Looking for a certain app. can you help...
I am going flying in a little cessna tomorrow. This will be my 2nd lesson. The instructor is happy for me to have my iphone on and it doesn't have to be in flight mode.
What this means is I can use the GPS to track the flight. I am looking for a particular app that will use the GPS and plot my track and allow me to place this over a google map or even google earth to show exactly where I have flown.
I have used a similar app for running (RunKeeper) and also another called iTrial but didn't like that one much.
Is there any you can recommend?
Thanks
Mark
If you go to the iTunes App store and look in the Navigation category there are many apps related specifically to flying.
For what you specify, GPS Recorder might be the one to check out. I've not used it, though, so YMMV.
Phil
Similar Messages
-
When I try to use FT on my MBP, connected to a 24" display, and close the shell, the display camera says it is not turned on. With the MBP open, FT works fine. I have looked and looked for a solution. Can someone help? Thanks
Hello BassoonPlayer,
Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using. FaceTime will not work if you do not have the proper time zone set up for the location that you are in. This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly. By the way, you described your problem very well, which makes it easier for us to help you. Hope this solves your problem -- if not, post back and I can suggest other remedies.
Wuz -
I bought photoshop elements 8 a few years ago. I had to reinstall my computer, and I can't find this PSE 8 on Adobe. Only the 12 is available, but I've paid a serial for the 8. Can you help me please ?
Download Photoshop Elements products | 9, 8, 7
Mylenium -
Hello everyone! I'm having a trouble... I need to download Adobe Illustrator for windows 8, but i'm not able for doing that. Can you help me Please?
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
hello
i have a mac os x 10.7.2 . but i don't find xcode for 10.7.2 . can you help me.IIRC = if I remember correctly.
http://www.acronymfinder.com/IIRC.html -
My App Store app for Ipod is glitching can you help me?
My app store app is glitching like crazy the blue free/price button that appears when you want to install something will appear just like normal when I first click on the app I slected in the store but as soon as I try to install it the button glitches and I can now only see half of the button and it has changed to the green install button unfortunatly when I try to use the install button anyway it changes to a glitched half version of the free button but will not do anything else...Can anyone help me?
Go to https://discussions.apple.com/message/18742761#18742761 same problems being reported there also.
It's the App store, not us. -
I am looking for the photoshop 5.5 plugin to allow me to open my .nef camera files... can anyone help?
Other than upgrading PS, you might want to look into Nikon Capture. I have an older version, so do not know if it's still offered, and if it will handle your version of NEF's, as they change, hence the ARC upgrades for newer Nikon (and others) cameras.
Good luck,
Hunt -
Needing install disk/download for Design Standard (CS3) Can you help me?
I am looking for someone who has their Design Standard intall disk. I have lost mine and Adobe customer service has told me to look out here because they only keep current programs on hand. I cannot afford to buy the latest programs. I have my serial number for the programs and all information I need to register them I just need to find the install program so I can reinstall it on my computer. Will anyone help me??? Thank you!
This is not an appropriate topic for the Acrobat forum. It will now be closed. Anyone wishing to contact the OP can use the private message facility.
-
Merge modules for report viewer only - can you help today?
Hi all,
We are using Crystal 2008, VS 2008, and have an C# application that is using the Crystal reportviewer control to render a report generated server side.
We need the Crystal 2008 reportviewer control, not the 10.5 version that is currently referenced in the studio. For development purposes, we can install the Crystal 2008 msm.
But here's my question.......
For our client side install, is there a merge module/msi that will give me just the controls I need instead of using the (larger) merge module/msi from the site?
We need to get our build done within the next day. Any help in answering this question would be greatly appreciated. If you can just let us know whether there is any other way than the full msm, that would be very helpful.
Thanks so much......Hi,
We need the Crystal 2008 reportviewer control, not the 10.5 version that is currently referenced in the studio. For development purposes, we can install the Crystal 2008 msm.
For development purpose the CR 2008 must get integrated with VS 2008, also all the correct references should be referenced.
- How to integrate
First Install IIS
then VS 2008
then CR 2008
How to check that CR get integrated with VS or not -
Open VS environment go to help about - there you will see the version of CR integrated.
Note:- VS 2008 is compatible with CR 2008 SP0/SP1
For our client side install, is there a merge module/msi that will give me just the controls I need instead of using the (larger) merge module/msi from the site?.
You must have installed the runtimes to run CR on the machine where CR complete product is not installed, Hence the system must have merge modules or server install.
Hope this helps!!
Regards,
Amit
Edited by: Amit Singh on May 6, 2009 5:48 PM -
i bought an itunes card - loaded on my ipod touch - it shows the $ is there but will not let me buy anything - says I need a verification - I don't know what to verify.... Can you please help?
See Kappy's previous discussion.
HT5312 How to recover security...: Apple Support Communities -
Hello,
I have an HP Pavilion a1210n running Windows Vista 32bit. I'm missing the audio drivers and can't seem to find them. Can you point me to a link for these drivers?
Thanks, It's much appricieated!I found this link but it doesn't talk about audio drivers in the multimedia package. Am I missing something? Does Vista need to have all OS updates installed for this to work?
Thanks again! -
Need mating connector for NB1 ribbon cable, can you help?
I need a right angle board mount mating connector for NB1 ribbon cable I am using with PCI-6503 board.
Hello bench �
On the PCI-6503 product page, there is a link to purchase accessories for your product. If you still cannot find the connector, a National Instruments sales associate can be reached at (888) 280-7645.
Have a great day!
Becky B.
Applications Engineer
National Instruments
Becky Linton
National Instruments
Field Engineer
Office: 734-464-2463
Cell: 248-709-2822
Email: [email protected] -
I'm trying to find an app that is for all those little "tags" that you get from stores....cvs, kroger, best buy, the little tags that they scan when you check out. I heard that there was an app out there that stored all those tags in one place, that way I don't have to carry 50 around in my purse.
Thanks for any help you can give me -
I know there are discussions out there regarding this but my system is 10.5.8, I know how to turn the computer on and run some programs but understanding partitions, etc...forget it. I have programs on my computer I don't want to lose, images in photoshop that, if lost, I would kill myself so please help me in basic English terms...what the heck do I need to do to update to OS X so I can feel inferior again when I update to OS 7?
Somehow, your internal HD got selected as the destination for TM backups, perhaps long ago.
That left a Backups.backupdb folder at the top level of your internal HD.
All you need to do is open your internal HD (probably named Macintosh HD) via the Finder, locate and delete that folder. -
I lost my answer for apple identification ples can you help me.
Hi ples apple help me ples.
No one here can help you remember the answers to the questions. Contact Apple for assistance.
Maybe you are looking for
-
B1 não permite alterar data de vencimento em um boleto gerado.
Olá, O B1 não permite alterar data de vencimento de um boleto gerado. Situação: Um cliente solicita adiamento de uma parcela do boleto gerado, usuário não consegue modificar a data de vencimento, então o procedimento atual no SAP B1 é cancelar aquela
-
CRM 7. How to make mandatory the BP Roles on CRM Web User Interface.
Dear CRM Gurus, The requirement in our project is to have as mandatory at least one BP Role (except the default role of BP). Is there any way to implement or configure the CRM system to display an error message when a user tries to save a BP from W
-
Get an E-Mail-Notification if there is a alert for a SAP-System in DSWP
Hello, how can i get an E-Mail-Notification when there is a alert in a SAP-System? I know that alerts are shown in the transaction dswp under System Monitoring but exists a alternative to get these alerts via E-Mail? In the transaction rz21 autoreact
-
New macbook-4 weeks old, repeated typing delays
I recently purchased my first macbook roughly 4 weeks ago and the experience has not been pleasurable. I am a law student and depend on my computer for taking notes, and unfortunately my macbook has ceased to allow me to type several times now. I wil
-
Navigation toolbar under tabs - after installing status bar add on
I can see the navigation bar as well as a shadow of the tabs, but cannot access the navigation icons. this began after loading the status bar add on to use older add ons