Looking for a formal training class for the SDK.
Is there a formal SDK class this forum would recommend? Focus is on Cloud for Customer.
Hi Michael,
yes, there is:
WDC4C3 - Cloud for Customer-Development Training | SAP Training and Certification Shop
Cheers,
Jens
Similar Messages
-
Training classes for webdynpro?
Hi,
does anyone know, if or when SAP education will offer training classes for WebDynpro?
I was looking for it on the Market Place, but could not find anything.
Thanks,
PatriciaHi Patricia,
Unfortunately, the formalized training for Web Dynpro is still in the beta stages. I was one of the instructors at the first session of RDWAS2 (which focuses on development within the Web Application Server 6.40 including heavy Web Dynpro content) that had external customers in attendance just last week. The class was still in "Beta" mode and not open to the general public. There is a bit of tweaking still to do on the content, but I expect you will see a general scheduling of the course in the near future. (Formalized training can lag a general customer release by up to 6 months, but I think this one will be out more quickly.)
Hope this helps,
--Greg -
Training classes for Portal 6.0 vs Portal 6.1
I'm looking at taking Sun's web based classes on the Portal Server. We are using 6.1 but the classes only cover 6.0
Is there much difference between 6.0 and 6.1 that would make the training obsolete? I'm not familiar with 6.0 so I can't tell.I went to that site and looked at the info... this is too good to be true. How can this be?
Thanks... you saved me hundreds of not thousands of dollars. -
Training classes for Administrator and Performance Tunning
Hi All,
I would like to learn more about ORACLE database so do you know any where offering the classes for Administrator and Performance Tunning in California Bay Area.
THanks,
JPOracle. :-)
http://education.oracle.com
Alison -
Best Practice for WSDL Generate Proxy Class for Web Service with Two Versions
Dear All
Thank you in advance for you help.
I would like to generate proxy classes for same function but with two versions.
Old version web service (v23.2) is used for stable modules in a project which is not going to modify.
However, enhancement is added in new version web service (v24) and is going to use in any future modules.
For example,
wsdl.exe -o="TestProxy.cs" -l:CS -n:Test -sharetypes https://community.workday.com/custom/developer/API/Notification/v23.2/Notification.wsdl https://community.workday.com/custom/developer/API/Notification/v24.0/Notification.wsdl
It generates similar classes with an '1' added at the end of the class name.
ublic partial class Event_TargetObjectType {
private Event_TargetObjectIDType[] idField;
public partial class Event_TargetObjectType1 {
private Event_TargetObjectIDType1[] idField; ...}
Since the function inside some class is the same, is it possible for WSDL.exe to generate proxy classes automatically that if the class is the same, then generate one class only (sameFunction()) but if it detects the class is different, then add '1'
to the end of class name (differentFunction() and differentFunction1())
i.e.
public class sameFunction()
public class differentFunction()
private int a;}
public class differentFunction1()
{ private int b;
Best Regards
mintssoulHi mintssoul,
As per this case, I have shared corresponding details below :
1.As far as I know, WCF doesn’t support method overloading directly
2.Because WSDL doesn’t support method overloading (not OOPs).
3.WCF generates WSDL which specifies the location of the service and the operation or methods the service exposes.
4.WCF use Document/Literal WSDL Style : Microsoft proposed this standard where the soap body element will contain the web method name.
5.By default all the WCF services conform to the document literal standard where the soap body should include the method name.
6.but you can differ the method in the same manually by using Name attribute like below
For example:
[OperationContract(Name="Integers")]
int Display(int a,int b)
[OperationContract(Name="Doubles")]
double Display(double a,double b)
7. Or I suggest you that can use svcutil to map multiple namespaces for generating wcf service proxies .
for more information about this, refer here :
http://stackoverflow.com/questions/1103686/use-svcutil-to-map-multiple-namespaces-for-generating-wcf-service-proxies -
Why interface for nodes? but class for UI Elements
Hi Experts,
why in wda ,sap has given interface for nodes and elements ,and class for ui Elements.
Eg. for using nodes they provide if_wd_context _node
but for input field they provide cl_input_field
Any Body Having an idea pls revert asap
Regards
Sarathhi sarath........
when the node is being shared between 2 views.............. both the views need to access the same node for updating values. so you need an interface between these two.
where as for elements you need not have any sharing..... and your element id is unique..... so no problem for that.
where as in nodes... there might be a node of same name in your view as well as your component controller. so you need an interface.
---rergards,
alex b justin -
Netweaver training class for MII Admin and Developer.
I took the SAPEP SAP NetWeaver Portal - Fundamentals but it did not cover how to configure/install Netweaver for MII.
I wonder SAPNW SAP NetWeaver Application Server class will cover for the followings:
1. Knowledge to customize the MII web page
2. Knowledge to understand the MII web server installation for additional patches, upgrader from 12.2 to 14 and additional java library (SAP UI 5 for 12.2.5.70 what I have)
3. Knowledge to configure file\directory structures under usr\sap\MID\J04\j2ee\cluster\apps\sap.com\
xapps~xmii~ear and etc.
4. Also looking for SAP MII Advanced Training coures - I took already SCM380 MII Basics
5. Would be able to use SAPUI5 into MII
Thank you in advance.Hi
Actually the Discoverer Administrator tool has changed so little over the past 5 years or so that you could take a Discoverer 4 EUL class and apply everything that you have learned to 10g. Personally I'd go for the one entitled OracleBI Discoverer Administrator. That's the latest version. You can tell because the letters BI are now part of the product.
I've never used the CD ROM so can't comment - sorry.
Best wishes
Michael -
Looking for recommendations on training books for PS CS3
I'm not complete newbie to Photoshop, but I know there is so much more I could get out of it.... so I'm looking for a good tutorial book. One that isn't going to cost me an arm & a leg.
Thanks!Michael,
No book will have solutions to all problems. Even the Web will come up short sometimes. That's what this forum is about.
I'd start with the manual, then spend some time with the Help files (F1). Yeah, the manual doesn't read like Faulkner, but it's not bad and has the solution to many, many problems. It does rely too heavily, nowadays, on "(see Help files)," but ink and paper have gotten more expensive.
Next, as someone else suggested, "Classroom in a Book," and work through it all, even the stuff you think you'll never need. You will pick up other knowledge, as you do those exercises.
At that point, decide what you want to do with Photoshop. That will narrow your book/training down to specific areas, like "Photoshop for Photographers," "Photoshop for Video," etc.
If you hit a problem, that you cannot solve with the manual, F1, "CiaB," Google and a search of this forum, please post your specific question.
Hunt -
Looking for Iphone3 training class?
I am looking for a training class for my Iphone3.
Have you downloaded the User Guide(s):
http://manuals.info.apple.com/en_US/iPhone_3GS_Important_Product_Information_Gui de.pdf
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
http://manuals.info.apple.com/en_US/iPhone_3GS_Finger_Tips.pdf
Additionally, the TidBITS staff have released several e-books for purchase under their Take Control line:
http://www.takecontrolbooks.com/catalog# -
Training documents for reports
hi,
i am looking for end user training documents for my reports. i need serious help from your side plz, if you have any related documents please forward to my mail address
mail id:[email protected]Hi,
Check the links in below.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/828d9590-0201-0010-95a7-ea8cf8814b94
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ec20a990-0201-0010-f291-d1d039975e41
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a249a990-0201-0010-e18e-b2f5ed135497
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bc4fa990-0201-0010-588e-ca4e63050d6d
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b931a890-0201-0010-268d-a7bedf8aa720
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f0aca990-0201-0010-0380-f3aac4127a57
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3541a990-0201-0010-f1ae-b24b72690df7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2642ab90-0201-0010-9193-d59de66cbab4
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9c059b57-0701-0010-3283-e5e8669f827e?prtmode=navigate
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/com.sap.km.cm.docs/library/biw/web%20reporting%20part%202%20-%20bex%20broadcaster/resources/eventplayer.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/fbda919b-0c01-0010-25a6-e7316614892a?prtmode=navigate
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/e07c77ad-0701-0010-519e-90d09dafe44b?prtmode=navigate
Regards, -
Calculation of depreciation and interest for a particular asset class
Hi,
I have a problem with the calculation of depreciation and interest for a particular asset class. The assets are financial leases. The depreciation key defined is LEAS. The following are the attributes of this key:
Dep/int phase base met dec-bal prd cont mult lvl chn ov
Ord.depreciation 1 0011 001 006 001 5
Ord.depreciation 2 0002 001 003 003
Interest 1 0028 001 003 010
An example of an asset is:
Aquisition value: 1041552.71 (as migrated on 01.04.2007)
Ordinary dep already posted: 56243.88
Net book value: 985308.83
Scrap Value:729086.90
Useful life: 50 years
Expired useful life: 9 years 1 month
Remaining useful life: 40 years 11 months.
Depreciation start date: 28.03.1998
Interest calculation start date:30.03.1997
Depreciation calculated by the system:6261.83
Interest calculated in the year:15682.68
I'm not able to undersatnd on what basis the system calculated the interest. I will be thankful if anyone can help me resolve this. An early reply will be greatly appreciated as I'm facing major problems due to this issue.Hi Mahesh,
As per my analysis of the case the interest rates are as under
Acq. Year Int.Percent
9999 4 01 10.%
9999 7 01 5.%
9999 25 01 2.5%
9999 999 12 01 2.5%
As per this the Acquisition value less the Scrap Value Rs.312,465.00 @ 2.5% p.a will be Rs. 7811.64.
Based on the above you analyse for which period interest is calculated.
Hope it will help.
Regards,
Vijay -
ALV with classes for selected fields
Hi ALL,
Please can anybody will give the example code for
<b>ALV with classes for selected fields</b> from database table .Hi,
*& Report YR_TANS_ALVTEST *
REPORT yr_tans_alvtest .
INCLUDE ya_yr_tans_alvtest_top.
TABLES yttans_test.
DATA itab LIKE yttans_test OCCURS 0.
DATA gr_alvgrid TYPE REF TO cl_gui_alv_grid .
DATA gc_custom_control_name TYPE scrfname.
gc_custom_control_name = 'CC_ALV'.
DATA gr_ccontainer TYPE REF TO cl_gui_custom_container .
DATA gt_fieldcat TYPE lvc_t_fcat .
DATA gs_layout TYPE lvc_s_layo .
data wa_itab like line of itab.
TYPES : BEGIN OF ty_help,
roll_no LIKE yttans_test-roll_no,
name LIKE yttans_test-name,
END OF ty_help.
DATA: git_returntab TYPE TABLE OF ddshretval INITIAL SIZE 0.
CLASS lcl_event_handler DEFINITION
CLASS lcl_event_handler DEFINITION .
PUBLIC SECTION .
METHODS:
handle_double_click FOR EVENT double_click OF cl_gui_alv_grid IMPORTING
e_row e_column es_row_no.
PRIVATE SECTION.
ENDCLASS. "lcl_event_handler DEFINITION
DATA gr_event_handler TYPE REF TO lcl_event_handler .
*& Form handle_double_click
text
-->I_ROW text
-->I_COLUMN text
-->IS_ROW_NO text
FORM handle_double_click USING i_row TYPE lvc_s_row i_column TYPE
lvc_s_col is_row_no TYPE lvc_s_roid.
leave to list-processing.
read table itab index is_row_no-row_id into wa_itab.
write:/ 'Roll no: ', wa_itab-roll_no, /'Name: ', wa_itab-name,
/'Marks: ', wa_itab-marks.
LEAVE SCREEN.
ENDFORM . "handle_double_click
CLASS lcl_event_handler IMPLEMENTATION
CLASS lcl_event_handler IMPLEMENTATION .
*--Handle Double Click
METHOD handle_double_click .
PERFORM handle_double_click USING e_row e_column es_row_no .
ENDMETHOD . "lcl_event_handler
ENDCLASS . "lcl_event_handler IMPLEMENTATION
SELECT-OPTIONS roll FOR yttans_test-roll_no .
AT SELECTION-SCREEN ON VALUE-REQUEST FOR roll-low.
DATA: lit_help TYPE TABLE OF ty_help.
DATA: wa_returntab LIKE LINE OF git_returntab.
SELECT roll_no name INTO TABLE lit_help FROM yttans_test.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'ROLL_NO'
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'roll-low'
value_org = 'S'
TABLES
value_tab = lit_help
return_tab = git_returntab
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE git_returntab INTO wa_returntab INDEX 1.
roll-low = wa_returntab-fieldval.
AT SELECTION-SCREEN.
SELECT * FROM yttans_test INTO TABLE itab WHERE roll_no IN roll.
START-OF-SELECTION.
CREATE OBJECT gr_event_handler .
CALL SCREEN '9000'.
*& Module STATUS_9000 OUTPUT
text
MODULE status_9000 OUTPUT.
SET PF-STATUS 'STATUS_9000'.
SET TITLEBAR 'TITLE_9000'.
ENDMODULE. " STATUS_9000 OUTPUT
*& Module USER_COMMAND_9000 INPUT
text
MODULE user_command_9000 INPUT.
DATA: ok_code TYPE sy-ucomm,
save_ok TYPE sy-ucomm.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
WHEN 'BACK' OR '%EX' OR 'RW'.
CALL METHOD gr_ccontainer->free.
CALL METHOD cl_gui_cfw=>flush.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_9000 INPUT
*& Module alv_display_9000 OUTPUT
text
MODULE alv_display_9000 OUTPUT.
PERFORM display_alv .
ENDMODULE. " alv_display_9000 OUTPUT
*& Form display_alv
text
FORM display_alv .
IF gr_alvgrid IS INITIAL .
CREATE OBJECT gr_ccontainer
EXPORTING
PARENT =
container_name = gc_custom_control_name
STYLE =
LIFETIME = lifetime_default
REPID =
DYNNR =
NO_AUTODEF_PROGID_DYNNR =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT gr_alvgrid
EXPORTING
I_SHELLSTYLE = 0
I_LIFETIME =
i_parent = gr_ccontainer
I_APPL_EVENTS = space
I_PARENTDBG =
I_APPLOGPARENT =
I_GRAPHICSPARENT =
I_NAME =
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SET HANDLER gr_event_handler->handle_double_click FOR gr_alvgrid .
PERFORM prepare_field_catalog CHANGING gt_fieldcat .
PERFORM prepare_layout CHANGING gs_layout .
CALL METHOD gr_alvgrid->set_table_for_first_display
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT =
I_SAVE =
I_DEFAULT = 'X'
is_layout = gs_layout
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
CHANGING
it_outtab = itab[]
it_fieldcatalog = gt_fieldcat
IT_SORT =
IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4
IF sy-subrc <> 0.
LEAVE TO LIST-PROCESSING.
WRITE 'error'.
ENDIF.
ELSE.
CALL METHOD gr_alvgrid->refresh_table_display
EXPORTING
IS_STABLE =
I_SOFT_REFRESH =
EXCEPTIONS
finished = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDFORM. "display_alv
*& Form prepare_field_catalog
text
<--P_GT_FIELDCAT text
FORM prepare_field_catalog CHANGING p_gt_fieldcat TYPE lvc_t_fcat .
DATA ls_fcat TYPE lvc_s_fcat .
ls_fcat-fieldname = 'ROLL_NO'.
ls_fcat-coltext = 'ROLL No.'.
APPEND ls_fcat TO p_gt_fieldcat.
ls_fcat-fieldname = 'NAME'.
ls_fcat-coltext = 'NAME'.
APPEND ls_fcat TO p_gt_fieldcat.
ls_fcat-fieldname = 'MARKS'.
ls_fcat-coltext = 'MARKS'.
APPEND ls_fcat TO p_gt_fieldcat.
ENDFORM. " prepare_field_catalog
*& Form prepare_layout
text
<--P_GS_LAYOUT text
FORM prepare_layout CHANGING ps_layout TYPE lvc_s_layo.
ps_layout-zebra = 'X' .
ps_layout-grid_title = 'Students Details'.
ps_layout-smalltitle = 'X' .
ENDFORM. " prepare_layout
Regards,
Tanveer.
Mark helpful answers
Message was edited by: Tanveer Shaikh -
Code hints for id's and classes, already used in CSS
Often when writing CSS I have to repeat #idnames and .classnames again and again, because I tend to write like this:
#myelement {}
#myelement .inner {}
#myelement .inner .subdiv {}
#myelement .inner .subdiv ul li {}
#myelement .inner .subdiv ul li a {}
#myelement .inner .subdiv ul li a:hover {}
Is there a code completion for already used id's and classes in the CSS CodeView in Dreamweaver?
I know the HTML Codeview give you hints for id's and classes from the CSS, but I want hints for id's and classes inside the CSS View.
I know this from Aptana and it is really handy so I've just wondered.
Thanks for answers.
PeteHello Susan;
I don't know if this helps, but I was having code hint issues also, here is the link to the discussion.
http://forums.adobe.com/thread/553610?tstart=0
John -
When will training videos for creative cloud be updated?
Please let us know when new videos will be posted?
I will need good videos for new people on my team.
In general, videos (that as of a few days ago were available through the "Training" link from the Creative Cloud) are old and out of date. They are still advertised in a link to the right as "New Tutorial Videos."
-All videos are for previous interface
Videos with entirely unusable information?
"Recovering Deleted Files in Creative Cloud"
"Selecting, Moving, and Deleting Files in Creative Cloud"
Videos that are mostly accurate, though interface remains different:
"Managing Individual Creative Files in Creative Cloud"
"Sharing and Downloading Files in Creative Cloud"
I have not seen any answers on this topic. Let me know if they already exist.
There were no results for when will training videos for creative cloud be updated?I posted with screenshots how to Archive and Permanently Files here http://forums.adobe.com/message/5087298#5087298.
If you have questions about how to do specific things let me know and I will post screenshots. -
Hello,
I am looking for training with the creative cloud. Are there any online classes that go along with my subscription? I'm not talking about simple training videos - I need full training for my employees. Perhaps an online seminar?
Thanks!I ended up taking the RCP Quickstart class online by Modular Mind and it more than met my expectations: Patrick (the instructor) covered the topics very thoroughly and I particularly liked the format of the class.
This online class lacks nothing in comparison to on-site training classes because the size of the class is small, the notes for the class are exceptional and you can ask any question at any time.
I was very happy with Patrick's passion and level of expertise not only in Eclipse plugin development and RCP but also in the maven-based build "tycho" which my team uses. I highly recommend this class to anyone who wants to learn RCP in a very fast and effective way.
Maybe you are looking for
-
I have a new iPad2 16GB+3G. ( Only got this yesterday.) I have set up a wireless router so am able to use WiFi at home. When I attempt to set up a cellular data connection (ATT) I get to the "view account" which asks for my login ID and password, wh
-
New payment terms with Due December 15th 2011
Dear All, My business requirement is to create new payment terms with due date upto December 15th 2011 from the using of that payment terms, Please suggest the step by step to create this kind of payment terms, Thanks in advance, Sridhar
-
CANON 350D with Apple camera connector problem !
Dear all, Can somebody help me out with the following problem: When I connect my 350d to my new Apple video 60GB via the original Apple camera connector I get the message device unknown and it simple will not import any images stored on the 350 D Hop
-
Forefront 2010 for Exchange- SPAM mails block
Hi we have installed forefront 2010 in edge transport servers. we are getting SPAM mails from external and attachment are scanned successfully but mails are delivered to recipient. is there any way to stop the entire mails when attachment are detecte
-
My iMac computer won't load my email from the local carrier until I have been on the computer at least 10 minutes. They say it is not them. It is Apple. Any suggestions? Thanks!