Looking for a "buzz the secretary" feature
I have a customer (law firm) who, on their existing PBX, can contact the secretary w/o exiting a call (e.g. buzz the sec to retrieve a fax while client is on the line. Anyone seen a feature/software/solution that would do this.
Yup, this is the way I did it with the Executives and Admins... it's kind of pain in Callmanager, but it works fine. Extra PT's, extra CSS, assign the non dialable numbers to the lines, etc. If you follow the PLAR guide it
Similar Messages
-
Looking for something in the iPad/iPhone Airport App
Hi
I have been waiting for the airport utility for iPad/iPhone to come as I frequently travel with just my iPad and Airport Express. However, I have been unable to configure it when away from home.
So, Apple has released a utility but it appears to be the most important feature for being on the road, that is, the ability to switch connection sharing (so you can hook up to a hotel system).
Is it that I can't find it or it doesn't allow you to do it. In the iPad app, I am looking for the ability to switch between bridge mode and the other two.
Thanks,
AndrewTesserex, thanks for the comment . Can you point to where in the utility I cna figure it to
Share a public IP address
Distribute a range of IP addresses, or
Be off in Bridge mode?
Thanks,I can't work it out.
Re: Looking for something in the iPad/iPhone Airport App
created by Tesserax in AirPort - View the full discussion
The AirPort Utility App that is available with iOS 5 does pretty much everything that the Mac or PC versions do including controlling both the NAT & DHCP services to allow you reconfigure an AirPort as a bridge. -
How can I download my TV episodes to my Macbook Pro. I bought them from my iPad2, and I looked for them with the same AppleID on iTunes Store and they wont download to my iTunes.
What country are you in ? Depending upon what country that you are in then you might be able to redownload them on your Mac's iTunes via the Purchased link under Quicklinks on the iTunes store homepage
If you're not in a country where TV programmes can be redownloaded then connect the iPad to your Mac's iTunes and use the File > Devices > Transfer Purchases to copy them over from your iPad -
I have a MacBook Pro 5,4 running OSX 10.6.8 and Safari 5.1.10. A website i like has a known bug with 5.1.10 and recommends I install a newer version of Safari or use Firefox or Chrome. Just looking for advice on the best approach. Thanks!
Unfortunately, Safari cannot be updated past 5.1.10 on a Mac running v10.6.8.
So, the options are to upgrade to a newer OS X or use Firefox or Chrome.
Be aware, Apple no longer support Snow Leopard v10.6 > www.ibtimes.com/apple-kills-snow-leopard-os-x-106-no-longer-receives-security-u pdates-1558393
See if your Mac can run v10.9 Mavericks > OS X Mavericks: System Requirements
If so, you can download and install Mavericks for free from the App Store.
Read prior to upgrading > Upgrading to 10.7 and above, don't forget Rosetta! | Apple Support Communities -
so i connected my ipod shuffle to my apple computer and the status light on my ipod shuffle shows that it is charging but when i look for it on the pc dock or in itunes it doesn't show it at all.... so what do I do???
If you have not already, I would shut down (power off) your computer. Do this to Reset your shuffle
http://support.apple.com/kb/HT1655
Start up computer. Run iTunes. Connect shuffle.
If you have added a new USB device recently (since the last time it worked properly), you may want to try disconnecting it to see if that makes any difference. -
Question.
I look for integrated in the legend bloc of diaporama, a widget such as "Accordion" for, with a click, or passing with mouse, open a new legend for each photo. I tried with "Accordion" of Muse, it does not work. I tried copy/paste, mais no result. The widget disappear in bloc legend. disparaître. Have you one solution?
Thank you,
LoïcAccordion or Tabbed panel should to it, with click and open container.
Please provide site url where this does not work, also if you can provide an example where we can see the exact action then it would help us.
Thanks,
Sanjit -
My MAC keeps looking for networks? The ICON in menu bar when clicked shows the WI-FI (in grey) it keeps shuting off and disconnecting. Any Ideas???
Test after taking each of the following steps. Back up all data before making any changes.
1. Make sure the network is on the preferred list by following these instructions.
2. Follow the instructions in this support article under the heading "Symptom: The network connection drops unexpectedly."
3. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
4. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
5. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
6. In some cases, the problem has been resolved by repairing permissions on the startup volume.
7. Reinstall OS X. -
[ANN] Adobe is looking for developers in the Boston area for a User Research study
Adobe User Research is looking for developers in the greater
Boston area. We will be running site visits the week of February
11th and would love to spend two-hours with you at your place of
work. What we are looking to do is get a better understanding of
how you work, what your processes are in your natural environment.
We will gladly thank you with some Adobe software as well as
some other Adobe goodies. If you are interested in our study and
are able to host a small team of Adobe User Researchers please send
me an email at
[email protected]
Please note that we are looking to run these studies the week
of February 11th.
If you have any questions at all, please do not hesitate to
email me at
[email protected]If you come to the Ann Arbor area, give me a call (University
of Michigan)
"Tim Toy" <[email protected]> wrote in
message
news:fntr3u$d3j$[email protected]..
> Adobe User Research is looking for developers in the
greater Boston area.
> We
> will be running site visits the week of February 11th
and would love to
> spend
> two-hours with you at your place of work. What we are
looking to do is
> get a
> better understanding of how you work, what your
processes are in your
> natural
> environment. We will gladly thank you with some Adobe
software as well as
> some
> other Adobe goodies. If you are interested in our study
and are able to
> host a
> small team of Adobe User Researchers please send me an
email at
> [email protected]
>
> Please note that we are looking to run these studies the
week of February
> 11th.
>
> If you have any questions at all, please do not hesitate
to email me at
> [email protected]
>
>
>
>
> -
PSE 6 wants to look for reconnections on the wrong hard drive
I recently installed a new 500 GB hard drive. I want that to be my new C [main/boot] drive and managed to accomplish this with some changes to the boot.ini file. My original C is now named J and is a 120 GB hard drive that I wish to use to backup pictures. I have an identical set of digital pix on both the new C and J.
The problem I'm having with PSE 6 is that following a digital picture download to my new C, the thumbnails show up in PSE 6, but when I attempt to print one, the recently downloaded files are noted as disconnected. When I try to reconnect, I find that the photos were indeed downloaded to my new C drive, but PSE 6 lists them as connected to the J [old C]. When I try to navigate the reconnect process to the proper hard drive, the button grays out and nothing happens. I went to Edit>Preferences>Files>Folders for saved files and navigated to the new C and confirmed that is was set as the location for the stored files. It seems that no matter what I do, PSE 6 wants to look for everything on the old C, now called J.
Any thoughts on why this is happening and how I can fix it?
Thanks for any and all help.John,
At long last, here is the output.log that I typed in. For some reason, the site will not let me paste anything in it. And, as I indicated earlier, any emails that I've sent by hitting REPLY keep bouncing back.
Again, thanks for any help.
Larry
START
output.log
psedbtool version 1.05
Opening catalog C:\Documemnts and Settings|Larry|Application Data\Adobe\Photoshop Elements|Catalogs\LPY Photo Catalog-1\catalog.psedb
Photoshop Elements version : 6
Total files : 22675
Total files missing : 423
Total files offline : 1
*****Volumes with warnings : 2
PSE Volume Table
Path used by PSE : [E : ]
Status : offline
Total files : 1
Total files missing : 0
Description : E:
Serial : 2AF8-D2D9
Drive_path_if_builtin :
Type : readonly_drive
ID : 125494
Path used by PSE : H :
Status : online
Total files : 0
Total files missing : 0
Description : H:
Serial : CED7-425F
Drive_path_if_builtin : H
Type : builtin_drive
Id : 70172
******WARNING******* : wrong serial number in catalog
Path used by PSE : J
Status : online
Total files : 22674
Total files missing : 423
Description : C:
Serial ; E4AD-EB12
Drive_path_if_builtin : C :
Type : builtin_drive
Id : 4119
******WARNING***** : wrong drive letter in catalog
Windows Drives
Drive Type Serial Path
A: removable_drive 0000-0000
C: builtin_drive 70BC-7478 This is my new 500 GB HD that I want to be the primary HD. D removable_drive 0000-0000 Zip drive
E: readonly_drive 0000-0000 DVD drive
F: readonly_drive 0000-0000 DVD/CD-RW drive
G: removable_drive 0000-0000 Compact flash card reader
H: removable_drive 3B69-1AFD Flash drive
I: builtin_drive B33C-2AA2 External hard drive
J: builtin_drive E4AD-EB12 Original 120GB HD where RECONNECT searches get directed to.
END OF OUTPUT LOG -
I am very sure I have " find my iPod" on my iPod device but , it's not coming up when I try to look for it in the radar?! Unfortunately my iPod was stolen at school. Any help
lost/stolen
No app on the iPod is required.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or conbtinue to show off-line.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
iCloud: Erase your device
iCloud: Use Lost Mode
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number -
Looking for info on the msi 970 gaming .
Looking at the msi gaming 970 as a GPU. I know about the ram issue. Looking for info about the card in general (persons perspective ). Like how does it overclock, cooling, bios updates, warranty and so on.
My specs
4790k-4.0
gigabyte z97 black edition MB
8gb gskill
WD valaciraptor HD
Thanks.Cooling: It has very good cooler (better than 780Ti which I own) so surely low temps (<70C with fans 35%~ )
OC: It's a gamble. One can overclock better than the other
Warranty: As far as I know, 1 year with seller and further 1 year directly with MSI
BIOS updates: it's new card so rarely any updates right now, but there are some if something is being fixed/improved.
Should work fine in your system, no bottleneck with i7 4790
Just depends if you look at reference design or Gaming series. -
I'm looking for support on the app "the vault" . The app does not restore.
I'm looking for support for an app "the vault". It does restore past data. I have paid and initiated restore feature.
Your best bet is to contact the developer for assistance. It is not an Apple product.
-
I updated to Yosemite on my Mac mini/server. Then my server wouldn't work. I updated and bought the software needed when updating to Yosemite. The server seems to be working. Subsequently I've started getting a notification on the server icon that an update is needed. When i look for details I'm instructed to go to the app store. I've done that. In the updates category no update is found by the app store system. I then went to the purchases category and was informed I needed to install the server software I'd purchased. While I'd installed before, I did it again. I still have the 1 in a red circle covering part of the server icon. I have restarted the mac mini. I can't figure out what step I'm missing. The continued presence of the red circle suggests that the software still isn't installed. Looked into restarting the server in help but don't find clear instructions that make sense. Suggestions from someone who has a mac mini server and has worked with this topic would be greatly appreciated. General comments from anyone who has not looked at this kind of problem before might turn out to be unenlightening for this neophyte.
I tried turning the computer off and then back on. The alerts don't show the notice to update as resolved. Hopefully this is not a problem or an indicator or another problem. Should I ignore or reload 10.10.1 from the app store to trigger a resolved check in a green circle?
Interesting that I had to buy server software after my free Yosemite download. I would have hoped that the two pieces of software would have gone together without any complication. It is not positive to end up buying a problem. Ah well, time to move on. -
Looking for an app the play iTunes TV shows.
Hi, I'm looking for an app that play iTunes TV shows. In iOs 7 its no longer possible, well it is, but every 11 minutes you have to get up and press the next tv show - if you find the next one, under ios6 it will automatically play the next show in correct order, and in iOs 7 all the shows are alphebetically, so in iOs 7 video app is tootally useless, what wants to watch tv shows alphabetical, and there is no continue button like in os 7, usually the next night I press the continue button in iOs 6.
The app I am looking for needs to have the same things like video app did in iOs6, for example;
1. Continue from last played (Works in iOs6, no longer supported in iOs7).
2. Sort shows from 1 to xx via episode number (Works in iOs6, no longer supported in iOs7).
3. Remember last played show, meaning if I scrolled down to middle and played just 1 show it remembers it (Works in iOs6, no longer supported in iOs7).
4. Prefer black background and not white like in iOs6, especially if your sleepy, do you really want to look at a painful white background.
Just imagine your taking a bath, do you really want to get out and press the next show? Worked perfect in iOs6.
I tried VLC and it can't even find the iTunes library. And there are so many players out there don't feel like downloading 100 of them to test them. Unless there is a way to download the iOs6 version of Video, I'd be happy. iOs 7 feels more like a beta version, even photos is messed up, white background and sometimes when you open up you see a previous picture I had opened before the last picture for 1 second before it closes and opens the last picture I viewed, and then the white bars top and bottom show and don't dissapear until you make them disappear.
I tried installing iOs6 again, but apple is not signing it, i'm not happy at all. If I can get my TV-Shows to work at least I'd have something. Music, TV-Shows, and Pictures is what I used my iPad for, now only Music still works as it should, what a bummer. Steve Job needs to come back.
Please help, I want my TV shows back.http://www.tvcatchup.com/iphone.html
-
Looking for examples of the Exchange Page
Hey! Any Body??
I am looking to display data like on the Exchange page with
logo and links in the tables. Does any one know of where I can
start looking for something like that? I like the layout of the
Exchange page. If any of you know something please let me know.
thanks.You can find several examples that will work with the DAQCard-1200 at zone.ni.com/libraries/.
Then look under Data Acquisition. There are also examples that ship with
LV and NIDAQ. Look in ...\Labview\examples\daq\anlogin\.
"david frazao" wrote:
>Thank you , if you can help me by sending VI examples for the 1200 daq-card>,
with 2 or mores inputs>>
Maybe you are looking for
-
How To install Oracle 8.0.5. on S.u.S.E. 5.3
Oracle 8.0.5. Installation on S.u.S.E. Linux 5.3 ================================================= After strugling for 3 weekends with the installation of Oracle 8.0.5. on a S.u.S.E. 5.3 distribution here are the installation steps that worked for me
-
Why does Photoshop crash when downsampling large images?
My Mac: Model Name: Mac Pro Model Identifier: MacPro3,1 Processor Name: Quad-Core Intel Xeon Processor Speed: 2.8 GHz Number of Processors: 2 Total Number of Cores: 8 L2 Cache (per Processor): 12 MB Memory: 14 GB OSX 10.9.5 Photosho
-
Using Apple Mac Developer account for code signing
Has anyone been using their Apple Mac Developer account for code signing and Adobe Air desktop App? Any hints, tips comments appreciated!
-
HTML5 Canvas: Calling a parent function
Hey guys I'm currently banging my head against a brick wall trying to call a parent function with the HTML5 Canvas. I have the following code on the stage: function fromStage() console.log("This is on the stage"); fromStage(); This correctly output
-
Hi, I have the following VI It runs fast enough on a fast PC (duo core 2) but it doesn't run fast enough on my laptop. Is there a way to optimize this? Best regards, Thijs Solved! Go to Solution.