applications.
Can anybody drop me a line where I can get the SW from ???
Thank you
Gerhard Hausberger
HP Consulting
Vienna Austria
Tel: +43 1 25000 6452

there are some on ebay if you can get them shipped to you
i used this for searching them on ebay
blackberry Q10 battery cover oem
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Look for a vi caller

Similar Messages

Maybe you are looking for