Looking for a Content Server 4 Trainer asap.

I have a need for a Content Server trainer in Colorado asap and would love some help.

I can guide you ? But me in Islamabad, Pakistan.
Thanks, Shafqat,
[email protected]

Similar Messages

  • SAP Parameter Recommended  note for SAP Content Server 6.40

    Hi..
    we are planning to installation of SAP Content Server 6.40 with SAP MAXDB 7.6 on Solaris, Kindly provide what are the recommendation need to perform before installation  of Production system.
    Like IO Buffer Cache[MB] ,  Number of Sessions  or any SAP Parameter Recommended  note for SAP Content Server 6.40 with SAP MAXDB 7.6.
    Regards,
    Panu

    Hello,
    Did you already check the preparations and parameters in the SAP CS 6.40 installation guide ?
    You can find topics in the Installation Guide like :
      - Planning and Sizing of the Database Instance
      - Preparations
    For more in depth tuning also have a look at the following document :
    Operational Guide - SAP Content Server
    This document contains the complete list of Content Server parameters.
    Success.
    Wim

  • Looking for MS SQL Server(2012 or older versions) all commands

    HI,
    Looking for MS SQL Server(2012 or older versions) all commands, i.e., all available sql server commands.
    Is there any reference manual or MS KL to get all commands in SQL Server ?
    Thanks in advance

    Thanks for link
    Sean Gallardy and Jingyang Li.
    This is is not usefull for my requirement.
    What i am looking is..SQL Server commands  like examples... DDL/DML comands...create/alter
    Examples: Insert/update/delete,truncate.......etc
    Create database,create procedure.......etc
    Alter database,shutdown,drop,create....etc
    Looking for list of all commands in one place/doc in SQL Server.
    Thanks

  • EWA reports for SAP Content Server

    Hi
    I have installed the SAP Content Server 6.40 on Solaris and MaxDB but my client want to configure EWA for  SAP Content Server.
    As per Content Server for EWA reports need to be configuring only Database and OS.
    Kindly suggest me what are the steps need to be performed to setup the EWA for Content Server.
    Regards,
    Panu

    Hi There
    In order to have EWA report for any system you need to meet some prerequisit , for detail please refer to
    this link below..
    http://service.sap.com/EWA   >> Media Library
    Best Regards
    Jai Wardhan

  • How do I stop mavericks from looking for an old server and nagging me that it can't find it?

    MacBook Air running OS X 10.9.4
    Had it set up to connect to my main iMac for shared files.  Wife complained that when my iMac wasn't on the MacBook constantly nagged her with a message saying it couldn't connect to the server (my iMac).
    Removed sharing on my iMac.  Removed recent server list from the MacBook Air.  Removed my iMac from the finder side bar in the MacBook.  Now the MacBook Air constantly naggs us that it can't find the server (name of my iMac).  I just want the @#$@# thing to shut up, quit looking for the iMac and be quiet.
    Need help as I can't figure this one out.
    PLEASE!!  

    There are many possible causes for this issue, and it may be hard to resolve. Please take each of the following steps that you haven't already tried. Back up all data before making any changes.
    If you get the alert in the login screen before you log in, stop here and ask for instructions.
    Step 1
    If you get the alert as soon as you log in, it's probably caused by one of your login items or by software that otherwise loads at startup or login. Ask if you need help identifying it. A known offender is "AdobeResourceSynchronizer," which is a component of some Adobe products. See also this discussion.
    Step 2
    If there's an icon representing the server in the sidebar of a Finder window, hold down the command key and drag it out.
    Step 3
    In the Finder, press the key combination command-K or select
              Go ▹ Go to Server...
    from the menu bar. In the upper right corner of the window that opens is a Recent Servers popup menu represented by a clock icon. From that menu, select
              Clear Recent Servers…
    and confirm. Test.
    Step 4
    Open the Printers & Scanners pane in System Preferences and delete any network devices you no longer use.
    Step 5
    Triple-click anywhere in the line below on this page to select it, then copy the text to the Clipboard by pressing  command-C:
    ~/Library/PDF Services
    In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. A folder may open. If it does, move the contents to the Desktop, or to a new folder on the Desktop. Log out and log back in. Test. If there's no change, put the items you moved back where they were and continue.
    Step 6
    Open the folder
    ~/Library/Preferences
    as in Step 5 and move the file named "loginwindow.plist" items in that folder to the Trash, if it exists (it may not.)
    Log out and back in again, and test.
    Step 7
    Other possible causes are references in the iPhoto, iTunes, or iMovie library pointing to the server, and bookmarks in the Preview application.
    Try rebuilding the iPhoto library.
    Step 8
    Disconnect all wired peripherals except those needed to start up. Start up in safe mode. Test. After testing, restart as usual (not in safe mode) and verify that you still have the problem.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Step 9
    Triple-click the line below to select it:
    /System/Library/CoreServices/Directory Utility.app
    Rght-click or control-click the highlighted text and select
              Services ▹ Open
    from the contextual menu.* The application Directory Utility will open.
    In the Directory Utility window, select the Directory Editor tool in the toolbar. Select Mounts from the Viewing menu in the toolbar, and/Local/Default from the node menu, if not already selected. On the right is a list of names and values. By default, the list is empty. If it's not empty, post a screenshot of the window and stop here.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.
    Step 10
    Open the following file as you did in the last step:
    /etc/auto_master
    It will open in a TextEdit window. The contents should be exactly this:
    # Automounter master map
    +auto_master          # Use directory service
    /net               -hosts          -nobrowse,hidefromfinder,nosuid
    /home               auto_home     -nobrowse,hidefromfinder
    /Network/Servers     -fstab
    /-               -static
    If there are any other lines in the window, post them. Otherwise, close the window.

  • Are there any Adobe's partners provide licensing and support for Adobe Content Server in Germany?

    Hello,
    My name is Quang from Vietnam . My company is interested about Content Server and I am looking for Adobe's partners that provide licensing Content Server (like Datalogics) in Germany. I have some friends there and I hope they can help. If you know any companies, please tell me.
    Thank you

    I would say that it was very funny to stay on Amsterdam, but i really can't remember so much of these days, jeje

  • Looking for SAP ME (SCM 750) Training Location/Participants

    Hello Community,
    Is there any location that conduct SCM750 traning? I am interested in enrolling in this training course. Since am all alone requesting this SCM750 training, SAP UK or SAP Belgium is not ready plan the training.
    But. there is a possibility to plan the training if i can manage atleast 2 candidates to enroll in this training.
    Am I in the right place to look for such candidates? If Not, am in the right place to hear some possible training locations inside Europe or India?
    Kindly reply.
    Best Regards,
    Javid Ahamed.

    Hi Javid
    The US are running this class virtually starting on 27th April so as long as you don't mind some late evenings (I assume you are based in Europe?) you could sign up to this class.  Details can be found via the link.
    Alternatively you could consider SAP Learning Hub.  For one subscription fee, you have access to all SAP Education content, you can find details about that here
    I hope that helps.
    Rob

  • Looking for a client/server that supports multiple protocol and delivery

    Hi all, I don't know if this the right place to ask my question,here it goes.
    I am looking to develop a client-server that supports multiple protocols such as HTTP, HTTPS etc. I am looking for a framework( i don't know if that is correct or I need some kind of web-service (soap etc)) that would manage connection, security etc. I would like to like to devote most of my time in developing business objects with multiple delivery mechanism such as sending serilized java objects, xml message or soap message, or in some case JMS message as well. So I need a client server that can come in via TCP/IP or HTTP or anyother industry standard protocol and I should be able to service him with pub/sub model and also request/response model as well.
    I don't know if I had explained what I need, I would like to know what technologies I should be evaluating and which direction I should be heading... Also the server I'm developing should be free of Java constraints if needed...
    Also this service is not webbased service as now but if need arises I should have a flexibilty to make them web enabled in future. Also I would like to work with open source webservers or appservers if I need

    Inxsible wrote:I installed i3 - along with the i3status - which I still have to figure out. I am liking what I see as of now. It reminds me of wmii -- when I used it way back when. However I do not like the title bar. I would much rather prefer a 1 px border around the focused window.
    "i3 was created because wmii, our favorite window manager at the time, didn't provide some features we wanted (multi-monitor done right, for example), had some bugs, didn't progress since quite some time and wasn't easy to hack at all (source code comments/documentation completely lacking). Still, we think the wmii developers and contributors did a great job. Thank you for inspiring us to create i3. "
    To change the border of the current client, you can use bn to use the normal border (including window title), bp to use a 1-pixel border (no window title) and bb to make the client borderless. There is also bt  which will toggle the different border styles.
    Examples:
    bindsym Mod1+t bn
    bindsym Mod1+y bp
    bindsym Mod1+u bb
    or put in your config file
    new_window bb
    from: http://i3.zekjur.net/docs/userguide.html (you probably already found that by now )

  • Content repository creation for SAP Content Server

    Hi,
              I have installed Conteont Server 6.5 and Cache Server with Max DB 7.9.8.12 instance on windows server 2008  platform.Now connection to the content server with SAP Netweaver 7.4 on different host is established .When i am trying to create repository in Content Server Administration in application  SAP Netweaver 7.4 server an error is prompted as:
    Can any one please suggest me a solution
    regards
    uday reddy

    Hi Chandu,
    Thanks for the reply,
    I have tried the both commands mentioned in sap note 301352.It is showing results as
    Error : The specified driver does not exist.
    Please suggest me with a solution.
    regards
    uday reddy

  • Looking for an Audio Server Solution

    Alright, so I've got a headless server running in my bedroom that I use for storage.  I already stream media to my ps3 using ps3mediaserver, but what I'd really like to be able to do is play music remotely from my desktop and laptop.  I've spent some time looking around for solutions, but can't really come up with anything.  As such, I'm looking for some help!
    What I'd like to do:
    * Keep all music stored on the server
    * Access the music remotely in a nice gui interface (Rhythmbox would be ideal, but something similar would work too)
    * Play the music out of my desktop or laptop's speakers, not out of the server
    I played around with mpd some, but ultimately gave up.  I could get it to stream with http, but I was having to stream it to vlc and control it with another program... Not the best solution.
    Any ideas?  All help is greatly appreciated

    tomk wrote:
    gabe.benson wrote:I'm attempting NFS, but I have no rpcbind.service file on my system.  rpcbind is installed, but when I attempt to start the services with systemctl it tells me that rpcbind.service doesn't exist.
    Are you sure your system is up to date? systemd support was added to the rpcbind package in April this year,
    Oddly enough it's working now.  No clue what changed.
    As for MPD, I've pretty much given up.  Thanks for the suggestions and help!

  • Post-actions for Kpro-Content Server after Sap DB Copy

    We have a Sap system based on Web As 6x connected to a Sap Content Server to store originals.
    We copied back this Sap system to the quality system.
    Now the Sap quality environment refers to the same Content Repository of the production, and we want to modify this.
    From this environment it should not be possible to access or to modify the originals of the production.
    More in general, wich post-actions can be done on the Sap target system after a DB copy where the source system is connected to a Content Server ?
    For example, which tables can be cleaned up ?
    regards

    Hi,
    Pls see the below link if this can help you.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/8d/3e704c462a11d189000000e8323d3a/content.htm
    Anil

  • What is the video file size I can use for Telepresence Content Server to calculate storage required?

    Hi,
    I would like to calcualte storage requied for Video files on the Telepresence Content Server, MPEG Format.  What is the per minute storage required for a video file with and without compression? What kind of Video compression rates are supported on TelePresence Content Server and MXE 3500. 
    Thanks
    Sue

    Hi,
    Following thread might be helpful to you...
    http://scn.sap.com/thread/1637092
    http://scn.sap.com/thread/1284704
    BR,
    Anirban

  • HTTP 401 error in CSADMIN for SAP content server on Linux OS and MaxDB

    Hi,
    We have installed content server on Linux OS.and DB as MaxDB.
    I created the repository using OAC0. The with same tab I went to CSADMIN.
    When I try to create repository with executing it , it ask for user name and password.
    I mentioned the SAPCS admin user name and password, but i got HTTP 401 error. Unauthorized user.
    Even i tried with prefixing domain name and with root user ID and password.
    But got the same error. Please help
    Regards,
    Hemant

    Hi
    We are also facing the same problem. but as you mentioned in solution.
    user: <domain>/<admin-user>
    pw: pw
    I am getting the same problem of Error 401. Kindly describe in detail with example.
    Thanks
    Regards,
    R Karthikeyan

  • Can someone please share configFile.xml for crawling Content Server Source

    Hi All
    I am trying to create a Content Server Source in SES. I am unable to generate the configFile.xml as mentioned in doc, from UCM.
    Can someone please share the config file.
    Thanks & Regards,
    Amit

    Hi ,
    Thanks lot for replying.
    I am using the same versions. There is one xml file getting generated but its name is not configFile.xml
    In my test it generated one with df2009-04-21-20-16-22-833434567.xml name.
    Please tell me is this the correct file?.
    some contents of it are...
    Line: -----
    <?xml version="1.0" encoding="UTF-8"?>
    <rss xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    version="2.0"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xsi:schemaLocation="http://xmlns.oracle.com/orarss C:\project_drive\SES Application Search\SES Format Schma\orarss.xsd">
    <channel>
    <title>Content</title>
    <link>df2009-04-21-20-16-22-833434567.xml</link>
    <description>The channel contains a feed for content</description>
    <lastBuildDate>2009-04-21T14:46:22.000Z</lastBuildDate>
    <channelDesc xmlns="http://xmlns.oracle.com/orarss" >
    <feedType>full</feedType>
    <sourceName>content_feed</sourceName>
    </channelDesc>
    <item>
    Line: -----
    Thanks a lot... :)

  • Liscence for SAP Content Server

    Hello,
    Our client is using SAP ECC 6.0 system. They want to start using DMS. Content server is not installed. Do we need seperate liscence for Content server?
    Regards,
    Milind Dumbre

    Dear Milind,
    maybe you can find useful information on the SAP Service Marketplace under http://service.sap.com/contentserver.
    Best regards,
    Christoph

Maybe you are looking for