Lookin for a NMS such as CiscoWorks network management software

hi everybody
I 'm lookin' for CiscoWorks network management software or equivalent on support section on cisco website support.
I want it to configure snmp on my catalyst 2950 and get some results likes input and output traffic rate on my catalyst, all trafic generated by equipment connected on my catalyst with some detailes likes equipement ip, input and output trafic rate, graph and son on.
I don't find it on the cisco website so I think they'll have an equivalent on the website but I don't know.
If someone has an idea or a link...
Thank you

Hi Serge,
Are looking to obtain software that you can install and use, or are you looking for documentation for software you already have?
One type of network management software freely available is MRTG, it will produce graphs of network traffic, a very handy utility:
http://www.mrtg.com/
Another freeware NMS, if I'm not mistaken, is Nagios:
http://www.nagios.org/products/nagiospowered/
We do have some software available for device configuration also (depending on the device). Perhaps the Cisco Netowrk Assistant? You can navigate there from http://www.cisco.com . Choose Support, and under Otion 2, choose "Download Software". Then select "Netowrk Management", "Routing and Switching Management", and "Cisco Network Assistant". Follow the navigation, and you should be able to have a tool to help configure your devices.
Cheers,
Curtis

Similar Messages

Cisco Network Management software options

Hi,
I wanted to see if anyone can give me a quick breakdown on the differences between some Network Management software titles. I dont know when you would use each one or what the limitations are of each.
CNA - Cisco Network Assistant
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps5931/product_data_sheet0900aecd8068820a.html
http://www.cisco.com/en/US/docs/net_mgmt/cisco_network_assistant/version5_0/release/notes/OL12210a.html
CCP - Cisco Config Professional
http://www.cisco.com/en/US/prod/collateral/routers/ps9422/data_sheet_c78_462210.html
http://www.cisco.com/en/US/docs/net_mgmt/cisco_configuration_professional/v2_7/rlsnts/ccp_v27_rel_notes.html
CCA - Cisco Config Assistant
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps7256/ps7287/data_sheet_c78-682273.html
http://www.cisco.com/en/US/docs/net_mgmt/cisco_configuration_assistant/version3_2_1/release/Notes/cca_3_2_1_relnotes.html
Cisco Prime LMS (are their different versions or products here?)
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps11200/data_sheet_c78-697479.html
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.2.3/release/notes/lms4_2_3_release_notes.html
CiscoWorks (depreciated? Now Prime?)
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/data_sheet_c78-534877.html
I have been looking over the realease notes for each product trying to draw some conclusion on which titles support or dont support certain products.
Has anyone used these and can give a quick answer for when you would use each and if there are any gotchas or limits to watch out for?
It looks like Prime is a paid for product but will any of the free solutions (CNA, CCP, CCA) work with all enterprise level products (2950, 2960, 3560, 3750, 4948, 4900 4500 switches and 1800, 1900, 2800, 2900, 3800, 3900 routers) or do you have to use Prime to get a product that will mange these devices?
Thank you in advance.

Hi Marvin,
i am currently try to explore cisco prime Infra 1.3 and facing some problem.
1 : i have set the admin password at startup config but this password is not working(i am pretty sure that i have enter the same password)
2: Can i change the prime lan infra clock setting from it,s GUI
3: i am not able to see the end client assosiate to a cisco switch(C3750 )
4: i want to know can i use cisco infra to monitor broadcast on a switch port level.(suppose switch 1's port 10 client making broadcast ,can i monitor that)
is there is any videos avialable for cisco prime infra 1.2/1.3 .
Thanks,
Prashant

Please recommend network management software

Hello!
I need help to find some network management software that will work with our switches. I'm running a network that has Cisco/Linksys managed switches:
10xSLM2008,
5xSRW208,
2xSRW2008MP,
1xSF 300-08
I was hoping there is management software (not the webview/web browser thing), that could do these things (in preferred order):
- connect to these by SNMP (or similar) to show me a little statistics on each port on each switch, along with connectivity between these switches.
- let me know which port knows which mac addresses, and maybe also the IP addresses of these.
- let me know which mac addresses uses most bandwidth
- ban a mac address
I'd be happy if anybody could give me an advice on what software to buy.
Best regards,
Lars E Fodnes

It can't ban a MAC address, but that is what dot1x/port security is for. I'm not sure if your switches support it, but you can look into that from the switch standpoint.

Cisco network management software's/application's in a big picture

Hi,
I am looking for a document or slide which can help me understand the various Cisco network management software umbrella.
I mean there are so many Cisco network management software, one big picture of all the application will help me understand.
Thanks
Mudassir

Hi,
I am looking for a document or slide which can help me understand the various Cisco network management software umbrella.
I mean there are so many Cisco network management software, one big picture of all the application will help me understand.
Thanks
Mudassir

Network Management Software

Hi All,
got several switches on LAN(6509,2950,2960,3550,3560,2550) & serveral routerz on the WAN, i am looking for a network monitoring tool where i should get alert over email & sms, so can any one suggest which is the best tool?

Hello Anandana,
There are many tools out there. I give you two options, one published under the GPL license:
Just For Fun Network Management System -- http://www.jffnms.org
and a commercial product from Cisco:
CiscoWorks LAN Management Solution 2.5 -- http://www.cisco.com/en/US/products/sw/cscowork/ps2425/index.html
If you have questions regarding CiscoWorks you can post them in the network management section section.
HTH
--Leon
* Please rate posts.

Wireless network management software for iMac?

Hello all
I am running a home WLAN via a cable modem + Belkin N Wireless Router, with my Intel iMAc wired to the router, and 3 PC's with wireless connections.
All running perfectly!
However - I would like to be able to control the network from the Mac, specifically as follows:
- have visibility of all machines connected at any time
- have visibility of the bandwidth consumption of each machine
- be able to "bandwidth throttle" each machine, ie allocate maximum "shares of bandwidth"
- be able to schedule bandwidth throttling per machine, as well as set manually
Is there any software that does this for the Mac, and that is recommended by users on this board?
Note that I have zero understanding of router functionality and therefore accept that this question may or may not make sense!
Thanks in advance for any help / recommendations

Rick - thanks for the reply, much appreciated.
Yes there are controls in the router to manage internet access for each client on the network but they are simply of the yes / no variety - allowing the admin to just turn access on or off.
My teenage kids use Internet access for a variety of (legitimate!) purposes but my ISP (Virgin Media) imposes automatic "traffic management" bandwidth throttle on my connection (from 10 MBPS to 1 MBPS for 5 hours) if our overall bandwidth consumption exceeds 1,200 MB between 4pm and 9pm (http://allyours.virginmedia.com/html/internet/traffic.html)
Needless to say, getting my kids to monitor and limit their own traffic during this period is impossible - so I would like to be able to automate the policing of traffic levels fairly amongst 3 concurrent users during the trigger time slot 4pm - 9pm without having to resort to a blunt "on/off" policy.
From your reply I guess that my router provider (Belkin) would be the best source of information regarding available software for this - assuming it exists ...?
Thanks
CJE

Network Management Software for MF4890dw?

We recently installed a bunch of MF4890dw multifunction printer/copier/scanners on our office. Is there an easy way to manage these over the network? I know I can access each one individually through its IP address, but the amount of control is limited. For most things, I have to physically push the buttons on the front panel. I would like to be able to administer them all centrally through a utility like HP's Web JetAdmin.
Also, how do I add a scanner to a computer (and visa versa), short of reinstalling the software from scratch? Is there a setting I am just missing?
These are very nice devices, but it is frustrating to not have more control.
(Please excuse the cross-post--after I posted under "multifunction" I saw that this issue may be more appropriate here.)

Hi pgreen!
There is no software that would allow an administrator to centrally control multiple units over the network. The imageCLASS units are designed to reduce errors, which is why most functions have to be selected at the printer.
Canon does not currently have a supported software that will allow you to add a scanner to a computer.
I hope this information is helpful to you. If you need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666). Have a good day.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Networking Management Software

Hi,
i have got Cisco 6509,2950,3550 & 3750 switches, i wanted monitor the network traffic on the network, implemented VLAN's also, so is there any software in cisco itself or any other 3rd party software available.?

I have been looking into doing this, too. I found a 3rd party software that looks interesting. It is OpManager from AdventNet. The free one will monitor up to 20 devices. If you need to do more than that you can upgrade to Professional for $795. Here is the URL: http://manageengine.adventnet.com/products/opmanager/

Killer network manager cant enter accurate number

killer network manager on network tab asks to enter values for, in my case, dsl connection speed.
my speed is 10mbits down and 0,5 up
if i enter 0,5 for up and press apply then it rounds on 5 mbit
i can also use arrow keys, to adjust to 0.5 but same thing happens. i can manually enter 1 mbit for upload but thats 2x my speed.
killer network manager asks to enter accurate numbers for best result
mb is gaming 3 h97
my numbers are now 10,00 and 1,00
if i enter 0.50 then it rounds it on 5,00

Hi
i have antivirus but its disabled when installing, as sugested by installer.
i just uninstalled, so i dont have screenshots, but can attach them later.
when entering numbers for upload and download speed in network manager, it is in format 10,00 for 10 mbits, 100,00 for 100mbits etc.
i upgraded killer network software and now i have much bigger problem. if bandwith control is enabled, i cant connect to internet. i saw similar topics on msi forum allready.
i downgraded killer software to 1.1.39.1040 and bandwith control is working normally.
new 1.1.50 and 51 are not working.
right now i have just drivers, with no software.
so, there are two problems.
1) 1.1.50 and later not working at all with bandwith control enabled
2) cant enter 0.50 mbits in upload speed -- looks like software is accepting only 1, 2, 3 mbits values, and not 0.50, 1.50 -- which is weird because software is obviusly designed for that because you dont enter 10 mbits as 10, but as 10,00, so its logically to assume that 0.50 should work
please tell me do you still need those screenshots, i will upload them later today...
please, prepare drivers only (without killer software) for windows 10

Unified Communications Network Management Licensing

Hi,
i have purchased all 4 VOIP Network Management Software (CUOM, CUSM, ecc...) with their PAK. Now i'm going to register the 4 PAK, but i have a doubt: Cisco requires the MAC address of the server that hosts the Management Software. I have installed the Cisco software on 2 HP dl380 servers with 4 NIC's and, on each server, i configured 2 NIC's in load balance (with embedded HP network software): the other 2 NIC's are disconnected.
Is there someone that can tell me which MAC address i must provide to Cisco PAK registration ?
Thank you,
Roberto

Interesting question. When you configured the network team, the MAC address of one of the physical interfaces was grabbed and assigned as the team's primary layer 2 address. If I recall correctly, this would normally be the first (lowest numbered) ethernet interface. But it is likely more complicated than that. But, the point is I would lean to using the mac address reported for the team by the network configuration utility (NCU).
A good doc/pdf on the topic: http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01415139%2Fc01415139.pdf
HTH.
Regards,
Bill
Please remember to rate helpful posts.

In a future version of ibook author would be very useful to provide for the creation of shared content online. Teachers can collaborate on the creation of a text. Very useful for teachers to collaborate in the network. sharing sharing sharing

in a future version of ibook author would be very useful to provide for the creation of shared content online.
Teachers can collaborate on the creation of a text. Very useful for teachers to collaborate in the network. sharing sharing sharing

As always, feel free to use the 'Provide iBooks Author Feedback' menu item for features you'd like added in the future, etc.
http://www.apple.com/feedback/ibooks-author.html

I am unable to download the update for my ipod.."the network connection has timed out". my internet is working fine, i have the latest iTunes..whats going on?

i am unable to download the update for my ipod.."the network connection has timed out". my internet is working fine, i have the latest iTunes..whats going on?

Temporarily disable/turn off your anti-virus and firewall software and try the download again.
Stedman

When trying to create connection using Contribute 6.5, get error message "Unknown error. Please see the log for detail." The log says "Network connection timed out." What do I do now?

Have been using Contribute 6.5, and earlier versions, for years with Hostway without any problems. All of a sudden I cannot create a connection to our website. Tried to chat with Adobe a twice now and got no help. Yesterday they started a chat with me, then ended the session without any communication! My problem has been going on for several weeks now. I uninstalled Contribute, downloaded and installed again, but it did not help. Hostway had me connect with Zilla and everything worked fine. So, they say the problem is with Adobe. The last attempt ended with "Unknown error. Please see the log for detail." The log says "Network operation timed out." Does anyone have any suggestions?

Hi There,
Can you please try using any other Internet connection outside your company's network and see if it is working? Alternatively, Can you please try the below settings from the Advanced... Menu while creating the connection using FTP details and try to create the connection again:
Regards,
Mayank

Mock RFP for SUN network management tool, desperate 4 help, just need specs

OK, I have a project that in essence is a mock Request for Proposal (RFP), I play as an intern, & our instructor roleplays the manager we need to convince. The different network management tools that were available were for example; HP Openview, Cisco Works, Sniffer....& I of course chose SunNet. We need to gather information on the tool, then turn around & design a relatively simple network from the specs that were given, & finally discuss how the management tool's abilities could benefit the (mock) company...power point presentation & all.
Here it is from the homework sheet given to us...."These products will need to be useful in a 5000 node network that has four main locations that are primarily Ethernet. There is a legacy 100 nodes of Token Ring attached to a mainframe. Cisco or Foundry routers connect the Four main locations, with swiches employed. Other connections to these sites are done via DSL or ISDN. Additional considerations are wireless communications, VOIP & Content delivery systems.
I know this is a lot & I'm not asking for someone to do all this for me, just simply provide any information you know about Enterprise management tools 2.0 or 3.0,or anything you may feel better suits my needs, as the links I have surfed about them give little to nothing about specifics that I need to make any argument. If you have any links send them...if you have anyting in hard copy I will pay for postage... I need to get this done & have little time as I go to school & work full time at Motorola (but only as a contractor), so I'm starting to choke & need help....any u can give is so very appreciated....& sorry to make this request a publishable novel here on the board, but thats what it is. Thanks again......Mark

A good solution. Liked it very much. Can you please make it a technet blog for others.
[email protected]

Movement type for GI of material reserved from Network not allowed

Hi Experts,
Hope all are doing well.
I am facing a problem in PS, I have the following scenario.
I have some material in a storage location say 1010 - project storage location.
I want to use that material for some project. I have created a reservation from the Network for an activity 0010 with Procurement indicator - Reservation Plan Stock and Item category L.
After this saved the network, system generated reservation number.
I want to issue the material against this reservation from the Project Storage Location. (its not marked as Project Stock)
When I am trying from MIGO system says the material is not maintained for Q i.e., Project Stock.
I checked the movement type it is 281 Q, GI Network from Project, where as I want the Movement type 221 GI for Project from own.
The Movement type field in the Where tab of MIGO screen is in grat mode. So I cannot change that field.
Please tell me how can I issue the material from a storage location to the project for the reservation created from the network.
I am able to issue the material in case I am creating a manual reservation through MB21 with movement type 221.
Please guide me on this.
Thanks and Regards

First yu will have to bring that much qty to project stock for that WBS element by MVT type 415 vide transfer posting. Then you can issue that qty. against the desired reservation.
I hope this solved your problem
Regards.
Sanjay Bapat

Lookin for a NMS such as CiscoWorks network management software

Similar Messages

Maybe you are looking for