Looking for a BAPI that does the same as /$SYNC

Dear Experts,
Could someone tell me which BAPI resets all buffers, I need one just like running /$SYNC. Thanks in advance.
PS: I use a system for test purpose, not a real one in a company.

Thanks for your answer Markus. I would like to call the t-code $SYNC out of the SAP GUI, because I am using a webservice to measure the memory used in the buffers, which gives me the same as the transaction ST02 (and I want to avoid the SAP GUI effect on memory usage by using ST02 and $SYNC, for the ST02 I have a BAPI, but not for the T-Code).Then I need to reset the buffers to know how much memory is used by some of my webservices.
Do you know a way to use this t-code $SYNC out of the SAP GUI?
PS: I use a system for testing purposes, not a real one in a company. And it's on Unix.
Edited by: raesna1 on Dec 14, 2010 6:12 PM

Similar Messages

Looking for a bapi that gets the list of customers with a credit limit

Hello SAP gurus
I want to know if there is a standard bapi that I can use to find all customers with a credit limit of $10000 and that have exceeded this limit.
Any response/feedback will be highly appreciated.
Tks
Ram

Thanks J@Y,
I had read that discussion about the tables with the info. However, I have an external program that is integrated to SAP sytem (using webservices). The external program when needed has to retrieve the list of customers who have exceeded certain credit limit. So I was wondering if there is any standard BAPI which I can use. Or do I need to write my own BAPI using the tables info that you have indicated.
Tks
Ram

System keeps looking for a 'server' that does not exist. Is says the old name of my Airport Extreme. Clicking it away (4x) it gets through.

System keeps looking for a 'server' that does not exist. Is says the old name of my Airport Extreme. Clicking it away (4x) finally gets through.

Other weirdness to report: my neighbor upstairs appears to have a Linksys router network on channel 6. My AEBS is on channel 1 so there shouldn't be interference... but according to iStumbler sometimes the signal leaps to 64000 (keep in mind my own Airport never tops 60)! Is that potentially the problem?
Might it be possible that your neighbor just acquired a 802.11n (pre-N) wireless router recently?
802.11n effectively increases capacity by doubling the number of Wi-Fi radios and increasing the number of antennas used to push signals out of those radios. 802.11n splits a data frame into multiple pieces. It then transmits these pieces in parallel using multiple radios that are attached to multiple antennas. These antennas blast out signals from virtually the same vantage point – scattering the signals everywhere.
You may find the following ZDNet article interesting: http://blogs.zdnet.com/Ou/?p=247
Even if he did not, and you are on good terms, you might want to ask if he can temporarily turn off his wireless, or, at least, reduce the signal strength to see if that will help in your situation.

Is there an app that does the same as FileMagnet?

Is there an app that does the same as FileMagnet?

iBank is one that has similar capabilities. The have a 30 day free trial. http://www.iggsoftware.com/ibank/

Password cache - for user identity that share the same application server

I have different user identity that share the same application server passwords.
When I create a password cache entry for an an application server I have to be specified the User identity for the application server. Is there a way to indicate multiple User identity in order to avoid to create different entry (one for each user identity)?

No. An SGD user can only have a single username for an application server.
There may be a way to craft a solution:
- create several ENS application server objects pointing to the same real application server
- cache different usernames against each ENS application server
- create multiple, identical application objects, assigning a different application server to each, OR
- create a single application object and assign all the ENS servers to it, along with the "SGD Broker" for dynamic launch.

How to turn off syncing for 2 devices that share the same Apple ID?

Hello, I really need help, my dad and I share the same apple ID and when he updated his phone to iOS 7, my messages autimatically syncs to his phone. So now he can read my imessages, is there a way for me to turn this off? Note that my dad does not live with me and I have no physical access to his phone. Also my phone is the 4 and his is the 4s. Please let me know soon! thank you!

HI. Me and my dad share the same apple id. I just found it out recently since he bought a new apple device ios 8, and all his bookmarks in safari kept on appearing on my ipad and the customer guide books that he purchased for his ios 8 appeared on my ibooks. How can i stop syncing with him ? Also i want to know if the old books i have in my ibooks and photos in my photo stream have been synced to his new ipad also? I cant see his ipad since he's far away from me right now. I just turned off all options in my icloud setting, will this erase all the syncing between our devices? Please answer soon. Thank you so much.

How can I let firefox save usernames/passwords for multiple subdomains that use the same username but different passwords?

on a particular website that has sub domains I have multiple accounts with the same name but different password. Firefox seems only able to save one of them, because they are on the same site.

"Things"? What things? Apps for keeping track of when to change cat litter? 30 different versions of "twinkle, twinkle little star" played by everything from punk rockers to Gregorian chant? Videos on the best way to make Christmas cake?

Looking for a function that returns the currently opened document type

Dear SAP gurus
I have a user exit for transaction VA02. In VA02, when I click on button (Item details-configuration),
it launches a URL in a browser. I am asked to add to the URL, values like Document Type, Document Number
and Line Item Number.
I can get Document Number and Line Item Number from the presently opened Sales Document by using the standard Function 'CUCB_GET_OWNER_OF_CFG'.
However, I am not able get the value of Document Type. Is there any function that will give me
the value of the Document type of the present document that is open.
Any feedback/Suggestion will be highly appreciated.
Thanks
Ram

If you're in a VA02 user exit, the document type should be in VBAK-AUART, if I remember the field name correctly. I would think that ANYWHERE in VA02, that field will be available to you.
If you want the text of the document type, forward navigate from vbak-auart data element to the domain and look at the values...there'll be a config (T) table (and you may need to add T to the end to get the associated text table) that describes the document type in your system's language, like:
E OR Order
or something like that... Sorry, in my installation, we don't use the logistics modules, so I'm writing from memory.

It it possible to look for a page that does not contain a string?

Is it possible in the search feature in Dreamweaver CS3 to find all pages that do NOT contain a specific string?

I don't think so, at least not directly. I could be wrong, Regular Expressions can be pretty powerful, I'm not sure how well they're implemented in CS3 though: http://www.adobe.com/devnet/dreamweaver/articles/regular_expressions_pt1.edu.html
Maybe you could do a find/replace of that specific string, with itself.
All of the files that have it would be updated without actually changing the code.
The Date Modified for the file would change though.
The files without the string of info you are looking for would have the old modification date.

Lirc: Looking for a way to map the same button to two apps

I have two apps on my PC that I would like to control: One is Mplayer, and one is Amarok. Now, I'd like a way to use (for example) the same buttons for volume, play/pause and skip/rew in both apps, but I have no idea how to do this, short of writing two lirc.confs, writing a script to swap them out and launching the script via irexec.
Can anyone think of a simpler way to do this or do I need to do it the hard way?
Ideally, I'd like it to be hierarchical: if mplayer is running, it gets the command. Otherwise, Amarok gets it (since it's always running anyways).

I have two apps on my PC that I would like to control: One is Mplayer, and one is Amarok. Now, I'd like a way to use (for example) the same buttons for volume, play/pause and skip/rew in both apps, but I have no idea how to do this, short of writing two lirc.confs, writing a script to swap them out and launching the script via irexec.
Can anyone think of a simpler way to do this or do I need to do it the hard way?
Ideally, I'd like it to be hierarchical: if mplayer is running, it gets the command. Otherwise, Amarok gets it (since it's always running anyways).

Need an app to edit and sign word documents (sign with stylus)! Notability let's me sign but doesn't pull up letter head, quickofficepro let's me edit but not sign. Looking for an app that does both

I am looking for an app where I can edit word documents as well as sign them. I am a physical therapist whose looking to cut down on paper work. Someone types my evaluations and then we print them out for me to edit by hand and then they go back and make the corrections on the computer then w print them and sign them to send off. Recently I have begun using apps where I can pull up the document and edit it thru quickofficepro or through cloudon, but I cannot sign them using a stylus pen. I also have notability which I can use to sign the documents, but it doesn't save the document as a doc, it's either a PDF or rtf. Also, in notability, it doesn't pull up the letter head for our company which is a template with our logo on it. So I need an app where I can both edit and sign my documents by hand using a stylus. If someone could provide me with any relevant information I would greatly appreciate it. Thank you for your time.

Hi,
Pages for Mac OS X, the topic discussed in this community won't do it.
I think you'll have a better chance for a useful answer in either the Using iPad or the iPad in the Enterprise community.
Regards,
Barry

Looking for lake.class that allows the direction of waves

Is there a version of the lake.class applet that allows the direction of the waves to change. Also any other applets for lake that allow more settings. Mainly the direction thing right now.
I appreciate any help.

Hi Gunter,
The software class is System.SoftwareItem.
The device class is System.Device.
The relationship is System.DeviceHasSoftwareItemInstalled.
The management pack's name is System.Software.Library (System Software Library).
Cheers,
Marat
Site: www.scutils.com Twitter:
LinkedIn:
Graveyard:

Looking for a cable that does audio out from the dock connection

I would like to use the iphone with the aux in on my car stereo. I have my iphone in a proclip cradle that is mounted to the dash. I would like a cable that plugs in to the dock connection on the bottom of the iphone and goes into the aux in on the front of my car stereo. I really don't want to use the headphone jack on the top since I have to use the adapter, and after you plug that in to the iphone, and then the cable into that, it sticks up like a mile in the air. Does anyone know of any cables that will work for me??

I have an old 512 MB iPod Shuffle that I gave my 8-yr old son and as well as an iPod Nano that I recently purchased for my daughter. I tried to use my car AUX (Honda Jazz) to play from my iPhone and looks like it does not work for my iPhone (yes, I made it to work in Vodafone network in New Zealand). Then I tried with the old iPod shuffle and it works fine as well. Lastly I tried with iPod Nano and looks like it works with iPod Nano as well. Later I tried with a Samsung headphone to see if it did work with my iPhone (instead of iPhone headphone), it worked well. I am not sure what to do now. I might call Apple to see if they have anything that'll work for iPhone.
Cheers,
S

Looking for a terminal that does not truncate lines when resized

I am a huge fan of tiling window managers in general and have used dwm exclusively for over a year now. One thing that drives me crazy though is that when I switch a terminal window from being the primary window to a secondary and then back again, all of the lines are truncated to the smaller width. If I am watching a log file for example, this makes the previous output totally unreadable. Does anyone have a solution for this? Is there a way to make the terminal not truncate the lines if resized to a smaller width?
Thanks!

Try
https://bbs.archlinux.org/viewtopic.php?pid=548267
http://tomayko.com/writings/StupidShellTricks

"ThumSstrips" is not supported by 5.0, so is there another add-on that does the same thing, so if U want to find a previous page easily, is there an add-on like "Thumbstrips"?

With "ThumbStrips" all the pages I looked at while browsing, can be seen in small pictures at the bottom of my screen to help me find want I to go back to by clicking on it to open it up again. February 2010, developers of "ThumbStrips" turned this add-on over to the users. There is no one now to fix it to operate with Firefox 5.0. Is there someone out there that would fix a "New & Improved ThumbStrips"?

Mahsa21,
We are glad that we were able to resolve the international calling plan issue for you. If you need assistance,please reach out to us.
thanks,
Tonya D.

Looking for a BAPI that does the same as /$SYNC

Similar Messages

Maybe you are looking for