Looking for a canon with the same features as SD1100IS. What are the next 3 models after SD1100?

Husband's canon SD1100 was stolen. We're trying to replace it with another but 1100s are not available. What are the next 3 or so models past the SD1100 that would have the comparable features, speed and ease of operation?

Hi A-Mo,
I'm very sorry that your husband's PowerShot SD1100 IS was stolen!
The SD camera line has been replaced by the PowerShot ELPH lineup. These cameras are improved in a number of important ways, such as better zoom lenses, and sensitivity to light for existing light photography.
I recommend that you consider the PowerShot ELPH 310 HS. This camera has an 8x optical zoom lens (vs. 3x for the PowerShot SD1100 IS), has a higher ISO of 3200 (vs. 1600) for low light photography and shoots video in "full" high definition (1920 x 1080 resolution) (vs. 640 x 480).
Please note: none of the cameras in this group of cameras includes the optical viewfinder you had on the PowerShot SD1100 IS,
I hope this is helpful.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

What is the use of AET? What are the differences between AET and EEWB?

Hi,
I would like to know about AET? What is the use of AET? What are the differences between AET and EEWB? Please help me out?
Thanks,
Satish

Hi
You can refer the following links for your question.
Difference between AET and EEWB
What is the use of AET? What are the differences between AET and EEWB?
Difference between EEWB - UI Configuration Tool - AET
http://senthilsapcrm.wordpress.com/2010/02/04/adding-custom-fields-in-sap-crm-7-0-using-aet/
What is the main difference between eewb and aet tool ?
Hope it is useful.
Thanks and regards
Preeti Viswanath

HT201272 I have always had and used the same Apple ID, so where are the rest of the songs I bought from itunes? I've bought at least 400 songs and I only am being able to download 178. Where are the rest of my purchases?!

I have always had and used the same Apple ID. I have changed credit card information on my Apple ID account several times though. Does that make a difference when downloading past purchases? I'm very angry at Apple and Itunes because I have been using itunes since 05/2005 and I do not have even close to the amount of songs and albums that I have purchased from itunes. If the credit card info does make a difference even though the account is the same one then itunes needs to make sure to notify users of this because I am not the only one who is wondering this same thing. I have numerous friends who i've talked to about this and they say the same thing, that they too have songs purchased in the past that have disappeared when trying to download past purchased items. It should not make a difference. $12 is $12. Especially since I have ALWAYS used the same account. If itunes does not change their ways, I will not be purchasing songs or anything else for that matter from them ever again. I will go back to buying CDs where I KNOW that it will always be with me and I don't have to deal with this. I will also make sure to find a better more reliable source to download music from and will make sure everyone I know and come in contact with knows what it is and how much better it is than itunes. There should be no experation date on the music I PURCHASE, nor should there be any other little loop holes that allow itunes to rob us of rightfully purchased products. What's the deal itunes??

mannyace wrote:
Thanks for the response.
So I basically won't run into any trouble? I
There should be no issues. Its designed to work like that. You don't change Apple IDs just because you get a new device.
mannyace wrote:
Thanks for the response.
Is there any chance that the phones can fall out of sync?
Unlikely. But nothing is impossible. Though I don;t see how that would happen. As long as both are signed into the Same Apple ID / iCloud Account they will be N'Sync. (Bad Joke)
mannyace wrote:
Thanks for the response.
If I get a message or buy an app or take a photo on the iPhone 5, how do I get those things onto the iPhone 6?
If you buy an App, you have 2 ways to get it to the iPhone6: If Automatic Downloads is enabled in Settings->iTunes & App Store, it will automatically download to the iPhone 6 when you buy it on the 5 and vice versa if you buy it on the 6, it will download to the 5.
Alternatively, you can simply go to the App Store App->Updates->Purchased and look for the App there and download it. Purchased Apps will not require payment again. i.e They'll be free to download to the iPhone 6 once purchased.
SMS Messages will sync over using Continuity as long as they are on the same Wifi network. Otherwise, restoring the iPhone 5 backup to the iPhone 6 will transfer all messages received up until the backup was made onto the iPhone 6.
Images, can be transferred either through Photo Stream
My Photo Stream FAQ - Apple Support
Or any Cloud service you want such as Dropbox, or One Drive.
mannyace wrote:
Also, something i forgot to ask initially: Should I update the iPhone 5 to iOS 8 first or does that not matter?
If you want the Continuity features as explained above you need to update the iPhone 5 to iOS 8. Otherwise its not all that important.

HT4236 i am syncing my 6228 photos, can I stop the procedure in mid operation. what are the consequences

I am presently syncing my ipad for the first time.
i am at step 8 of 8
syncing 6228 photos.
it is taking a long time.
can I stop the procedure at this stage with no consequence.
if any what are the consequences.

Do matters improve if you update to iPhoto 9.4.1?
iPhoto 9.4.1
From the release notes for the new version:
What's New in Version 9.4.1
Improves the reliability of syncing to iOS devices via iTunes
Fixes an issue that could cause iPhoto to quit unexpectedly when using the Export command
Addresses an issue that could cause iPhoto to quit unexpectedly when upgrading multiple books, cards, and calendars
Resolves an issue with downloading and viewing photos synced from Facebook albums

What are the guideline/requirement to upload an iphone apps to the Apps store ??, What are the guideline/requirement to upload an iphone apps to the Apps store ??

I am developing application for iphone. I need to find out what are the requirements/guidelines to publish this application to the App Store?.
Regards
kemayan.

Hi ...
You need enroll and pay $99 for the iOS developer program.
Start here > iOS Developer Program - Apple Developer
edited by: cs

Looking for photo frame with lots of features

Look for ipad photo frame app. One that will let me display pics from various sources, like facebook, my servers in the home, flickr.
Thanks

I tried many apps, but I narrowed it down to... Iphonso.com Air Frame.
It lets you view your facebook photos or friends', flickr via a bunch of categories, or enter tags. It includes your local photos.
It does not have the ability yet to to include your network shares, but I am hoping they include this in the next version.
So now looking at pics that are being streamed in from remote site, and at the same time listening to music that is also streamed in (via Home Sharing). Bliss.
Thanks for all your help
Message was edited by: doobias123

I joined iTunes Match on my MBP and added our MBA to the same Match account. What should the iTunes Media Folder Location be for iTunes on the MBA?

The iTunes libraries on both machines appear to be in sync, though I don't know if Home Sharing or iTunes Match is to thank for the consistency. But the iTunes Media Folder locations are different on the MBP and MBA, and I don't know if they should point to the same storage location (it's been on a drive connected to our Airport for years). I also don't know what options for Copying Files and Keeping iTunes Organized should be on the MBA. I certainly don't want the media files duplicated yet the devices sharing a cloud version.
I hoped the MBA would act like an iOS device using iTunes Match in that music would stream unless downloaded. Then downloaded music would have to be managed (deleted from the MBA's iTunes) for space reasons at some regular intervals-- just like we now do on the iPhones and iPad. The library entry for the song would remain... just the locally stored file would be deleted and the iCloud download would change back to the download symbol.
But if a purchase is made from the iTunes store on the MBA, the file is stored on the local MBA machine as well as the external drive because the MBP receives the song via Home Sharing and downloads the file.

Each iTunes client will expect a discrete iTunes library location. The iTunes Match service will allow the libraries to be automatically synchronised along with any IOS devices that are also registered for iTunes Match.
Following making a secure backup for any given library it is possible, once Songs have been 'matched' or 'uploaded' to remove the local copies and play the Songs from the Cloud. The behaviour on IOS devices is different, they will download each Song as it is played.
Note: Apple is very clear that the responsibility for maintaining music files remains with the user - so it remains essential to ensure that you have your own Songs secure backed up prior to relying on the Cloud. Should there be an issue with the Cloud resulting in loss of Songs you will need your own secure backup.

In the Full Featured LabVIEW example, what makes the entry point button reappear?

My question is this: What piece of LV code or invoke node for the TS engine makes the Entry Point button reappear when a sequence file is loaded?
Background:
I've inherited a modified version of the Full Featured LabVIEW UI, which has been moderately modified (Enough so that restarting isn't really an option, but it's still similar enough to use them as comparisons for behaviors). Also, this code was started in LV2012/TS2012, and I'm migrating to LV2013/TS2013, but this behavior was consistent in both versions.
Here's what I've tried:
I found that when the Connect Command executes (See attachment), the button, which is a TSUI.IButton control, is gets greyed out or hidden. In the unmodified example UI that's provided with TestStand, the button reappears when a sequence file is loaded. The problem is that when I load a sequence file in my code, and click on it ahead of running, the button does not reappear. In my code, I can run the sequence successfully by right clicking on the sequence file and selecting Run, so I don't believe the sequence has an error, nor the process model.
Thanks in advance,
Seth
Solved!
Go to Solution.
Attachments:
ConnectCommand.JPG ‏56 KB

Seth,
The "options" input of the ConnectCommand function controls this. On the Help page for this input, you can see that there are options for "ignore enable" and "ignore visible". Either of these could impact the functionality of the entry point button. You might try making the options for both buttons 0 and see if this resolves the issue. If not, please let us know.
Daniel E.
TestStand Product Support Engineer
National Instruments

Cisco 1252s with regular 802.3af PoE switches - what are the impacts?

Does anyone have any real-life experience with deploying the 1252s on regular 802.3af PoE switches? I have a few 1252s one some 3560 PoE ports and the show up with "low power" alarms.
I am wondering what the real world impact is with this scenario. The 1252s have both 2.4 Ghz and 5.0 Ghz radios in them and I have HT enabled on the controller.
I'm wondering what capabilities I am losing by running on 802.3af power besides the annoyance of the alarms.
Thanks in advance!

Sorry in advance for the book I have just written.
I have three 1252s on 75 feet of Cat5e cable running to a 3560 PoE switch. Sometimes, but not always, I see a low power alarm on the access point(s). This is in a small building that is built like a fortress so the RF environment is somewhat challenging. I am watching WCS closely and see all three 2.4 GHz radios powered all the way up to power level 1. I notice that two of the 5GHz radios are on power level 1, and one is on level 3. I thought that RRM would not power anything down until you had at least four access points as RF neighbors. I believe I read that in a Ciscopress book and it seems to be true everywhere in our network when I look at buildings with 3 or less WAPs.
The building in question does not have any other buildings close by with any 5GHz radios in operation - or at least I didn't see any when I did the survey.
I'm wondering if the power setting of the radios is also related to the length of the Cat5e cabling. Seems to me a shorter run would have less resistance than longer runs, allowing the radio to have more power.
My main concern is not this building in question, since we went for coverage and not client density in the design. We several other buildings on the radar, all libraries, which are going to be both RF challenging (bookshelves, furniture, cubicles, cubbies) and client-density challenged. These buildings have hundreds of WLAN clients in them at times - and I mean devices, not just people.
Someone else told me (reputable source) that channel bonding is not an option when on 802.3af power. Makes sense, actually. I would never even think of bonding in the 2.4 GHz range for obvious reasons, but up in the 5GHz range it is a definate possibility in these buildings. Seems to be that we might be shooting ourselves in the foot by not using 802.3at power in these buildings.
If channel bonding is disabled and the upper two MCS rates (using 800ns guard interval) of 117 and 130 are disabled, then I'm looking at maximum MCS rate of 104 Mbit/s compared to 270 Mbit/s with 802.3at with channels bonded in the 5GHz range.

My ipad is not charging with 10W usb power adaptor ? what are the causes?

My Ipad is not charging with the 10 W USB Power Adaptor Charger ? Please tell me .....What can be the issues with solutions to resolve them ? Even when the USB is connected to computer it is not charging , however , the transfer of data is taking place including Sync. Is there a problem with the charger or the ipad please isolate & inform. Thanks.

1. Clean docking port with clean paint brush
2. Try another cable
3. Try another charger

Firefox version 21 What is the WEB DEVELOPER TOOL ? What are the fuctions and what is it for?

I just want to know what all the tools do in the tools bar/ web developer
What does each of them control?

Current Firefox versions have a lot of built-in web developer tools including an Inspector and Style editor.
*https://developer.mozilla.org/en/Tools
The Web Developer toolbar has a help menu (F1) to facilitate entering commands.<br />
You can also use this toolbar to make a full page screenshot.
*https://developer.mozilla.org/en/Tools/GCLI
*https://developer.mozilla.org/en/Tools/Debugger
*https://developer.mozilla.org/en/Tools/Scratchpad
*https://developer.mozilla.org/en/Tools/Page_Inspector
*https://developer.mozilla.org/en/Tools/Page_Inspector/HTML_panel
*https://developer.mozilla.org/en/Tools/Page_Inspector/Style_panel
*https://developer.mozilla.org/en/Tools/Page_Inspector/3D_view
*https://developer.mozilla.org/en/Tools/Style_Editor

What is involved in fixing the kernel task problem and what are the consequences

Ah yes. The kernel task problem. My Macbook pro encounters it at least once every day. It peaks at around 600% CPU usage when I have MainStage or Logic open. A main stage patch that normally uses 40-45% of CPU is redlining at 100% cpu usage- resulting in awful clicks and pops. Did i mention this happened during a live show yesterday? Because it did. I can open the CPU monitor and look at whats going on. It's always the same deal. Kernel task runs it's course and then goes back to normal.
I've seen various posts on fixing the problem. I believe I understand how to fix it more or less (ish). I just want to make sure I can go about it in such a way that doesn't mess with anything else on my computer.
My computer: macbook pro 8.2 15' w/ crucial m500 ssd in main & optical bays. 8gb of ram. latest version of mavericks. Standard stuff.

ssd in main & optical bays
Your unsupported hardware configuration is likely contributing to the problem, if not entirely causing it.

HT201365 Hi i am looking for some help with a new iphone 5s whis has locked the screed due to the wrong pin number being inserted, It keeps asking me to go to iphone account, But when i do that the iphone account says it cant do anithying untill

0xE8000084 hi above error code is preventing me connecting my iphone 5s to itunes ?? any help or advice to re set Sim Locked password number of tries has expired and the phone is lpcked

I assume when you say "pin" you mean passcode. If it's disabled from entering the wrong passcode too many times you'll have to restore it to remove the passcode. If you have iOS 7 with Find My iPhone enabled, you'll either have to force it into recovery mode to restore it (as explained here: http://support.apple.com/kb/ht1808) or go to icloud.com and use Find My iPhone to erase it. After doing so, restore your most recent backup.

Eliminating the use of Activity Types -- what are the impacts and risks?

Our primary FI stakeholder wants to eliminate the use of Activity Types in our ERP 6.0 system. He would prefer the use of cost elements and cost centers. I know that the elimination of using Activity Types will impact our planning processes plus our ability to segregate costs within a cost center. What else am I missing?

Hi,
I can't understand the idea of "eliminating the use of activity types"...
What about direct activity allocation (based on time confirmation using activity types)? Is there no need to do so? Don't you use production orders?
best regards, Christian
Edited by: Christian Ortner on Mar 29, 2010 8:19 PM

4.6C to ERP6.0 Upgrade - what are the recommendations for Unicode and Java

Hi All,
Forgive such a basic question.
We are just beginning to look at our ERP6.0 upgrade and am unclear whether we should convert to unicode at the same time, and also what are the uses for the Java stack.
Unicode?
We are a single language Latin-1 site so don't need Unicode. However will it become mandatory eventually? Are we better, if we have the opportunity now, just to convert. Also I believe the Java stack is only Unicode. Does ASCII ABAP and Java Unicode complicate things?
Java?
Will we need it? We are proposing a technical upgrade from our 4.6c Javaless environment. Where does Java come in to play in ERP6.0? Doesn't it increase greatly the iSeries HW requirements? (I'm looking at a 2 way 550 at the moment)
Look forward to hearing your views.
Regards
Steve

Hi Stephen,
at the moment, in a latin-1 environment Unicode is for old customers not a requrirement. This might change in 5-10 years ...
Java: No problem at all with ASCII (in latin-1 environments)
=> there is no need for you, but you could go for it. We did several Unicode conversions already and these Latin-1 conversions are pretty easy and simple especially on iSeries, because of the special InPlace Unicode Conversion.
... but this can be done at any time ...
Regards
Volker Gueldenpfennig, consolut.gmbh
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

Looking for a canon with the same features as SD1100IS. What are the next 3 models after SD1100?

Similar Messages

Maybe you are looking for