Looking for a beta tester

I'm putting the final touches on my next app. I'd love to get another set of eyes to help me go over the app. So I'm looking for a volunteer to help me test the heck out of my app.
In return I will offer my time to help either the same person with their app (testing, not writing) or the app of someone else. Kind of a Pay-It-Forward idea.
So if you are seriously interested and have the time this week or next to help me out please contact me at:
rmaddy followed by the circled A then G mail company suffix.
Ideally the willing person will look for bugs as well as offer suggestions on usability, and the like.
And I'm looking for an person who does not develop iPhone apps professionally, but on their own time. No NDA required but I'd like to keep the app details between me and the other person until it's released.
Thanks.

may i?

Similar Messages

Looking for a better solution that tunnel interface

Hi
acctualy I have a Vsat connection between my remote site and central office
on both site we have router and sat modem
I have now a tunnel interface between my two routers,I am looking for a better idea,,

hi...
so you have tunnel interface between your two router so now what are you looking for...?
secure IPsec connection or what???
please explaine in details
regards
Devang

Looking for a better heatsink help....K8N NEO2

Im looking for a better heatsink....any suggestions? I may oc it but for now I wont....it idles at 40-41 and stays at 60 when im gaming 58 if i turn off cool n quiet.....and thats with some ocz ultra5 Thermal compund....ThX

Yes, agree with SAB, zalman 7000 is a good one, however I´ve got 2 very simular K8N Neo2-systems but with 2 different cpu coolers.
One with zalman 7000alcu and one with Thermalright XP-90 and a zalman 92mm fan ( you can use what ever 80/92mm fan you like high speed, low speed, led colored, etc).
Both are equal regarding cooling to my experience, but I prefered the XP-90 because I did not have to remove the backplate ( I think zalman recommends mounting it´s own backplate to get the right distance/pressure between the cooler and cpu ).
With the XP-90 you just switch the retension mechanism which is easy ( even with the MoBo in the case ).

Looking for a Software/Test Engineer position

Hello, I am looking for a Software/Test Engineer position in London or abroad.
I worked on several projects with Labview and National Instruments hardware (Acquisition and Generator cards).
Please refer to my CV and my LinkedIn profile for additional information.
uk.linkedin.com/pub/jean-félix-majurel/5a/223/a14/
Don't hesitate to contact me for an opportunity.
Best regards,
Jean-Félix Majurel
Attachments:
CV.pdf ‏316 KB

Hello DocJ,
We are located far north of Chicago in Gurnee, IL and are accepting resumes for a LabVIEW position. Please send your resume to [email protected]
Thanks

I am looking for a load testing tool for my flex application

I am looking for a load testing tool for my flex application having a limited budghet of 1000-1500$. I have gone through NEOLoad,WebUiLoad all are very expensive.

Do you have iPad 1 or 2?
You can connect iPad 1 via a VGA adapter to any projector with a VGA input (all projectors have this).
You can connect iPad 2 via VGA or HDMI.
I like Epson or Sony for projectors.

Looking for SAP TAO testing process

hi all.
looking for sap tao testing details
like software etc
links
integration
Regards
Parameshwar

hi
I think you will have to float a invitation to consulting companies to do this assignment for you.
Regards
sameer

Looking for a Performance testing tool

We want to stress test our multiserver Adobe Connect before putting into production. HP tool was not successful. Any Recommendations on tool and method?

Cameron,
Thanks for your input! Sounds like you are probably using these
products.
I saw the PerformAssure demo. Their GUI is very slick!! PerformAssure
does some cool stuff like comparing EJB metrics with system metrics
and were able to show me the EJB method that was causing a problem
with a petstore application.
I heard about this new tool from a company called Performant
(http://www.performant.com). I am signed up for a demo with these
folks. Will let you all know what I find.
I looked at Wily site and didn't persue them as they seem to be
deployable in the production environment. Our application is not live
yet, but we want to be able to make sure it can handle good load ;)
Thanks!
--N
"Cameron Purdy" <[email protected]> wrote in message news:<[email protected]>...
I haven't had a chance yet to look at Sitraka's software, but Precise
Indepth/J2EE and Wily Introscope are both pretty popular with Weblogic, and
I think they both do a good job of what they do.
Peace,
Cameron Purdy
Tangosol, Inc.
http://www.tangosol.com/coherence.jsp
Tangosol Coherence: Clustered Replicated Cache for Weblogic
"Neil" <[email protected]> wrote in message
news:[email protected]..
Hello All!
I need help! I am trying to find out which of the tools is better
suited for me to be able to do performance testing of an application
under load.
I am looking for a tool that can provide me detailed application
performance metrics. Seems like both Insight and Perform Assure can do
this job for me.
If any of you have had experience with using performance tools such as
Prescise Insight or Sitraka's Perform Assure I would appreciate any
input you might have on your usage experience of these tools.
Also if you know of any other tools that might provide similar
information such as the above tools, that would be really helpful.
Thanks a bunch!
Neil.

Looking for a better resource to get a handle on using effects in after effects (CS6 BTW)

Hello thanks for looking in,
I would like to get better control over Zooming. The Zooming I found in AE did not function when
dragged it into my effects controller...Is the only Zoom control really the "Scale" as found in Prem-Pro?
I could not find it in AE. I wanted to zoom over the shoulder of my actor and concentrate on what my Actor is looking at/pointing at. I could not find where that effect is at in AE.
If you know of a couple good tutorials to watch that show how to control the effecst in After-Effects it would be welcomed and appreciated. If you know the specific path to use to pan and
zoom for my desired shot mentioned, that too would be appreciated. One other ? I skimmed through "Creative Cow" but there are many videos and after watching a couple that were titled what
I want, were not what I was looking for. Spent an hour plus surfing before I came here to ask.
Are some of the effects only applicable to one or the other? IE: Movies or stills? If so is there a
manual that states what can be used with what? I tried dragging some of the effects into my effects area and they would not populate. IE: Zoom Forward. Only used for Text?
Thanks for your time with this in advance.

Start here to learn After Effects: http://adobe.ly/bjBT3P
(That link is the direct link to the resources recommended on the thread that shooternz gave.)

Looking for a better way to backup end users

Hello there.
Not sure if this the best forum for this post but here goes.
Last week my company had a break in and a couple of laptops got lifted. Not a big deal as I had backups of the machines on tape. It did take a while to recover the files though. During that time I got to thinking about a better way to backup and I am looking for any ideas of if this would work or not.
First quick overview. About 60 end users majority with laptops.
What I am thinking of doing is this. Take an xServe RAID configured in RAID 5, for redundancy and speed, and creating a shared folder on it for each of my end users. This way if they need to retrieve a file they can log in and will not have to call me. Then, this is where I need help, use some tool to copy all of their files at specified intervals into their folder, at least once a day. I am currently using Retrospect to backup everyone directly to tape and I could use that to do this but the only thing I do not like about Retrospect is it can only do one user at a time. With 60 users I have to start it pretty early in the day. I know copy files would be alot faster so I am not ruling it out. I was also thinking about using ChronoSync to accomplish this and then use Retrospect to backup the RAID to tape for long term storage. I am ruling out using Home directories on the xServe for my users because they are all laptops and are usually out of the office at least one day a week.
If anyone could offer some ideas of whether or not this is going to work or not or if you have other suggestions, any help would be greatly appreciated.
Thanks in advance.
Daniel Krajc

Hi,
you could be using a combination of Mobile Accounts (for the settings of the ibook) and rsync (which is installed by default on 10.3 and 10.4), check man rsync for more info.
regards.
Dimi.

[JS] "InDiCode" : Unicode toolbox for InDesign (beta-test)

"InDiCode.js" allows users to:
- insert characters by Unicode id (or set of id's)
- identify "special characters"
- check available glyphs in the current font
It's supposed to work on ID CS, CS2 and CS3.
I hope you'll enjoy to beta-test it.
Overview and download here:
http://marcautret.free.fr/geek/indd/unicode/part3.php
Thanks for your feedbacks!

Thanks Peter,
As you see, the dropdown list is just a predefined collection of ranges which make easier the inspection of usual Unicode sets. The "javascripter" is highly requested to customize these sets for his own convenience. Alternately, it's possible to stipulate any range directly from the Unicode field, using comma separated values and/or dashes for Unicode segments.
You have a point : the glyphs/ranges available in the current font are certainly documented in the font file itself. The problem is that I don't know how to extract and parse this information! For the moment, the glyph-checking process is "empirical", thanks to the Dave Saunder's outline-trick:
http://jsid.blogspot.com/2006/03/what-and-wheres-that-glyph.html
[Precision: SpecialCharacters names and id's exposed from the script are also hard-coded, despite of your great method using the array SpecialCharacters.reflect.properties. The point is that I wanted InDiCode to be InDesign CS-compatible.]
I rely on users feedbacks and requests to improve and extend the process in the future. InDiCode has been primarly designed as a library and the script hosts a lot of "sleeping" features (exporting methods, UTF8 translation...).

Looking for a better graphic card. Need feedback and suggestion

I'm looking to get a different graphic card but I'm not sure really what to buy,
These are my computer specs
Computer: Gateway Gt5228 Media center edition
OS: Windows Xp
Current graphic card: NVIDIA GeForce 6100 PCI Express Slot avaliable
I was wondering what would be a good graphic card that is a good significant upgrade. I'm looking for one that has a significant increase over what I have right now, it doesn't necessarily have to be the best out there.
I want to be able to play a game call Diablo 3
These are the High and low Performance, that the game will run with.
Supported - High PerformanceNVIDIA AMD/ATI INTEL
GeForce GTX 590
Radeon HD 6990
N/A
GeForce GTX 580
Radeon HD 6970
GeForce GTX 570
Radeon HD 6950
GeForce GTX 560 ti
Radeon HD 6870
GeForce GTX 550 ti
Radeon HD 6850
GeForce GTX 480
Radeon HD 6790
GeForce GTX 470
Radeon HD 6770
GeForce GTX 465
Radeon HD 6750
GeForce GTX 460
Radeon HD 5970
GeForce GTS 360M
Radeon HD 5870
GeForce GTX 295
Radeon HD 5850
GeForce GTX 285
Radeon HD 5830
Geforce GTX 280
Radeon HD 5770
Geforce GTX 280M
Radeon HD 5750
GeForce GTX 275
Radeon HD 4870
GeForce GTX 260
Radeon HD 4870
Quadro FX 5800
Radeon HD 4850
Radeon HD 4800
FirePro 3D V8750
FirePro 3D V8700
FireStream 9370
Firestream 9350
FireStream 9270
FireStream 9250
Supported - Low PerformanceNVIDIA AMD/ATI INTEL
GeForce 9500 GT
Radeon HD 3650 AGP
HD Graphics 4000
GeForce 9400 GT
Radeon HD 3650
HD Graphics 3000
GeForce 9300 GS
Radeon HD 3600
HD Graphics 2000/1000
GeForce 8800 GS
Radeon HD 3470
GeForce 8600 GT
Radeon HD 3450
GeForce 8600 GTS
Radeon HD 3430
GeForce 8500 GT
Radeon HD 3200
GeForce 8400 GS
Radeon HD 3100
GeForce 8400
Radeon HD 2600 XT AGP
GeForce 8300 GS
Radeon HD 2600 XT
GeForce 8300
Radeon HD 2400 Series
GeForce 8200
Radeon HD 2350
GeForce 8100
Radeon HD 2100
GeForce 7950
Mobility Radeon HD 4530
GeForce 7900
Mobility Radeon HD 4330
GeForce 7900 GS
Mobility Radeon HD 2600 XT
GeForce 9500M GS
Mobility Radeon HD 2600
GeForce 9500M G
Mobility Radeon HD 2600
GeForce 9400M
Mobility Radeon HD 2400 XT
GeForce 8600M GT
Mobility Radeon HD 2400
GeForce Go 7900
Mobility Radeon HD 2300
GeForce Go 7800
Mobility Radeon X2300
Quadro FX 5500
Radeon X1950 Series
Quadro FX 4500
Radeon E2400
Quadro FX 4000
FirePro 3D V7750
Quadro FX 3500
FirePro 3D V5700
Quadro FX 3450
Any help would be greatly appreciated
Which ones can i use with my computer but without the need to buy nothing else.
thank you
-Geo

Honestly I wouldn't spend too much trying to upgrade your computer. It has an aging dual core Athlon processor, and only 2GB of RAM. Even with the highest top of the line card, with that CPU/RAM setup, your computer is probably going to struggle to run it.
Hate to be the bearer of bad news.
If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

Looking for info on "test wlan dot1x radius" command

Is there a way to perform RADIUS connectivity and optionally basic auth testing, without a client?
I see the "test wlan dot1x radius" command in the CLI which looks promising, but I can't find any info on it.
The "test ..." commands aren't in the Command Reference (?!)
Can anyone provide any info on how the above command works (if at all)
Thanks in advance

For testing radius, I use NTRadPing. Might be a better option for you.
http://www.novell.com/coolsolutions/tools/14377.html
Sent from Cisco Technical Support iPhone App

Looking for a Better Search Solution

One of my company's products has a large number of
configuration options that we purposefully don't include in the
regular online help. We have been providing a separate PDF of the
settings, but we are now switching to an online help format (a
separate help file) for this information. We want it to be easy for
users to download/install, so we were planning to use the CHM
format, so there would just be a single file for them to download
and open. We are using RoboHelp HTML v7 to generate the help. We
use Dreamweaver as our HTML editor. We will be updating this new
help system about once/month.
[Note: Because of the nature of the information in this help
system, indexing--while often better for help systems--is not
practical in this case; we must use the Search feature.]
As we were testing the new format, we noticed that the
results on the Search tab were not what we were hoping for. If we
searched on "auto," it would find "[Auto Release]" or "auto-run,"
it would not find "AutoComments." This is not ideal for what we
want. We even cleared the lists of Stop Words and Ignore Phrases,
to no avail.
Webhelp does search better, but we found that it would find
"[Autocomment]" but not "[AutoCap]." That is likely because of the
mid-word capitalization, but it's part of our program, and we can't
change it. This led us to Peter Grainge's website and the
ZoomSearch program for use with Webhelp. This search does work a
lot better (thanks!). However, we don't want our users to have to
deal with multiple files. We investigated Adobe AIR, which does do
a nice job packaging the webhelp files, but it seems to only
acknowledge RoboHelp's Search feature; it disregards the manually
made ZoomSearch button and behavior, so we can't package and
deliver the Webhelp that way. Our next idea was to use
InstallShield to handle installing/updating the files and creating
a shortcut on the desktop.
Before that, though, does anyone have any suggestions for
working around the CHM search limitations? Or do you have any other
ideas to make Webhelp easier to distribute that we haven't stumbled
upon yet?
Thanks!
Audrey Blackwell
Corporate Documentation Manager
Orchard Software Corporation

Hi, Audrey,
quote:
Before that, though, does anyone have any suggestions for
working around the CHM search limitations?
If you can educate your users to add wildcards to their
search terms, they can find all the words that you provided as
examples in your message. For example, searching for
auto* will find
AutoComments,
[Auto Release],
[AutoCap],
auto-run, and
[Autocomment].
See this article for more information:
http://helpware.net/htmlhelp/hhfindingtext.htm
Pete

Looking for a better setup!

Hi all --
For the last year, I have run a successful, professional-sounding podcast using the combination of a Dell Inspiron laptop, some free software, and a host of mixers, microphones and phone couplers. Recently, however, this laptop started having issues, and I decided to pull the trigger on a MacBook Pro. Now, I find myself in the position of slowly migrating my recording operations over to the Mac, and I was hoping someone could help me mimic or improve my current process. I feel like -- OK, I know -- I'm going through some extra steps right now; switching machines gives me the chance to modify my process.
(Recording equipment being used: Shure SM7B mic, plugged into an Alesis 8USB Multimix, plugged into my laptop using USB.)
Current process after equipment is plugged in:
1) Record / edit raw audio using Goldwave
2) Export edited WAV file and run through Levelator to balance out sound levels
3) Take Levelator output into Audacity, where I mix it with other audio (intro, outtro, other bumpers); export as WAV (I'd export as MP3, but for some reason, the MP3 doesn't sound right)
4) Take exported WAV back into Goldwave and save as MP3 (32 kbps / 22.1 kHz)
5) Take MP3 into iTunes to add titles and artwork
6) Upload to my server and update my RSS feed
I'm not looking to swap out any equipment, just wondering how I could duplicate or improve upon this current process using my new Mac. Any and all suggestions are welcome.
Thanks in advance!

I have the same Alesis, and I was pretty disgusted with the hiss level on the mic input, using a moving-coil (I use an external mic preamp): I'm not familiar with the Shure model you have, but if it's a capacitor using the phantom power input this probably isn't going to be an issue. There's also the mysterious Alesis 'whine' when using USB - I don't connect it this way for this reason, I use an Edirol interface.
If you're interested you can assess the resultant quality here. My mic is a Beyer M3, bought around 28 years ago.
If you're happy with the results from your setup I shouldn't tamper with it. However I would suggest that 32kb/s is a pretty low bitrate, and bound to produce artefacts. Mine is 96kb/s mono, equivalent to 192kb/s stereo, though I would think that 128kb/s would be OK. You might try doing extracts at different bitrates - it's always a compromise between quality and file size. Your sampling rate is limiting your frequency response to around 9 or 10kHz, which is fine for speech or music on small speakers: 44.1kHz would give you a full response to 20kHz but of course the file sizes are bigger.
I'm not familiar with GoldWave; I'm not a fan of Audacity: free is nice, but I found it clunky to use and at that time none too stable - it may be better now. I use Amadeus Pro - you should be able to do everything right down to the MP3 conversion in that, though you would have to use iTunes or MP3 IDX for that (I prefer the latter but it's $18 where iTunes is free).
For making the podcast and the feed I use Podcast Maker - it takes you MP3s and can turn them into M4as with chapters and images, and writes a nice clean feed (unlike certain online services).

Looking for a better 1080i60 to 720p60 workflow??

Hey guys,
Need some good advice here.
Right now the material comes in to the network on hdcam at 1080i60
I digitize this footage at 1080i60 apple prores HQ- where the frame rate is 29.97
I then edit my promo using the 1080i (1080i60 sequence) setting.
here's my problem-->
the network wants these promo's at 720p59.94 for HD air.
What I've been doing is using quicktime comversion to make 720p60 proresHQ QT files
that I then bring to the network and layoff to dvcproHD.
compression type--apple prores HQ
frame rate--59.94 (no check next to interlaced)
size--1280x720HD (no check next to deinterlace source video)
This has worked up until I moved to FCP7.
When I export 1080i60 some of my _speed ramps_ stutter.
And this looks even worse when converted to 720p60
My question is....Am I doing this the right way?
Should I
1. keep doing what I've been doing
2. convert all the footage to 720p60 first
3. there's a better way and you guys know it!!
sorry its so long but i wanted to make sure I had all the details right.
Thanks
J-P

Hi,
you could be using a combination of Mobile Accounts (for the settings of the ibook) and rsync (which is installed by default on 10.3 and 10.4), check man rsync for more info.
regards.
Dimi.

Looking for a beta tester

Similar Messages

Maybe you are looking for