Looking for a better heatsink help....K8N NEO2

Im looking for a better heatsink....any suggestions? I may oc it but for now I wont....it idles at 40-41 and stays at 60 when im gaming 58 if i turn off cool n quiet.....and thats with some ocz ultra5 Thermal compund....ThX

Yes, agree with SAB, zalman 7000 is a good one, however I´ve got 2 very simular K8N Neo2-systems but with 2 different cpu coolers.
One with zalman 7000alcu and one with Thermalright XP-90 and a zalman 92mm fan ( you can use what ever 80/92mm fan you like high speed, low speed, led colored, etc).
Both are equal regarding cooling to my experience, but I prefered the XP-90 because I did not have to remove the backplate ( I think zalman recommends mounting it´s own backplate to get the right distance/pressure between the cooler and cpu ).
With the XP-90 you just switch the retension mechanism which is easy ( even with the MoBo in the case ).

Similar Messages

Looking for a beta tester

I'm putting the final touches on my next app. I'd love to get another set of eyes to help me go over the app. So I'm looking for a volunteer to help me test the heck out of my app.
In return I will offer my time to help either the same person with their app (testing, not writing) or the app of someone else. Kind of a Pay-It-Forward idea.
So if you are seriously interested and have the time this week or next to help me out please contact me at:
rmaddy followed by the circled A then G mail company suffix.
Ideally the willing person will look for bugs as well as offer suggestions on usability, and the like.
And I'm looking for an person who does not develop iPhone apps professionally, but on their own time. No NDA required but I'd like to keep the app details between me and the other person until it's released.
Thanks.

may i?

Looking for a better solution that tunnel interface

Hi
acctualy I have a Vsat connection between my remote site and central office
on both site we have router and sat modem
I have now a tunnel interface between my two routers,I am looking for a better idea,,

hi...
so you have tunnel interface between your two router so now what are you looking for...?
secure IPsec connection or what???
please explaine in details
regards
Devang

HT4796 My mac recognizes my pc but is stuck on "looking for other sources". Help!!

My mac finds my pc but then keeps "looking for other sources". Help!

Hi guys.
Similar problem here.
Setup Assistant or Migration Assistan can not see my external drive used for time machine backups.
The facts.
Downloaded Mavericks upgrade from App Store and made a bootable usb.
Booted from the usb and erased macintosh hd to make a clean install of the OS.
Made the fresh installation and when setup assistant appears my external drive on which i previously did all backups with time machine will not appear at all. Instead I get "looking for sources" with no success on seeing the external HD.
Same happens with Migration Assistant once logged in to the fresh OS.
The external HD is not recognised and won't come up.
I 've also tried the Restore Time Machine Backup option by booting from the bootable USB.
When I choose my external HD which now appears I get the message that no OS X system backups are available.
Meanwhile I can see and open the drive once logged into the OS and the backups on the drive seem ok. However I can't spot the applications folder. Only users folders.
Are my backups corrupted? How can I restore the files from the external HD

I am looking for a software to help me write in Ethiopic (Amharic) fonts just as I can using Tavultesoft keyman for Windows. Help?

I am looking for a software to help me write in Ethiopic (Amharic) fonts the same way I use Tavultesoft Keyman in Windows. Can someone help?

RMMT wrote:
Try putting Summer Institute for Linguistics into Google and see if they have an Amharic font for you.
Or just click on the url I provided earlier, which has a link to the exact SIL page.
OS X already has an Amharic font, Kefa. What you really need from SIL is the keyboard.

Looking for independent contractors to help produce Captivate Modules

Realty Pro Academy is looking for independent contractors to help produce Captivate Modules from Power Point.
The candidate must be detail oriented, be able to produce to specification and have proven ability to meet deadlines.
This position is a 1099 position, and is able to be done remotely. The pay is project based, and is contingent upon project submission acceptance.
If you are interested, please send your resume to [email protected]
Bruce Brown
President

hello Maxwell ,
hhave a look at tcode BAPI , under MM application area.... u will get all BAPIs related to MM modules.
Identify if a quotation number exists in the system which a specific sales organization.
Determine the sale price of a material for a specific customer-->u need to ask your functional consultant , may be he is creating info record for that one?
A simplier way to identify the plant specific status of a material without using the MATERIALGETALL-->use table MARC
Identify if a specific customer used a supplied purchase order before.
Identify if a customer has been placed on credit hold-->i think u can make use of tcode vkm4 or custome master data will have all these info.
regards
Prabhu

What RAM for o/cing 3500+ on K8N Neo2 Plat?

Hi all,
Ive been reading all the problems with o/cing these little beasts, and i hope to god i dont run into any of them!
Im not using SATA or RAID so i guess thats a few problems out the way. My current RAM is really turd though, and its time to buy some new stuff. I want 1gb of something that is hopefully going to hit 250x10 with decent timings. Am i hoping for too much? Ive seen a few people with this setup though.
Ive read the recent Anandtech 3200 memory roundup, and had made up my mind on getting the crucial ballistix stuff. Its the only RAM in the test that hit DDR500 and beyond on the A64 platform. (Supposedly on the K8N neo2 aswell) But after more digging it seems that this is infact a load of crap.
What do i buy???????
I dont want to shell out a load of cash on something that isnt going to perform. Im gutted that the crucial 3200 RAM isnt as good as i was lead to believe. It would have been great running DDR500 at those timings.
Anyway, ill also need to get a better HSF. The thermalright slk948 looks good but my local place just got the XP-90's in. Cant seem to find a decent review of them anywhere either. Any recommendations???
Any help would be great,
Cheers

I thought HT Frequency would affect memory throughput but apparently not. I'll try dropping it to 3x. Thanks.
Memtest is good at finding finding errors in a standalone environment by writing a particular pattern to every location in memory then reading it back to make sure it hasn't changed. So it very good for finding marginal chips and validating that everything is properly hooked together. It also has the advantage of running standalone so you eliminate any XP/driver issues from the equation.
Prime95 is an excellent CPU/memory exerciser because it checks the accuracy of an elaborate computational algorithm to make sure of the results. And since it is running under XP it also tests the entire configuration to some extent because drivers and hardware that are marginal will likely fail much faster under the constant load.
What I call Prime95 Lotto is particularly cool. It is the search for the first 10,000,000 digit prime number. If you find it you get a large share of a $100K prize which is currently about $50K. It also runs in the background and utilizes the CPU 100% without affecting your other apps so you can still use your system while it is running.
The Red Rocket Folding Team effort also makes a great background stress tester.
https://forum-en.msi.com/index.php?boardid=30
I've also found a great graphics stresser:
http://www.daionet.gr.jp/~masa/rthdribl/
Get both going and you really work your system!

I'm looking for an app to help with math tutoring.

I doubt that I will find exactly what I am looking for, but if anyone can provide suggestions, I would appreciate it. Groupboard is close, but has a few fatal flaws.
Criteria List(required):
Whiteboard where I can see what my student is writing in real time.
Either latex support or the ability to quickly post one image at a time, at least 10 (20 is better) images per session.
Only I have the ability to erase things or clear the board, not the student.
Criteria List(would be helpful):
Shape drawing tools
Coordinate grid
Formula editor (my students have no desire to learn latex)
It would be best if I can post PDF's but jpegs will work just as well. What I would really like would be www.scribblar.com on an iPad. Unfortunately, it will not run on iPads.
Any suggestions are greatly appreciated.
Thanks.

You might look at the iPads in Education site...
http://ipadeducators.ning.com/

Looking for a better way to backup end users

Hello there.
Not sure if this the best forum for this post but here goes.
Last week my company had a break in and a couple of laptops got lifted. Not a big deal as I had backups of the machines on tape. It did take a while to recover the files though. During that time I got to thinking about a better way to backup and I am looking for any ideas of if this would work or not.
First quick overview. About 60 end users majority with laptops.
What I am thinking of doing is this. Take an xServe RAID configured in RAID 5, for redundancy and speed, and creating a shared folder on it for each of my end users. This way if they need to retrieve a file they can log in and will not have to call me. Then, this is where I need help, use some tool to copy all of their files at specified intervals into their folder, at least once a day. I am currently using Retrospect to backup everyone directly to tape and I could use that to do this but the only thing I do not like about Retrospect is it can only do one user at a time. With 60 users I have to start it pretty early in the day. I know copy files would be alot faster so I am not ruling it out. I was also thinking about using ChronoSync to accomplish this and then use Retrospect to backup the RAID to tape for long term storage. I am ruling out using Home directories on the xServe for my users because they are all laptops and are usually out of the office at least one day a week.
If anyone could offer some ideas of whether or not this is going to work or not or if you have other suggestions, any help would be greatly appreciated.
Thanks in advance.
Daniel Krajc

Hi,
you could be using a combination of Mobile Accounts (for the settings of the ibook) and rsync (which is installed by default on 10.3 and 10.4), check man rsync for more info.
regards.
Dimi.

Finder crashes when "looking for networks" - workaround that helps

I've read through most of the messages about finder crashes, but what's going on in my case I haven't seen. As I have a work around, I thought I should post.
If for whatever reason the wireless connection pauses or gets interrupted (for example, by closing the lid), the finder hangs in the process of "looking for networks." Most of the time I can still pull up the dock -- the spinning beach ball only clicks in if I mouse over the top menu bar. Sometimes (but not always) I can quit open applications through the dock before I have to do a hard reset.
My workaround is this: I turn wi-fi off before I close the lid. When I open the lid, I wait a short time -- 30 seconds, about -- and turn the wireless back on, and this way I can avoid the finder crashing. If the wi-fi pauses for some other external reason, when "looking for networks" starts up, the finder will hang again.
It's way past time that Apple coughs up a permanent fix, but this might help somebody who's having the same problem. And maybe somebody has a better workaround, in which case, I'd love to hear about it.

Fire_Bird wrote:
1. Going into a folder on my external hard drive that contains the installer for divx for mac.
Divx has been a source of problems with both Tiger & Leopard. See for example Mac OS X 10.5: Finder may not fully "load". If you have installed it, it is probably at least part of your problem.
then i erased the whole thing, and used the Mac OS X 10.5 install DVD that came with my mom's iMac (still happens)
This is not recommended. The install disks that come with specific Mac models do not necessarily install the same things or do all the error checks that the retail Leopard installer disk does. (It is also a violation of the software license to install it on another Mac.) If you want a trouble-free, supported installation of Leopard, use only the retail installer or a disk specifically intended for your exact Mac model.

Looking for a better validation, for GT

Hello folks,
I have to make a validation on PT60 Transaction, I have to validate te schedule for the employees, I create a function on pe04 for TM and I have a form in the include RPTMOZ00 where I get the table P2011 where I have the schedule, so what I have to do is check the pairs of the hour like this, I identificate the entry like a P10 out to lunch like P15 entry for lunch P25 and out of the work like P20, so I have to check that the order is correct, it can have another entry(P10) and another exit (P20) it's optional ,I can sort by the hour and I got an order but it can came duplicate or triplicate, etc. I can't use delete adjacent duplicates because it depends if is an entry i delete all the P10 except the first one, and if it is and out of work I delete all the P20 except the last one, and I have to do some validation like this.
Ex.
If came P10-P25-P20 ERROR
If came P10-P15-P20 ERROR
If came P15-P25 ERROR
If came P10-P25 ERROR
If came P10 ERROR
ETC.
The correct order is
P10-P15-P25-P20
OR
P10-P20
OR
P10-P15-P25-P20-P10-P20
I think it could have a simple validation that cover that ranges and another ones, but I accept suggestions..
Because my confusion is each code (P10,P20,etc) came in line of the table not in just one.
Let me know if you have some opinion.
Thanks
Bye.

Yes, agree with SAB, zalman 7000 is a good one, however I´ve got 2 very simular K8N Neo2-systems but with 2 different cpu coolers.
One with zalman 7000alcu and one with Thermalright XP-90 and a zalman 92mm fan ( you can use what ever 80/92mm fan you like high speed, low speed, led colored, etc).
Both are equal regarding cooling to my experience, but I prefered the XP-90 because I did not have to remove the backplate ( I think zalman recommends mounting it´s own backplate to get the right distance/pressure between the cooler and cpu ).
With the XP-90 you just switch the retension mechanism which is easy ( even with the MoBo in the case ).

Looking for a better data-transfer mechanism

We are currently developing a rich client desktop application.
The client can talk to back-end server via the web service.
The web service is responsible for querying data from the back-end database (oracle).
And for function-like requests from clients, the web service simply submit a job to the oracle db.
The business logic resides in oracle stored procedure.
And the data is in the same database.
When the client request for the data that could make the database to retrieve 1,000 records out of, say 1,000,000 records.
what we do now is making multiple web service calls, each time for 100 records (in order to make the response data package small enough),
until no more could be retrieved.
In detail, we make all the queries appended with an order by clause,
and we send over the starting index along with the number of records retrieving,
and use JDBC result set (in the web service method) to re-position and get the needed data,
then use OracleCachedRowSet to hold the data and then send back to the client.
The problem here seemed to be significant.
Multiple web service calls are being wasted.
Each web service call will make the db run the query (in-efficiently) again, and wasted whole bunch of data.
In this querying scenario,
we do not want to separate the data in to different pages (like the table in traditional web-app),
and we want to know the meta data for the query result (our client application have to make use of the metas).
Due to our in-experienced background, we can not figure out an efficient mechanism for this querying scenario.
We thought socket-programming might work for us since once it's opened, the connection will be always be established,
and then we would not have to waste multiple db queries.
But socket can not by-pass the firewalls, and we would lost much the benefits introduced by the web service.
Is there an efficient way of doing this in the web service world?
Please enlighten us.
Any suggestion / criticism welcomed.
Thanks in advance.

Yes, agree with SAB, zalman 7000 is a good one, however I´ve got 2 very simular K8N Neo2-systems but with 2 different cpu coolers.
One with zalman 7000alcu and one with Thermalright XP-90 and a zalman 92mm fan ( you can use what ever 80/92mm fan you like high speed, low speed, led colored, etc).
Both are equal regarding cooling to my experience, but I prefered the XP-90 because I did not have to remove the backplate ( I think zalman recommends mounting it´s own backplate to get the right distance/pressure between the cooler and cpu ).
With the XP-90 you just switch the retension mechanism which is easy ( even with the MoBo in the case ).

Looking for a better way to utilize streams to track deletes in the db.

I'm trying to figure out a way to track deletes in the database using streams. I found that a dml_hander for deletes could satisfy my needs but it appears I would need to create a dml_handler for each table in the schema. Since I have ~250 tables I'm thinking there has to be a better way to do this. I simply need a way to capture all deletes and insert them into a table before they are deleted from the db. Is there a better way then creating a handler for each table?
Thanks,
Doug

So far you haven't posted a version number or any information about the use of any auditing tool, whether FGA or other auditing so it is impossible to either comment or advise you further.
If you want help you are going to need to do something you did not do in your original post and that is provide a description of your environment, your business rules, how you have attempted to use FGA or standard auditing, etc. Streams is for replication not auditing so perhaps you mean AQ but so far you haven't said that yet either.
The more information you can provide, and perhaps some code or clear descriptions of what you've attempted, the better the help possible.

Looking for a better graphic card. Need feedback and suggestion

I'm looking to get a different graphic card but I'm not sure really what to buy,
These are my computer specs
Computer: Gateway Gt5228 Media center edition
OS: Windows Xp
Current graphic card: NVIDIA GeForce 6100 PCI Express Slot avaliable
I was wondering what would be a good graphic card that is a good significant upgrade. I'm looking for one that has a significant increase over what I have right now, it doesn't necessarily have to be the best out there.
I want to be able to play a game call Diablo 3
These are the High and low Performance, that the game will run with.
Supported - High PerformanceNVIDIA AMD/ATI INTEL
GeForce GTX 590
Radeon HD 6990
N/A
GeForce GTX 580
Radeon HD 6970
GeForce GTX 570
Radeon HD 6950
GeForce GTX 560 ti
Radeon HD 6870
GeForce GTX 550 ti
Radeon HD 6850
GeForce GTX 480
Radeon HD 6790
GeForce GTX 470
Radeon HD 6770
GeForce GTX 465
Radeon HD 6750
GeForce GTX 460
Radeon HD 5970
GeForce GTS 360M
Radeon HD 5870
GeForce GTX 295
Radeon HD 5850
GeForce GTX 285
Radeon HD 5830
Geforce GTX 280
Radeon HD 5770
Geforce GTX 280M
Radeon HD 5750
GeForce GTX 275
Radeon HD 4870
GeForce GTX 260
Radeon HD 4870
Quadro FX 5800
Radeon HD 4850
Radeon HD 4800
FirePro 3D V8750
FirePro 3D V8700
FireStream 9370
Firestream 9350
FireStream 9270
FireStream 9250
Supported - Low PerformanceNVIDIA AMD/ATI INTEL
GeForce 9500 GT
Radeon HD 3650 AGP
HD Graphics 4000
GeForce 9400 GT
Radeon HD 3650
HD Graphics 3000
GeForce 9300 GS
Radeon HD 3600
HD Graphics 2000/1000
GeForce 8800 GS
Radeon HD 3470
GeForce 8600 GT
Radeon HD 3450
GeForce 8600 GTS
Radeon HD 3430
GeForce 8500 GT
Radeon HD 3200
GeForce 8400 GS
Radeon HD 3100
GeForce 8400
Radeon HD 2600 XT AGP
GeForce 8300 GS
Radeon HD 2600 XT
GeForce 8300
Radeon HD 2400 Series
GeForce 8200
Radeon HD 2350
GeForce 8100
Radeon HD 2100
GeForce 7950
Mobility Radeon HD 4530
GeForce 7900
Mobility Radeon HD 4330
GeForce 7900 GS
Mobility Radeon HD 2600 XT
GeForce 9500M GS
Mobility Radeon HD 2600
GeForce 9500M G
Mobility Radeon HD 2600
GeForce 9400M
Mobility Radeon HD 2400 XT
GeForce 8600M GT
Mobility Radeon HD 2400
GeForce Go 7900
Mobility Radeon HD 2300
GeForce Go 7800
Mobility Radeon X2300
Quadro FX 5500
Radeon X1950 Series
Quadro FX 4500
Radeon E2400
Quadro FX 4000
FirePro 3D V7750
Quadro FX 3500
FirePro 3D V5700
Quadro FX 3450
Any help would be greatly appreciated
Which ones can i use with my computer but without the need to buy nothing else.
thank you
-Geo

Honestly I wouldn't spend too much trying to upgrade your computer. It has an aging dual core Athlon processor, and only 2GB of RAM. Even with the highest top of the line card, with that CPU/RAM setup, your computer is probably going to struggle to run it.
Hate to be the bearer of bad news.
If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

Looking for a better resource to get a handle on using effects in after effects (CS6 BTW)

Hello thanks for looking in,
I would like to get better control over Zooming. The Zooming I found in AE did not function when
dragged it into my effects controller...Is the only Zoom control really the "Scale" as found in Prem-Pro?
I could not find it in AE. I wanted to zoom over the shoulder of my actor and concentrate on what my Actor is looking at/pointing at. I could not find where that effect is at in AE.
If you know of a couple good tutorials to watch that show how to control the effecst in After-Effects it would be welcomed and appreciated. If you know the specific path to use to pan and
zoom for my desired shot mentioned, that too would be appreciated. One other ? I skimmed through "Creative Cow" but there are many videos and after watching a couple that were titled what
I want, were not what I was looking for. Spent an hour plus surfing before I came here to ask.
Are some of the effects only applicable to one or the other? IE: Movies or stills? If so is there a
manual that states what can be used with what? I tried dragging some of the effects into my effects area and they would not populate. IE: Zoom Forward. Only used for Text?
Thanks for your time with this in advance.

Start here to learn After Effects: http://adobe.ly/bjBT3P
(That link is the direct link to the resources recommended on the thread that shooternz gave.)

Looking for a better heatsink help....K8N NEO2

Similar Messages

Maybe you are looking for