Look for files with different names

Do we have any utility or command in solaris 8 where we can check for files in two folders with different names and display them somewhere? Manual search for such files becomes very difficult when there are a large number of files in the folders. Please suggest.

Check with an Unix forum like http://www.unix.com

Similar Messages

Batch Rename Multiple files with different names

Hi,
Is there any way to batch rename multiple files with individual names? I.e
IMG_123 changed to RSP45AS
IMG_124 changed to MOL157A
IMG_125 changed to AGKH135
IMG_126 changed to MNOLH13
IMG_127 changed to ASFBLUG
Etc.
Are they any programs or scripts or plug ins that would do that job?
Thanks

HI there Onemorewave,
It looks like there is a batch remname feature included in OS X 10.10 Yosimte if you are planing on updating.
Rename files, folders, and disks - Mac Help
Rename multiple items
Select the items, then Control-click one of them.
In the shortcut menu, select Rename Items.
In the pop-up menu below Rename Folder Items, choose to replace text in the names, add text to the names, or change the name format.
Replace text: Enter the text you want to remove in the Find field, then enter the text you want to add in the “Replace with” field.
Add text: Enter the text to you want to add in the field, then choose to add the text before or after the current name.
Format: Choose a name format for the files, then choose to put the index, counter, or date before or after the name. Enter a name in the Custom Format field, then enter the number you want to start with.
Click Rename.
Note: To batch rename, you would want to choose the "Format" option.
-Griff W

Search multiple folders for files with same name and create single file

I have a project where I need to search multiple folders for a file name and when found append data from each file to a single input file.
Example
root folder to start search
\\servera\sales
\\servera\it\salesa\cmmstr.txt
\\servera\it\salesb\cmmstr.txt
\\servera\it\salesc\cmmstr.txt
I need to create a a single cmmstr.txt on the root folder. I would like it to be able to run this with parms to pass in folders to search and file names to search and single file name to create. I'm going to have a least 10 differnt files to
search for and create output file for. The folders to search
will somewhat be static.
Thanks.

I tested this out on my own seat and I think it should work for you. I wrote it as a function, all you have to do is pass the root folders you want to search and the file your looking for. The function will then search that directory and all sub directories
for that file name. you will also have to provide it a file to append to, if the file dosen't exists the function will create it. If you run into an issues let me know and the links Mike
Laughlin posted are a great resource.
Function Search-Files{
Param([String[]]$Locations, $SearchFor, $AppendTo)
Begin
If(-Not (Test-Path $AppendTo)){New-Item $AppendTo -ItemType File -Force}
Process
ForEach($Location in $Locations)
$Files = Get-ChildItem -Path $Location -Filter $SearchFor -Recurse
ForEach($File in $Files)
Get-Content -Path $FIles.FullName | Out-File $AppendTo -Append
End{}
Search-Files -Locations "\\Server1\c$\Temp", "\\Server1\c$\Test1" -SearchFor "Install.cmd" -AppendTo "C:\Temp\Search.log"

Picking file with different names

Hi Experts,
I am doing file to file scenario without IR.I am just picking up the files from sap appl server and placing in third party server.
my question is i having ten files different names.so i haev to pick up all the files.i can not put the * in file name scheme as it has different file in the same folder which should not picked ip.
so how is is possible in file adapter do i need to create 10 different channels for 10 different file or any other way is there.
Thanks,
Bhaskar

Hi,
If you dont want any file to be picked by sender file adapter use the Exclusion mask in it.
Go to advance selection for source file
Refer http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
Regards
suraj
Edited by: S.R.Suraj on Aug 11, 2009 6:34 AM

Creating Multiple Files with different name at Receiver side

Gurus -
Can anybd tell me how to generate multiple files at the Receiver side in the given target directory with different file names?
One source message will contain number "N" using which we have to generate files "N" number of times at the Receiver side.
Kindly help.

hi,
are you following this blog?
provided you have SP>14 and no IDOC/HTTP involved.
and have you got the error you mentioned when testing with sample payload?
from where did you take the payload? if is from SXMB_MONI make sure you dont have <MESSAGE> tags in the payload,generally systems adds <MESSAGE> tags when you do multi mapping.
get the payload from SXMB_MONI right click ->view source payload(this is raw data) and test it.
it should be ok now.
and refer my discussion in the thread ,as I got he same error.
Split mapping created no messages -Mluti Mapping

Problem saving files with different name with DFS installed

I have a server that I have DFS installed and running on. This appears to work fine. There is one problem that I have encountered though:
On a share I have a folder that is not inheriting rights from it parent object. This works fine with DFS. When I create a new word document and try to save it in this folder with a different name other than the default (doc1.doc) I get an error saying that the user doesn't have permission, but I can save it as the default name of doc1.doc. I can then re-name the file to what I want from windows explorer, open it up in word, work on it and save it again. Even with the new file name I can't do a save-as and save it as a different file.
All the other folders under the share that inherit rights from the parent folder work.
eg save-as in \\server\share\folder or below works
save-as it in \\server\share\no_inheritance or below does not work
Anyone have any ideas?

Originally Posted by ndean
I have a server that I have DFS installed and running on. This appears to work fine. There is one problem that I have encountered though:
On a share I have a folder that is not inheriting rights from it parent object. This works fine with DFS. When I create a new word document and try to save it in this folder with a different name other than the default (doc1.doc) I get an error saying that the user doesn't have permission, but I can save it as the default name of doc1.doc. I can then re-name the file to what I want from windows explorer, open it up in word, work on it and save it again. Even with the new file name I can't do a save-as and save it as a different file.
All the other folders under the share that inherit rights from the parent folder work.
eg save-as in \\server\share\folder or below works
save-as it in \\server\share\no_inheritance or below does not work
Anyone have any ideas?
I have the same problem... how did you solve it?
Thanks!
Andres, Blogger

Trace file with different name is alert log file.

I am strange today
i found a trace file generated in alert log file with name
/bdump/stlbas_cjq0_1880.trc:
but when i am trying to find out in bdump folder i cannot found
any file with this named. instead i found /bdump/stlbas_cjq0_1853.trc
is there any possibility of being this scenario ?
database version:- 10.2.0.4
Os:- sun solaries spark 64 bits
Regards
Halim

The trace file has been removed/deleted from an OS user. I think you should verify that with OS logs.
Thanks

How to deploy ear file with jar file and war file with different names

Hi,
As part of weblogic migration from WL 6.1 sp3 to WL 10, Iam facing some problem.
Problem:
I have one ear file(abc.ear) to deploy which contains one jar file(xyz.jar) and one war file(pqr.war).
In config.xml file of WL 6.1, it was mentioned as :
<Application Deployed="true" Name="abc" Path="./config/mydomain/applications/abc.ear">
<EJBComponent Name="xyz" Targets="myserver" URI="xyz.jar"/>
<WebAppComponent Name="pqr" Targets="myserver" URI="pqr.war"/>
</Application>.
The above is working fine.
But in config.xml file WL10,I cannot mention the same.
I need to have different application anmes for ear,jar and war.If I deploy as a ear file,the jar and war files are deployed with the same ear file name.
I tried the following options:
1) Deploying as a ear file by adding <sub-deployments>
2) Deploying both war and jar seperately which is not recommended in my application.
Please provide the content I should place in the config.xml so that everything works fine correctly.
Any help is appreciated.

Hi,
As part of weblogic migration from WL 6.1 sp3 to WL 10, Iam facing some problem.
Problem:
I have one ear file(abc.ear) to deploy which contains one jar file(xyz.jar) and one war file(pqr.war).
In config.xml file of WL 6.1, it was mentioned as :
<Application Deployed="true" Name="abc" Path="./config/mydomain/applications/abc.ear">
<EJBComponent Name="xyz" Targets="myserver" URI="xyz.jar"/>
<WebAppComponent Name="pqr" Targets="myserver" URI="pqr.war"/>
</Application>.
The above is working fine.
But in config.xml file WL10,I cannot mention the same.
I need to have different application anmes for ear,jar and war.If I deploy as a ear file,the jar and war files are deployed with the same ear file name.
I tried the following options:
1) Deploying as a ear file by adding <sub-deployments>
2) Deploying both war and jar seperately which is not recommended in my application.
Please provide the content I should place in the config.xml so that everything works fine correctly.
Any help is appreciated.

Create .exe that sends results to .txt, keeps looking for folder with .exe name

Created a project that logs the results to a .txt file that was setup in "Source File Settings" as a subfolder "Test Results", but when I run the .exe it trys to write the results to a folder with the same name as my .exe file. I must have something set up wrong under my Build properties.
Thanks Chuck

Even though this knowledgebase's question does not address your question directly, it does expand on what Dennis said about the path being different between the development system and the executable. And how the it adds another layer in the executable.
The part that is most useful to you is this:
" Consider a VI named Application.vi located in the hard drive's root directory (e.g. C:\). In the LabVIEW development environment, the Current VI's Path function returns:
C:\Application.vi
Now consider the same VI built into a stand-alone application named MyApplication.exe. When running, the Current VI's Path function returns:
C:\MyApplication.exe\Application.vi
Therefore,
when you have an executable, you must strip the path twice to get to
the owning directory. To write a VI which will return the current
directory both as a VI and after being built into a stand-alone
application, use LabVIEW's Application Kind or Application Name properties to determine in which environment the VI is running. "
Hope this helps!
Warm regards,
Karunya R
National Instruments
Applications Engineer

To create multiple files with same content but with different names

Hi SapAll.
here i have got a tricky situation on Idoc to File Scenario.
in my interface of an Idoc to file ,there is requirement to create multiple files with different file names but with same content based on one Idoc Segment.
which means there will be one Zsegment with two fields in the idoc,where one field with (content refers to the name which file name should start with .so lets say if this segment is repeated for 3 times then PI should create 3 files in the same directory with same content but with different file names (from the filed).
so here for now iam using one reciever file communication channel.
can any body give me the quick answer.
regards.
Varma

What do you mean by different names?
when i make proper setting in the Receiver Channel....on how to create the filename (what to append) like add Timestamp, counter, date, messageid.....even in this case you will ahve file with different names and that too from same File channel.
You can perform multi-mapping in XI/ PI and then your File channel will place the files in the target folder with relevant names. You cannot use Dynamic Configuration with Multi-Mapping!
If you intend to use different File channels, then do the configuration as required (normal)...even over here you can follow multi-mapping.
Do not use a BPM!
Regards,
Abhishek.

Scheduling SQL AGENT JOB for SSAS DataBase to take backup files Daily with Different Names

Hi All,
I am working with SSMS. I have Analysis Services DataBase.
i want to Schedule a SQL SERVER AGENT JOB.
I want to take that AS DB BackUp Daily and has to be stored in Same
Folder/same path in my local
machiene with Different Names.
Means, There should be Daily BackUps Files in that Path. According to that we have to Schedule the JOB.
Can anyone help me for this..
Thanks,
Supraja.

Hi Katherine,
Thanks a lot for your Response. what
you have posted is very useful for me.
But i am searching the result using AS
DataBase BackUp Script.
i found one of the easy way. its working for me.
Please check the below link for your reference..
http://dbatasks.blogspot.in/2012/08/taking-backup-of-ssas-database.html
Thanks,
Supraja.

Can't import RAW and psd file with same name different extension

Trying to import a folder of images from desktop that I have been working with in Bridge CS3.
LR won't import a RAW file that has a PSD file by the same name. Tried renaming the PSD and deleting the one with the same name, but says it is still there and won't import the RAW file - What is the correct workaround on this? Why can't it import same name files with different extensions?

A forum search for 'RAW + JPEG' will give you more posts on this than you care to read. This will change. For now, import the RAW and PSD's from separate folders and then move them together for within LR.
LR is seeing the RAW as a sidecar to the PSD. It is an unforseen effect of the RAW + JPEG thing where they decided to not import the JPEG, seeing it as basically a preview image for the RAW.
LOL
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/

How to check-in multiple files with same name having different revision num

Hi
Can anyone please tell me, how to check-in multiple files with the same name with different revision number using RIDC API.
For eg:
First I will check-in a file(TestFile.txt) into a content server with revision number 1 using RIDC API in ADF application. Then after some time, will modify the same file(TestFile.txt) and check-in again. I tried to check-in same file multiple times, however first time its checking-in correctly into server showing revision as 1, while checking-in same file again, its not giving any errror message, and also its not reflecting in server. Only one file(TestFile.txt) is reflecting in server.
How to implement this functinality using RIDC API? Any suggestions would be helpful.
Regards
Raj
Edited by: 887680 on Mar 6, 2013 10:48 AM

Hi Srinath
Thanks for your response. Its not cloning, its like check-in file first, then check-out the file and do some editing and then again upload the same file with different revision number using RIDC. I got the solution now.
Regards
Raj

Hi All, I am using iphone in UAE and ipad in India usinging same apple id. Earlier I could do imessage to my Ipad with different name but with software update,I am unable to do, as signing id for the iphone and ipad is same.How to restore back

Hi All, I am using iphone in UAE and ipad in India usinging same apple id. Earlier I could do imessage to my Ipad with different name but with software update,I am unable to do, as signing id for the iphone and ipad is same.How to restore back

I believe because you migrated from a Nokia to an iPhone you need to register the Bn phone number with your Apple ID so it can be used for iMessage. The Pn number seems to be the only one registered
Go here > https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Manage your Apple ID and see if that does the trick
Hope that helps

Spotlight/Finder can't find a file, yet when I search the timecapsule for they find it. If I try to restore the file I get "file with that name already exists...." What is wrong?

I was trying to find a file (iTunes Backup). When using finder/Spotlight they couldn't find the file.
I then opened up my timecapsule and searched for the file....tick-a-de-da it found it in yesterdays backup. I attempted to restore the file and got the prompt "A file with that name already exists in this location, would you like to keep both, replace the file or cancel the request.
So if the file is there why can't spotlight/finder find the file??
If it helps I get this from the terminal when checking if indexing was enabled.
$ mdutil -s -a
Indexing enabled.
/Volumes/Data:
2014-11-18 18:09:39.542 mdutil[1472:572531] Metadata.framework [Error]: mdsCopyStoreAttributes failed: (8) (os/kern) no access
No index.
/Volumes/Time Machine Backups:
Indexing and searching disabled.
/Volumes/Time Machine Backups/Backups.backupdb:
Indexing enabled.

Hi Danielle,
Is there any possibilty that some of your files (a VI or DLL?) have been moved, renamed, or deleted? Also, what version of LabVIEW are you using and are you using any .NET DLLs? Another option to consider would involve VISA or DAQmx property nodes. Are you using any of these property nodes in your code? Here is a KnowledgeBase article to describe more about the VISA and DAQmx property nodes in a source distribution:
Error Creating Source Distributions Involving rc Files: http://digital.ni.com/public.nsf/allkb/833BFD5E9CA0224886257584004DAA4C?OpenDocument
I hope this is able to help.
Anna L
Applications Engineer
National Instruments

Look for files with different names

Similar Messages

Maybe you are looking for