Looking for a cable that does audio out from the dock connection

I would like to use the iphone with the aux in on my car stereo. I have my iphone in a proclip cradle that is mounted to the dash. I would like a cable that plugs in to the dock connection on the bottom of the iphone and goes into the aux in on the front of my car stereo. I really don't want to use the headphone jack on the top since I have to use the adapter, and after you plug that in to the iphone, and then the cable into that, it sticks up like a mile in the air. Does anyone know of any cables that will work for me??

I have an old 512 MB iPod Shuffle that I gave my 8-yr old son and as well as an iPod Nano that I recently purchased for my daughter. I tried to use my car AUX (Honda Jazz) to play from my iPhone and looks like it does not work for my iPhone (yes, I made it to work in Vodafone network in New Zealand). Then I tried with the old iPod shuffle and it works fine as well. Lastly I tried with iPod Nano and looks like it works with iPod Nano as well. Later I tried with a Samsung headphone to see if it did work with my iPhone (instead of iPhone headphone), it worked well. I am not sure what to do now. I might call Apple to see if they have anything that'll work for iPhone.
Cheers,
S

Similar Messages

  • System keeps looking for a 'server' that does not exist. Is says the old name of my Airport Extreme. Clicking it away (4x) it gets through.

    System keeps looking for a 'server' that does not exist. Is says the old name of my Airport Extreme. Clicking it away (4x) finally  gets through.

    Other weirdness to report: my neighbor upstairs appears to have a Linksys router network on channel 6. My AEBS is on channel 1 so there shouldn't be interference... but according to iStumbler sometimes the signal leaps to 64000 (keep in mind my own Airport never tops 60)! Is that potentially the problem?
    Might it be possible that your neighbor just acquired a 802.11n (pre-N) wireless router recently?
    802.11n effectively increases capacity by doubling the number of Wi-Fi radios and increasing the number of antennas used to push signals out of those radios. 802.11n splits a data frame into multiple pieces. It then transmits these pieces in parallel using multiple radios that are attached to multiple antennas. These antennas blast out signals from virtually the same vantage point – scattering the signals everywhere.
    You may find the following ZDNet article interesting: http://blogs.zdnet.com/Ou/?p=247
    Even if he did not, and you are on good terms, you might want to ask if he can temporarily turn off his wireless, or, at least, reduce the signal strength to see if that will help in your situation.

  • Looking for a app that will go out and get all my credit card balances.

    I am looking for a App that can go on all the web sites for my Credit Cards and download the balance Interest Rate Payment.....
    Anyone know of a good one?

    I recommend that instead of working on an iPad application you get a good web programmer in and set up a web-facing system that can be used from anything with a web browser --  an iPad, a smartphone, a laptop or a desktop.  Then your employees can access the system from any computer with a web browser, and you don't need to employ an expensive specialist programmer to produce a system which is useless for devices made by other manufacturers.  The only requirement for use will be that your devices must in range of either WiFi or a phone signal.
    It will also mean that if you need to change your software at any time you only have to change one copy, back at headquarters, rather than update an App on every individual iPad.
    Apple's web browsers (including the ones built into iDevices) allow a web site to request the user's location, so people using an iPad should be able to do the things you have asked for.

  • Hola a todos , busco una manera de crear un pdf desde la impresora de ios, como lo puedo resolver, gracias. Hi all, I look for a way to create a PDF from the printer ios, as I can solve, thanks

    Hi all, I look for a way to create a PDF from the printer ios, as I can solve, thanks

    Try this process on your Mac. These files will be regenerated by Mac OS X with default settings.
    1. Quit the Mac App Store
    2. Trash the following folders and files; (~ is your Home folder)
    ~/Library/Caches/com.apple.appstore
    ~/Library/Caches/com.apple.storeagent
    ~/Library/Cookies/com.apple.appstore.plist
    ~/Library/Preferences/com.apple.appstore.plist
    ~/Library/Preferences/com.apple.storeagent.plist
    ~/Library/Preferences/com.apple.streagent.plist.lockfile
    Mac HD/Library/Preferences/SystemConfiguration/networkinterfaces.plist
    3. Restart your Mac
    4. Open the Mac App Store
    5. Log into your MAS account

  • Looking for a script that get images' urls from a website

    Hi,
    I have a website where users can insert theirs hotel informations.
    Most of them do not insert photos, I guess because the procedure is quite long and difficoult for the average user's skills.
    I'm looking for a script that take as input the url of the website and give as output the urls of the images of the site, so the user can decide which to upload on his tab.
    Someone can help me?

    La_Salamandra wrote:
    I have a website where users can insert theirs hotel informations.
    Most of them do not insert photos, I guess because the procedure is quite long and difficoult for the average user's skills.
    I'm looking for a script that take as input the url of the website and give as output the urls of the images of the site, so the user can decide which to upload on his tab.
    Someone can help me?
    You have to improve your design. Even if you can find the Coldfusion code, your design will still fall short in 2 ways.
    First, it is unreliable, because you're depending on some arbitrary site to be available and up to speed. Secondly, it is aesthetically wrong to be collecting pictures, especially large numbers of them, dynamically from someone else's site.  Think of their copyright and bandwidth.
    Fortunately, there are simple solutions. First, identify, by eye, the web pages containing the pictures you're interested in. Ask for permission from the owner.
    You could indeed use Coldfusion's cfhttp or any other script to download the JPGs, PNGs, and so on. But then, why waste your time re-inventing the wheel? It is infinitely better to use a web crawler !
    With most crawlers, you only have to supply the URL of the site, and the file extensions it has to grab (in your case, jpg, png, bmp, and so on).
    One click on the button, and you have them reeling in. Automatically. Some crawlers are considerate enough to enable you to adjust the download bandwidth. (We can learn from a million years evolution wisdom. The vampire bat is known to inject a painkiller before sucking!).
    Now that you've downloaded the images to your site, the links you display to your users are all yours. You may choose to resize some of the images, display them as you wish, and the issues of reliability and bandwidth are now up to you.

  • Need an app to edit and sign word documents (sign with stylus)! Notability let's me sign but doesn't pull up letter head, quickofficepro let's me edit but not sign. Looking for an app that does both

    I am looking for an app where I can edit word documents as well as sign them.  I am a physical therapist whose looking to cut down on paper work.  Someone types my evaluations and then we print them out for me to edit by hand and then they go back and make the corrections on the computer then w print them and sign them to send off.  Recently I have begun using apps where I can pull up the document and edit it thru quickofficepro or through cloudon, but I cannot sign them using a stylus pen.  I also have notability which I can use to sign the documents, but it doesn't save the document as a doc, it's either a PDF or rtf. Also, in notability, it doesn't pull up the letter head for our company which is a template with our logo on it.  So I need an app where I can both edit and sign my documents by hand using a stylus.  If someone could provide me with any relevant information I would greatly appreciate it.  Thank you for your time.

    Hi,
    Pages for Mac OS X, the topic discussed in this community won't do it.
    I think you'll have a better chance for a useful answer in either the Using iPad or the iPad in the Enterprise community.
    Regards,
    Barry

  • It it possible to look for a page that does not contain a string?

    Is it possible in the search feature in Dreamweaver CS3 to find all pages that do NOT contain a specific string?

    I don't think so, at least not directly. I could be wrong, Regular Expressions can be pretty powerful, I'm not sure how well they're implemented in CS3 though: http://www.adobe.com/devnet/dreamweaver/articles/regular_expressions_pt1.edu.html
    Maybe you could do a find/replace of that specific string, with itself.
    All of the files that have it would be updated without actually changing the code.
    The Date Modified for the file would change though.
    The files without the string of info you are looking for would have the old modification date.

  • Looking for a BAPI that does the same as /$SYNC

    Dear Experts,
    Could someone tell me which BAPI resets all buffers, I need one just like running /$SYNC. Thanks in advance.
    PS: I use a system for test purpose, not a real one in a company.

    Thanks for your answer Markus. I would like to call the t-code $SYNC out of the SAP GUI, because I am using a webservice to measure the memory used in the buffers, which gives me the same as the transaction ST02 (and I want to avoid the SAP GUI effect on memory usage by using ST02 and $SYNC, for the ST02 I have a BAPI, but not for the T-Code).Then I need to reset the buffers to know how much memory is used by some of my webservices.
    Do you know a way to use this t-code $SYNC out of the SAP GUI?
    PS: I use a system for testing purposes, not a real one in a company. And it's on Unix.
    Edited by: raesna1 on Dec 14, 2010 6:12 PM

  • "Look for libraries to share" does not appear in the Shared pane under preferences.  I'm trying to see my fiances shared library.  She can see mine. I have selected share entire library.  Help please!

    Cannot see my fiance's library but she can see mine.  Checked all appropriate boxes to share entire library.  Help syays to check under Shared which does not even appear anywhere.  It also said to check the "Look for share libraries" under shared pane which also does not exit in that pane. I am Windows 7 and she is Macbook.  Thanks

    I'm using an Airport Extreme, and I'm not aware of UPnP settings in the Airport Utility.
    On the Mac, I set up a Parallels Vista instance in bridged mode and verified that I can see the other Vista PC share folders, so I know that the Vista PC has been set up correctly.
    Additionally, as mentioned before, I switched DNS Servers several times, but settled on an alternative Rogers DNS to avoid their awful failed lookup ad page (64.71.255.202 if anyone needs it).
    I also tried adding the Vista PC IP to my Mac hosts file, which oddly showed the Mac on the Vista side, but nothing on the Mac side.
    I also goofed around in the smb.conf file with some settings, but alas, nada.
    The only thing that might explain why the Airport Express network (Vista, XP) provided me with shares in the sidebar and not my own Airport Extreme network (just Vista) could be that it's a master browser issue. I saw a couple of posts about this.
    If the Vista machine is the master browser, nothing will show in the sidebar, but if XP or a Mac is the master browser, then the sidebar will show shares. I don't have a way to verify this as I'm not sure how to force one machine to be a master browser over another. I'm suspicious if this will do anything as I've found other posts saying exactly the opposite scenario.
    Is there anyone out there that has had a network, possibly with Airport Extreme, one Mac (Leopard), one Vista PC, and Vista share is showing in the Finder sidebar?

  • Audio out from the input jack

    topic decisions are hard... sorry if this is in the wrong place.
    anyways, this is kinda simple. is there any way to naively use my audio input port to listen to on the macbook? by this i mean, plug in an auxiliary cable from an ipod, or even another computer, and listen to the audio it outputs?

    You can use GarageBand to monitor any audio source that is connected to the Mac's input. Make sure your audio input is set to Line In in the Sound Preference panel. Then in GarageBand just select New Track and choose Real Instrument. In the Track Info box, set Monitor to On, and adjust the volume as necessary.
    You can also use QuickTime Player to monitor audio if you get the QuickTime Plus upgrade ($30). Just select New Audio Recording and turn up the volume in the little Audio Recording window.
    Audio monitoring is turned off by default to prevent feedback from the built-in microphone.

  • Is there a good third-party application for recovering items that were inadvertently emptied from the Trash?

    Can anyone give me any advice about trying to recover something from a MacPro operating on Snow Leopard that was inadvertently thrown into the Trash and the Trash was emptied?

    Read
    <https://discussions.apple.com/message/17200989#17200989>
    especially the last four posts.
    (There are also other threads on this topic. Search the forum.)

  • Looking for a recording of "Effortless Video Creation from the Comfort of your Desk"

    "Effortless Video Creation from the Comfort of your Desk" was offered as a training webinar by Dr. Allen Partridge on 9/11/13.  Is there a recording link published anywhere that I can access?
    Thanks,
    Michelle

    I use this. The movie capture capability is expensive, but works well. http://www.ambrosiasw.com/utilities/snapzprox/

  • Looking for a terminal that does not truncate lines when resized

    I am a huge fan of tiling window managers in general and have used dwm exclusively for over a year now. One thing that drives me crazy though is that when I switch a terminal window from being the primary window to a secondary and then back again, all of the lines are truncated to the smaller width. If I am watching a log file for example, this makes the previous output totally unreadable. Does anyone have a solution for this? Is there a way to make the terminal not truncate the lines if resized to a smaller width?
    Thanks!

    Try
    https://bbs.archlinux.org/viewtopic.php?pid=548267
    http://tomayko.com/writings/StupidShellTricks

  • I am looking for video recorder that starts when you open the app

    Id like to be able to use siri to open the app and it start recording video and audio right away for use as a dash cam.
    I know that I can tell siri to start an app, but siri can't control the start and stop of video.

    I don't believe it will open a Word document, but Writepad allows for handwritten conversion of notes to text and then to email. Might help you some of the way...

  • HT2474 I have an application that cannot be removed from the dock.  It is not the finder or the trash icons.  I cannot place it into the trash can either.  Any suggestions?

    I cannot get rid of an icon on the dock.  It is not the finder and it is not the trash.  I tried sending it to the trash can, unsuccessful.  Tried taking it away from the dock without succes either.  Suggestions?

    What is the application?
    Place your cursonr on it and wait.  A little pane will come up to tell you what the application is

Maybe you are looking for

  • How can I use my Ipad in a best way for my presentations?

    I am in need of a good app with which I can make my presentations easier and Interesting to the listeners. I also wanted to know if I could connect my Ipad 2 to a projector device, so that I could bring out the display on to a huge screen to enhance

  • [AIR] May I catch "bring window to front" event?

    Hi, I wonder who is responsible for bringing windows to front when user click on that window (application contains more Windows components inside). Is it operating system or AIR runtime? Or perhaps AIR runtime send event to operating system which doe

  • Decrypt a SOAP response message

    Hello there, We have successfully configured message level security for one of B2B integration interfaces, our partner is able to receive and decrypt/validate our request, and send back the response to us. But the problem now is that the response is

  • Display headers in mail

    how do i turn on 'display headers' in mail? thank you!

  • Submit button within Interactive adobe form

    Hi,     We have developed an Interactive adobe form and inserted a submit button within it We have installed ACI also.We tried putting the submit button both within the adobe form body and also within the webdynpro java view. In both the cases pressi