Look in Selector Default for Record Types

Is it possible to set a Look in Selector Default for each record type? For example, I'd like the Look in Selector default for account, contact, and opportunity to be defaulted to All but the Look in Selector default for Custom Object 1 to default to a specifc book we defined. I know that I can set the default look in selector for a given user but not sure if it can be set for a specific record type.

At this time it is not possible to set the Look in Selector by record type.

Similar Messages

Workflow for record type = User

Hi All,
I would like to create an WF for record type = 'User' that will update one 'User' object field based on the value entered in other 'User' object field.
Simple to do for any record type except 'User' which is not an option in the Workflow Rule New record type LOV, any ideas for an workaround here?
10x,
AlexD.

Hi Alex, unfortunately I have no answer, but I´m looking for something similar. I want to link object fields of the user´s direct manager to the appropriate object fields of the user. I don´t wanna save the values via a workflow, as the value should be dynamic if it changes in the user profile of the manager.
If this could be combined with a dynamic user layout for the administrator it would enable perfect user management. Does anyone have an idea? Many thanks, Joerg

Howto post offsetting entries for Record type Z Line items in KE24 from FI

HI,
We are facing one problem for order created from CRM.
Firstly this order has created with one profit center ( ex PH50293 ) they have posted some plan values and released the order in CRM so values flown to ECC and available in KE24 .
After some time , we have changed profit center for this order in CRM by changing service organisation and release the order after that we have posted some values in that order which is not flown to ECC becuase of different profit center
Later we rejected the all values and make balance zero in CRM , But still values are appearing in KE24 and there is inconsistency of profit center between ECC & CRM.
Now want to make the balances zero in KE24 for that order. but it shows record type Z ,
So , now how we can rectify this and how we can make balances zero
__Note : as per present setting in the system, we can not change the profit center in CRM once order released_._
Thanks & Regards
Gupta

Dear VK,
I guess, the only option would be to post manual correction thru KE21N, with negative values for record type Z.
Trust this helps.
Cheers.

Field for Record Type

Hi All,
          I have to show one output in ALV.One of the o/p fields is "Record Type" which has possible entries as 1.Current Stock 2. Safety Stock 3. Process Order 4.Planned Order.
Is there any field in any table for record type with above mentioned possible entries.Even if a field for Order type is there please mention.
Thanks in Advance,
Saket.

Hi
Please check this
/BI0/OIRECORDTP                Record type
CFRECTY                        Record type
FE_RRCTY                       Record type
MAFID                          Record type
P106_RTYPE                     Record type
PAR_TIREG                      Record type
PES_190TIP                     Record type
PPT_TSREC                      Record type
RECNO                          Record type
RECTP_EBES                     Record type
RSART                          Record type
SISATZ                         Record type
VVISATZA                       Record type

Grants for Record Type

Hi all,
can any one plzz tell me how to give grants for Record or Table type.
Thanks in Advance

If you want more help then do the following:
1. Post your complete Oracle version number ... minimum 3 decimal places.
2. Post the full and complete error message ... not your interpretation of it.
3. Post the DDL for the type or at least those portions of it that refer to other objects that may not exist in the same schema.
You have made this far harder than it need be by asking an initial question that concealed relevant facts and then posting again the ORA-01031 but not providing sufficient information.
If you want people to help you then provide the necessarily information.

Output Server & "Read Ahead" for record type indicator files

I have a design requirement where I need to read to the end of the print file (record type indicator format) before I can complete the process of laying down the subforms. I need to lay down a subform on page one, but will not get the data element needed until the end of the file. It is a bill statement with line items listings. When run in a batch it can have single page and multi-page bills combined. I have heard of "read ahead" but don't seem to find any documentation on it. Can anyone verify this function and direct me where to find more information?
Thanks, Philip

One solution might be to add a preprocessing step before the merging. Use the transformation agent to extract the "data at the end", inserting it at the beginning. When jfmerge starts, the data is good as gold, and no jumping required. In my experience, Output Server isn't that good at jumping back and forth.
Hope this helps,
Vegard

GR/GI slip print option to be set as default for movement type 311

HI,
I am required to do transfer posting by using tcode MIGO . In this the slip(GR/GI) print indicator is currently not checked . I need to check it every time to get the print .
PLease tell me how can i set this option to be always set as checked as default setting . I need to do this movement type 311 specific.
Waiting for your reply
Thanks
Rohit Chavan

Hi
If you are looking at having the print checkbox selected automatically when you goto MIGO, set the parameter ID NDR in your user master record as X.
Regards
Prasad

Using X11 application as default for file type?

Hello,
I wanted to know if it's possible to set an X11 application as default application to open a certain file type.
I tried the "open with" option on a file type, but the X11 application I wanted to associate to was unavailable (impossible to select) in the file explorer window.
Thanks.
-- Paolo

Unix executables are not usually "visible." "Standard" OS X applications use the ".app" extension, but Unix executables do not. I suspect that's why you are having the problem. Making the association through OS X may not be possible.

Set default value for product type

I want to set default value in product type drop down box
in component PRD01QR.
view SearchHelp.
I tried with setter and getter , but not working
they are using query string.

Hi,
You can achieve this by redefining the method GET_VH_PRODUCT_TYPE() in IMPL class of searchHelp view. Just copy paste the implementation of this method from super class and now control the internal table as per your requirement like
comment out the line APPEND INITIAL LINE TO lt_ddlb. (line no: 47)
as it will add an empty line at the starting of internal of product type values which you dont want. In you case there should be some default value for product type field, so arrange the inetrnal table values according to you requirement and what ever value you want to default for product type that should be the first value in the drop down without empty line and add an empty line at the end of the internal table.
No need to call super->GET_VH_PRODUCT_TYPE() in your implementation as you have written all the required code in your implemenation itself.
Hope this would help you!
Regards,
Ajay

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

Search for records in the event viewer after the last run (not the entire event log), remove duplicate - Output Logon type for a specific OU users

Hi,
The following code works perfectly for me and give me a list of users for a specific OU and their respective logon types :-
$logFile = 'c:\test\test.txt'
$_myOU = "OU=ABC,dc=contosso,DC=com"
# LogonType as per technet
$_logontype = @{
2 = "Interactive"
3 = "Network"
4 = "Batch"
5 = "Service"
7 = "Unlock"
8 = "NetworkCleartext"
9 = "NewCredentials"
10 = "RemoteInteractive"
11 = "CachedInteractive"
Get-WinEvent -FilterXml "<QueryList><Query Id=""0"" Path=""Security""><Select Path=""Security"">*[System[(EventID=4624)]]</Select><Suppress Path=""Security"">*[EventData[Data[@Name=""SubjectLogonId""]=""0x0""
or Data[@Name=""TargetDomainName""]=""NT AUTHORITY"" or Data[@Name=""TargetDomainName""]=""Window Manager""]]</Suppress></Query></QueryList>" -ComputerName
"XYZ" | ForEach-Object {
#TargetUserSid
$_cur_OU = ([ADSI]"LDAP://<SID=$(($_.Properties[4]).Value.Value)>").distinguishedName
If ( $_cur_OU -like "*$_myOU" ) {
$_cur_OU
#LogonType
$_logontype[ [int] $_.Properties[8].Value ]
#Time-created
$_.TimeCreated
$_.Properties[18].Value
} >> $logFile
I am able to pipe the results to a file however, I would like to convert it to CSV/HTML When i try "convertto-HTML"
function it converts certain values . Also,
a) I would like to remove duplicate entries when the script runs only for that execution.
b) When the script is run, we may be able to search for records after the last run and not search in the same
records that we have looked into before.
PLEASE HELP !

If you just want to look for the new events since the last run, I suggest to record the EventRecordID of the last event you parsed and use it as a reference in your filter. For example:
<QueryList>
<Query Id="0" Path="Security">
<Select Path="Security">*[System[(EventID=4624 and
EventRecordID>46452302)]]</Select>
<Suppress Path="Security">*[EventData[Data[@Name="SubjectLogonId"]="0x0" or Data[@Name="TargetDomainName"]="NT AUTHORITY" or Data[@Name="TargetDomainName"]="Window Manager"]]</Suppress>
</Query>
</QueryList>
That's this logic that the Server Manager of Windows Serve 2012 is using to save time, CPU and bandwidth. The problem is how to get that number and provide it to your next run. You can store in a file and read it at the beginning. If not found, you
can go through the all event list.
Let's say you store it in a simple text file, ref.txt
1234
At the beginning just read it.
Try {
$_intMyRef = [int] (Get-Content .\ref.txt)
Catch {
Write-Host "The reference EventRecordID cannot be found." -ForegroundColor Red
$_intMyRef = 0
This is very lazy check. You can do a proper parsing etc... That's a quick dirty way. If I can read
it and parse it as an integer, I use it. Else, I just set it to 0 meaning I'll collect all info.
Then include it in your filter. You Get-WinEvent becomes:
Get-WinEvent -FilterXml "<QueryList><Query Id=""0"" Path=""Security""><Select Path=""Security"">*[System[(EventID=4624 and EventRecordID>$_intMyRef)]]</Select><Suppress Path=""Security"">*[EventData[Data[@Name=""SubjectLogonId""]=""0x0"" or Data[@Name=""TargetDomainName""]=""NT AUTHORITY"" or Data[@Name=""TargetDomainName""]=""Window Manager""]]</Suppress></Query></QueryList>"
At the end of your script, store the last value you got into your ref.txt file. So you can for example get that info in the loop. Like:
$Result += $LogonRecord
$_intLastId = $Event.RecordId
And at the end:
Write-Output $_intLastId | Out-File .\ref.txt
Then next time you run it, it is just scanning the delta. Note that I prefer this versus the date filter in case of the machine wasn't active for long or in case of time sync issue which can sometimes mess up with the date based filters.
If you want to go for a date filtering, do it at the Get-WinEvent level, not in the Where-Object. If the query is local, it doesn't change much. But in remote system, it does the filter on the remote side therefore you're saving time and resources on your
side. So for example for the last 30 days, and if you want to use the XMLFilter parameter, you can use:
<QueryList>
<Query Id="0" Path="Security">
<Select Path="Security">*[System[TimeCreated[timediff(@SystemTime) <= 2592000000]]]</Select>
</Query>
</QueryList>
Then you can combine it, etc...
PS, I used the confusing underscores because I like it ;)
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

MESSAGE TYPE DEFAULT FOR PURCHASE ORDER

Dear All,
I want to set default message type ZNEU for all purchase order. I try this with T-CODE MN04 AND MN05 but it is not working.
SO HOW I MAKE MESSAGE TYPE DEFAULT FOR PURCHASE ORDER
Regards,
Pankaj

Hi,
Miantain the all the conditions records in t.code : MN04. after that check for the "Define Partner Roles for Purchase Orde" what did you mentioned for new or change as per that,
Check you had fine tune the output (message) type in following path:
SPROMMPurchasingMessageOutput controlMessage tyoesDefine message type for Purchase Order--Fine-Tuned Control: Purchase Order
Select the check box coresponding to your output(message) type ZNEU to have print output for this message type .......
Now try creating PO & u will have default message type ZNEU......
Hope this will help you.......
BR,
Patil

Where can I find the user key precedence hierarchy for each record type?

Example: I want to update contact records through the CRMOD web service API.
So I'm looking at the "Oracle Web Services On Demand Guide, Version 6.0 (released August 2010)", page 316, and it lists 3 user keys for Contact.wsdl v2.0 in the following order:
1. FirstName and LastName
2. Id
3. ExternalSystemId
From what I can see, this order does not seem to reflect the precedence hierarchy of these 3 user keys.
I've send in a test update where I supplied a FN, LN, and EUID, ... and the contact that matched the EUID got updated.
(I'm glad it did, because EUID really needs to take precedence over FN+LN, otherwise you could never change a contact's last name without knowing the contact's Row Id.)
Does anyone know where I can find the precedence hierarchy for each record type's user keys (other than doing the obvious and time consuming "try+error")?

Hi,
we experienced similar problems with the account object and asked the oracle support about this. This was their answer:
"[...] thank you for contacting CRM On Demand Customer Care. Regarding your question, please note the below: when perfoming a query, the user key fields are looked for in this order: - Row id - External System Id - AccountName and Location. Basically, the search will be performed by AccountName and Location only when the other fields are missing. This is an expected behavior because, the Row Id is the strongest filter as it is always unique. The external system Id comes second, as it is supposed to be unique in another system."
So, I guess the order is always
1) Row Id
2) External System Id
3) specific field combinations...
kind regards
Kai
Edited by: Kai Hartmann on 28.04.2011 07:10

Pdf/a for default "save as type"

Hello
I have one question about setting default save as type.
I get images from scanner, after that I go to "Save as" and I select location, tipe in name of pdf and choose save as type. Under default setting *.pdf is selected but I want to use *.pdf/a as default format for new pdfs.
Is there any option to make it default save format?

I don`t know if you understand me. When I go to »Save as type« I want to have pdf/a option as default option. I don`t want to change it ewerytime I want to save new document.
Please, take a look at pictures..

Default mode for recording in Captivate 4

I've created a template for recording simulations in Captivate 4, but it seems to be recording in Demo mode, and not creating click boxes, failure captions, etc. How do I set it to default to Training Simulation?
Thanks for any suggestions...

Hi there
Unfortunately there is no way I'm aware of to force a default for this. The Captivate author must choose the type of recording at the time the recording occurs.
Click image below for possibly larger view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Look in Selector Default for Record Types

Similar Messages

Maybe you are looking for