Look for: components used for Service Brokerage (CSB) for mobile networks

I am looking for developers/company offering components used for Central Service Brokerage (CSB) for mobile networks. It aims to store consumer profiles and directs service requests (shopping, travel & meeting services, hospitality and insurance) from mobile consumers to connected retailers and appointed service providers.
I would be higly interested in almost ready to use components/architecture which can be used in new service/start-up situation.

Hey Anthony,
Yes, a lot to read, thanks for reading though!
For the External Web Services, since I have it set to fe-pool.domain.local right now, I figure this is as simple as flipping it to fe-pool.domain.com within Topology Builder | Enterprise Edition Front End Pools | Edit properties | Web services?
After which, I assume I will need to create a new host A record for fe-pool.domain.com, pointing to the Pub IP 1.2.3.4 I have set up to forward directly onto my FE Server of 18.20? I am a bit of confused as to how this external web service is contacted,
does the mobile app use lyncdiscover.domain.com to find this information? In other words, does the lyncdiscover allow the mobile app to get inside the topology, the topology reports to the mobile app that "Hey, fe-pool.domain.com is going to be your External
web service as defined in the topology" ? If its just that easy this should be a quick change.
As for your next question, on the F5 level I'm pretty certain it is just set to take any packets coming in from pub IP 1.2.3.4 : 80 or 8080, or 443, or 4443, to allow it to go to that FE server IP on any of those ports. I don't believe it is actually taking
a 443 packet, and converting it into a 4443 destination. Also note, I am forcing lyncdiscover to use port 80, instead of 443 because I am unable to get a new pub cert with the lyncdiscover SAN.
As for the domain user, it is simply just my single user and I am flipping the SIP domain in the control panel within the user properties. domain.com and domain.local are both configured SIP domains in my topology, however i have domain.com as the default.

Similar Messages

  • HT204053 for ipad2 Using the same Apple ID for Store purchases and iCloud (recommended) yes/

    hi i am shahram i have ipad2 for ipad 2 using the same apple iD for store purchases and iCloud(recommended) yes or no?

    That's what Apple recommend, it's also how I have mine set up. Although it isn't much of a problem to use a different account (ID) for each service.

  • Delete operation for SQL using Biztalk Service

    Dear All,
    I have scenario like this "I am trying to insert the record to  Multiple Tables in
    SQL. When i got the exception in during the insert of the second table, i want to delete the inserted record from first table. this task achieve from Biztalk service"
    can any one tell the suggestion for this scenario..
    Thanks
    Jegannathan Kumar
    jeganna

    In previous thread, you mentioned that you are using composite operation.
    Data cannot be shared or reused across different operations in a composite operation.
    So, above is not possible with composite operation.
    regards,
    Shailesh

  • Why is "genius for apps" using location services?

    I noticed that in iOS 6, that there is now a "genius for apps" entry under the location -> system services.   Every time I go in there it shows as having been recently used (purple), despite me not having used the App Store genius recently.   It does this on both my iPad and iPhone.
    What exactly is triggering this? Why does app genius need location services?  Could this explain the poor battery life I'm seeing under iOS 6?

    Basilisk wrote:
    When I open iMovie it creates an alert that says iMovie cannot access the photos or videos on the iPad without Location Services being switched on. [...]
    Anyway, it gives some instructions on how to change the settings to enable Location Services for iMovie, but none of the things it says to do appear in Settings. I can't enable Location Services for iMovie in Settings - Location Services, or in Settings - iMovie. I can enable the camera for Location Services, but that makes no difference to iMovie which continues to refuse to edit anything on the iPad.
    The short answer is try connecting the iPad to a computer and doing the initial iPad set-up/registration via iTunes. (Maybe you can do the same thing via iTunes on the iPad.)
    I had the same problem Basilisk describes, on a brand new iPad. I purchased iMovie through the App Store (directly on the iPad), but couldn't do anything with it due to the catch-22 described above. iMovie did not appear under Settings > Location Services so I could not turn on location service for iMovie.
    Subsequently, I connected the iPad to my iMac and went through the first-time set-up of the iPad by iTunes. I selected some music albums and photo albums to sync to the iPad.
    Back on the iPad, iMovie still did not appear in Settings > Location Services, BUT, now when I launched iMove a different dialog box appeared. Paraphrasing, it said, "iMovie wants to use your current location. This will allow iMovie to use location information in your photos and videos. Don't Allow/ Allow."
    I tapped "Allow" (grudgingly) and iMovie was now usable, and it now appeared in under Locations Services.
    The catch-22 situation is a bug. If the iPad setup via iTunes is indeed necessary to get around the impasse, nothing tells the user that.

  • Can we display error messages inline for components used with iteration

    Hi
    While using form components in a table or any some iteration like making use of forEach, I am unable to render the error messages inline. Can someone help me in achieving this?
    Regards
    Honey

    Here's a snippet:
    <af:table var="row" rowBandingInterval="0" id="t1"
    partialTriggers=":cb1"
    value="#{viewScope.table.dataList}">
    <af:column sortable="false" headerText="Name" id="c2">
    <af:inputText value="#{row.name}" id="it2" required="true"/>
    <af:message id="m1" for="it2"/>
    </af:column>
    <af:column sortable="false" headerText="Address" id="c1">
    <af:inputText value="#{row.address}" id="it1"
    required="true"/>
    <af:message id="m2" for="it1"/>
    </af:column>
    </af:table>
    required true would act the same way as a validator. When using the validator, it is placed as a child component of the inputText.
    Regards
    Honey

  • Can I order Macbook pro with Thai keyboard by using online service and ask for ship it to USA???

    Now I am at USA for joining summer program here for 2 months and I really need new notebook now
    so is it possible that I will order Macbook Pro with the Thai keyboard from service in Thailand or Asia which have Thai language on keyboard
    and ask them to ship it here ?????
    thanks for all answer

    Call 1-800-MY-APPLE

  • Determine How long a connection using file services stays active for

    Hello all,
    I am trying to resolve an issue which may be related to the allowable concurrent transactions in Windows 7 Pro. We have a program that runs on 17 computers that connects to a MYSQL 5 database on a master machine running windows 7. There is an action that
    occurs on each of the 17 slave computers initiated by a user. The program creates a file to a network share on the master, however this share isnt a permanant share network share on the slave computers. The program creates the file into a location it is told
    to such as \\computername\share\ and this path location is held in the software. What I need to find out is when the slave computers create the file in the share location how long does it 'reserve' that connection? does it release it straight away or does
    it hold the connection for sometime before releasing it for another 'concurrent' connection. 

    You can use this command netstat -ano 
    and determine the number of active connections. 
    For SQL specific queries, you can post the same in SQL forums. The above is applicable to shares. 
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • I wonder why i cant use the service of iMessage for mac

    I downloaded ios mountain lion, but i cannot send any messages by using iMessage for Mac, i don't know why.

    iMessage or Messages? iMessage was the beta-test version. Messages is the production version for Mountain Lion.
    "cannot send any messages" is a bit vague. What did you try, and what happened?

  • Report for Good's Entry /Service Entry Pending for Material's/Service's

    Dear Folks,
    I would like to have report for the Invoices Pending of  order's by Service Entry /Good's Entry .
    Please share the T.Code to suppose the Same?
    Thanks,
    Peer Mohamed

    There is no standard report available in SAP. you will need to develop a custom report for your requirement.

  • I have a question for the Adobe customer service dept., not for the "community" as a whole!

    I have a question for the Adobe Customer Serice Dept., not the "community" as a whole. And I expect an answer! I want to know why I am expected to sign up for another service package when I just paid $25+ yesterday to be able to convert files back and forth from a PDF to a Word file and then back to a PDF. What kind of rip-off is this?

    Hi,
    I am very sorry that you had unpleasant experiences with our customer service.
    If you would like to export your PDF files to MS Word files then ExportPDF tool will do the job.
    If you would like to convert MS Word files to PDF then ConvertPDF tool will the the job.
    If you would like to export your PDF files to Word file then convert the Word files back to PDF then PDF Pack service is required which includes ExportPDF/Convert to PDF/Combine Files tools.
    Please let me know if you have any questions/issues.
    Thank you.
    Hisami

  • I am constantly having to change my ID and password every time that I open up an application. I use this mini mac, and an I-pad for personal use and an I-pad for work. Any suggestions?

    I constantly am asked to change my password and apple ID every time that I open up a different application. In fact the old ID keeps popping up as my ID. Any suggestions how I can get this fixed once and for all?

    Please post the complete, verbatim text of the message, or a screenshot.

  • Cisco Jabber for Telepresence 4.6.3 Setting for "Webex Telepresence" Cloud Service

    I am looking for the server setting that can be installed into the Cisco Jabber for Telepresence Client (MOVI) that will allow it to connect to the "Webex Telepresence" cloud service.  I cannot find a download anywhere that has the infomation re-configured for the "Webex Telepresence" service.
    Thanks for your help in advance
    Tim
    Well after a few hours of searching i have the Answer
    The Client can be downloaded from: http://download.telepresence.webex.com/MCX/4.6.3.17194/WIN/JabberVideo_4.6.3GA.exe
    This will come with the following setting pre-configured: Sign-in Setting > Internal Server: https://boot.telepresence.webex.com/tmsagent/api/rest/devices/movi/provisioning
    If you have the JabberVideo Client installed and just want to change where it gets provisioned from VCS or Webex Telepresence then you should be able to use your current client and just change the internal server settings and clear the external setting.
    Then you will need to use your Webex Telepresence Login ID and Password.
    Hope this helps Someone.
    Tim
    Message was edited by: Timothy Shire

    A1: Because it can use either (webex or CUPS), there are two deployment modes, all is on the documentation if you haven't gone thru it.
    You type in what it's asking, nothing more. Choose one, and then use the CUPS hostname, DNS is basically mandatory, the PC needs name resolution for all you have configured (VM/CUCM/etc)
    A2: No, it can be IM&P, full UC and phone mode. No, Full UC and phone mode use the PC for media termination, deskphone control uses the phone for media. Did you change the parameters during install for phone mode??? If not, it's not in phone mode.
    A3: No, that can be many things, DNS, connectivity, credentials, etc
    You mention DNS is not used, so, most likely that's the problem.
    I'd strongly recommend you to review the whole deployment guide for Jabber for Windows.
    HTH
    java
    if this helps, please rate
    www.cisco.com/go/pdihelpdesk

  • PR for Components from CS

    Is it Possible to create PR from IW32 for components.
    Now it is creating for operations. Using sm02 screen.
    What about Components If we want to procure without F account assignment.

    Check the following config.
    IMG => PM & CS => Maintenance & Service Processing => Maintenance & Service Orders => General Data => Define Account assignment for PR
    In this, it has been mentioned as F. So change according to your requirement.

  • Unable to activate after Service Pack 2 for Microsoft Office 2010 (KB2687455) is deployed

    I'm having a very strange issue with deploying the "Service Pack 2 for Microsoft Office 2010 (KB2687455)". Here's what I see:
    Deploying to a Windows 7 SP1 system fully patched as of 7/29/2013
    Using SCCM 2007 R3
    Task Sequence installs Office Professional Plus 2010
    Task Sequence installs Service Pack 2 for Microsoft Office 2010 (KB2687455)
    The Office Professional Plus 2010 install was configured to use our key using the Office Custimization Tool (setup.exe /admin)
    When I try to activate the suite using any of the installed applications (word, excel, outlook or powepoint) I get the error "An unspecified error has occurred. Your request cannot be processed at this time. Please try again later. (0x80070190)"
    If I repair the install then try the activation again it works right away. This is a good work around for single installs but for my needs of multiple system deployment and for pushing out the Service Pack 2 for Microsoft Office 2010 (KB2687455) to other systems
    in my environment this will not work.
    Can anyone please suggest a solution to this problem?
    Thank you,

    Hi
    According to my research, this issue occurs when one of the following conditions are true:
    If you have CD emulation software installed, a registry key is preventing the hardware ID from being acquired.
    A required registry key is not set correctly or is missing.
    If you want more detailed information, please refer to the following link:
    http://support.microsoft.com/kb/2400124/en-us
    Hope it helps
    Regards

  • Remote Connection using Back to my Mac for Time Capsule?

    How do I connect to my Time Capsule and connected usb drive/printer now that Back to my Mac for Mobile Me is disabled and iCloud is running Back to my Mac?
    More information:
    I used to use the Mobile Me's version of Back to my Mac to enable connecting with my time Capsule, but how is this done now that iCloud has taken over Back to my Mac and I have upgraded to Lion.
    I have a Feb2011 MBP and a 2010 minimac the macmini is always connected to the time capsule, but I would like to be able to connect directly to the time capsule without having to go through the macmini.
    Thank you for your help

    It is possible but I am not sure it is worth the hassle..
    Your key issue here is public IP for your network.. if you have a static ip you are fine.. but very few people have this. It also depends on how the TC is setup.. is it the main router for the network or plugged into a modem router which has the role of main router, even if you use the TC as a secondary router.
    Without more info..
    1. This is easy if you have a static public IP and the TC is the main router and gets the public IP on the wan port.. just go to disk sharing in the airport utility manual setup and check for wan (internet access).
    2. If you have a dynamic IP, then you will have to sort out how you are going to find that IP.. the normal method to use dyndns account is not directly applicable because the TC has no client. It is possible to set up dyn dns but you will need to purchase your own domain name.
    3. You may find it easier to use standard router and bridge the TC. A standard router can be setup to port forward 548 AFP files service to the TC ip address. You may or maynot be able to access the printer. Certainly would be easier if the printer has IPP services. And is a true network printer.
    4. Use vpn.. get a vpn router so you can setup proper vpn endpoints.. then you use VPN service to access your local network.. this is far more secure and will work with dyndns just fine.

Maybe you are looking for