Look-up error after Upgrade

Hi,
The R/3 system in our project was upgraded from 4.6 c to ECC 6. After the upgrade we are facing issues with the lmapping look -up.
We have used RFC channel to do look up and and java codes which calls the RFC and dose parsing.
Right now after upgrade , there is no error in the channel ...but the XI is not able to do retrive value from the new system.
for the values it says , it does not exsist in the look-up table, although that is not true, the values are there in the system.
can you advice what went wrong and what steps should i take .
Thanks.

Did you checked that RFC is working fine in R/3 itself and try to post the same request and check
other options can be debugging by setting external break point
If above wont works check the roles if any required for executing RFC remotely
Rajesh

Similar Messages

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.

Arghhhhhhhhhhhhhhhhhhh!!!!!!
After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive. But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
Words, almost, fail me.

Flash 9,0,124,0 security error after upgrade

I get the following error after upgrading my Flash Player
(after my system prompted me to install it while running the Flash
editor):
Internet Explorer has blocked this site from using an ActiveX
control in an unsafe manner.
I have uninstalled and reinstalled the player from the
browser, about 5 times now and it continues to be a problem for IE.
Works ok in Firefox if I manually download the FF installer. Is
there a standalone installer for Vista/IE7 or am I forced to use
the ActiveX installer which seems to have issues?

Fix: Removed both (!?more than one?!) versions of flash
player in my Programs and Features dialog, then ran
uninstall_flash_player.exe, reset IE7 to factory spec, then
reinstalled Flash from ActiveX. Seems to be working now.

TS1277 "iPhoto was unable to connect to Photo Stream" error after upgrading to mountain lion

Has anyone gotten this error after upgrading to mountain lion on a computer that already had a user setup on it?
My iphoto was working with photostream and now it will not connect at all.
I ran fix disk permissions and once it showed up in iphoto, photostream was loading and then it disappeared again.
help!

FWIW I fixed mine when I realised I'd probably downloaded iPhoto using an AppleID from the App Store but logged into iCloud with a different AppleID. I deleted iPhoto and it's related files (but not the iPhoto Library) using CleanApp, entered the App Store with my usual AppleID and downloaded iPhoto again. Once the App Store, the downloaded iPhoto and iCloud logins were the same iPhoto Stream worked again.

Error after upgrade CRS 4.0.4SR1 to 4.0.5SR2

Hi,
I've got some errors after upgrading my CRS 4.0.4SR1 cluster to 4.0.5SR2.
First my publisher's status stay in "patch" status for near 2 days now. I'm not able to change anything in the configuration, i've got this message "Config Changes are not allowed during 'Patch' operation, which was started by '_ccbu_build' at 'Thu Apr 08 04:31:04 CEST 2010 '. Please try again after 'Patch' is complete."(ERREUR02.jpg). How can I change this status?
Then I've got errors in historical DB which is working but not on the publisher only on subscriber. How can I resynchronize this DB?
Thanks for your help.

Thanks Tammy for the reply
We already tried the suggested SAP Note couple of time without any luck.
Regards,
SJ

Error after upgrading from sap b1 pl 35 to pl 49

hello sap experts
iam getting the following error after upgrading from sap b1 pl 35 to pl 49 this error is coming if we have given round off or discount in the below cell
"Discount deviates from authorised ranges (sales oreder-discount%for document) [message 439-15] pls make it as soon as possible an i will be thankful to those guys .
regards
Jenny

Hello Jenny,
You may check by supreuser account first to see if you got the same error. If not, it probably just related to user authorization. If yes, it must be a bug.
Thanks,
Gordon

What can I do if I get an internal power error after upgrading to Windows 10?

QuestionWhat can I do if I get an internal power error after upgrading to Windows 10?
AnswerSome laptops with AMD graphics that upgraded to Windows 10 are showing blue screens with error messages regarding Internal_Power_Error. If you receive this error, try the procedure in this article.
First, you'll need to quickly set the boot options to Safe Mode:
1. Hold the Windows key and press 'R' to open the run box.
2. Type MSCONFIG, then press ENTER.
3. Select the BOOT tab.
4. Under BOOT OPTIONS, check Safe boot, then select Minimal.
5. Click Apply, then OK.
6. Click Restart. (If prompted, click Restart anyway.)
From Safe Mode disable the AMD Display Driver:
1. Hold the Windows key and press the 'X' key to open a menu in the lower-left.
2. Click Device Manager.
3. Expand Display adapters to show the two display adapters.
4. Double click AMD Radeon R9 M200X Series.
5. Select the Driver tab.
6. Click Disable, then click Yes to confirm.
7. Click Close.
8. Hold the Windows key and press the 'R' key to open the run box.
9. Type MSCONFIG, then press ENTER.
10. Select the BOOT tab.
11. Uncheck Safe boot.
12. Click Apply, then OK.
13. Click Restart. (If prompted, click Restart anyway.)
From Windows 10 started with the AMD Display Driver disabled:
1. Hold the Windows key and press the 'X' key to open a menu in the lower-left.
2. Click Device Manager.
3. Expand Display adapters to show the two display adapters.
4. Double click AMD Radeon R9 M200X Series.
5. Select the Driver tab.
6. Click Update Driver.
7. Click Search automatically for updated driver software.
8. An AMD driver should be found and installed.
The driver that originally caused this problem is AMD display driver version 15.200.1046.2 dated 7/15/2015.
The driver installed through this process might have an older date, such as 15.200.1055.0 dated 7/6/2015. That's okay.

I'm having the same problem. I got error message 21. I went to apple store. they are saying i have a hardware error. Really, my phone was working before the update. Asked me for $150 to get another one when I am due to get a new one and wanted to pass this one on to my child.
Help please,
I will be glad to go back to the older software update

Imac error after upgrade to 10.8.4

I received an error after upgrade tp brand new imac. Error was upgrade was not installed. Upon reboot the version of SW in About thi Mac is 10.8.4. Bug?
iMac i7, 21.5" 16GB memory, fusion drive.
Thanks for input. I assume the upgrade took.

Verify Permissions gave me some errors, I deleted the repeats and the permissions fixed lines:
Repairing permissions for “Macintosh HD”
Warning: SUID file “System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig” has been modified and will not be repaired.
Warning: SUID file “usr/lib/sa/sadc” has been modified and will not be repaired.
Warning: SUID file “usr/bin/quota” has been modified and will not be repaired.
+++ (multiple repairs)
Permissions repair complete
I verfied the HD
Much text (removed)...
The volume Macintosh HD appears to be OK.
I also loaded the Apple downloads version of the upgarde and received the following (again):
The Installation failed
The insatllation encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
Message was edited by: Steve51K

Facing Parse Errors after upgrading database from 10g to 11g

Hi,
We are facing parse errors in the SQL's after upgrading database from 10g to 11g.
Kindly look into below parse errors.
********************************** Parse Error *****************************************************
Tue Aug 13 14:13:08 2013
kksSetBindType 16173533-2: parse err=1446 hd=3c73061fb8 flg=100476 cisid=173 sid=173 ciuid=173 uid=173
PARSE ERROR: ospid=15598, error=1446 for statement:
SELECT ROWID,ORGANIZATION_CODE,PADDED_CONCATENATED_SEGMENTS,PRIMARY_UOM_CODE,REVISION,SUBINVENTORY_CODE,TOTAL_QOH,NET,RSV,ATP,ORGANIZATION_NAME,ITEM_DESCRIPTION,INVENTORY_ITEM_ID,ORGANIZATION_ID,LOCATOR_ID,LOCATOR_TYPE,ITEM_LOCATOR_CONTROL,ITEM_LOT_CONTROL,ITEM_SERIAL_CONTROL FROM MTL_ONHAND_LOCATOR_V WHERE (INVENTORY_ITEM_ID=:1) and (ORGANIZATION_ID=:2) order by ORGANIZATION_CODE,SUBINVENTORY_CODE,REVISION, organization_code, padded_concatenated_segments
Tue Aug 13 14:13:10 2013
kksfbc 16173533: parse err=942 hd=3c387c4028 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
PARSE ERROR: ospid=29813, error=942 for statement:
Select feature from toad.toad_restrictions where user_name=USER or user_name in ( select ROLE from sys.session_roles)
kksfbc 16173533: parse err=942 hd=3c97d83648 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
PARSE ERROR: ospid=29813, error=942 for statement:
SELECT password
FROM SYS.USER$
WHERE 0=1
kksfbc 16173533: parse err=6550 hd=35185e4278 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
----- PL/SQL Stack -----
----- PL/SQL Call Stack -----
object      line object
handle    number name
319e277050        30 anonymous block
319e277050        57 anonymous block
PARSE ERROR: ospid=29813, error=6550 for statement:
BEGIN sys.dbms_profiler."146775420110782746251362632012"; END;
kksfbc 16173533: parse err=942 hd=3c142d8600 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
----- PL/SQL Stack -----
----- PL/SQL Call Stack -----
object      line object
handle    number name
319e277050        67 anonymous block
PARSE ERROR: ospid=29813, error=942 for statement:
SELECT 1 FROM plsql_profiler_data WHERE 0 = 1
Please help.
Regards
Suresh

Hi Suresh,
Apologies for misunderstanding..
Tue Aug 13 14:13:08 2013
kksSetBindType 16173533-2: parse err=1446 hd=3c73061fb8 flg=100476 cisid=173 sid=173 ciuid=173 uid=173
PARSE ERROR: ospid=15598, error=1446 for statement:
SELECT ROWID,ORGANIZATION_CODE,PADDED_CONCATENATED_SEGMENTS,PRIMARY_UOM_CODE,REVISION,SUBINVENTORY_CODE,TOTAL_QOH,NET,RSV,ATP,ORGANIZATION_NAME,ITEM_DESCRIPTION,INVENTORY_ITEM_ID,ORGANIZATION_ID,LOCATOR_ID,LOCATOR_TYPE,ITEM_LOCATOR_CONTROL,ITEM_LOT_CONTROL,ITEM_SERIAL_CONTROL FROM MTL_ONHAND_LOCATOR_V WHERE (INVENTORY_ITEM_ID=:1) and (ORGANIZATION_ID=:2) order by ORGANIZATION_CODE,SUBINVENTORY_CODE,REVISION, organization_code, padded_concatenated_segments
Assuming you see the above error message in the alert log file, which was your original post, follow the below steps:
1 Get the 'ospid' value from the error
2. Issue the below command:
SQL> select request_id,ORACLE_PROCESS_ID
2 from fnd_concurrent_requests
3 where request_id = 15598;
3. After obtaining the request_id
4, Query it from the front-end using SYSADMIN responsibility
Hopefully this should get you the respective concurrent report/program.
Thanks &
Best Regards,

Webdynpro error after upgrade NW04 to NW04s sp9

Hi,
I created some WD in NW04 using JDI. After upgrade to NW04s i got error messages in the program. The messages look like:
Error com.sap.tc.webdynpro.progmodel.api.IWDApplicationStateChangeInfo cannot be resolved (or is not a valid type) for the argument stateChangeInfo of the method wdDoApplicationStateChange LeaveReqComp.java OJL_TEST_Dpoczelfbedwebdynreqbelastingdienst.nl/gen_wdp/packages/nl/belastingdienst/zelfbed line 203
Hope somebody can help me solve my problem.
Kind regards,
Maarten.

Hi Maarten
I am also facing similar sort of problem when i am trying to import the local web dynpro DC into 2004s that was build n exported from 2004 and when i try to build it in 2004s i get error
com.sap.tc.webdynpro.progmodel.api.IWDApplicationStateChangeInfo cannot be resolved for the argument stateChangeInfo of the method wdDoApplicationStateChange
com.sap.tc.webdynpro.progmodel.api.IWDApplicationStateChangeReturn cannot be resolved for the argument stateChangeReturn of the method wdDoApplicationStateChange
were u able to solve the problem if yes please help me in that case
thanks !
Asif

Blackberry 9320 Error after upgrading app world, bbm, blackberry id

Hi,
I am a newbie and need some help here. I just bought a blackberry 9320 to replace my old 9700. After bought it, I upgrade the app world application to the newest version from app world website and bbm to bbm 7 from appworld app (9320 originally has bbm 6). When activated bbm, before running the bbm 7 it request to update blackberry id app to the newest. Then I managed to restore my bbm contact list through my blackberry id (previously I have bbm 7 on my 9700).
After upgrading then I did the pull battery to clear the memory (hard reset), but after put the battery back and my blackberry booting, it load until displayed "JVM error 517". What went wrong? JVM error 517 refer to hardware software conflict. I tried to hard reset again but the result still JVM error 517. Then I reload the software OS 7.1 downloaded from blackberry website (OS 7.1 for Telkomsel, wireless service provider in my country, Indonesia). And then I upgraded again my blackberry app world & bbm same as I did at the first time I bought 9320, did the hard reset, and JVM error 517 appear again.
Then I gave up and just reload the OS 7.1 without upgrading any app on my blackberry 9320 and I cannot restore my bbm contact list since it is stored with my blackberry id (bbm 6 doesn't has feature to restore through blackberry id and I never back up my bbm contact list.
Is there any way to restore my bbm contact list through blackberry id on bbm 6? Why after upgrading blackberry app world, bbm app from 6 to 7 and updating to the newest blackberry id app my blackberry went "JVM error 517"?
Please help me to solve this so i can do upgrading without having any JVM 517 error again or restore my bbm contact from blackberry id on bbm app 6.
Many thanks in advance.
Regards,
Stevanus Colonne
If want to thanks click "Like", if problem solved by this post then click "Solution" so others can find it

Hi Stevanuscolonne
Sorry to hear about your bad experience with your previous BlackBerry !
As a BlackBerry lover myself , I 'm glad you chosen BlackBerry again and Bold 9900 is indeed a good device . Its has a good processor and a huge internal memory and ofcourse some good features.
Regarding your Battery drainage problem, Generally this occurs when applications runs in the background , or because of any unknown Third party application installed within our device . A regular battery pull restart is always advised for our BlackBerry . If we press and hold the Menu for a few seconds, it will pop up a screen which will show all running programs in the background ,generally five will always there ( Home, BBM, Message,Phone , Browser ) we should always look if any other apps. are running.
Always try to Close Applications Correctly - Avoid using the End key to close applications as this simply minimizes the application and leaves it running in the background. Instead, press the Menu key, select the Close or Exit option to exit the application.Don't leave your Browser open on any active webpage when not in use.If programs run in the background it will also lead to overheating and also quick battery drainage.Please have a look at these Article I am sure it will help you a lot in overcoming your problems :
KB14320 : How to maximize battery life and free memory on the BlackBerry smartphone.
Good luck and enjoy your new BlackBerry
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

WPA MIC errors after upgrading WLC to 4.0.217.0

Hello all,
I have an internal wireless network with two 4404 controllers and 129 access points.
I ran into a problem after upgrading the controllers from 3.2.40.0 to 4.0.217.0 involving a few APs displaying WPA MIC errors every couple minutes.
All of them except for one have stopped yesterday, but one of them is continuing to do so.
Has anyone ever experienced this while upgrading to this version, or have any tips to prevent/stop this?
Thanks.

Hi jpeterson6,
yes i have experienced this as well, it seems to be a particular client attempting to connect through that AP. From what i can remeber i had to check the security details of the client (WPA TKIP) which were wrong. not too sure if this might also be your problem.
I will have a look as soon as i can and report back if i find out anything more:
If it is not, try and grab a few more details and report back
Cheers
Mark

Out of Memory error after upgrading to Reader X

We have several PDF documents that work fine on Reader 9. But after upgrading to Reader X, the files will not open. Instead, they report an Out Of Memory error and a blank document opens instead. Removing Reader X and re-installing Reader 9 corrects the issue. This has been reproduced on 3 different PCs running both Windows XP and Windows 7.
Any suggestions?

Just to throw in my 2 cents... Adobe has known about the out of memory bug at least since 01/12/2011 because that is when I reported the problem to them. I even had an escalated support case #181995624 and bug#2800823. Our problem comes from a EFI Fiery E7000 attached to our Lanier LD460c Copier. Any pdf's made from that copier will not open in Acrobat X, although they will open in lower versions of Acrobat just fine. Our only workaround is to keep Acrrobat 9 on office computers, or you can open the offending pdf in Acrobat 9 or earlier and print it to pdf, and then it will open in Acrobat X!!! They acknowledged that this was a bug, see my email chain below. This was the last update I received from Adobe, very frustrating...
From:
Sent: Wednesday, February 09, 2011 9:12 AM
To:
Cc:
Subject: RE: Case 181995624; Unable to open PDF
Hi Phil,
We do not have this information or estimate time by our Engineering team yet.
Regards,
Neeraj
From:
Sent: Monday, February 07, 2011 8:19 PM
To:
Cc:
Subject: RE: Case 181995624; Unable to open PDF
Next major release as in the next patch for Acrobat X, or as in Acrobat 11?
From:
Sent: Saturday, February 05, 2011 4:31 AM
To:
Cc:
Subject: Case 181995624; Unable to open PDF
Hi Phil,
You can get back to us with the Bug Number provided you earlier based on which we will give you the update by our Engineering team. However, the update for now is that it is decided to fix in our next major release.
Regards,
Neeraj
From:
Sent: Thursday, February 03, 2011 1:33 AM
To:
Subject: RE: Case 181995624; Unable to open PDF
Can you send me a link to where I can find information on the bug?
From:
Sent: Tuesday, February 01, 2011 10:14 AM
To:
Cc:
Subject: Case 181995624; Unable to open PDF
Hi Phil,
Hope you are doing well.
I have researched on your issue and found that it is a BUG with Acrobat X. I have logged it on your behalf so that our Engineering team can have a look on that. Please find the Bug Number #2800823 for any update on this in future. I am closing this case on your behalf.
Have a nice day.
Regards,
Neeraj
From:
Sent: Tuesday, February 01, 2011 12:22 AM
To:
Cc:
Subject: RE: Case 181995624; Unable to open PDF
Any updates on this case?
From:
Sent: Friday, January 14, 2011 2:03 PM
To:
Cc:
Subject: RE: Case 181995624; Unable to open PDF
The EFI Fiery E-7000 Controller version is 1.2.0 and it handles the scanning and printing functionality of our Lanier LD160c copier. I have attached two sample files. One is a 1 page scan from our copier. The other is a combined pdf that I just created in Acrobat 9. The first two pages of the combined pdf consists of a webpage that I printed using Acrobat 9 and then the scan from the copier is on the 3rd page. In Acrobat X, once you get to the 3rd page you will receive the Out of Memory error. It will open in previous versions of Acrobat just fine though.
From:
Sent: Friday, January 14, 2011 11:52 AM
To:
Cc:
Subject: Case 181995624; Unable to open PDF
Hi Phil,
Thanks for the information.
I have the PDF file provided by you and able to reproduce the behavior. I tried to call you at 214-303-1500 but got voice mail.
Please let me know when you will be available so that I could call you and continue further with this issue.
Regards,
Neeraj
From:
Sent: Thursday, January 13, 2011 6:57 AM
To:
Cc:
Subject: Re: Case 181995624; Unable to open PDF
It is a walk up copier and we scan to email. The EFI Fiery controller E7000 handles pdf conversion for the copier, but yes it has the latest firmware. The bottom line is that we have 3 or 4 years worth of pdfs created from that copier rendered useless by Acrobat X. They open fine in previous versions of Acrobat. Did you get the test pdf file when this case was created?
-- Sent from my Palm Pre
On Jan 12, 2011 6:12 PM, Acrobat Support <[email protected]> wrote:
Hi Philip,
Thank you for choosing Adobe Support we have got your concern, we see that you are facing an issue with opening PDF files in Acrobat X, created from Lanier (Ricoh) LD160c copier. A technical support case 181995624 has been created for your reference. In order to assist you further. We would like to have the following information.
· Are you using the latest scanner driver ?
· What is the exact scanning workflow ?
Regards
Acrobat Support

HTTP Authentification Error after upgrading CRM 4.0 to Oracle 10g

Hi all,
after upgrading our CRM 4.0 Server from Oracle 9i to 10g, it isn't possible to connect from a local PC via EP 7 to the PCUI applications.
[Browser running on local PC] -> [EP7] -> [CRM4 with Oracle 10g]
no authentification possible
[Browser running on local PC] -> [EP7] -> [CRM4 with Oracle 9i]
works fine.
[Browser running on local PC] -> [CRM4 with Oracle 10g]
works fine.
[Browser running on EP7 server(!)] -> [EP7] -> [CRM4 with Oracle 10g]
works fine.
It looks like a network security feature of Oracle 10g which blocks "man-in-the-middle" attacks?!?
Anyone any idea?!
Regards,
Sven

Hi Stephanie
Did you find a resultion to your genstatus issue.
We are in a similar issue currently - we have the following errors
CNBCCPSAP00070            CG
CNBCCPSAP00070            CG
DOC_HEADER                CG
S000000290CG 98FBC48FBE4A0040888E14E1C27C7262
CAMPAIGN_WRITE            CG
Look forward to your response on this
Regards
Eddie

Login Error after Upgrading from BW 3.5 to BI 7.0

Hi Experts,
We have carried out an upgrade from BW 3.5 to BI 7.0.
After Upgrade we are not able to login using SAP GUI. we are getting an error saying..
Username or Password not Valid..
During the upgrade (in Netweaver 2004s ) is there procedure necessary to be followed, which we could have missed..
Your response will be greatly appreciated.
Regards
LRaghunahth

Hi
Thanks a lot for your reponse.
Basically I am able to login thru sap* / ddic and can unlock the users / reset the password.
But the customer wants to know why the user is getting locked and it happened because of any procedure miss whil performing the upgrade..
if it is usual that users get locked during upgrade, any SAP Notes to refer..
Thanks a lot for helping in this community.
Best Regards
L Raghunahth

Look-up error after Upgrade

Similar Messages

Maybe you are looking for