Looked for but Not found

I have looked for but not found. So that means that more than likely I have just not looked in the right place.
What I am trying to find is the total number of contacts the the 8530 will hold. IE; 500? 1000?
I know that each contact will take so many numbers and so many email address's but how many individual contacts will it allow you to add?
STRIKE HOLD!
Land of the Free Because of the Brave!
Solved!
Go to Solution.

Hi and welcome to the forums!
I have yet to see a credible source publish actual limits for records on any of the calendar, memo, tasks, or contacts apps. If you find one please post. I usually tell users to keep it manageable. To me 6,000 contacts? Seriously?
Heck I wasn't stationed with 6,000 people in the U.S Army! .
Remember the device memory is flash memory, designed for keeping all device functions running at peek levels. Storing large amounts of records just takes that much dynamic memory and makes it static.
Let me know your thoughts!
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Similar Messages

HT1923 Can not uninstall old version because the file it is looking for is not found on windows 8.1

First off I want to start that I am an IT professional, so not a dumb PC user.
I am running Windows 8.1. I have been running Itunes for a long time and when the auto-updater prompted me for an update, I used that to update. Aparently something happened during one of the updates and Windows thinks I have v 11.1.1.1 installed as well as the newest version. I discovered this when I connected my Ipod recently (It was a few months since my last sync) and it wasn't be recognized by Itunes. Windows discovered it as a device but Itunes wouldn't see it. I went to the forums/support and tried the trouble shooting steps to no avail. I finally did the normal "uninstall/reinstall" process and that is when I saw the two entries in the programs list in windows. I uninstalled the current version. When I tried to reinstall it would error out with "can not find the path to iTunes64.msi". I had a few of them in the path but they were for newer versions, not the 11.1.1.1. Then I looked around and saw the directory tree for Itunes were still there.
I tried to edit the registry in the local machine->uninstall hive but itunes was not on the list there because I went through every entry. They all had the names from programs on the list but Itunes wasn't there. I uninstalled everything else as per the Itunes support instructions (Quicktime/Bonquor/Etc) and still it didn't work. I deleted the Itunes directory manually and then ran CC cleaner to a few times to clean out all the broken registry entries. After that was done I still couldn't install Itunes because it detected the program from the list in windows that said it was installed (v 11.1.1.1). I restored the directory from my recycle bin, launched the exe directly and it worked and I was able to detect/sync my Ipod. BUT the system doesn't think I have it installed so I have to manually kick it off from the exe itself.
I want to fix this. I would think it would be to edit something, registry I assume, that populates that installed program list and then the newest installer should run fine. I am stuck so I am looking for help. Any suggestions/ideas or anything?
Thank you in advance.

I can't seem to find a way to delete this...SO I unmarked it as a question.
I solved the problem, I aparently missed the program ID number when I searched. I found it and then went through the registry and removed the other references to that ID. Once I did that I was able to install the new Itunes without incident. In the process it also cleaned up the old entry on my programs/features list.
Even though I checked the registery 2x trying to clean up references to Itunes, the search and my manual look through the Uninstall entries I missed it. Sorry to waste anyone's time.

Newbie here, i have a question, i was looking for but not sure how to ...

hi guys, i have a question, hope i'm not doing something wrong here...
well i was wondering if i put all my songs, on itunes, and than transfer to ipod... could i erase all the tunes i have on my computer? i mean, i would love to be able to free the space on my hard drive...
I was wondering if i also remove the songs from my itunes, it would erase the songs on my Ipod as well?
thanks in advance.

You can delete songs from your iTunes/computer hard drive after transferring them to the iPod, and for this you need to set your iPod to manage the songs manually.
However, this is an extremely risky option because when (and not if) there comes a time to restore your iPod, which is a very common fix for iPod problems, then all the music would be erased. If you no longer have the music in iTunes (or any other back up), then all that music would be lost.
What if the iPod were lost/stolen/needed repair? Again, the music would lost. I strongly recommend a back up, and if computer hard drive space is in short supply, you should seriously consider an external hard drive. They are not expensive, and the cost is well worth it when compared to the loss of all your precious music.
At the very least back up your music to either cd or dvd before deleting it, particularly any purchased music/videos, as this would have to be bought again if it were lost. See this.
How to back up your media in iTunes.

I cannot find a photo I did a lot of work to create. I have several library files that look similar but I found that at least one photo is not in both. Can I somehow merge these libraries. Can someone tell me how.

I cannot find a photo I did a lot of work to create. I have several libraries that look similar but I found at least one photo that was in one and not the others. Can someone tell me if I can merge these libraries, and how, and what to watch for that might cause problems.

the paid version of iPhoto library manager can merge libraries safely
Why do you have several libraries? Why are you not just using the one that has what you want?
LN

Installed but not found on computer

I've successfully installed the latest 10.1 for my 64-bit laptop with Windows 7. A check by Adobe confirms that it was properly installed, and that I have the correct version for my computer.
AND YET, there is no icon for it anywhere, it doesn't come up on my list of Programs, when I enter "Adobe Flash Player" in the search bar it shows no such program, and when I try to play a FLV file, it won't give me Flash Player as an option. So..... I have it on my computer, but I apparently am not allowed to see it or access it?
I've uninstalled and re-installed several times, and cannot for the life of me figure out what the problem is. Any help for this maddening situation?

Hi,
Yes, I read his comments and I made sure Shockwave Flash Object was enabled in IE as he suggested. I am trying to make a flip book. One of the posts here in the forum said to make a SWF file, which I did. But now I can't figure out how to do anything with it. I thought Flash Reader was the right program to look at it, but maybe I'm wrong? Maybe I need Flash itself? The flip book thing has me pretty frustrated and confused. All the sites and software I've tried are poor quality. I was hoping I could figure out how to do it through Adobe to get better quality.
1. Oct 17, 2010 1:30 PM in response to: jonstrebler
Re: Installed but not found on computer
Hi, Flash Player is a browser plugin, not a stand alone Player. You should have Shockwave Flash Object in add ons in IE and make sure it is enabled.
Your Flash files are in C:\Windows\SysWOW64\Macromed\Flash
You may want the Adobe Media Player:http://www.adobe.com/products/mediaplayer/
Hope that helps,
eidnolb

I need to reinstall Creative Suite 5.5 Design Premium and it tells me it is a valid serial number but not found on computer

I need to reinstall Creative Suite 5.5 Design Premium and it tells me it is a valid serial number but not found on computer

Anne Marie Bartella please verify the serial number you are using is the same serial number registered with Adobe. For more information please see Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

Airport Express green, but not found in Itunes10 - Bonjour problem?

my AX is connected to my network (join a network) and connected to speakers to use as remote speakers on iTunes (airtunes). Connection works great, status is green. I have 2 windows pc's on the network: XP and Vista.
As long as iTunes was shipped with Bonjour 1.0 this was no problem.
From iTunes version 8, when Bonjour 2.0 was introduced, the Airport was not visible anymore in iTunes, and also not in Airport Utility. Strange fact however: the AX seems to work fine (green light) and I can view the configuration in Airport Utility via 'Configure Other...' and entering the ip address on my local network. all options are set correctly for Airtunes.
I believe this is a bonjour related problem, as until now, the fix was to uninstall Bonjour 2.0 and install an old version (1.0.6)
iTunes10 however does not seem to work with Bonjour1.0
So I'm at a loss: my AX is not visible in iTunes, not in XP, not in Vista.
Other things I tried:
* disable firewall completely: no luck
* reset airport express and reconfigured (all GREEN light and visible via configure other, but not found in a scan of Airport Utility when using bonjour2.0
* open port 5353 TCP/UDP in my router (D-Link DI-524) for the AX: no luck
Anyone having the same issue?
config: AX(n) FW7.4.2 in join a networkmode WPA2-DHCP, Dlink DI-524, WinXP, WinVista, iTunes 10, Airport Utility 5.5.1Win, Bonjour2.0.2

I have exactly the same problem. Extremely annoying. Before, I could fix it by re-installing Bonjour after each iTunes-upgrade. But after version 10, that doesn't work any more. Or rather, I can see the AX in Airport Utilities, but it doesn't show up in iTunes. (Weird thing is, it works fine on my other computer, both run Windows Vista).
I guess one answer would be to roll back to an earlier version of iTunes?
Is Apple aware of this issue? It must be a bug in Bonjour. It's been around a long time now. Please fix it!
Message was edited by: Tomas Härenstam

Looking for SAP Note 1320575 - M View not existent

Hello experts,
I'm looking for SAP note 1320575. I can't find any information in SAP Marketplace for this note. In my SAP BI system the note is implemented in the generated programm which fills master data.
The correction want to create a data object with type M table of master data. M table normally is the view on time dependent and time independent master data attributes. But my InfoObject has no master data attributes, only texts.
When I want to fill this text manually I get a dump for this data object creation because M table doesn't exist.
Any ideas about this SAP note or this problem?
Kind regards,
Peter

hi
I think you will have to float a invitation to consulting companies to do this assignment for you.
Regards
sameer

GL Journal entry looks good but not Fixed Assets in 11.5.10.2.0 -

In the GL Journal entry it looks perfect, but not in FIXED ASSETS
This is on 11.5.10.2.0
Depreciation amount is not correct in Fixed assets and Any thoughts on that or please let us know how to go about
In the Form
Depreciation
Period
Jan-12
expenses 651.94000.89..whateer
Deprectiaon should be 442.00 whereas it is showing different number
whereas it does show properly in GL Journal entry
How to get this value transferred or migrated
GL looks good but not in Fixed assets- Is there a process we can review or
find more information on it

Hi,
I am pasting my comments next to yours :
These are the issues that needs to be resolved:
• Depreciated balance are over stated in Fixed Assets and needs to be adjusted to reflect what is in GL. => I wasn't sure how this was was possible, since I assumed that your Asset depreciation journals in GL were being fed from FA. So if depreciation was thought to be incorrect in FA, its corresponding balance in GL should've been incorrect as well. But I guess that's not the case because your other questions imply that some of these assets were acquired and their might have been some conversion activity involved.
• Fixed Assets mass additions are selecting GL accounts that should not be selected. We need to know how to change the criteria for selection. +=> Check the Asset Clearing and CIP clearing accounts on your asset categories+
Later:
• We need to learn the proper way to convert assets we acquired from acquisition into our Oracle Fixed Assets system, so that depreciation start at the time we acquire the assets. => That is correct, you could change your original date placed in service to the acquisition date as part of conversion and if you have the correct prorate convention, they should depreciate the way you want it to.

Error while running Validation Data for category not found in application

Dear Experts
While running Validation and IC Matching I am getting Error i.e. "Data for category not found in application CONSOLIDATION"
May some one tell me the reason and resolution.
Thanks
Ritesh

Hi RItesh,
I suppose your problem was solved in the meanwhile.
Anyway we had the same issue, when running Validations against ICMatching App.
That was because Method VALIDATION of Class CL_UJP_VALIDATE tries to relevant data in order to perform calculations (line 127), but if no data is found, ends raising an exception (with a misleading text line 143).
read_trans_data_sqe( exporting i_application = d_application
                                 it_dim_list = dt_app_dim_list
                                 it_sel = lt_sel
                       importing
                                 er_t_data = lr_data
assign lr_data->* to <lt_finance>.
create data lr_data like line of <lt_finance>.
assign lr_data->* to <ls_finance>.
lr_data1 = lr_data.
if <lt_finance> is initial.
NO DATA FOUND -> EXCEPTION
    raise exception type cx_ujp_process_exception
          exporting textid = cx_ujp_process_exception=>ex_no_data_found
                    d_application = d_application
                    d_value       = l_value.
endif.
Hope it helps
GFV

Pcre-config for libpcre not found.

hi
When i am configuring apache to set reverse proxy.. i found the below error
configure: error: pcre-config for libpcre not found. PCRE is required and available from http://pcre.org/
when i check with pcretest it is showing me PCRE version 6.6 is available. but when configuring it is not connecting to this pcre. I am accessing a remote desktop.
thanks

hi
When i am configuring apache to set reverse proxy.. i found the below error
configure: error: pcre-config for libpcre not found. PCRE is required and available from http://pcre.org/
when i check with pcretest it is showing me PCRE version 6.6 is available. but when configuring it is not connecting to this pcre. I am accessing a remote desktop.
thanks

Document splitting: Items for clearing not found

Dear All,
I have created bank gl without tick of open item management now i have activate OIM & Transcation exisit for the same
I have done it as given below:
1) I have made GL balance Zero by posting an additional entry by F-02 (document type SA)
2) Block the GL for posting
3) though help of programe RFSEPA02 i have done the same.
Now the GL is OIM
Now i have to reverse the additonal entry pass to make GL balance zero
At the time of reverse through FB08 system gives an error massage
*" Document splitting: Items for clearing not found"*
Please any one help to resolve the issue
Thanks
Vijay

Dear Gladys xing
Thanks for your reply,
I have also done the same thing by passing one more entry to create the same balance.
When i am trying to clear open item for the both the extra entry system gives an same error
"Re: Document splitting: Items for clearing not found"
is this possible to clear that open item through F-03
Thanks
Vijay

TS1538 Followed troubleshooting for iPhone not found in devices iTunes and that did not work... Now what?

Followed troubleshooting for "iPhone not found in devices" iTunes and that did not work... Now what?

That's what I tried. The 6 steps and I do not have security software on my phone. iTunes on my Mac is still giving me the warning that I need to download the latest version on my phone, and is not recognizing it in devices, which is the irony because that's what I need to actually update it

Windows 7 help The topic you are looking for is not available in this version of Windows

When I click on help, I get this message: The topic you are looking for is not available in this version of Windows.
I forget what my topic was, however, that is the response for any I try to get help for.

Hi Akikuno
It sounds like you are having issues with your help not coming up when you need to use it. I am providing you a link to a Microsoft Forum Thread where they are addressing the exact error message you are receiving.
http://answers.microsoft.com/en-us/ie/forum/ie9-windows_7/the-topic-you-are-looking-for-is-not-avail...
I would like to thank you for posting on the HP Forums and hope this resolves your issue so you can go back to enjoying your HP product. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Su[12345] : passwdutil.so: nameservice switch entry for passwd not found.

Hello all,
I got a problem with my Sun Fire, with solaris 10, when my system boot, we got a powerfailed :-( and when my sun restart again after a long checkdisk with many errors... i got this error everytime i want to do a su.
su[12345] : passwdutil.so: nameservice switch entry for passwd not found.
I don't know how to fix that.
If anyone have a working solution, i would be wonderfull :)
Thanks in advance

Use your service contract and open a support case with Sun.
http://www.sun.com/secure/contact/
You will then be able to draw upon all their support resources.
They will be able to help you investigate the health of all the hardware,
as well as work with you to decide whether you need to install all your
software all over again, due to too much corruption in the filesystems.
Electrical interruptions can sometime do some nasty things to data on disk drives.

Looked for but Not found

Similar Messages

Maybe you are looking for