LOOK UPS situation

Hi,
i studied all the links regarding LOOK UPS which are provided in the SDN .. but still i did't clear with this information.. when exactly we will go for lookups.. i means in which situation we will go for lookups..( i studyed that lookups will interrupt the mapping and interact with the database and access the data from the database in the mapping time..) but in what scenario we need to get the data from database...give me a simple example..
can any body give me a brief idea abt LOOK UPs..
thanks
babu

Within an XI mapping it is a common requirement to be able to perform data lookups on-the-fly. In particular, there may be a need to look up some data that is maintained in an R/3 application.
In the error handling topic we have seen the different validations which need to be performed on file. This can be done through Lookup.
Some use cases:
Look up material number from table MARA.
Look up cost center budget.
Look up employee information.
Look up unit-of-measure (UOM) information from table t006a.
Lookup for raising an alert.
The purpose of the lookup may be:
To perform application-level validation of the data, before sending it to the backend.
To populate fields of the XML document with some additional data found in the backend application.
This is a form of value transformation.
The "value mappings" offered by XI are not adequate in this case, since the data would have to be manually entered in the Integration Directory.
There are two ways in which we can do lookup:
Call lookup method from GUI mapping.
Call lookup method from XSLT mapping.
Lookup method from GUI mapping can be called using any of the following ways.
RFC lookup using JCO (without communication channel)
      /people/sravya.talanki2/blog/2005/12/21/use-this-crazy-piece-for-any-rfc-mapping-lookups
RFC lookup with communication channel.
                 /people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
Lookup using JDBC adapter.
      /people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
      /people/sap.user72/blog/2005/12/06/optimizing-lookups-in-xi
CSV file lookup.
      /people/sundararamaprasad.subbaraman/blog/2005/12/09/making-csv-file-lookup-possible-in-sap-xi
Thanks and Regards,
Chirag Gohil

Similar Messages

How to use Infocube in Look ups

Hi Experts,
i have a requirement that i have Infoset as source and Infocube as target. For the two key figures in the target i neet to get the values from some other Infocube by comparing some characteristics using look ups..
Before i have used Look ups to get the data from DSO..now i have a question that how to get the values from Infocube ..
thank you..

Hi,
also see following function module
RRW3_GET_QUERY_VIEW_DATA
Thanks and regards

Look-Ups

Hi All,
1.Can you tell me what exactly the look-ups are?
2.Please tell me about the RFC and JDBC look-ups.
3.Also please tell me how many data types do I need to create for For JDBC <---> RFC sync ?
4.From my point of view I should create 2 data types ,2 message types for JDBC Request and JDBC Response while I can skip creating data types for Receiving RFC side.Is it?
Thanks in advance.

Hi Swetha,
1.Can you tell me about when are RFC,JDBC,CSV look-ups are used?
Look ups can be useful in any where, especially when we like to map the value that is reseided in some other application system and that value tend to change or get updated very frequently in that system .So as to get the recently updated values we prefer this .if it doesnot happen we cn directly go for hardcoding either by using Fixed values or value mapping.If the value is queried from R/3 we use RFC look ups.If the value is to be retived from Database we go for JDBC.
2.I think look ups are nothing but the User Defined Functions.Is it?Please tell me in detail.
Look ups need not not only Java functions we can do that in BPMs remember Filr to RFC to FIle using BPM scenario there we get values from RFC response too in Bpm .But this is again a performance issue with out using UDF.But its very easy to perform the lookups using UDF.Even SAP has provided good JavaAPI to perform lookups according to requirement.In most of the cases we use lookups for querying single values.But in PI7.1 there has been added advantage in the form of Graphical lookups to avoid java code and maintin reusability.The link was mentioned by experts already.
3.Please give me any scenerio about the implementation of RFC,JDBC,CSV look-ups .
I am giving example which i came across while working with EDI documents in SEEBURGER environment.There was a field value "TE" in some segment, while mapping to target i should get the Defintion forTE wich was maintained in some other data base and map to the target side, for that purpose we had to use JDBC look up and ping the data base to retrive the required value as the result of Lookup. So when i applied look up i got the value "TELEPHONE" for the code TE.The same way for FX the lookup result was FASCIMILE.Not only this for PLANTCODES and some other business related data we might need to use Lookups...Hope you understood my point.
Thanks,
Ram.

Help regarding Look ups

Hi All,
Right now i am using look ups for RFC Receiver Adapter.
i have code something like this in Mapping for Look ups
//Determine a channel, as created in the Configuration
channel = LookupService.getChannel("DB-SYSTEM-NAME","DB-CHANNEL-NAME");
Now my problem is here in this code i am hard coding "DB-SYSTEM-NAME" and "DB-CHANNEL-NAME". I dont want this hard coding, as when i will transport this code to Quality or Production system, at that time name is going to get changed. If suppose DB-SYSTEM-NAME is SAPXIDEV then in QA it will be like SAPXIQA and in Production it will be something like SAPXIPRD like that.
I want to know that is there any way to get SID of XI system in this code? as in place of DB-SYSTEM-NAME i am giving SID (business system name) for XI Dev server, which i need to change when i will transport it to QA or PRD.
Please reply me as soon as possible. Please let me know if any other things need to be clearified.
Regards,
HS

Hi,
Search on SDN for Value Mapping Using Graphical Mapping.
The basic idea of using Graphical Mapping is like using a properties file in Java. You will have a <b>Key-Value</b> pair . The Key is always the same across the environments which you hardcode and the Value will change.
So KEY will be BusinessSystem and the value will change across environments and so on.
Regards
Bhavesh

What is meant by DB look ups in XI ?

what is meant by DB look ups in XI ?

hi,
see michale's pdf..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a03e7b02-eea4-2910-089f-8214c6d1b439
for more info go to..
Re: mapping look up's
biplab

What is Mapping Look ups?

Can any one explain me what is mapping look ups in graphical mapping?

Hi,
There are three types of look ups u can do
RFC look up
SOAP look up
JDBC look up
What is Lookup and why we need:
Within an XI mapping it is a common requirement to be able to perform data lookups on-the-fly. In particular, there may be a need to look up some data that is maintained in an R/3 application.
In the error handling topic we have seen the different validations which need to be performed on file. This can be done through Lookup.
Some use cases:
Look up material number from table MARA.
Look up cost center budget.
Look up employee information.
Look up unit-of-measure (UOM) information from table t006a.
Lookup for raising an alert.
The purpose of the lookup may be:
To perform application-level validation of the data, before sending it to the backend.
To populate fields of the XML document with some additional data found in the backend application.
This is a form of value transformation.
The "value mappings" offered by XI are not adequate in this case, since the data would have to be manually entered in the Integration Directory.
There are two ways in which we can do lookup:
Call lookup method from GUI mapping.
Call lookup method from XSLT mapping.
Lookup method from GUI mapping can be called using any of the following ways.
RFC lookup using JCO (without communication channel)
/people/sravya.talanki2/blog/2005/12/21/use-this-crazy-piece-for-any-rfc-mapping-lookups
RFC lookup with communication channel.
/people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
Lookup using JDBC adapter.
/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
/people/sap.user72/blog/2005/12/06/optimizing-lookups-in-xi
CSV file lookup.
/people/sundararamaprasad.subbaraman/blog/2005/12/09/making-csv-file-lookup-possible-in-sap-xi
Lookups with XSLT - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8e7daa90-0201-0010-9499-cd347ffbbf72
/people/sravya.talanki2/blog
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/05a3d62e-0a01-0010-14bc-adc8efd4ee14
DB lookup - /people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
SOAP Lookup - /people/bhavesh.kantilal/blog/2006/11/20/webservice-calls-from-a-user-defined-function
You can refer to these links.
/people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer Absolute stealer.
/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
For Java APIs and also here you can map that how many types of lookups are possible in XI.
http://help.sap.com/javadocs/NW04/current/pi/com/sap/aii/mapping/lookup/package-summary.html
Hope this will help you.
Regards
Aashish Sinha
PS : reward points if helpful

DB Look Ups...... Conection Pooling

Hi Frnds,
Can anyone explain Connection Pooling DB Look Ups how to implement in XI.
Share any documentation
any links,
REAGRDS,
RAJ

Hi,
Some links for Lookups
/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
http://help.sap.com/saphelp_nw04/helpdata/en/c9/9844428e9cbe30e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/406642ea59c753e10000000a1550b0/frameset.htm
Reward if helpful
Kulwinder

Can you create a If, then [Show DropDown List] If not [Show 2, Person or Group look ups fields]??

Hello I am tying to learn SharePoint at a "Throwing you into the Lions with a toothpick" way. I can create basic columns and work in SharePoint designer fairly OK. Now I am trying to update one of my list with the following and I cannot seem
to know how to start this off. I am looking for a way to learn it and not have the answered provided to me. So if it can be done in SharePoint all I need is guidance and I will trek and learn what I need to make it work.
This is what I have in mind see if its possible:
If column "Do you like beer" (Yes/No) = yes
Then display (Choice) Drop down list
20 options
Mandatory Field, must select one
If not then show (Person or Group) 2 fields
Name of beer = [Enter Beer Name]
Maker of beer = [Enter Beer Maker]
Mandatory field

Hello Matrixwolf,
As i understand you want to show column based on selection in list. You can use Jquery/javascript to hide/show column based on selection and also use Jquery to make those fields mandatory.
Before you begin just remember that "Person or Group" only use to select people OR sharepoint group (as you mentioned in 5 point) so you may use simple text column to capture those details.
Here is some ref links for jquery implementation:
http://www.sharepointnadeem.com/2013/09/sharepoint-showhide-list-column-based.html
http://bingggg.blogspot.sg/2011/11/showhide-columns-based-on-drop-down.html
Your should be:
1. Create columns in list as per your requirement
2. Then open newform.aspx and editform.aspx pages, and use content editor webpart on that page to use jquery.
You can search on Bing/Google about content editor webpart and its uses.
Another way, you can modify the list form infopath designer and use infopath rule to hide/show the column.
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

HTML Client related entity look ups

How are you folks handling the very typical scenario where the user is completing a form and realizes that they need to add a record to a related entity lookup table before they can complete their entry. The primary form will have validation so I
don't want to force them to save, and as a result they have to quit and abandon their entry, every time they need to add a look up, and then come back and start over. This was easy in the Silverlight client. Any ideas?

Hi Hessc,
The Code from Paul's article is here:
https://code.msdn.microsoft.com/Reusable-search-screens-in-91c64c30/
The simplest way to this is to add a button which opens a browse screen and then passes the selected item from that screen back to the calling screen using the afterClosed event.
This is what Paul is doing here for selecting the customer from an order entry screen:
myapp.AddEditOrder.BrowseForCustomer_Tap_execute = function (screen) {
myapp.showBrowseCustomers(screen.Order.Customer, true,
beforeShown: function (myscreen) {
afterClosed: function (myscreen, action) {
screen.Order.Customer = myscreen.SelectedCustomerParameter;
He uses the same technique to set the selected item on BrowseCustomers screen after adding a new customer.
Additionally he is reusing an existing BrowseCustomer screen by showing and hiding buttons based on a screen property called 'IsInSelectMode".
So the flow for new customer is:
OrderScreen > Tap BrowseForCustomer >
BrowseCustomerScreen > Tap AddCustomer >
AddEditCustomerScreen > Save (afterClosed sets selected customer on BrowseCustomer screen) >
BrowseCustomer > Close (afterClosed sets Customer on OrderSreen) >
OrderScreen
HTH,
Josh

RFC Look ups

Hi all,
I need to get a value for a field from the target system according to the soucre field.
For Ex : material number 0001 is from source system and i need to find the corresponding material number from the target SAP system.
Please let me know how it can acheived.
Thanks
Faheem

1. Create a RFC in R/3 system that has ur desired functioanlity.
2. Create RFC look up in the UDF.
3. Map the UDF as follows
Source- field-> UDF(RFC Look up)---> Target Field
Refer this for more info
/people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8e7daa90-0201-0010-9499-cd347ffbbf72

DB Look Ups using JAVA Mapping

Hi Frnds,
I'm working one B2B Project, my question is,
I have to retrieve Order ,Order Response from one Data Base,
its already stored in DATA BASE as a CLOB Message.
I developed one JAVA Map to retrieve Order And Order Response.
its working fine,
But i made a connection through JAVA Map only,
But as Per SAP its not a good advice to perform Statefull operations through JAVA Mapping.
My Client not accpeting this approach.
what is the next way,
I performed some DB Look up using JDBC Adapter And Visula Admin.
But in this case its not a easy to retrieve the Order And Order Response.
Because in My logic there is 5 SQL Statements there.
Any one can provide Solution.
Thanks ,
Raj

Hi,
As you said, you have to run 5 sql statements and fetch Order and OrderResponse. Let's say all your inputs for these sql statements are A,B,C,D,E then these will be input parameters for Stored Procedure and out parameters will be Order and OrderResponse. Fetching logic should be in the stored proc.
By this approach you will get Order and OrderResponse in the Stored Proceedure response structure. That structure you can map to your Receiver structure. (if i am not wrong this is your aim)
You can see this sample blog on Stored Procedure scenario...
JDBC Stored Procedures
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/5474f19e-0701-0010-4eaa-97c4f78dbf9b
(3rd Scenario in the above pdf)
Also refer
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/frameset.htm
Regards

How to monitor Mapping Look ups ?

Hi @,
I my application I am using maping lookup where Iam passing a value and then getting Y or N based upon the return from look up from R/3 .Fo rthis i am using rfc adaptor .
Now when i am execfuting the mapping the result is not getting proper I need to verify that whether the lookup is happening or not.I need to monitor the same.
Regards

Amit,
Add Trace Statements in your User Defined Function and then you will be able to see these Trace in the Runtime in the Trace Section under the SOAP header in MONI.
use this code in the UDf,
AbstractTrace trace= container.getTrace();
trace.addWarning("What Ever Message and variables etc");
Add these Trace to the Request RFC XML, likewise Print the response RFC XML and check what it returns and then see why the parser used to parse and get the RFC responsefailes, etc.
Regards
Bhavesh

Catch bad AD look ups

I'm attempting to write a small line a of powershell script that will check a csv of first and last names from AD and report their usernames. Everything seems to work okay, except it doesn't report names that it couldn't find. Is there a way to incorporate
something like a Try Catch?
The script:
import-csv C:\Users\1234\Desktop\names.csv | forEach { Get-Aduser -filter "surname -eq '$($_.Last)' -and
givenname -eq '$($_.First)'"} | Select SamAccountName | Export-CSV C:\users\1234\desktop\usersout.csv
Sample CSV
First,Last
John,Doe
Bob,Smith

Try/Catch won't work when you use the -Filter parameter in Get-ADUser, only when you specify by
-Identity. What you can do is test for the existence of the object like this:
import-csv C:\Users\1234\Desktop\names.csv | forEach {
$User = Get-Aduser -filter "surname -eq '$($_.Last)' -and givenname -eq '$($_.First)'"
If ($User) {
$User
} Else {
Write-Warning ("Could not find user by Surname <{0}> and Givenname <{1}>" -f $_.Last, $_.First)
} | Select SamAccountName | Export-CSV C:\users\1234\desktop\usersout.csv
Boe Prox
Blog |
Twitter
PoshWSUS |
PoshPAIG | PoshChat |
PoshEventUI
PowerShell Deep Dives Book

Master data look up : Where used list?

All;
I am in a situation where I have to find out a list of look ups (routines/update rules) on my master data 'M' table.
When I did a where used from se11 View on infoobject 'M' table it gives back few programs but I am not sure how to find out which update rules are using those programs.
Please advise.
Thanks.

Hi Lasya,
Check the table RSUPDROUT and RSUPDINFO. It gives the update rules based on infoobject level.
Also try the following link which has a program .
Search for start, update rule, etc. that uses infoobject
It will definitely solve your problem.
Regards,
Rajani.

File to IDOC .. Look up Problem.

Hi Experts,
Iam doing file to Idoc scenario .. In which iam sending PO Response (ORDERS) from fie to idoc.
Source
File
Target(LSname)
R/3 (LS356)
R/3 (LS357)
R/3 (LS358)
Code
A    ( For LS356 )
B    ( For LS357 )
C    ( for LS358 )
Delivery ID
2536
2537
2538
GLN Code : 58899653
I have 4 fields in my look up table ..
CODE
GLN CODE
Delivery ID & Logical system
Using CODE and GLN Code as lookup key ---> I need to get the value of Delivery ID and Logical System.
So taking Delivery ID and LS name as key .. My source file will go to the corresponding R/3 system.
Its urgent .. Please respond asap.
Thanks
krupa.

Hi,
The problem is i cant write as static condition in receiver determination.
My Scenario is File to Idoc -- ( One legacy system to any of the 3 R/3 systems).
According to my requirement i need to write some 2 look ups
Delivery Look up table
CODE,    GLN Code,        Delivery ID,    LogicalSystem
A,           58899653,      021085,      LS356
B,           558899653,     021083,      LS357
C,           58899653,      021082,      LS358
Using Code and GLN Code as lookup key ---> get the value of Delivery ID and Logical System
IdocCtrlLookup
Purpose: To read the IdocCtrlLookup file to populate the Idoc control segment
valid control record has to found in IdocCtrlLookup file for Delivery ID
Delivery ID     Sender Port    Sender partnernumber        RX Port    RX partner num
021085      SAPGD2        GD2DVRC103                A000000046     GTEHHLD01
021083      SAPGD4        GD2DVRC122                A000000048    GTEHHLE01
021082     SAPGD4        GD2DVRC122                A000000047   GSEHHLE01
Please help how i can write the lookups and also how can i determine the Rx system dynamically with the above scenario.

LOOK UPS situation

Similar Messages

Maybe you are looking for