Looking for a handset with certain features...
Hi,
I want to replace my cordless DECT handsets (currently BT XC 200) with a new set. I have some specific requirements and having trouble searching for the specifications via shopping sites.
What I am looking for:
- 2 cordless handsets, or 1 fixed handset and 1 cordless
- DECT
- Need hands free and/or an ability to connect some sort of headset
- Dont need answer machine
- Need the ability to store long phone numbers and pauses into the phone. Looking for more than 35 numbers/codes. My XC200 does this - but the amount of numbers you can store is limited to about 20.
Its this last requirement that is tricky to search for as it is not specified on most websites.
Any help would be very much appreciated.
Neil
Hi A-Mo,
I'm very sorry that your husband's PowerShot SD1100 IS was stolen!
The SD camera line has been replaced by the PowerShot ELPH lineup. These cameras are improved in a number of important ways, such as better zoom lenses, and sensitivity to light for existing light photography.
I recommend that you consider the PowerShot ELPH 310 HS. This camera has an 8x optical zoom lens (vs. 3x for the PowerShot SD1100 IS), has a higher ISO of 3200 (vs. 1600) for low light photography and shoots video in "full" high definition (1920 x 1080 resolution) (vs. 640 x 480).
Please note: none of the cameras in this group of cameras includes the optical viewfinder you had on the PowerShot SD1100 IS,
I hope this is helpful.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Similar Messages
-
Looking for a pager with advanced functionalities
Hello everyone,
I am looking for a pager with which I could put custom icons for the different workspaces.
I have an HTPC that is mainly used for three things: watching movies, playing music and browsing the internet. Therefore, I would like to have four workspaces, one for each of these and another one for administration. Since this is an HTPC, I'd like it to look good and I think it would be neat to have images instead of numbers/squares for the workspaces: a movie reel for the "movies" workspace, a note for "music", etc... I have been looking at pagers on the wiki, but most of the links are broken. I am currently running XFCE, but would install another WM for this. The idea came to me because I could do this on awesome 3, which is installed on my laptop, but my roommates are firmly opposed to a tiling WM on the HTPC.
If anybody can provide suggestions, they will be very welcome.
Cheers,
FrançoisHowdy-ha- flamirande. I don't want to be a total prick, as it's not my place; it's yours. Xfwm or Awesome will get the job done, won't it? You might be able to wow them if you get a universal remote and set up a proper lirc connection, letting them sit on the couch and have the power at the press of a finger. I have some friends with XBMC (the real thing--a dedicated, old-school Xbox hacked with BSD for all their media), and they're more satisfied with the results it provides than how it looks. Yeah, their Win and Mac PCs (both my friends' and your roomates') give them Facebook and YouTube, but yours gives them music, movies and tv and internet on demand, at a smaller resource cost and with a more versatile core and interface. If they're so touchy about polish, let them figure it out. I'm not just saying this as the sorry excuse for a computer geek that I am, but also as a person who's been dealing with many roommates for roughly a decade. I mean I don't know your situation but what do they think, the setup you give 'em is supposed to get them attention?
If these folks can't be satisfied by the fact that your system can provide them with a reliable, versatile, centralized, kick-ass setup that theirs can't, well...
More constructively: If they just won't have it...maybe openbox and tint2? You've got a low ram and cpu demand there, keeping music from skipping and video from tearing, if you work it out properly. Openbox has always been my choice for the right balance between polish and minimalism. -
Looking for sample template with the check on the bottom of the page
Customer is looking for sample template with the check on the bottom of the page, anyone know of one? Their Bank doesn't like the check on the top of the page because when you rip the check from the stub is sometimes rips the microline. -Thanks
Hi Dale,
Check this one(template attached) : http://blogs.oracle.com/xmlpublisher/2006/04/13/#a12
You just need to flip the invoice and check position,..
regards.. -
Looking for photo frame with lots of features
Look for ipad photo frame app. One that will let me display pics from various sources, like facebook, my servers in the home, flickr.
ThanksI tried many apps, but I narrowed it down to... Iphonso.com Air Frame.
It lets you view your facebook photos or friends', flickr via a bunch of categories, or enter tags. It includes your local photos.
It does not have the ability yet to to include your network shares, but I am hoping they include this in the next version.
So now looking at pics that are being streamed in from remote site, and at the same time listening to music that is also streamed in (via Home Sharing). Bliss.
Thanks for all your help
Message was edited by: doobias123 -
Quick look for text files with non-registered extensions
It seems there was a way in 10.5 and 10.6 to register certain extensions with Quick Look to tell them how to preview a file. I have a lot of plain text files with different extensions that are not initially recognized by Quick Look. How do I hack the registry to tell Quick Look to preview a .cfg (or .aux, etc.) file as plain text?
Can't Quick Look for some text files
Re: Is it possible to change the viewing format?
Quick Look for files without extensions.
Re: Can I view text files without a .txt extension in Quick Look?
How do I add support to Quick Look -
I'm looking for a computer with these specifications, can anyone help me?
I need to know if anyone can give me the names of a few laptops that have these MINIMUM specifications:
Intel Pentium 4 or AMD Athlon 64 Processor or any better processor
4 GB of RAM
Windows 7
1280 X 800 or more with qualified hardware-accelerated OpenGL graphics card, 16 bit color, and 256MB of dedicated VRAM (not Shared Memory)
Graphics support for Shader Model 3.0, and OpenGL 2.0, DirectX 9-capable graphics card.
DVD-drive compatible with dual-layer DVDs, Read/Write drive
QuickTime 7.6.2 or newer
I'm going to an art school, and will probably be getting into some Graphic Design stuff, so if you don't know a computer that has a lot of these specific terms, could you give me perhaps a few names of good laptops for art students to buy?Hello Balkoth,
I work for Intel and aside from this being my job, I'm going to tell you to consider investing in a stronger processor. If you are going to be getting into Graphic Design, you will need more processing power. For your needs, I would suggest looking into the new Intel® Core™ i7 processor.
This is our top-of-the-line processor, ahead of the curve and will continue to perform as technologies continue to emerge. Not only will you have graphics support for Shader Model 3.0, and OpenGL 2.0, DirectX 9-capable graphics cards, but the i7 has Turbo Boost Technology (Speeds up your processor when you computer needs more performance) and Hyper-Threading Technology (multitasking that allows your computer to work on two tasks at the same time). Even if you don't need all of these features now, you never know what you will need down the line. My general rule of thumb is to never buy something that is already behind the curve.
I would also recommend you looking into our other smart processors, i3 and i5, but I believe the i7 will be the best for your processing needs. Here is a couple computers I found with i7 processors and Windows 7 that you were looking for. Hope this helps!
Intel- Sponsors of Tomorrow
Dell Studio Laptop with Intel® Core™ i7 Processor - Black Chainlink
Model: S1747-3209CBK | SKU: 9718895
Watch your favorite movies in high-definition or create customized CDs and DVDs with this laptop's DVD±RW/CD-RW drive with Blu-ray Disc support. The built-in 2.0MP webcam and 17.3" high-definition plus display are handy for video chatting with friends and family. Windows 7 Home Premium preloaded Which Windows 7 edition is best for you? Compare.Learn more about Intel® processors. Information provided by Intel.
4.7 Read reviews (65)
Sale: $949.99
Toshiba Satellite Laptop / Intel® Core™ i7 Processor / 16" Display - Slate
Model: A665-S6070 | SKU: 9992966
This laptop features an Intel® Core™ i7 processor, 4GB memory and a 640GB hard drive for fast computing and ample file storage. The 16" widescreen TFT-LCD display and NVIDIA GeForce graphics provide a crisp, clear picture.Windows 7 Home Premium preloaded Which Windows 7 edition is best for you? Compare.Learn more about Intel® processors. Information provided by Intel. Take a product tour.
1 Read reviews (1)
Sale: $899.99
Apple® MacBook® Pro / Intel® Core™ i5 Processor / 15.4" Display - Aluminum
Model: MC372LL/A | SKU: 9911539
Video chat with friends and family using this laptop's iSight webcam with omnidirectional microphone and 15.4" widescreen display. Enjoy high-speed wireless access via the built-in AirPort Extreme wireless network connection.
5 Read reviews (5)
Sale: $1999.99
I am an Intel employee and state that my opinions are my own personal opinions and are not made on behalf, or to represent, Intel. -
Looking for help-DVD with web/email links
Hall writes...
"snip...DVD@ccess is actually quite limited and not entirely compatible with the range of DVD playback software/hardware available on a PC... you might be better off using eDVD from Sonic (which is PC software, making use of the Interactual Player, rather than @ccess)."
I've no experience with Sonic yet but there is a small project in Chicago that needs help immediately. I'm looking for leads to pass on.
[email protected]
ThanksWell, there's the rub.
If you use DVD@ccess then pretty much every Mac will run the software easily enough, but you have to install it on a PC and even then it doesn't work as it should in a lot of cases.
If you use eDVD then PCs will almost certainly already have the player installed (since it is a far more ubiquitous piece of software than @ccess, and is used by a high number of commercial discs already in circulation), but you'll need to install the Interactual player on the Mac...
There are probably going to be far less Mac users than PC users - which might indicate that you go for eDVD and a more PC friendly solution.
But don't be fooled - eDVD is not the saviour that we all hope it will be. There are still issues on some PCs with it, and as you have already found, some issues on a Mac as well. The thing to consider is whether the eDVD solution gives more compatibility overall with your target users than DVD@ccess will.
You could opt for a more simple solution and just place the documents that you want included into a ROM folder on the disc, then use a menu to explain what's there and how to get to it.
The strong advantage here is that you'd have to create that menu anyway for those who view the disc in a set top player, and you are also not trying to post edit your files (as eDVD requires) or use software that simply isn't good enough on PCs (as @ccess seems to be).
It may be a less elegant and less gimmicky option, but I'll bet hardly any of your users will know the difference anyway... -
Looking for calorie tracker with monthly totals
I'm looking for an app which will track my workouts and give me monthly totals on calories lost. Is there such thing? If not then I just need the best calorie tracker on the iPhone. I had this neat app on the Droid called cardiotrainer it did the trick but the iPhone doesn't have it.
Thank youGoing to the third party re-seller could be part of the issue, but also VZW now has a rule that if you go to a feature phone from a Smartphone, you have x amount of days to get back on a smartphone and keep unlimited data.Not much you can do to get around that.
Going back to the Reseller. Even if VZW was able to get you back on the plan, you most likely would be hit with a $300+ETF from the reseller for changing something on your plan within 181 of sgning the contract with them.
Either way, you would be paying more. -
Looking for a webmail with multiple accounts support
Hi,
I would like to set up a webmail on my server which I will use to check my various mail accounts on gmail and others.
I tried mutt, alpine, claws-mail, but I don't really like "true" mail clients, I prefer to use webmails (so it can render HTML mails, and I can access it from anywhere). But since I have many accounts, I can't (and don't want) to use the gmail webmail.
So I'm looking for a webmail which could transparently handle multiple accounts from different mail providers. I will be the only one using it so I don't even need multiple users to log on.
Does it exists? What would you recommend? I don't know anything about webmails.
My server is running lighttpd, with php and python (webpy). I'm not afraid of modifying some of the code if needed.
Thanks.
Last edited by pokraka (2010-07-13 15:36:59)You can collect mail to your server, sort it (say have one local account with one folder per mail account), and view it via webmail.
Check this wiki articles:
http://wiki.archlinux.org/index.php/Ema … l_procmail
http://wiki.archlinux.org/index.php/Squirrelmail
I don't use this setup so I don't know how it works, but looks like what you are looking for. -
I am currently recently graduated from the University of Technology in Belfort-Montbeliard (France).
Master’s grade of “Electrical and control systems engineering”.
I am currently looking for a job in automation, control systems and electronic domain (I prefere LabView Developpement)
Salim DARWICHE
1 rue antonin artaud
31320 castanet tolosan
Tel: 0033.6.85485107
Email : [email protected]
Nationalities :
- French
- Lebanese
Date and place of birth:
April 18, 1986
Toulouse,
France
Education
2009
Master in Electrical and Control Systems Engineering
Option Embedded
systems
University of technology of Belfort-Montbliard france
2006 University
Diploma in Industrial and Maintenance Engineering
DUT Degree Equivalent to 3 years of
technical studies
Institute of technology of Saida
Lebanon
Experience
February
July 2009 Galley-Technologies (Neuchatel-Switzerland)
Mission:
Development of
Labview Modules for Pharmaceutics and Robotics
industries
Realization(s):
Communication and data-Analyse Software using
TCP/IP:
- Development of a software (Labview Programming) that would permit data
transfer between many pharmaceutical ovens, in order to analyse all production cycle, and test
the conformity of the final products.
5 Axis robot simulation software:
Concept and development of simulation tool for a robot working cycle
September 2007
February 2008 Valeo VSS (Paris France)
Mission:
Qualification and management of
automobile electronic components
Qualification of specific electronic components
Making sure that all electronics components will be qualified on time before the
Start-of-Project
- Discussion between me, Valeo supplier and Valeo Project Manager in order
to grant Valeo quality standard Specifications or to approve supplier deviations.
Management of electronic qualification documents on Valeo ePLM system.
- Participating to
daily quality reviews meetings and brainstorming in order to apply a PDCA (plan Do Check
Act)
Management of Valeo DSA products under IMDS Base
- Management and
declaration of Valeo Division Systems Access products under IMDS base (international Material
data systems)
- Creating MDS sheets then sending them to Automobile
Constructors.
February June 2006 United-Group Machinery
(Beirut-Lebanon)
Mission:
Renovating a bag-filling
machine
Realization(s):
Mechanical system
- Drawing all parts of
the machine (3D), assembly and motion using Autodesk Inventor.
- Unmount, replacing bad
parts then assembly of the machine.
- Integrating of a weigher machine to the top of the
bag-filling machine.
Control system
-Removing old control system and
integrating a PLC and a control panel
-Programming the PLC (Delta type) with Ladder
diagram.
Knowledge
Languages
French
and Arabic: Native languages.
English: fluent, TOEIC 890/990 Test of English for
International Communication.
Spanish: Intermediate.
Automation
- Labview,
Matlab Simulink
-Programming DSP Controller TMS320LF2407.
-Programming in languages:
assembler, C.
- PLC Programming (Crouzet, Delta, tlmcanique, Moller) -Ladder, List,
Grafcet-
-Controlled systems: Continuous aspect
Electronics
-Programming in
VHDL.
-Programming of PIC 16F87X.
-Simulation (Simplorer, Circuit maker, Electronic
Workbench, Proteus, Kicad).
Electrical
- Machines D.C. current, synchronous,
asynchronous, electrical supply networks.
Various
- CAD: AutoCAD, Autodesk
Inventor, Mastercam, Programming of machines with numerical control CNC (languages Num, Fanuc,
Fagor).
-CAM: Ms-Project (Gantt, Pert, Kanban)
Message Edité par salimo le 11-04-2009 04:35 PM
~~~~~~~~~~~~~~~~~~Looking for a LABVIEW JOB (In EUROPE)>~~~~~~~~~~~~~~~~~~
**The Best Way To Predict**The**Future Is To Invent It**
Attachments:
CV_Salim_Darwiche_S_12_10_09.doc 77 KB
CV_SalimDARWICHE_EN_S.doc 229 KBMessage Edité par salimo le 11-04-2009 04:36 PM
~~~~~~~~~~~~~~~~~~Looking for a LABVIEW JOB (In EUROPE)>~~~~~~~~~~~~~~~~~~
**The Best Way To Predict**The**Future Is To Invent It** -
My company is looking for a consultant with NKE experience
Hi
My company need to write an NKE in order to port our product to OS X. We've studied the documentation and example NKE projects and know what to do and how to go about it.
However, that's in theory, when developing for an OS on which you have no experience its always slower, and obstacles are encountered, and you can't be 100% sure the design is optimal, or won't create unanticipated problems.
So we're looking for somebody with proven expertise in developing NKEs who may be interested in some paid consultancy work on a per-need basis, activities could be design review, code review, guru to ask questions if something unexpected happens etc.
We're based in Vancouver, Canada. If there is somebody nearby in the Pacific Northwest that would be ideal as it means face to face meetings are possible. But this isn't essential.
If you might be interested drop me a reply.niuniu wrote:
We're based in Vancouver, Canada. If there is somebody nearby in the Pacific Northwest that would be ideal as it means face to face meetings are possible. But this isn't essential.
Hey, don't you need a favorable market opinion letter from the HRSDC before you can hire a non-Canadian? -
I have bought OSX Lion 1 month back paying $29.99, and now new OS is getting released, there will any updates for the OSX Lion with new features or I have to again buy it paying $19.99, Please let me know??
http://www.apple.com/osx/uptodate/
-
Looking for a designer with experience working on Motorsport projects
I am looking for a web designer with specific experience working on Motorsport websites. The project will be to design a BC site for a racing team which we will implement. If you believe you are qualified for a project like this please send me details of your portfolio and your rate. Note I am looking for someone who has actually worked on motorsport website, so will need to see evidence of this experience. If you do not have this experience please do not apply. Please PM me if you are qualified.
Hi Sir/Madam,
I recently Completed my PG Diploma Graduate in Industrial Automation and System Design from National Institute of Electronics and Information Technology (NIELIT) Calicut with 72.2%.I am good labVIEW Programmer and I am seeking job in labVIEW Sector, please help me where i could get the job in labview Sector.
Please find the attached resume.
Thanks & Regards,
Ravi Kumar
+91-9000324146
E-mail: [email protected]
Attachments:
resume ravi new formetpdf.pdf 65 KB -
Looking for LabVIEW Developer with 2-3 years of experience for Mumbai based Company
Software Plantation, Mumbai is currently looking for LabVIEW Developer who can contribute to the development of automated test, data acquisition, and control systems using National Instruments LabVIEW.
This position is located at Lokhandwala, Andheri West, Mumbai.
Requirements:
Applicant must meet the following criteria:
2+ years of LabVIEW experience.
Should be from Engineering background.
Knowledge of various communication protocols like RS-232, Modbus, USB, etc.
Knowledge of NI DAQ hardware boards.
Automated test, measurement, data acquisition, and/or control experience.
Good at documentation.
Knowledge of Software Development Cycle
Must be able to meet objectives as directed.
Ability to effectively work independently.
Ability to contribute and work in a team environment.
Ability to adapt to changing requirements, rapidly absorb new concepts, and apply them effectively.
Good communication skills.
CLAD certified developer will be preferred. Knowledge of C/C++, Linux is an added advantage.
If your background and qualifications match this position, please send your resume via email with subject line as: 'LabVIEW Developer Application'.
E-Mail: [email protected]
Note: Please do not post your resume on the job forum. Mail it to the above mentioned email ID.Kindly send me your resumes on [email protected]
-
Looking for APEX tutoring (with pay) in NJ - urgent -
Hi,
I'm a newbie to APEX, and trying to get the project up and running. I can get a simple form up, but the project I'm doing is more than a simple form. I have not got a chance to get any training yet. Looking for APEX tutoring in NJ with pay.
Please let me know promptly.
Appreciated,
HelenHelen,
First of all, welcome to the forums and the wonderful world of APEX development.
Before recommending anything, it would be really good to know a little bit about your background and how comfortable you are with Oracle, SQL, and PL/SQL. If you're completely new to Oracle (i.e. you've been working with EXCEL and ACCESS), I would recommend a completely different path than someone who is coming at this from a long history of Oracle Forms development, and different again form someone that has Java or other Web development experiene.
Can you help us out with some information about your programming background?
In general, I agree with Don. The 2 Day developer and Advanced Tutorial white papers will give you a good start, by letting you peek under the covers of what is possible with Application Express. There are also a couple good books that might help depending on where you're coming from and what your skill level is.
However, there is nothing like getting yourself into a learning environment that allows you to ask questions specific to what you're trying to achieve in the real world.
The company I work for ( [Sumner Technologies|www.sumnertech.com] ) also provides APEX training at the beginner, intermediate and advanced levels. We can provide these classes in a public forum, as private on-site classes, or we also provide instructor lead online training classes as well. We have several classes scheduled through the end of the year so check [http://www.sumnertech.com/training|http://www.sumnertech.com/training] for a list of available courses and our public/Online schedule).
What course best suits you will obviously depend on where you're starting from, but we can definitely help there.
Feel free to give us a call at (703) 879-4615. We'll be happy to help.
Doug Gault
VP, Sumner Technologies
Maybe you are looking for
-
We have a project in which we would like to super-impose or place banners on buildings in a live shot. The effect would have to account for some wind-effects so that it will be semi realistic. Does anyone know if this is feasible?
-
How to handle discripency of stock
we are into retail. i want to know how to handle following scenario. in case of stock transfers between stores and DC through creation of stock transfer request(UB) how to handle the discripency. for example store A sent 1000 qty of various article t
-
PSE 8 Exposure and Panoramic Merge Blur
When I am doing Exposure and Panoramic Merges in PSE 8, or a combination of both for exposure reasons, I often get background features that are double images. In the above merge, the leaves and some of the smaller branches in the background (lo
-
Ability to browse network or manually specify path
There is no way to browse to network locations that have not already been mapped. Network locations that already appear in "the Network Neighborhood" are accessible from Bridge. But the is no known logic with which to force items to appear "in the ne
-
most links I try takes me to the same blank page with type a web address at top nothing else on entire page