Looking for (2) VXI-MIO-64E-1 for purchase

All,
I am currently looking for (2) VXI-MIO-64E-1 multifunction cards for purchase. If you have any cards you wish to sell or know of any cards forsale, please contact me at...
Roger A. Coffmon
Senior Design Engineer, ATE
[email protected]
614-841-5871
Liebert, NA
www.liebert.com
Emerson Network Power
www.gotoemerson.com
"Consider It Solved"

Roger,
Don't have what you are looking for but depending on your VXI controler there may be an alternative for you to consider. If you are using an embedded controler with a PCI expansion slot (such as 872B or 875B)you can always opt to use a PCI Data Acquisition board that meets your needs. The PCI equivalent board to the VXI-MIO-64E-1 is the PCI-6071E. You can find the product specs at the following location - http://sine.ni.com/apps/we/nioc.vp?cid=1042〈=US. This board has the functioanality equivalence with one exception, the onboard memory. So assuming you are not using the onboard memory option for the VXI-MIO-64E-1 you should have both programming and functionality transparancy.
Regards,
Christer

Similar Messages

VXI-MIO-64E-1 in LabWindows/CVI

I am using VXI-MIO-64E-1 module for Data Acquisition of differential Signal of 0-10V. By default Module is configured in -5V to +5V. I have used status = AI_Configure (deviceNumber, chan, inputMode, inputRange, polarity, driveAIS) function for configure module to 0-10V unipoler but still module is taking -5V to +5V not 0-10V. here is LabWindows/CVI code for configuration of analog input module.
    buffer = (short *)malloc ( NUMPOINTS * sizeof(short));
   status = Init_DA_Brds (1, &brd);
   if ( status != 0 )
    MessagePopup("Error","Error in initializing VXI device");
    exit(-1);
   status = SCAN_Setup (1, NUMMODULES, ChannelList, ChannelGain);
   if ( status != 0 )
    MessagePopup("Error","Error in configuring VXI device");
    exit(-1);
   status = DAQ_DB_Config (1, 1);
   status = DAQ_Config (1, 1, 0);
   status = Select_Signal (1, ND_PFI_7, ND_IN_SCAN_IN_PROG, ND_LOW_TO_HIGH);
   if ( status != 0 )
    MessagePopup("Error","Error in Configuring SCAN_START input Line");
    exit(-1);
   InitializeTimer1();
   /* Module 1 Initialization Over */
   /* Module 2 Initialization Starts */
   buffer1 = (short *)malloc ( NUMPOINTS1 * sizeof(short));
   status = Init_DA_Brds (2, &brd);
   if ( status != 0 )
    MessagePopup("Error","Error in initializing VXI device");
    exit(-1);
   status = SCAN_Setup (2, NUMMODULES1, ChannelList, ChannelGain);
   if ( status != 0 )
    MessagePopup("Error","Error in configuring VXI device 2");
    exit(-1);
   status = DAQ_DB_Config (2, 1);
   status = DAQ_Config (2, 1, 0);
   status = AI_Configure (2, -1, 0, 10, 1, 0);
   /* Module 2 Initialization Over */
What mistake i am doing to configure module-2 to 0-10 Volt input range.

Hello Vishnu,
Unfortunately, the VXI-DAQ cards are no longer supported, but you can find information about using them in the manual. The VXI-MIO Series User Manual has details about setting the input range in Chapter 3 on page 3-4.
Good luck with your application!
Meghan
Applications Engineer

Drive VXI-MIO-64E-1 in LabWindows/CVI

I'm integrating a VXI system based NI's VXI-1394 controller in which VXI-MIO-64E-1
was used. My develop envirenment is LabWindows/CVI 5.01. When I use the MIO
card to sample a waveform, the only length of the waveform I can sample is
2048Sa. Then, I insert 2 SIMM with size of 8MB to the MIO card, but it is
useless.
How can I configure and use the onboard Mem of VXI-MIO-64E-1? Could you give
a sample program in CVI?
Thank you very much!

Hello Vishnu,
Unfortunately, the VXI-DAQ cards are no longer supported, but you can find information about using them in the manual. The VXI-MIO Series User Manual has details about setting the input range in Chapter 3 on page 3-4.
Good luck with your application!
Meghan
Applications Engineer

Look for 'Purchase Order' and 'Due date' Tables

Hi Everyone,
iam creating a Form for an automatic payment and i have some difficulties to find the table of these fields :
- Purchase Order (EBELN)
- Due date (NETDT)
Please can u help me?
Regards.

I hope you checked these tables.
I found these on Where-used for your NETDT field, Alos these tables have field BELNR which might intrests you.
Table Fields                     Short descriptn
BWPOS                            Valuations for Open Items
FAEDT                            Due Date for Net Payment
DKKOP                            Balance Audit Trail
NETDT                            Due Date for Net Payment
DKOKP                            Open Item Account Balance Audit Trail
NETDT                            Due Date for Net Payment
DSKOP                            Balance Audit Trail
NETDT                            Due Date for Net Payment
MHND                             Dunning Data
FAEDT                            Due Date for Net Payment
good luck,
ags.

Looking for purchase a SSD drive for my DV7-7212NR but not sure what to buy.

I don't know what will fit in my laptop. Notebooks accept 2.5" drives right? Anything else I should know? I was thinking about getting this drive:
http://www.newegg.com/Product/Product.aspx?Item=N82E16820147163
Good reviews. Good price. Good size for what I need it for.
Does it come with the cable needed to hook it up?
Thanks

Hi,
You need something like this:
http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=498
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Looking for purchase info

Greetings,
I don't know where else to post this,,so forgive my intrusion if that's the case. Question is: Can I find out where I purchased my MacBookPro? I'm in the middle of a nasty IRS audit, and need to give receipt for MBP purchased in 2006. If I supply serial #, can Mac at least tell me where they shipped that unit to? I know it was some big "box store" in Houston..just can't remember where it was! I can't find any other venue to ask this question. Sorry..and thanks.
Dave

If the problem happened during the time that your printer was supposed to be under warranty (Sept 2009-Sep 2010), then you can have HP replace your printer and they will just ask you to email/fax to them the copy of your receipt (receipt can be requested from OM or probably from your bank)
However, since the original factory warranty has expired, then he was right. You need to use the OM extended warranty. There are two types of Extended warranty you can purchase from the local stores. An extended warranty from HP which is called HP Carepack and you're supposed to fill up that HP carepack card and mail it to HP so it will be associated with the printer's serial #. The second type of extended warranty is a store warranty. If the factory warranty has expired and your printer needs to be replaced, it is the local store who's going to replace your printer.
Did you verify with OM if the extended warranty that you have is from HP or was it just their extended service plan? Usually, this two different warranties cause confusions.
---Click KUDOS if you want to say THANKS.

Looking for Labview Examples for At-MIO-16DE-10 and AMUX-64T

looking for examples to record:
Load vs strain and temperature using these two.
Also a quick guide to how to get started. I hav Labview 6i and the card and board. No experience yet.

Greetings,
There are a variety of documents on our website that contain information about using the AMUX-64T with an MIO device. There are also example programs that show how to acquire readings using an MIO device with the AMUX-64T. I have linked to some of better documents below as well as the AT-MIO-16DE-10 and AMUX-64T User Manuals.
AT E Series User Manual
http://digital.ni.com/manuals.nsf/webAdvsearch/6FB4341E8E3080F086256BD000550261?OpenDocument&vid=niwc&node=132100_US
AMUX-64T User Manual
http://digital.ni.com/manuals.nsf/webAdvsearch/AF2CEB4411E9D3DE862567130055EAAC?OpenDocument&vid=niwc&node=132100_US
How do I Address an AMUX-64T with an MIO Board?
http://digital.ni.com/public.nsf/websearch/C6D362737414AD6D862562A80070E694?OpenDocument
Taki
ng Thermocouple Measurements Using the AMUX-64T
http://digital.ni.com/public.nsf/websearch/9D8232DFFE50108F86256DCD005A319B?OpenDocument
I would start with making sure the AT-MIO-16DE-10 is installed and configured correctly. You can used Measurement and Automation Explorer (MAX), which is software that is installed with NI-DAQ, to configure and test the AT-MIO-16DE-10. The AT-MIO-16DE-10 user manual goes through the installation and configuration steps for the device. Then I would attach the AMUX-64T and try to acquire signals. You can use the AMUX-64T user manual and the other linked documents to help you determine how to acquire signals when the AMUX-64T is connected to the AT-MIO-16DE-10.
I hope this helps.
Regards,
Todd D.
NI Applications Engineer

Electrical Engineer with automated test experience looking for job in San Antonio Area

I am an Electrical Engineer with 33 years of experience. Much of my experience involves computer programming with an emphasis on electrical systems, either controlling equipment or automated testing. I have experience in numerous languages, most recently LabView, LabWindows/CVI, and TestStand, but also including 'C', Visual Basic, FORTRAN, and Z80 assembler. I have most recently worked in the MS Windows environment, but I have worked in the UNIX environment as well.
In addition to programming I have done some hardware design and equipment specification. I have done drafting of schematics in Visio, but I also have some experience with AutoCAD. I have written user's manuals and done hardware/software integration. I feel I have a broad range of experience in many areas of engineering and programming. I also feel that my engineering background helps be to understand the needs of the customer and thus be better able to translate those needs into the control or test program they need.
I currently live in San Antonio, Texas and am looking for a job in this area. A job on the south side of Austin might be considered if I could tele-commute or work in my home with occasional trips, eg. weekly, to Austin.

I would like to speak to you about your current work situation and the type of position you may be seeking. Currently, I am looking to hire experienced LabView programmers/Project engineers for a long-term opportunity. The following is a brief job description:
LabView Programmer/Project Engineer
Albuquerque, New Mexico
The company follows the industry with LabVIEW coding techniques. Using standards as old as VXI Plug-n-Play and as new as the parallel loop Event Structure / QueuedState Machine. This code is used as the centerpiece for Test & Measurement systems that span most industries including military/aerospace, biomedical, semiconductor, automotive and telecom.
Candidate will handle LabView integration projects from beginning to end. Will work closely with customers to understand requirements, participate in bid process, manage timelines on projects, perform LabView programming, and handle customer questions and concerns. The position requires 60% programming, 20% hardware design and test, 20% customer interface and project management. Prefer candidates with 7 to 10 years of LabView programming experience.
Ability to get a DoD security clearance required.
Please email me at [email protected] or call Sun Vega 505-342-5013 or 800-222-8406.

Looking for DAQ Hardware

Hello,
I have been using LabView 5.0 for a few years to program, control
& retrieve information from the GPIB bus. I want to get into DAQ
programming. Where I work, we do not have much in the way of DAQ
hardware, so I am going to attempt to purchase what I need to play at
home in my spare time.
Looking for:
** DAQ card, preferably PCI for Windows 98: (PCI-MIO-16E-4 or 10)
** Signal conditioning hardware that will work with the PCI-MIO series
card I am looking for.
Please reply to: [email protected]

Chip,
If you are planning on using a breadboard for experimenting with you'e DAQ
board take a look at http://www.vicsys.com/pcbprods/bbdaqcvt.htm. It is an
inexpensive way to easily connect you're DAQ board to you're breadboard. I
also have some older used DAQ boards for sale at
http://www.vicsys.com/usedbrds/usedbrds.htm if you want to save a few bucks
on you're DAQ board.
Best Regards,
Neal Pederson, President, VI Control Systems
1923 Mendius Lane, Los Alamos, NM 87544
TEL: (505) 662-1461, FAX: (603) 388-4969
[email protected], www.vicsys.com
Chip Henkel wrote in message
news:[email protected]..
> Hello,
> I have been using LabView 5.0 for a few years to program, control
> & retrieve information from the GPIB bus. I want to get int
o DAQ
> programming. Where I work, we do not have much in the way of DAQ
> hardware, so I am going to attempt to purchase what I need to play at
> home in my spare time.
>
> Looking for:
> ** DAQ card, preferably PCI for Windows 98: (PCI-MIO-16E-4 or 10)
>
> ** Signal conditioning hardware that will work with the PCI-MIO series
>
> card I am looking for.
>
> Please reply to: [email protected]
>

Looking for modal analysis software for ground vibration tests

I'm looking for Labview code or compiled program that will work with a NI/VXI data acquistion system and supports modal analysis of ground vibration test data on airplanes. Specifically, based on accelerometers, need to synthesize mode shapes; mode indicator function; stabilization diagram; damping estimation; mode animation; mode overlay (comparison); Modal Assurace Criteria (MAC); plotting.

LabVIEW and our dynamic signal acquisition products, particularly the NI 4472B have been used extensively for acquiring data from GVT on aircraft.
For conducting the analysis that you describe, there are several good solutions from some of our partners. These include MTS I-DEAS, m+p International Smart Office, and Vibrant Technology's ME'Scope. All of these packages directly support the NI 4472B as a front end. MTS recently delivered a system to KARI for a high channel count GVT test that used the NI 4472B as the front end.
MTS is developing a new package based on LabVIEW for doing this type of testing, but won't be available until sometime later.
Kurt Veggeberg, Business Development
National Instruments 512 683 5461 Cell : 512 656-7
361

Movie rentals that I downloaded onto iMac with Lion to do not show up on ATV 2 in menu for computers. Purchased movies show up just fine. What to do or look for?

I have an imac that is running lion and an Apple TV generation 2. I have rented a movie from itunes and it shows up on my imac in Itunes under a rental icon, and will play fine on my computer. However, it does not show up as choice to play on my apple tv. I have homesharing enabled and everything else works fine including purchased movies that are on my imac, but no where does it show rental movies.
What do I look for? What do I do to play the rental movie on my apple tv 2?

Answer to my own question:
Wait until the downloaded rental has completed its download to the imac. This took a long time for me, since it was part of several things that I was downloading at the same time.
Finally, it showed up on my apple tv. Interestingly, I was able to watch much of the movie on my iMac before the movie finished its download and was available to the ATV 2.

Need help to open and look for file by name

Hi,
Im needing help to open a folder and look for a file (.txt) on this directory by his name ... The user ll type the partial name of file , and i need look for this file on the folder , and delete it ....
How can i look for the file by his name ?
Thx =)

Hi ,
Sry ,, let me explain again ... I ll set the name of the files in the follow order ... Name_Serial_date_chanel.sxc ..
The user ll type the serial that he wants delete ...
I already figured out what i need guys .. thx for the help ^^
I used List Directory on advanced IO , to list all .. the Name is the same for all ... then i used Name_ concateneted with Serial(typed)* .. this command serial* ll list all serials equal the typed , in my case , ll exist only one , cuz its a count this serial .Then i pass the path to the delete , and its done !
Thx ^^

Looking for a Darknet/Secure BBS app

I have been a fan of Haxial KDX for the longest time, but due to the bugs, etc., I would like to move on. I'm looking for a secure darknet/bbs styled program that supports chat, filesharing, and of basic user management (who can login, who can't, etc..). I have been asking this question all over the web, and haven't gotten (or found) a single response. Waste has never worked right for me, by the way. I would definitely prefer it to be open source, which is why I thought it best to post here. Please help out, or at least direct me somewhere where I should ask... Thanks.
As an aside, the guy who wrote KDX and Hotline (Adam?? Hinckley) claimed on the Haxial website that he is willing to sell the project. I wouldn't mine purchasing and restarting the KDX Project, but I've been unable to get in contact with him. So...if you are him, or know him, or own the rights to Haxial KDX and all related projects...$$$$$
Last edited by xen0blade (2010-01-12 13:18:15)

I've recently become a big fan of OneSwarm - http://oneswarm.cs.washington.edu - I like that it supports remote access.
But I'm definitely interested to see what this thread brings up!
Last edited by hAyZe (2010-01-11 20:50:45)

Looking for a simple, standalone desktop app for web stats

Well, I see they've changed the forums here again. SIGH.
Anyway, a certain web host has eliminated AWStats from it's shared hosting. So I used Webmaster Tools. And now they've changed, and no longer display the simple visitors and hits. Google Analytics is way too complex for what I need, as are many of the stats programs I've looked into.
I can download the daily Apache log files, that's no problem. Just looking for a small standalone program to import these and show the data like AWStats. Any suggestions? The only other options would be to go to a different web host. Not a big deal overall, but I would rather not deal with the hassle, especially the migrating the database.

Not sure of standalone 'desktop' apps. But check out http://www.openwebanalytics.com/ and Web Analytics in Real Time | Clicky - they're both very intuitive and easy to use with a lot more simplified stats than Google Analytics.

Looking for Video playback app, like a DDR

Hello, I'm looking for a program to cue up and playback quicktime files for live broadcast off of the computers hard drive. Kind of like a DDR but all running on the computer. It needs to have the ability to cue up files based on keystrokes, like 123 enter = playack of 123, and be pretty quick about it.
I found Playbackpro.... at WWW.DTVideolabs.com but I'm looking for some other options.
Thank you.

Unfortuately I cant load the clips into quicktime since it's crashing when I load them..
Just hoping for a light weight app that's sole function is video file inspection

Looking for (2) VXI-MIO-64E-1 for purchase

Similar Messages

Maybe you are looking for