Looking at version management of a Program report
Hi gurus,
can you please explain, why does the older version is active and flagged than the current version?
Points will be given later.
At the top of the version management screen you always see the active version. The date behind that version is the date that version was activated.
e.g. 10.Dec.2007
Now you decide a week later to release and transport your request. Once you release the request the (at that point newest version) is 'closed'.
e.g. You started doing changes in the program on 5.Dec.2007 which created a new version 00005.
You released the request on 17.Dec.2007 which closed the version 00005.
The display is as follows:
active version: xxxxxxxxx 10.dec.2007
00005 yyyyyyyyy 17.Dec.2007
00004 ........
In this case the active version is older than the current version.
Hope that explains it,
Michael
Similar Messages
-
Version Management of ABAP program gives the wrong request number
Hi,
When i click on Utilities-->Version Management for any program it is not giving me the latest request number as the version info. My system is ECC 6.0 and the kernel level is 175. Please help.
Regards,
SrideviDid you do user master with variants import after your system copy in your development?
Did the program created in Production and moved to development or from dev to prod?
Which system has the latest timestamp of the transport request?
once you identified the system,which has the latest change...check if the transport has been moved to the other system.
Note:
Its a wrong practice to rebuild your development with your production.
You development has already lost all the version history and you may not get past history.
Its most like a coplicated scenarion than the traditional one. -
Version management for a program
Hello Experts,
can someone please help by suggesting a table for version management where all the versions are stored for the given Z-program.
regards,
YK
Edited by: 1234_abcd on Dec 29, 2010 11:47 AMHi Keshav,
thanks for the help but SE02, as the system says "does not exist"
please revert back.
and when I am using the E701, the no of request I am getting for the program is different in no then wat I m getting when I am checking the program, can someone please through some light on that.
regards,
YK -
Version Management for Oracle forms/Reports/plSQL
We currently use Serena VM (PVCS)
Looking to migrate to an alternate one.
Wondered what people used if htey migrated etc?
SubVersion seems the obvious choice but thought id ask the people in same position as us development wise.
Ideally a web based solution would be best rather than a local, but not seen many of them.SubVersion seems the obvious choice but thought id ask the people in same position as us development wise.There are other Systems, like GIT: http://en.wikipedia.org/wiki/Git_%28software%29
The main difference to subversion is that it is distributed on each development PC. We didn't need this feature as we are hardly developing software outside our company building, so subversion was and still is very suitable for us.
Ideally a web based solution would be best rather than a local, but not seen many of them.What do you mean? Apache is perfectly capable for subversion with mod_dav_svn: http://svnbook.red-bean.com/en/1.7/svn.ref.mod_dav_svn.conf.html
In conjunction with .htaccess authentication this is setup in 10 minutes on a debian/ubuntu server. CollabNet also provides you with a complete bundle: http://www.collab.net/downloads/subversion
If you plan on using windows there is another solution: http://www.visualsvn.com/server/
cheers -
Request not visible in the version management of a Report Program
Hi,
We Imported an external request into the SAP System.
The request was imported successfully and a program already existing is updated with that request,
The problem is that the request number is not visible in the Version Management of the Report Program, but the other Programs have the request number visible in the version management, we could not find the request number in that particular program
We tried reimporting the request but the request is not visible.
RegardsCheck the transport logs and see if there are any erros/warnings.
-
Pl provide program/report-allows us to see old comments made by the Manager
Hi Sap Gurus
In SAP, report SWI5 gives us the workflow of a manager, to see comments if manager rejected a claim.
Once claim gets settled, the workflow comments in SWI5 disappear. Which report in SAP will bring up logged workflow comments, from past claims.
An example, emp 123456, claim 5102535278 Shan, had this claim rejected. So business went in PR05,Settled the claim, now when you go into SWI5, to look at the managers workflow for that claim, the comments are gone.
Please can someone provide a program/report that allows us to see old comments made by the manager.
Your help really appriciated..
Thankshi thanks for reply,
we are generating the reports in oracle and accessing the reports from the oracle secure enterprise search. so which user logs in to the oracle SES, and if we view any report he can view only few pages in the report, to which he is authorised to view.
thanks you,
swapna soni -
Report about Version Management of PO
Hello,
Version Management is active in my system.
Is there any standard report that shows any information about the different versions of the POs?
I need a report which atleast shows the number of versions that exist for a PO.
Any help appreciated.
ThanksHi,
Use EKKO table and field name as REVNO with this you can go for Z development report. -
what version of the following programs (LasPass, Kaspersky anti Virus, Internet Download Manager) are compatible with Mozilla Firefox 15.0.1?
Lastpass 2.0.0, Kaspersky 2012, 2013 and Internet Download Manager 6.12 build 21 are fully compatible with Firefox 15. If you are having any issue, let us know :)
-
Problem description:
Slow macbook pro
EtreCheck version: 2.1.2 (105)
Report generated December 12, 2014 at 9:28:15 AM EST
Hardware Information: ℹ️
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 5 days 1:56:44
Disk Information: ℹ️
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 498.88 GB (50.81 GB free)
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.Logitech.Control Center.HID Driver (2.6.0) [Support]
[not loaded] com.palm.ClassicNotSeizeDriver (3.2.1) [Support]
[not loaded] com.wacom.kext.pentablet (5.0.5) [Support]
Startup Items: ℹ️
HP IO: Path: /Library/StartupItems/HP IO
Parallels: Path: /Library/StartupItems/Parallels
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[failed] com.apple.AirPlayUIAgent.plist [Details]
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.cmfsyncagent.plist [Details]
[failed] com.apple.coreservices.appleid.authentication.plist [Details]
[failed] com.apple.EscrowSecurityAlert.plist [Details]
[failed] com.apple.icloud.fmfd.plist
[failed] com.apple.lookupd.plist
[failed] com.apple.sbd.plist [Details]
[failed] com.apple.security.cloudkeychainproxy.plist
[failed] com.apple.spindump_agent.plist [Details]
Problem System Launch Daemons: ℹ️
[failed] com.apple.AssetCacheLocatorService.plist [Details]
[failed] com.apple.awdd.plist
[failed] com.apple.ctkd.plist
[failed] com.apple.GSSCred.plist
[failed] com.apple.icloud.findmydeviced.plist
[failed] com.apple.ifdreader.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.periodic-daily.plist [Details]
[failed] com.apple.periodic-weekly.plist [Details]
[failed] com.apple.softwareupdate_download_service.plist [Details]
[failed] com.apple.spindump.plist [Details]
[failed] com.apple.tccd.system.plist [Details]
[failed] com.apple.wdhelper.plist
[failed] com.apple.xpc.smd.plist [Details]
[failed] org.cups.cupsd.plist [Details]
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.hp.help.tocgenerator.plist [Support]
[running] com.wacom.pentablet.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[running] com.fitbit.galileod.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
User Launch Agents: ℹ️
[running] com.spotify.webhelper.plist [Support]
User Login Items: ℹ️
iTunesHelper UNKNOWN (missing value)
Microsoft AU Daemon Application (/Applications/Microsoft AutoUpdate.app/Contents/MacOS/Microsoft AU Daemon.app)
Adobe Update Manager UNKNOWN (missing value)
Microsoft Excel Application (/Applications/Microsoft Office 2004/Microsoft Excel)
SpeechSynthesisServer Application (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
Inspiration 8 Application (/Applications/Inspiration 8/Inspiration 8.app)
Fitbit Connect Menubar Helper Application (/Applications/Fitbit Connect.app/Contents/MacOS/Fitbit Connect Menubar Helper.app)
apple-scc-20141117-121931 UNKNOWN (missing value)
HP Scheduler Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
HP Product Research Application (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 2.1.0.33 [Support]
FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
AdobePDFViewer: Version: 8.1.0 [Support]
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.1.0 [Support]
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
iPhotoPhotocast: Version: 7.0 - SDK 10.7
User internet Plug-ins: ℹ️
Unity Player: Version: UnityPlayer version 1.6.2 [Support]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Flip4Mac WMV [Support]
Logitech Control Center [Support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 448.07 GB
Destinations:
Data [Network]
Total size: 2.00 TB
Total number of backups: 59
Oldest backup: 2014-03-12 12:51:24 +0000
Last backup: 2014-12-05 16:47:01 +0000
Size of backup disk: Excellent
Backup size 2.00 TB > (Disk size 498.88 GB X 3)
Top Processes by CPU: ℹ️
3% hidd
0% Fitbit Connect Menubar Helper
0% WindowServer
0% fontd
0% syslogd
Top Processes by Memory: ℹ️
206 MB iPhoto
172 MB Mail
64 MB Safari
60 MB mds
52 MB com.apple.WebKit.WebContent
Virtual Memory Information: ℹ️
49 MB Free RAM
832 MB Active RAM
796 MB Inactive RAM
1.41 GB Wired RAM
45.93 GB Page-ins
1.06 GB Page-outs
Diagnostics Information: ℹ️Macintosh HD (disk1) / : 498.88 GB (50.81 GB free)
You have only about 10 percent free drive space left. 50gB is enough to run the computer but, if it gets much smaller, that can slow how Virtual Memory (VM) works as the system has to more carefully search the remaining space for qualified blocks to which to write data.
Adding RAM will reduce the writes-to-disk by VM but you should probably consider a little holiday disk cleaning of stuff you no longer use.
This concerns me:
User Login Items: ℹ️
iTunesHelper UNKNOWN (missing value)
Microsoft AU Daemon Application (/Applications/Microsoft AutoUpdate.app/Contents/MacOS/Microsoft AU Daemon.app)
Adobe Update Manager UNKNOWN (missing value)
Microsoft Excel Application (/Applications/Microsoft Office 2004/Microsoft Excel)
SpeechSynthesisServer Application (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
Inspiration 8 Application (/Applications/Inspiration 8/Inspiration 8.app)
Fitbit Connect Menubar Helper Application (/Applications/Fitbit Connect.app/Contents/MacOS/Fitbit Connect Menubar Helper.app)
apple-scc-20141117-121931 UNKNOWN (missing value)
HP Scheduler Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
HP Product Research Application (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
That is a LOT of log-in items for a compute with 4GB RAM. Some are hard to avoid but Excel is a big program that can be easily launched from the Dock. I don't know what "Inspiration 8" is but likely the same advice will apply. -
Issue with Cash Management and liquidity forecast report
Hello folks,
I am working with cash management and liquidity forecast reports. While running the report for Cash management, as I drill down to planning levels and induvidual GL accounts for the bank accounts, the figures for GL acounts in report does not tally with actual GL balances. As I drill down to last level, it shows the GL balance display which is different from the values in the report. Can anyone tell me why it does not pick up certain values. I find that certain document type "DZ" values are not picked up by the report. Any suggestions?
Also, I would like to know is there any way to cross check the values in Liquidity forecast report for sales orders, purchase orders and requisitons through any other report in MM and SD. Would appreciate if someone can respond to mu query.
Thanks in advance,
-NK-In se38, look for programs starting with RFFD*; there are a few for reconciliation of cash management with SD/MM/GL etc.
-
PO version management - view history version
Hi expert,
I'm using PO version management together with change PO output.
1. Is there a way to pre-view or re-print a certain history version of the PO output? currently only the last version can be previewed and I got error message when I try to reprint hisotory version (no printed relevant changes).
2. When I change the PO, a new version is not created until I save the PO. I have to come to the change mode again to mark it "complete". Is there a way to have the new version available before save, so I can make my changes and mark it completed right way.
3. Is there a standard SAP report shows incompleted PO versions? I need to run it to remind me of the PO's that I still need to work on or to mark completed.
Thanks a lot for your kind help!
Regards,
JullyHi Jully,
You can try the following link :
http://www.sap-img.com/mm001.htm
It is an ABAP program contributed by one of the SAP members, which reports all the changes made in PO and list out the details per document.
Take the help of your ABAP consultant to run for you.
See if it helps.
Best regards
Amit Bakshi -
Version Management in abap coding
Hi Expertise,
There is one report of 2000 lines, by mistake i have added few lines in middle.
That has changed functionality completely which is wrong.
I have to revert it back .
I have tried with Version Management, but that is for program.
Please help me out .
Best Regards,
PriyaranjanHi Priyaranjan,
Please go to version management. There you can see all versions available. Just check the desired version and click on the Retrieve button. It will discard the current changes and will return the earlier version as it is. Hope this might be helpful for you.
Regards,
Anubhab -
Version Management on SAP Script Forms
Hello,
Is there a version management for SAP Script forms
like what we have in ABAP programs?
I need to revert back the old version of my SAP scrip form like what I used to do in an ordinary ABAP program.
Is this possible?
Need your views on this.
Thank you very much,
Jeffrey A. PradoHello Jeffrey,
as far as I know there are just two versions stored in the system, the active one and the one you work on. As long as you do not activate your work, you should be able to track your changes. The other way (which I use) is to save the original version with another name and simply load it back when needed. Since we are working with an old Release I do not how it looks in the "new world".
Greetings,
Sebastian -
Welcome to the BEA WebLogic Server Version 6.0 Beta Program!
Welcome to the BEA WebLogic Server Version 6.0 Beta Program!
We are very excited about this beta program and appreciate your
participation. In the past, our public betas have been very well received
by our developer community. So, we have once again organized a public beta
program to enable everyone to preview our latest release.
We do ask that you follow a few guidelines:
-- There will be no voice, e-mail, or fax support for this beta through the
technical support organization. All questions, bug reports, or comments on
the beta program should be directed to to the WebLogic beta newsgroups at
news://newsgroups.bea.com. These newsgroups are:
weblogic.developer.interest.60beta.transaction
weblogic.support.install.60beta
weblogic.developer.interest.60beta.ejb
weblogic.developer.interest.60beta.clustering
weblogic.developer.interest.60beta.security
weblogic.developer.interest.60beta.jdbc
weblogic.developer.interest.60beta.jms
weblogic.developer.interest.60beta.performance
weblogic.developer.interest.60beta.misc
weblogic.developer.interest.60beta.servlet
weblogic.developer.interest.60beta.jsp
weblogic.developer.interest.60beta.tools
weblogic.developer.interest.60beta.rmi-iiop
weblogic.developer.interest.60beta.management
weblogic.developer.interest.60beta.management.console
weblogic.developer.interest.60beta.management.general_and_jmx
weblogic.developer.interest.60beta.internationalization
weblogic.developer.interest.60beta.xml
weblogic.developer.interest.60beta.jndi
weblogic.developer.interest.60beta.documentation
weblogic.developer.interest.60beta.javamail
-- Please remember that this release is currently beta code. This means that
it should not be put into production deployments until the final release
occurs.
-- It is very likely that this release will contain bugs and errors. This is
the nature of beta code. Please the patient with us as we do our best to fix
any problems that we find. We will do our absolute best to make sure that
your issues are addressed as soon as possible.
-- Please do not post any issues relevant to the beta on the standard
newsgroups also available at news://newsgroups.bea.com.
-- Please use the newsgroup for all communication and do not contact any BEA
employees directly. They have been instructed to direct you to comment only
via the newsgroup.
-- Please review previous posts in the newsgroups before posting. If you
locate a bug or need to ask a question, it is very likely that it will have
been asked before.
-- Please do not post on the newsgroup using hostile or profane language.
Inappropriate posts will be removed and offenders will be blocked from the
beta program.
Thank you again for your support and participation. We very much appreciate
all that you will be doing to make this release of the BEA WebLogic Server
as great as possible.
Michael Girdley
BEA Systems IncWelcome to the BEA WebLogic Server Version 6.0 Beta Program!
We are very excited about this beta program and appreciate your
participation. In the past, our public betas have been very well received
by our developer community. So, we have once again organized a public beta
program to enable everyone to preview our latest release.
We do ask that you follow a few guidelines:
-- There will be no voice, e-mail, or fax support for this beta through the
technical support organization. All questions, bug reports, or comments on
the beta program should be directed to to the WebLogic beta newsgroups at
news://newsgroups.bea.com. These newsgroups are:
weblogic.developer.interest.60beta.transaction
weblogic.support.install.60beta
weblogic.developer.interest.60beta.ejb
weblogic.developer.interest.60beta.clustering
weblogic.developer.interest.60beta.security
weblogic.developer.interest.60beta.jdbc
weblogic.developer.interest.60beta.jms
weblogic.developer.interest.60beta.performance
weblogic.developer.interest.60beta.misc
weblogic.developer.interest.60beta.servlet
weblogic.developer.interest.60beta.jsp
weblogic.developer.interest.60beta.tools
weblogic.developer.interest.60beta.rmi-iiop
weblogic.developer.interest.60beta.management
weblogic.developer.interest.60beta.management.console
weblogic.developer.interest.60beta.management.general_and_jmx
weblogic.developer.interest.60beta.internationalization
weblogic.developer.interest.60beta.xml
weblogic.developer.interest.60beta.jndi
weblogic.developer.interest.60beta.documentation
weblogic.developer.interest.60beta.javamail
-- Please remember that this release is currently beta code. This means that
it should not be put into production deployments until the final release
occurs.
-- It is very likely that this release will contain bugs and errors. This is
the nature of beta code. Please the patient with us as we do our best to fix
any problems that we find. We will do our absolute best to make sure that
your issues are addressed as soon as possible.
-- Please do not post any issues relevant to the beta on the standard
newsgroups also available at news://newsgroups.bea.com.
-- Please use the newsgroup for all communication and do not contact any BEA
employees directly. They have been instructed to direct you to comment only
via the newsgroup.
-- Please review previous posts in the newsgroups before posting. If you
locate a bug or need to ask a question, it is very likely that it will have
been asked before.
-- Please do not post on the newsgroup using hostile or profane language.
Inappropriate posts will be removed and offenders will be blocked from the
beta program.
Thank you again for your support and participation. We very much appreciate
all that you will be doing to make this release of the BEA WebLogic Server
as great as possible.
Michael Girdley
BEA Systems Inc -
Technical upgrade - version management ?
Hi All,
I got a doubt in technical upgrade. My situation is technical upgrade from
3.1h to Ecc6.
I have been provided a list of standard programs generated by SPAU
after reset to original is made.
Since i dont have modification assistance i need to correct using version management only.
For programs i can use version management to compare old and new version and add the missing codes.
Whereas for list of things below how to compare and make the neccessary corrections.
Documentation, Screen, Messages,Report Texts,
Packages,Definition of a Maintenance and Transport Object,Transactions.
Expecting some solution from you all.
Thanks in advance,
Regards,
KameshHi Kamesh,
There will be no versions available for these objects.
U have to compare all these with the old system manually.
1) Messages: check for the attributes ,any changes in attributes of messages.
2) Screens: this is a tedious job, u have to compare the source code also here,u can compare the two screens in se51.Here u have to check for any changes in the earlier version by customer which is not present in ECC 6.
3) Transaction : In se93 in both systems check them manually, GUI support should be enabled in ECC 6
4) Documntation : if it is a function module documentation check for documnetation in se37 for that particular FM in both the systems. Likewise check for all other objects.
5)BADIs have a different method of SPAU adjustment, this does not show any versions too..
Regards,
Vasuki
Maybe you are looking for
-
To date when column is not always a date..
I know how to use the to_date function select to_date('1/1/2011','MM-DD-YY') however there is a varchar column in a table we have that can have a date or string value. I am wondering how I can do a to_date only on data that is a date? I thought perha
-
I like the previous iOS version where I can scroll my new pictures from the top...not from the bottom. After I updated my iPhone 5 to iOS 8.1, I have to start to scroll from the bottom to the top find my older pictures. I have been searching for the
-
Manual document number in User-Defined Object
Hi Experts, I have a user-defined object of document type. I am trying to post a document using the General Service. However, I cannot assign manual document number. There is no handwritten property available. Is it possible to assign manual docum
-
New installation of remiere elements 11 dont start
Click on Premiere icon produces no visible results. Task Manager shows no Premiere tasks. Is there anybody who know this problem and can help me? Thanks Lutz
-
Checkbox control event - URGENT
Hi all, I need to customize a standard page in iProcurement. The requirement is on click of check box few fields should be mandatory and on uncheck of check box the fields shouldn't be mandatory. I have done with making fields mandatory on click of c