Looking for a Layout Set to display images one at a time

Hello,
I have a folder with images and I would like to create a KM Navigation iView which displays only one picture at a time and an option to move forward and backward between the images. Which LayoutSet/ Collection Render should I Use/create in order to acheivi this?
Roy

Hi Roy,
> Which tool did you used to test
> the HTTP Request by the way?
> > checked with HttpWatch
(That is in fact the name of the tool.)
Best regards
Detlev

Similar Messages

With Adobe Flash, the image is looking for a "zoom" setting and does not find it. The result is that the imbedded image is too large for the space allowed. Is there a zoom setting for Firefox?

When running FB game apps, the image loaded is too large for the FB space. The program looks for a "zoom" setting and does not find it. This was from the error screen. I have not been able to locate where the image zoom is located (found the font adjustment). I am new to FireFox and would like to sort this out please.
Your installed plug in assume Shockwave Flash 10.3, but I thought it was Adobe Flash 10.3. Are they one and the same?
Below is the warning message from the Error Console

I'm not sure the CSS warning is relevant to Flash. Maybe adjust your overall zoom level on Facebook manually from the View menu?
View > Zoom
If you have the orange Firefox button, tap the Alt key to display the classic menu bar.

How to create a custom layout set to display the KM folders...

Could someone please tell me how to create a custom layout set to display the KM folders?
Thanks,
Sudha.

Hi Sudha,
Please check the following blogs whick will guide you step by step.
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/4123
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3071
http://help.sap.com/saphelp_nw2004s/helpdata/en/c3/c91b5610b65b4aa8204d09384d156b/frameset.htm
If helps reward points
cheers
dev

SCOM - -500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed

Hi There,
Need your assistance on the issue that we are facing in prod environment.
We are able to open web console from remote machine and able to view monitoring pane as well as my workplace folders from console . Able to view and access alerts and other folder in the monitoring pane. We are able to view and access My Workplace folder
and able to view the reports in Favorite Reports folder. But when I click on run Report we are getting the below error "500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed."
In our environment we have 3 servers one is SQL server and two are SCOM servers. Please advise how to fix this issue. Do we have to do any thing from SQL End?
Errors: Event ID 21029: Performance data from the OpsMgr connector could not be collected since opening the shared data failed with error "5L".
Event ID 6002 : Performance data from the Health Service could not be collected since opening the shared data failed with error 5L (Access is denied.).
Regards,
Sanjeev Kumar

Duplicate thread：
http://social.technet.microsoft.com/Forums/en-US/7675113e-49f0-4b3a-932b-4aceb3cfa981/scom-500-internal-server-error-there-is-a-problem-with-the-resource-you-are-looking-for-and-it?forum=operationsmanagerreporting
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Looking for a broken iMac G4 Display with arm

Hi, im looking for a broken iMac G4 Display with arm included, i need it for a school project, so if anyone knows where i could get/buy one please tell me. Thanks!

Hi, there should be lots of iMac parts machines in fact I just looked at one auction a second ago.
http://cgi.ebay.com/Apple-iMac-G4-1GHz-17-for-PartsW0QQitemZ200364020743QQcmdZViewItemQQptZApple_Desktops?hash=item2ea6a05407&_trks id=p3286.c0.m14&trkparms=65%3A12%7C66%3A2%7C39%3A1%7C72%3A1234%7C293%3A1%7C294%3A50
You must be searching with the wrong keywords....
Kevin

502 - Web server received an invalid response while acting as a gateway or proxy server. There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream cont

I am getting error while accessing url of lyncweb.domain.com, dialin.domain.com and meet.domain.com pointing to RP server.
502 - Web server received an invalid response while acting as a gateway or proxy server.
There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

When i try with https://lyncfrontend.domain.local:4443 and https://lyncfrontend.domain.com:4443 both opens but when i open the external domain name i get certificate .
ARR version installed is 3.0
To throw more light on the configuration:
Lync 2013 implemented, internal domain name is : domain.local and external domain name is : domain.com
All servers in VMs are with 4 core processor, 24gb ram, 1TB drive.
Frontend : Windows 2012r2 with Lync 2012 Standard Edition - 1 No (192.168.10.100)
Edge : Windows 2012 with Lync 2012 Std - 1 No
(192.168.11.101 DMZ) in workgroup
ISS ARR Reverse Proxy 3.0 : Windows 2012 with ARR and IIS configured. (192.168.11.102)
Certificate : Internal Domain root CA for internal and External (Digicert).
Internal Network : 192.168.10.x /24
External Network (DMZ) : 192.168.11.x /24
Public Firewall NAT to DMZ ip for firewall and RP server. So having two public IP facing external network.
Edge has : sip.domain.com, webconf.domain.com, av.domain.com
IIS ARR RP server has : lyncdiscover.domain.com, lyncweb.domain.com, meet.domain.com, dialin.domain.com
Have created SRV record in public : _sip.tls.domain.com >5061>sip.domain.com, _sipfederationtls._tcp.domain.com>5061>sip.domain.com, _xmpp-server._tcp.domain.com>5269>sip.domain.com
Installed frontend server using MS Lync server 2013 step by step for anyone by Matt Landis, Lync MVP.
Internal AD Integrated DNS pointing Front-end
Type of Record FQDN
IP Description
A sip.domain.com
192.168.10.100 Address internal Front End or Director for internal network clients
A admin.domain.com
192.168.10.100 URL Administration pool
A DialIn.domain.com
192.168.10.100 URL Access to Dial In
A meet.domain.com
192.168.10.100 URL of Web services meeting
A lyncdiscoverinternal.domain.com
192.168.10.100 Register for Lync AutoDiscover service to internal users
A lyncdiscover.domain.com
192.168.10.100 Register for Lync AutoDiscover service to external users
SRV Service: _sipinternaltls Protocol: _tcp Port: 5061
sip.domain.com Record pointer services to internal customer connections using TLS
External DNS pointing Edge & Proxy
Type of Record FQDN
IP Endpoint
A sip.domain.com
x.x.x.100 Edge
A webconf.domain.com
x.x.x.100 Edge
A av.domain.com
x.x.x.100 Edge
SRV _sip._tls.domain.com
sip.domain.com: 443 Edge
SRV _sipfederationtls._tcp.domain.com
sip.domain.com:5061 Edge
A Meet.domain.com
x.x.x.110 Reverse Proxy
A Dialin.domain.com
x.x.x.110 Reverse Proxy
A lyncdiscover.domain.com
x.x.x.110 Reverse Proxy
A lyncweb.domain.com
x.x.x.110 Reverse Proxy
In IIS ARR proxy server following server farms are added and configured as per link ttp://y0av.me/2013/07/22/lync2013_iisarr/
In proxy server had setup only following server farm : While running remote connectivity web service test : meet, dialin, lyncdiscover and lyncweb.
The client inside works fine internally and through vpn. Login with external client also working fine. But we are getting error in MRCA as follows.
a) While testing remote connectivity for lync getting error : The certificate couldn't be validated because SSL negotiation wasn't successful. This could have occurred as a result of a network error or because of a problem with the certificate installation.
Certificate was installed properly.
b) For remote web test under Lync throws error : A Web exception occurred because an HTTP 502 - BadGateway response was received from IIS7.
HTTP Response Headers:
Content-Length: 1477
Content-Type: text/html
Date: Wed, 14 May 2014 10:03:40 GMT
Server: Microsoft-IIS/8.0
Elapsed Time: 1300 ms.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

Problem in displaying images one by one in JList

I have a problem in displaying images one by one in Jlist. I want to show 100 images as a thumbnailview in jlist but it is talking too much time to show all the images after scalling 100 images to thumbnail view and making it into ImageIcon. So, i thought that it would be better way to show one by one after scaling it into thumnailview. But my renderer is getting calling after 100 images scaled down and setting into list. I have posted my code 2 days back but there is no reply.
http://forum.java.sun.com/thread.jspa?threadID=789943
I donno where i am missing in this code.
Plz suggest me some solution for it.

Where is the scaling done? In the ListCellRenderer? Regardless of where that is being done, I assume you are caching the scaled images after you scale them, right? If not, consider adding some sort of caching.
This should do the trick...
Rework your ListCellRenderer to check to see if a scaled version of the image is available. If not, start a thread to do the scaling and create an ImageIcon. In the meantime, while that thread is running, have the renderer return some sort of stock icon, like a little generic image icon. When the scaling thread completes, make a call to repaint() on the JList so the cell renderer gets re-asked for the icons. This time around, the renderer should notice that a scaled version (the ImageIcon) is available. Return that. So, this method doesn't guarantee that the images will be produced in order, 1...2...3..., but it will return images as they become available, and the overall JList rendering won't wait until all 100 are ready. If you want them returned in order, just do all of the scaling in a single thread and queue up the images to be scaled, in order.
I hoped this helps. (If it does, please throw me some Duke Dollars.)

I have a cooliris wall embedded in a website I built. IE shows it but Foxfire doesn't. I've looked for an add-on but the cooliris one goes to its own wall. I updated to ff4 but no difference. Is there a plug in I need?

I have a cooliris wall embedded in a website I built. IE shows it but Foxfire doesn't. I've looked for an add-on but the cooliris one goes to its own wall. I updated to ff4 but no difference.

I want all my devices to be on a password related internet but the double nat on my TC makes weird things happen and slow. I try bridge mode but the internet doesn't work.
You building supplied internet is a cheap service that is without proper routable addresses..
Therefore to use more than one IP you MUST have double NAT.. sorry there is no choice..
Slow that is because you are sharing internet with every other person in the building.. get your own broadband service.
Bridge will not work.. it cannot work because the building only has private IP addressing. And they only give you a single address.
You can put a password on the wireless.. go to the airport utility and put in a password.
Other than that I don't understand what password you expect.
Can I get an explanation of what bridge mode is?
No NAT.. means the TC becomes a dumb Wireless AP and switch.. works fine with a cable modem router.. or any broadband router but useless with your building system.
Can I get suggestions on what I should do to use the TC as a wireless device to spread the same wireless device my apartment is broadcasting?
Double NAT, and set your own wireless names. There is no alternative.. sorry.

I am looking for an app that will allow me to change the times on my desktop pictures

I am wanting an app that will allow me more choices in changing the "change time" of my desktop pictures. 5 seconds in too fast, one minute longer than i want. I am looking for something that will give me a 10-15 second time.
Any suggestions?

Hi.
Pages, part of the iWork suite from Apple.
File formats supported by Pages
iWork system requirements
I hope this is helpful.

My MacBook Pro DVD drive keeps spinning and looking for a disc when there isn't one.

My MacBook Pro disc drive keeps spinning and looking for a disc when there isn't one in there. The DVD application is closed and as far as I can tell, the eject button is not stuck. I've restarted, but the problem persists. Please help!

Try these methods:
credit Kappy,
Ciao.

I am looking for a double charger 2 iPads at one time, is it out there?

I am looking for a double charger, 2 iPads at one time, is it out there?

Sorting and rearranging bookmarks - Firefox (and working with bookmarks) http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox   
*SortPlaces sorts ALL of your bookmarks in 3-6 seconds, suggest not doing automatic sorting https://addons.mozilla.org/firefox/addon/sortplaces/
*Go Parent Folder locate the Bookmark folder for a Bookmark in Bookmarks search results https://addons.mozilla.org/firefox/addon/go-parent-folder/
*'''Show Parent Folder''' adds a column to the Library List ("Ctrl+Shift+B" > View menu) https://addons.mozilla.org/firefox/addon/show-parent-folder/ 
After installing "Show Parent Folder" add the "Parent folder" column by double-clicking on any column header in the Library List, you cannot sort on the "Parent folder": column, and you should go to the extension's options and turn on "Show folder hierarchy".

Looking for a way to Export Still Image to iPhoto

Hi I'm looking for a way to export a still image from iMovie 08 to iPhoto 08? The simple drag, help, web search etc doesn't seem to come up with an answer but it's been a long day.
Thanks

Find the still within an event clip, right mouse, select add still frame to project. Repeat for all the stills you want.
In Finder under pictures, you should find files for all the stills you created. Import them into Iphoto and there you have it.
There is probably an easier way but this is not too bad.

Athlete Looking for an iPod Set-Up

Hello-
I am going to switch t the iPod, but since I listened to Mr. Jobs podcast on all the changes that were happening (about 3 weeks ago), I thought I would try to get some help with getting a good set-up for my triathlon and biathlon trials and practice. I need music and I guess the only place I can download music now is from my itunes. Is that true with an Apple iPod? I have looked at about 100 in-the-earphones, some from this site, some from Ultimate ears, and some from EarPhone Solutions. Very confusing but I like the in-the-ear approach since that was my main problem-the ear piece kept flopping out. I know when I wear ear plugs, in -the-ear, sometimes they can give a hollow or echo sound, and sometimes I can even hear my heart beat pounding against the ear plug and my inner ear canal.
Not sure on all the changes. the iPod Touch looks cool but how does it hook up to Wifi? Is it only at hotspots or can you get a service that you can get hooked up where ever you are, kind of like 3 or 4 G.
Since I need a sturdy and very high quality iPod holder, some good in-the -earphones (the ones with the ear hook on them seem pretty cool. Is that just an ear hook that you could use for any earphone? If anybody knows of a good set-up with a recommendation on an iPod, the arm or waist solid holder (it does not have to be on Apple.com), good but not priced out of this world earphones, I would really appreciate it.
I basically need it for music. The WiFi sounds good, but that would be used during a different time, unless I could get a connection when I was lost. lol. As far as all the extras, they can be good, but I am really primarily looking for the best sound, the best earphones, and the best holster or arm band.
yes, I have been to the Apple Store top try them out but it was a zoo. I never did find out about the WiFi on the Touch. If there will be a way I could get online wherever I was, I would like the Touch. For my purposes, I have no need for videos. Can you watch movies (full length HD and do they have to be downloaded from iTunes?)
If the learning curve is high with the Touch, I would need a good set of articles that explains all the main functions I would need to do in order to at least get me up and running.
Thanks in advance for any input you can give me.
cheers!

sei_pc
There is no comprehensive usage monitoring app available for the iPod Touch. However, there is
a way to limit and track internet usage (as Illass has suggested, using a Safe Browser app like the one from Mobicip. See this tutorial for more information on how to set this up), and
setup an email account with monitoring facilities (like Zoobuh, Zilladog) and setup the email client on the iPod Touch to use one such account.
At this time, there is no equivalent text message monitoring service.
Hope this helps.
Disclaimer: This response is posted by a Mobicip representative who may stand to gain indirectly from it.

Why is the left hand window and bar with the buttons for TOC/Search/Glossary not displaying in one client location?

Greetings all:
I have more years of experience with RoboHelp than I want to admit, but I have never run into this before. I have a published RoboHelp 9 project for an overseas client that displays exactly as it should when the published version is viewed by myself or another RoboHelp developer (not located where I am). However; the users at 1 of 2 two client sites do not see the left hand TOC window or the bar above the project with the buttons (the other site does see it). The users at both sites are using Internet Explorer 9, and I have been told there is no difference in their security set-up. I suspect that at the site where it is not displaying there is a security setting that is throwing it off, but I am not sure what to have them look for. Anyone have any ideas?
W. Keith

Do they not simply see the bar or is it empty? In the first situation, it seems they are opening the topic directly instead of via the start file.
What is the URL the users are using on both the locations? And do the users have a hyperlink 'Show' at the top of the topics?
Kind regards,
Willam

Looking for a desktop replacement, how will this one fare?

I think I settled on the one I am looking for...
My price range is probably no more than 1300-1500.
http://www.amazon.com/Toshiba-X875-Q7190-17-3-Inch-Diamond-Textured-Aluminum/dp/B00AY1FGYK /ref=sr_1_1?s=pc&ie=UTF8&qid=1368339116&sr=1-1&keywords=Toshiba+Qosmio
Toshiba X875-Q7190
How will this stand up to some moderate to heavy editing? I am new to the video editing world, coming from music production. I would mostly like to make simple youtube videos for man on the street stuff and work my way up to documentaries and the like, maybe around 45 mins in length or so with lots of graphics and stock footage. Will this be a good bargain for what I am looking for? I would rather it be overkill than get invested in the process of editing only to find out my computer cant cut it...
Thanks a lot you guys I am always learning more when I come here!

BTW...this is something I did recently which got me on this kick. I did it on my brothers Dell. I think it was a 17R if im not mistaken. It took it pretty well and rendering was about 2 hours for this 22min clip which is longer than I would have liked. But I didnt do any color correction or get to heavy into it, I was just learning the lay of the land for Pp.
I will mainly be using AVCHD full 1080p from my Canon Vixia M500 and 1080p from my GoPro Hero 3 Black if that makes any difference...Thanks!
heres the clip.
http://www.youtube.com/watch?feature=player_embedded&v=aOcBxMftY9U

Looking for a Layout Set to display images one at a time

Similar Messages

Maybe you are looking for