Looking For A Bios Fix

I upgraded my system from a K7T266 to the K7N2 Delta-ILSR.
I was running into the D-LED "Initializing Floppy Controller" where it would go no further.
I tried 3 power supplies (including antec true 550) , and swapped RAM from one of 7 other K7N2-L that we are setting up as BSD boxen.  Still no love.
After reading the posts, I noticed that others who had WD Caviar drives had the same issue. I tried all the jumper settings. No dice.
I can boot up fine sans the drive and I can put in an old maxtor that had Red Hat 7.2 and it boots right up.
Anyone know the deal with WD Caviar drives and if there is a bios fix for it?

If the WD is a single drive, master, remove all jumpers and place at end of cable. Do a fresh install of your OS.  

Similar Messages

  • Looking for a bios update for the Acer aspire M1641 Motherboard

    Looking for a bios update for the Acer aspire M1641 Motherboard All I could find was one for the acer aspire M1640 Which has a different board number but is as close as i can get to it. Is this the right one? If not would anyone be able to point me in the right direction? Thanks.

    @IronFly: The old website is always useful!

  • Looking for VGA BIOS [8800GT-T2D512E-OC]

    I am looking for latest VGA BIOS for MSI 8800GT-T2D512E-OC since this card is not detected by my Motherboard and MSI Live Update BSODs on launch using my friends system. 

    Quote from: Stu on 30-December-07, 20:53:31
    decalpha,
    Did you phone, email, or use the online support request form? (http://support.msi.com.tw)
    Don't forget, it is holiday period, so reply might take a while longer.
    For support requests submitted at the link above, you have to go back to that page to see any response
      Support request was logged online @ (http://support.msi.com.tw) on 4th of December stating this problem.
      In the mean time I had to flash my Motherboard BIOS as requested by support among other things.
      And last week I was asked to flash the VGA BIOS which requires a different system. But, MSI LIVE update would BSOD on launch.
      Anyway, as you said the delay in reply may be due to holiday season. Guess, will have to wait for some more time.
      Hopefully I wouldn't have to return the card.

  • I have been looking for the bookmark fix that allows you to bookmark the url in multiple bookmark folders

    I've been busy the past hour looking for the update for bookmarks so we can add a bookmark in multiple folders without having the first bookmark automatically being deleted when adding the same bookmark to a different bookmark folder.

    There's no "update" for that, it's a matter of learning a different method of saving a bookmark that bypasses the feature which identifies duplicate bookmarks.
    There 5 ways to save a new Bookmark in Firefox: <br />
    1. {Ctrl + D} <br />
    2. Right-click and select Bookmark this Page. <br />
    3. Bookmarks > Bookmark this Page <br />
    4. Double-click the Star that is on the right side of the Location bar. <br />
    ''4a. (A single-click on the Star will save the new Bookmark to the Unsorted Bookmarks folder.)'' <br />
    '''''This last method will allow duplcates to be saved.''''' <br />
    5. Left-click and drag the website image ''(Favicon)'' in the URL bar (or on the active tab) into the Sidebar view of Bookmarks {Ctrl + B} <br />
    '''or''' to the Bookmarks menu bar item ''(the drop-down will open)'' and then onto the drop-down listing of your bookmarks and folder of bookmarks ''(folders will open)''<br />
    '''or''' onto the Bookmarks Toolbar <br />- the new bookmark will be saved when you release the left mouse button
    Firefox bookmarks have worked like this since Firefox 3.0 was released, back in June 2008. The [https://support.mozilla.org/en-US/kb/categorizing-bookmarks-make-them-easy-to-find?esab=a&s=bookmark&r=7&as=s Bookmarks Tags feature] was introduced in Firefox 3.0 to allow the user to categorize their bookmarks more easily than saving the same bookmark into separate folders.

  • Making Edge content work in Internet Explorer - Still looking for the easy fix!

    I know this subject has been kicked around a lot. I've done a lot of on-line research on the matter and came across claims of easy fixes using .js files.
    But none of them are working for me!
    Is there truly a good (and simple) way to make my HTML5 (Edge) content work in Internet Explorer?
    Here is a link to my current project
    Beach Bunny Cottage
    The foreground is the Edge content. The slide show background is not. It is .js file running a background slide show.
    Thanks!!
    John O.

    I have some pages about screenshots and optimization starting here...
    http://roddymckay.com/PhotoSatellite/OptimizeImageFile.html
    Web safe colors are really important if your website is going to be viewed on a PC in Internet Explorer.
    See..
    http://www.iwebformusicians.com/WebMusic/FontsandColors.html
    http://www.iwebformusicians.com/WebMusic/iWebandInternetExplorer.html
    As far as making a site compatible with IE is concerned, the best way is to test your site in this pathetic browser and see how horrendous it looks!

  • Looking for this BIOS

    Hi all I have a K8N Neo4-F Rev 3 that i just installed a A64 4000+ San diego E6 core cpu on and I lost the option to set the Mem command rate in the BIOS, if I read correctly BIOS Ver. W7125NCG.1C0 will fix this.
    I've searched the forum trying to find a working link to this BIOS with no luck, does anyone know where i can find it?
    Thank you 
    JAcKal

    Quote from: JAcKal_6686 on 08-August-07, 02:19:37
    Hey Bosskiller talked to MSI support and they sent me a BIOS for my board that fixed the problem
    Thanks for your help 
    JAcKal
    nice

  • Looking for custom bios msi1656

    I have a msi 1656 (ill post the cpuz and gpuz results for specs) that has always ran hot and would like to randomly freeze.I actually gave up on this laptop for some time because of this as I was unable to find any info for updates and what I could find was missing files etc.
    This computer is a barebones build but the same specs are the same a gx640 1656 so I assume updates for it would work , I am actually on it right now and its oddly working ok right now but I did update the ati video drivers.To get to the point is my vbios up to date? and my bios etc also the bios is locked , I'd like to be able to adjust things and I am unsure whats outdated and what I can do about it I have came across posts of customs made by svet via google hopefully he can take a look at this post.
    thanks!

    Thanks for your reply , I actually have had it on since last post and even took it to work and used it all day its been perfectly fine which kind of annoys me since this laptop sat for so long. The video card is now running about 12c cooler at idle I even stress tested it which formally killed it , it appears that the video card drivers were the problem all this time even though I had them updated normally , it appears I just gave up in anger too soon.
    If it keep this up is a custom bios a possibility as id like to adjust some settings for the processor and ram etc as I have nothing for settings what so ever.
    thanks and I obviously won't mind donating
    Also to the cleaning the laptop is never been used hardly it likely has about 40 days total usage but I did blow it out canned air I honestly think it was just the video card.

  • Looking for guidance to fix my VERY SLOW imac/osx mavericks

    I installed Mavericks many months ago and was disappointed in how it just crippled my system. To date I've just muddled through.   I've tried cleaning out some programs, but I'm not sure what I should keep and what I should ditch. I'm not also sure how much space I have or need for the programs I run.  I just started using Adobe Creative Suite and those programs are very very difficult to work with - in any kind of timely manner. (which I need to do for my work) so I'm default to working on a PC (where I also have it installed)
    I ran the etracheck that's been recommended in other discussions:  Below is the result.  Any  help would be much appreciated. Thanks.
    EtreCheck version: 1.9.15 (52)
    Report generated September 4, 2014 at 6:37:19 PM EDT
    Hardware Information: ?
      iMac (27-inch, Mid 2010) (Verified)
      iMac - model: iMac11,3
      1 3.2 GHz Intel Core i3 CPU: 2 cores
      4 GB RAM
    Video Information: ?
      ATI Radeon HD 5670 - VRAM: 512 MB
      iMac 2560 x 1440
    System Software: ?
      OS X 10.9.4 (13E28) - Uptime: 4 days 8:31:25
    Disk Information: ?
      APPLE HDD HUA722010CLA330 disk0 : (1 TB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted>: 209.7 MB
      Macintosh HD (disk0s2) / [Startup]: 999.35 GB (318.14 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
      OPTIARC DVD RW AD-5680H
      S.M.A.R.T. Status: Verified
    USB Information: ?
      Apple Internal Memory Card Reader
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
      Western Digital My Passport 0746 1 TB
      S.M.A.R.T. Status: Verified
      disk2s1 (disk2s1) <not mounted>: 32 KB
      disk2s2 (disk2s2) <not mounted>: 29 KB
      disk2s3 (disk2s3) <not mounted>: 29 KB
      disk2s4 (disk2s4) <not mounted>: 29 KB
      disk2s5 (disk2s5) <not mounted>: 29 KB
      disk2s6 (disk2s6) <not mounted>: 262 KB
      disk2s7 (disk2s7) <not mounted>: 262 KB
      disk2s8 (disk2s8) <not mounted>: 262 KB
      HD1_Lora (disk2s10) /Volumes/HD1_Lora: 1 TB (467.04 GB free)
      Apple Computer, Inc. IR Receiver
      Apple Inc. Built-in iSight
    Gatekeeper: ?
      Mac App Store and identified developers
    Kernel Extensions: ?
      [not loaded] com.Belcarra.iokit.USBLAN_netpart (2.0.2) Support
      [not loaded] com.Belcarra.iokit.USBLAN_usbpart (2.0.2) Support
      [not loaded] com.RemoteControl.USBLAN.panther (1.6.1) Support
      [not loaded] com.RemoteControl.USBLAN.usbpart (2.0.6) Support
      [not loaded] com.belcarra.iokit.netpart.panther (1.6.1) Support
      [not loaded] com.belcarra.iokit.usbpart.panther (1.6.1) Support
      [loaded] com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
      [loaded] com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
      [loaded] com.techsmith.TACC (1.0.2 - SDK 10.8) Support
      [not loaded] com.wacom.kext.wacomtablet (6.1.5) Support
      [not loaded] com.wdc.driver.1394HP (1.0.11 - SDK 10.4) Support
      [not loaded] com.wdc.driver.1394_64HP (1.0.1 - SDK 10.6) Support
      [not loaded] com.wdc.driver.USBHP (1.0.11) Support
      [loaded] com.wdc.driver.USB_64HP (1.0.0 - SDK 10.6) Support
    Startup Items: ?
      HP IO: Path: /Library/StartupItems/HP IO
    Problem System Launch Daemons: ?
      [failed] com.apple.wdhelper.plist
    Launch Daemons: ?
      [running] com.adobe.ARM.[...].plist Support
      [loaded] com.adobe.fpsaud.plist Support
      [not loaded] com.adobe.SwitchBoard.plist Support
      [loaded] com.macpaw.CleanMyMac2.Agent.plist Support
      [invalid] com.oracle.java.Helper-Tool.plist
      [running] com.sophos.autoupdate.plist Support
      [running] com.sophos.configuration.plist Support
      [running] com.sophos.intercheck.plist Support
      [running] com.sophos.notification.plist Support
      [running] com.sophos.scan.plist Support
      [running] com.sophos.sxld.plist Support
      [running] com.sophos.webd.plist Support
      [failed] com.vmware.launchd.vmware.plist Support
    Launch Agents: ?
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [running] com.adobe.AdobeCreativeCloud.plist Support
      [loaded] com.adobe.CS5ServiceManager.plist Support
      [loaded] com.hp.messagecenter.launcher.plist Support
      [invalid] com.oracle.java.Java-Updater.plist
      [running] com.sophos.uiserver.plist Support
      [running] com.wacom.wacomtablet.plist Support
    User Launch Agents: ?
      [loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.adobe.ARM.[...].plist Support
      [loaded] com.adobe.ARM.[...].plist Support
      [running] com.akamai.single-user-client.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
      [loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
      [loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
      [running] com.spotify.webhelper.plist Support
    User Login Items: ?
      Garmin Express Service
      Monotype SkyFonts
      Dropbox
      HP Scheduler
    Internet Plug-ins: ?
      WacomNetscape: Version: 1.1.0-5 Support
      Google Earth Web Plug-in: Version: 6.0 Support
      Default Browser: Version: 537 - SDK 10.9
      OfficeLiveBrowserPlugin: Version: 12.3.6 Support
      WacomSafari: Version: 1.1.0-5 Support
      AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
      FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
      AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 Support
      Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
      Flash Player: Version: 14.0.0.145 - SDK 10.6 Outdated! Update
      QuickTime Plugin: Version: 7.7.3
      iPhotoPhotocast: Version: 7.0 - SDK 10.8
      AdobePDFViewer: Version: 11.0.07 - SDK 10.6 Support
      GarminGpsControl: Version: 4.1.0.0 Release - SDK 10.7 Support
      JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
    Safari Extensions: ?
      iSkyDeluxe
      Searchme
      Amazon Shopping Assistant
      Ebay Shopping Assistant
      Slick Savings
    Audio Plug-ins: ?
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins: ?
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    User Internet Plug-ins ?
      Picasa: Version: 1.0 - SDK 10.4 Support
      Google Earth Web Plug-in: Version: 7.1 Support
    3rd Party Preference Panes: ?
      Akamai NetSession Preferences  Support
      Flash Player  Support
      Growl  Support
      MacFUSE  Support
      WacomTablet  Support
    Time Machine: ?
      Skip System Files: NO
      Mobile backups: OFF
      Auto backup: NO - Auto backup turned off
      Volumes being backed up:
      Macintosh HD: Disk size: 930.71 GB Disk used: 634.42 GB
      Destinations:
      My Passport for Mac [Network] (Last used)
      Total size: 2 TB
      Total number of backups: 53
      Oldest backup: 2013-10-29 03:57:03 +0000
      Last backup: 2014-04-22 09:31:43 +0000
      Size of backup disk: Too small
      Backup size 2 TB < (Disk used 634.42 GB X 3)
      Time Machine details may not be accurate.
      All volumes being backed up may not be listed.
    Top Processes by CPU: ?
          2% WindowServer
          0% Core Sync
          0% Creative Cloud
          0% InterCheck
          0% Garmin Express
    Top Processes by Memory: ?
      147 MB Finder
      139 MB Mail
      102 MB Google Chrome
      98 MB InterCheck
      98 MB WindowServer
    Virtual Memory Information: ?
      126 MB Free RAM
      1.00 GB Active RAM
      872 MB Inactive RAM
      629 MB Wired RAM
      17.78 GB Page-ins
      645 MB Page-outs

    You need to completely uninstall everything Sophos. It is not needed on OS X and can negatively impact proper OS X operation and performance
    http://www.sophos.com/en-us/support/knowledgebase/119182.aspx
    You also need to completely unistall CleanMyMac2. Macpaw's uninstaller is garbage. Search for and Download and install an app called FindAnyFile and use this to search for a delete files with the names CleanMyMac2 and MacPaw to completely rid yourself of the piece of paid "garbageware".
    FIndAnyFile
    http://apps.tempel.org/FindAnyFile/
    Apps like MacKeeper or any other maintenance apps like CleanMyMac 1 or 2, TuneUpMyMac, MacCleanse or anything like these apps, installed on your Mac, while they appear to be helpful, can do too good a job of data "cleanup" causing the potential to do serious data corruption or data deletion and render a perfectly running OS completely dead and useless leaving you with a frozen, non-functional Mac.
    Plus, these type of apps aren't really necessary OR needed. They really aren't.
    There are manual methods to clear off unnecessary data off of your Mac that are safer and you have complete control over your Mac and not just leave a piece of auto cleaning software in charge of clearing off data off of your Mac. Their potential of causing OS X issues outweighs the implied good and benefits these types of hard drive or memory "cleaning" apps are written to do.
    These types of  system 'cleaning" apps are very poorly written and are really a scam to rob newbie and novice Mac users of their hard earned cash for a poorly written maintenance program that will do much more harm to a perfectly normal running OS X system than the good that the app developers purport these types of apps will do.
    Plus, the software companies that write these apps make it hard to easily uninstall these apps if something DOES go wrong and these apps work in a way where you have no recovery or revert function to return your Mac back to its former, working state in the event something does go wrong.
    It is best to never, EVER download and install these types of apps.
    The risk to your system and important data is too great a risk!
    Here are some general tips to keep your Mac's hard drive trim and slim as possible
    You should never, EVER let a conputer hard drive get completely full, EVER!
    With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
    If it does, it's time for some hard drive housecleaning.
    Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
    Have you emptied your Mac's Trash icon in the Dock?
    If you use iPhoto or Aperture, both have its own trash that needs to be emptied, also.
    If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
    If you are an iMovie or Final Cut user, both have its own individual Trash location that needs to be emptied, too!
    If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
    Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
    Look through your other Mailboxes and other Mail categories to see If there is other mail you can archive and/or delete.
    STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
    Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
    Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
    Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
    To find other large files, download an app called Omni Disk Sweeper.
    http://www.omnigroup.com/more
    Download an app called OnyX for your version of OS X.
    http://www.titanium.free.fr/downloadonyx.php
    When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
    Typically, iTunes and iPhoto libraries are the biggest users of HD space.
    move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
    If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
    Moving iTunes library
    http://support.apple.com/kb/HT1449
    Moving iPhoto library
    http://support.apple.com/kb/PH2506
    Moving iMovie projects folder
    http://support.apple.com/kb/ph2289
    Good Luck!

  • Looking for advice on fixing my Ibook

    Hello all,
    First post here and it's going to be a long one, so I apologize in advance for that and thank anyone who manages to wade though to give advice. Trying to get as much info into this to hopefully help you help me.
    I have an Ibook G4 that was handed down to me in the last year due to my old comp dying. It was working perfectly until approximately one month ago.
    The issues started with the original hard drive. Without doing anything new on my computer I started randomly having strange issues with various apps. I rebooted the computer and got the kernel panic message telling me to reboot the computer. I did so and then immediately went to the ?/finder icon screen. After trying Disk utility from the disks that came with the laptop, I just got errors when trying to repair the disk and repair permissions was not even available.
    I took my laptop into my local apple store for advice and after they saw what it was doing they told me my hd had failed and offered to happily replace it for somewhere around $200. I happily thanked them for their help and went on my way.
    I picked up a western digital 160 gig eide drive and installed it myself without problems. I was able to install the os from the included disks and then upgraded to 10.4 plus all downloaded updates. It worked fine for a couple days and then I decided all was well so started adding music to itunes since I finally have the hd space to add new music to my ipod. After a couple days of use Itunes started giving me errors while changing songs in Itunes and while clicking on any screen other than Itunes. Firefox then started acting strangely so I decided to reboot.
    I was unsuccessful at getting fully loaded in again so I booted from the included disk and repaired permissions and disk using disk utility. This fixed the problems temporarily, however itunes was immediately giving me the error messages again. Continue forward a bit and now I get errors in disk utility saying that it failed to repair the disk.
    I then gave up and decided to just wipe the drive and start over again. I used the erase the writes 0's over the whole drive which errored out towards the end. I suspected I might just have a bad drive but decided to reboot and just erase (basic quick one), partition, and install the os. That install also failed towards the end of disk one install. Went into best buy where I bought the hdd for advice and they agreed it sounded like a failed hdd too. Bought another one (to return the prior one for a full refund after I swap it out) and install it.
    At this point I am getting pretty comfortable to dismantling this laptop so it only takes me around 1.5 hours or so fortunately, however as soon as I got the hd installed and tried to format in disk utility it wouldn't even show up on the screen even though I could hear it spinning. I was suspicious of the hd cable since it just doesn't seem like there is enough of it to make a good connection to the logic board, so I took the bottom of the comp off and just messed with the cable/logic board connection a bit. This was able to get the hd showing up in disk utility.
    Got 10.3 and downloads installed because I don't have the 10.4 disk with me right now. Every time the computer rebooted during the update process, it went to the ?/finder icon screen. I had to hold down the power button to shut down and then power back up after which it would boot up fine. Already concerned about what this meant but just went with it.
    Due to the issues I haven't tried installing anything else or even using many apps. I downloaded firefox and a couple other dmg's in preparation for upgrading the os in the morning. I moved a couple of those files to my partition successfully but after trying to move a final one the finder locks up. Nothing would load after finder reloaded so I rebooted. Now the computer just goes to the gray screen with the apple on it and a loading circle on the bottom but never gets past it. I also periodically get the kernel panic reboot computer message on this screen as well (not every time though)
    My next step for trouble shooting will be trying to pick up a new hd cable, however this may be difficult without access to a computer I can do online ordering on.
    Now for some of my thoughts. After all of that and many many hours spent using google and searching these forums I have seen a couple suggestions which could apply. The kernel panic messages could indicate that I am having memory issues, however I just can't see where that would cause files getting corrupted and causing me to have to repair permissions and disk. I can see where the hd cable failing could be causing issues, but I don't understand how that could account for everything when I don't even move the computer and it starts having issues.
    I am to the point of desperation with this computer. I want nothing more than to just throw it on the ground and jump on it and maybe introduce it to a sledge hammer, however I just cant fit in purchasing a new computer right now. Paying my local apple store hundreds of dollars to try to fix something they may not even be able to fix also just doesn't seem like a viable option when I feel capable of fixing a large portion of issues myself (more familiar with pc's at this time unfortunately though).
    Thanks to any of you out there who make it through this book where I probably give far too much detail. I am open to any advice you have to give to me at this point for where to go from here.

    There's the possibility that the new hard drive you purchased has a problem. The only way to really check that is with another computer with no known issues.
    Do you need the computer to be portable? If so, pick up a portable enclosure. Otherwise, any enclosure that will house the hard drive would be fine. Get the drive into the enclosure, then install the OS to it. If it runs fine while in the external enclosure, there's some connection inside the machine--possibly the cable--that has failed you. If you still have problems when the drive is in an enclosure, that suggests a problem with some part of the logic board or perhaps the drive itself is faulty.
    ~Lyssa

  • Looking for M50 bios file 2ajt51a.exe

    I need the file 2ajt51a.exe to create bootable diskette version of BIOS update for a Model 50 8187
    desktop. This older model is not listed under the support downloads section. Could someone please provide
    a link to a download for this file?
    Thanks for your help

    Anyone with the dv4-1125nr files  please I am going crazy listening to beeping with no success maybe im just unfortunate but if you have the magic file i would really appreciate it thanks - black screen on boot  my luck its the problem where the chip has a weak soder and seperated from the board who knows what a piece of work

  • I am looking for new BIOS for HDD STORE TV

    I have multi HDD STORE TV, but I am not satisfied it, because it supports very very limited number of formats.
    Unfortunately does not read MKV and many other formats.
    May be at somebody have new BIOS for it or from another HDD compatible that reads more formats?
    I will be very grateful.

    >May be at somebody have new BIOS for it or from another HDD compatible that reads more formats?
    If something like that would be available, then you would find this on the Toshiba European driver page in the download area.
    http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
    Choosing Options -> Drive Devices -> Multimedia HDD -> 3.5 StorE TV you would get the software related to this option part but as I can see there are no updates for this time

  • Looking for Custom BIOS for Laptop *MSI GE70 Apache Pro 061* Win 8.1 64

    I installed two G Skill Ripjaws 8GB 2133 Mhz Ram chips into my Apache Pro laptop. The speeds only show up as 1000 Mhz. I am trying to get a custom BIOS so I can make the necessary changes to that will allow my memory to run up to speed. Can anyone out there help me out with this? Thanks.

    Thanks, Nichrome. However, the price difference between 1600 Mhz and 2133 Mhz was not much at all. I've future proofed myself if I decide to upgrade the CPU or even get a better laptop down the road. These ram sticks should at least be backwards compatible to 1600 Mhz, but still I'm not able to make it run at that speed. I'm still going to need a custom BIOS to make those changes. I appreciate the reponse, nonetheless.

  • I am looking for GOP BIOS for GTX760

    Hi,
    As the subject...
    I have instaled Windows 8.1 Pro update (before I had Windows 8.1 Pro). After that in the right bottom corner of the screen strange strange inscription appeared:
    "Windows 8.1 Pro
    SecureBoot function is not correctly configured
    Build 9600".
    I tried to turn on the SecureBoot function in BIOS but I could only see the information, that my video card isn't compatibile with that function, because of GOP BIOS lack. So....
    It would be great if somebody give me proper GOP BIOS and tell me how I can save it in video card. Below necessary data:
    Graphic card serial number:  602-V284-46SB1306014702
    BIOS version:  80.04.BF.00.0D (P2004-0010)
    I can,t put BIOS file (link)...
    Does such operation (changing the bIOS) has any impact BIOS?

    OK. I found out how I could give the link to ROM 
    hxxps://skydrive.live.com/?cid=1c0b9401dd22bf78&id=1C0B9401DD22BF78!1255&Bsrc=Share&Bpub=SDX.SkyDrive&authkey=!AvrE-YLvbYNZFJA
    "Does such operation (changing the bIOS) has any impact BIOS?"
    Heh, written to fast... Of course the question is: does such operation impacts card guarantee?

  • Looking for DV4 BIOS files

    hi there, 
    bricked my DV4-1028us using HP's bios update
    and now i cant find sp41969.exe on the software support page and HP's ftp site,,,
    can anybody send me the file so that i can try the solutions posted here...
    {Personal Information Removed}
     big thanks in advance

    Anyone with the dv4-1125nr files  please I am going crazy listening to beeping with no success maybe im just unfortunate but if you have the magic file i would really appreciate it thanks - black screen on boot  my luck its the problem where the chip has a weak soder and seperated from the board who knows what a piece of work

Maybe you are looking for

  • How to send report using OBI EE Delivers to NON-OBI EE users

    Help!!! I have followed all the instructions posted. I have setup SA Systems. Delivers / iBots works using our SA_SYSTEM_USERS table. Yes, I have the column names correct. Yes, have setup the iBot correct. I have a list of 4 users. 2 users are vaild

  • VI01 - No service PO in it

    HI all, when saved shipment cost document I cannot find service PO in reference tab.Why service PO is not created.Did I missed any settings (Service vendor exists)any helps?

  • Premiere Elements 12 ne veut plus s'ouvrir : "Adobe Premiere Elements Editor a quitté de manière imprévue" (Mac OS 10.9 - iMac 2013)

    Bonjour à tous, Premiere Elements 12 ne veut plus s'ouvrir : Dès le lancement de l'appli, j'ai le message "Adobe Premiere Elements Editor a quitté de manière imprévue" (Mac OS 10.9 - iMac 2013) J'ai désinstallé / réinstallé / redémarré : rien à faire

  • CS3 Bridge - Preferences crashes program

    I cant seem to open 'Preferences' in Bridge - whenever I try to, Bridge immediately closes. I dont have this problem if I select Camera Raw Preferences, nor if I select Preferences in Photoshop. I am using CS3 on a Mac running OS Tiger. Ive had the p

  • Build problem with external JAR

    Hello, I am developing a custom web dynpro component. I need to use some of the JARs delivered by SAP such as com.sap.security.api (can be found in \SAP\IDE\IDE70\eclipse\plugins). I have included the JAR files to my project in Properties->Java Build