Looking at FOCUS POINTS changes Time and Date

When I select VIEW FOCUS POINTS it changes the Time and Date information in the Metadata. I have seen it happen twice now. The images were taken with a Nikon D90 while in Australia. The first time that I noticed this I was in Hawaii and just looking at the FOCUS POINTS changed the Date and Time to Hawaii time. It happened again in Maryland and the time zone was changed to Eastern Daylight Time. To put the images back in the proper place I have had to change the DATE and TIME.
Has anyone seen this?
Roger

Thanks Tony,
Did you try this:
Shoot a photo with your camera set to your local time.
Import into your Mac set to the same local time.
Quit Aperture
Restart
Set the time on your Mac to another time zone.
Open Aperture.
Open the photo.
View the Focus Points
Then see if the time metadata is changed.
Mine changes and the place of the photo in the line-up of my folder changes.
It still does it after I updated to Aperture 3.0.3 from the 3.0
I know this is a lot of steps in the test process, but this is how it happens for me.
If this doesn't work I'll have to look into a new Nikon for you and a flight to Hawaii.
Cheers,
Roger

Similar Messages

IPhoto change time and date does not work with Flickr

Hello everyone,
In my iPhoto librairies, I do change my photo date and time to set them we they were actually taken. Here, I'm refering especially to photos which are:
* scanned photo
* stiched photo
The issue is:
When I share these photo on Flickr, Flickr sort them with the previous date time setting, even if I have selected to change the original file in iPhoto.
So it is painful to end up seeing that all the work done on iPhoto is not reflected elsewhere.
This issue can only be in iPhoto as the old date time should be swapped with the new one.
Let me know when the fixed will be implemented so I stop loosing precious time editing photos!
Regards,
Francois

I have an Access Database created with Access 2010 installed on a machine running Windows 8 using the Access 2010 Runtime code. For the most part the database works but all reports that require a date in the header come out with ##error. Works fine
with full access on any other machine. Just this one were we are using Runtime. Any ideas?
Make sure you don't have Date used as a Field Name, as it is a Reserved Word in Access and can cause unpredictable behavior.
Also make sure you have compiled the VBA code, before using the Runtime version.
Have error handling in place, to capture errors in your DB.
Hope these pointers help,
Daniel van den Berg | Washington, USA | "Anticipate the difficult by managing the easy"
Please vote an answer helpful if they helped. Please mark an answer(s) as an answer when your question is being answered.

Has anyone else had issues with changing how the time and date look on the status menu in Mavericks?

I'm trying to make it so the year displays, but haven't been able to figure out how to change that. I have the Day of the Week, Month, Day and Time only and I haven't been able to figure out how to do that in the Date & Time or the Language & Region Settings.

There is no option in System Preferences. However, it may be possible to set it with a "defaults write" command.
This page shows how to set the time and date format in the Terminal, but doesn't show whether you can add the year.
http://apple.stackexchange.com/questions/75116/i-want-to-change-clock-from-12h-t o-24h-mode-via-terminal
If you can find a description of Apple's date format code that includes the year, then it may be possible. Or not.
I'm guessing Apple thinks only Time Travellers need to ask what year it is...

RE: Time and Date Changed by itself

The date and time will change to the wrong one automatically especially after the batt died. This repeated itself regardless on how many times i readjust the time and date to the right one. Someone please help me.

I had the same problem today. I also have the iPod 4g, no problems up until today. First make sure you calender is set to "Gregorian, you can do this by going to Settings --> General --> International, and you will see the calender options, mark Gregorian. Still didn't work? Try this: I experimented a little, and what i did was: First, I went to Settings --> General --> Date and Time --> Set Date & Time (before doing this make sure you're in the correct time zone) and here you can change the time and date. But, if it changes automatically, go to the date, and you may have the same problem here, but here's what i did. I couldn't change the month, or day, but i could change the year. Change the year to 2011, and then all the other options should come up. Hope this helped!

How can I change the language of the time and date and numbers?

Hey
I bought the iPhone 5 and when I setted the settings I chose the country where I live now but the time and date and other numbers because in the language of the country and not in the language that I chose which Is english
so how can I change them?

Go to settings >> general and checkout keyboard, international and date & time.

My iphone 3gs has started showing the wrong time and date. All was fine until this afternoon when it changed. My apps have the right time and date. However the world clock is wrong. I have to turn off the automatic time setting to get the right time.

My iphone is showing the wrong time and date. All was well until sometime this afternoon when it changed... to Nov 5 (2 days prior to today), and about 9 hours and some minutes before the actual time. The world clock for my time zone shows the same wrong date and time. My calender shows the same wrong date and time. The phone can not find my time zone any more. The only fix I found was to turn off the automatic setting for time. What is happening? Ideas?

just sorted mine went to
settings-mail,contacts,calender-timezone support
then turned it off then on tapped time zone and typed london
this did sort mine

Time and date settings change when phone is powered down (not shut off)..

I recently installed the iOS 8 update and immediately noticed that the time and date settings would change when I powered down my iPhone. I did not turn off my phone, only clicked the button to power down or save power. I have tried all the fixes, suggestions, etc., but I am still having issues. In the power down state, I am able to receive phone calls or texts but when I go into my phone, the time and date will be off. It stops from the moment I click the button to power down the phone. Please don't get this confused with turning off the phone completely. This happens when I click the button for power down or power save, however it is described.
So, how do I fix it? Is the app/software for the clock the problem? Is the battery distribution the problem? For some reason, in power down mode, the clock is not receiving constant power in order to keep accurate time. It stops the moment I click the button. Any suggestions? fixes, etc. I could try. Apple support techs were absolutely no help what-so-ever.

This sounds exactly like what is going on with my phone, http://www.idownloadblog.com/2012/10/19/iphone-5-date-time-glitch/

In the advanced tab of languages and Region the time and date formats will not change

For a certian Application I am using I need to change the format of the Time and Date. I had no problems in Mountain Lion. In the advanced tab of languages and Region the time and date formats will not change. I need the date format to read as 01/01/14 and time format to read 13:00. As I said this was easily done in Mountain Lion and all previous Apple OS. I suspect it's an issue with in the OS.

You're right, it has been that way for a long time. I've never bothered reporting it as a bug since it's simple enough to deal with, but reporting it would be a reasonable thing to do.

Ipod touch always changes the time and date when synced

Since I got my touch, even before any updates etc, every time I sync it the time and date changes, usually back about a week or so. Anyone else got this problem or any solution as its really annoying me. A cutting edge bit of kit that has practically every function that works so well and the clock and calendar cant keep time? weird....

Not true in all cases, I updated to 2.0 and had 2 problems: One App had a Bug *NOT Apple`s fault*, and the second was another App ( again, not Apples fault ) that went back to home screen after opening. This was solved by a simple reset ( I have the first batch of Touches, 16 gb ). And the battery thing, I haven`t noticed it at all, I have an almost full charge, and have been using it for 4 days, never shut it down, only sleep mode when not in use.

HT1551 My appletv is properly connected to wireless network, everything looks all right but it can't adjust the time and date. As a result it doesn't work.

My appletv is properly connected to wireless network, everything looks all right but it can't adjust the time and date. As a result it doesn't work.

Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router.
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

Time and Date keeps changing

Every time I connect my ipod touch 2.1.1 the date and time keeps changing. is it a glitch? i also tried restoring my ipod but it didnt help, so please fix this

Thanks. This solves the time and date issue. But I still have a problem when I do the following: Settings>General>Time & Date, then the main screen (with all of the icons) is displayed, I never see the time, date screen, it goes back after about 1 second to main screen The same thing happens when I do the following: Settings>Mail, Contacts, Calendar>I then scroll to the bottom of the page and I get the main page again. I never get to touch on contacts or calendar, only mail. Please help.

Can I change incorrect time and date with

Hello,
I used my digital camera in a different time zone and forgot to set it accordingly. Now a bunch of photos have the incorrect time and date. Can I use Photoshop CS4 (11.0.2) to change this? I only found instructions on the Internet for Elements, which I do not have.
Windows Live Photogallery was only mildly successful. In the Windows 7 Explorer the date is shown correctly, but when I go to open the file in Adobe Photoshop, the old, incorrect date is shown. That's why I hoped that I could change this for good with Photoshop.
Thanks in advance!
Aiiyana

There are several dates in the metadata. THe date shot is set by the camera and I know that you can not change that in Bridge. There are programs out there on the web that will do it.

When changing appointment on outlook after time they back on original time and date

I have user that when makes a change to a meeting and sends the update to the recipients, they get the new meeting request and it updates on their calendar with the correct time and date. Then for
a brief time or past day the senders calendar will show the change then disappear and the original time and date pop back up again on all users get the meeting.
Time zone on all pc's same, date/hour correctly.
All with windows 7 + Outlook 2010 (+ sp1, full update).
I have Exchange 2013
any help and tips will be appreciate
Thank's

Hi Rdanny,
Do you mean both Organizer and Participants' meeting back on original time and date?
Does the Organizer give others delegation permission?
Does this issue always occur or just once?
How about changing time in OWA? If you didn't try it, please try to change the meeting time in OWA for testing.
If in OWA, this issue disappeared, it seems an issue on the Outlook client side.
I suggest run Outlook under safe mode to avoid some AVs and add-ins.
I suggest try to re-create the Organizer's profile to refresh the caches.
Also try to check whether there is any related error message in the App Log.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Random Clock Time and Date Changes

My clock time and date changes randomly. I have reset the iPhone and updated its software but it still changes. Can anyone help?

That just happened to me too! It started yesterday April 27 and did it today too. I think it changes around like 1pm-1:15pm. In order to get it to change back to the right time, I just turn off my phone then turn it back on. But that doesn't fix the problem. I don't know why its doing this! :[

HT5706 My Apple TV is frozen on the time and date setting and then it goes to the screen saver I tried changing the batteries on the remote and it still doesn't make a difference someone help

My Apple TV is frozen on the time and date setting and then it goes to the screen saver I tried changing the batteries on the remote and it still doesn't make a difference someone help...has anyone else had these problems?

Hi i ran into the same problem Ithoght it was the control, i changed the batteries the the control, and stil did not work, in the same connection (network and everything) i installed a new one and it worked perfectly, i can deduct the unit is nit working properly

Looking at FOCUS POINTS changes Time and Date

Similar Messages

Maybe you are looking for