Looking for a lost loop (from old Access Virus freebie pack?)

Slightly bizarre question, but someone here might have the answer.
In the last 6 months, I've changed countries and continents, upgraded to a new Mac and new version of GarageBand -- and somewhere in this shuffle I've lost some of the freely downloaded 3rd-party loops that I'd used in some of my old GB tracks. I just opened one up today and found it complaining that certain audio files were not found.
There was a synth loop in this particular track, the effect of which I quite liked; it's called "16 Angels On Horse.aiff" (according to GB's helpful message about it not being found). I think it was from the "Access Virus Loop Collection 1.0", which unfortunately seems to be off-line and seems to have vanished long ago!). Does anyone know a live mirror site, or have a copy they could sling my way, somehow?
I'm probably missing some other loops too, but perhaps from the same pack that one came from. It'd be a start, anyway
Any clues?

OK, maybe they were from Access Virus (which I eventually found reference to on this thread: <http://discussions.apple.com/thread.jspa?threadID=1238167&tstart=780>).
I think they may have been from a Bitshift Audio loop pack instead? Same problem, though: anyone got this or know where it can be found?

Similar Messages

Looking for a drum loop app that will run in the background. What are you using?

Looking for a drum loop app that will run in the background. Suggestions? What are you using? I tried Loopseque and I like it, but I can't make it run once I switch apps. Help please.

That's definitely strange, kzmidge. I want a working phone in your hands though. I noticed you mentioned you received the suggestion to complete a reset. Did you already do that? Is it working again? Are you receiving an error message?
If you hesitated a little longer to complete the reset, you can try to place your phone into Safe Mode http://vz.to/rxg0ii and see if you can access mobile sites from your browser. This mode will stop 3rd party applications from running, so you won't be able to use the apps you mentioned but we may be able to narrow down the trouble in Safe Mode. If the mobile sites work, that means the trouble may be in a recently downloaded application and you may be able to avoid the reset my uninstalling some of your more recently installed applications. If it's still giving you trouble, the reset http://vz.to/18wzOCi is the next best step.
JenniferH_VZW
Follow us on Twitter www.twitter.com/vzwsupport

I have the new version of iMovie, and when i try to start the program, i can't because it says that it is looking for some movie files from the Iphoto, so all the program is locked up... how can i do to restart the program??

i have the new version of iMovie, and when i try to start the program, i can't because it says that it is looking for some movie files from the Iphoto, so all the program is locked up... how can i do to restart the program??

Hi
Did You ever use - iPhoto ?
Did You may be direct iPhoto to a different Photo Library
As iMovie tries to find the appropriate photo library - it can get lost if iPhoto direct it into a Library on a not connected external hard disk or to a strange location - And iMovie HANGS.
Do - When no other program is running that might interfere
• Start iPhoto - BUT NOW KEEP alt-key (option key) DOWN during the full Start-Up process
• Now iPhoto let's You select Photo Library
• Select the one in Your Account / Home folder / Pictures ! !
• Then iPhoto should start up OK
• Now Quit iPhoto
• START iMovie
Does it still hangs - then I would suspect - iMovie Pref. file
If it Run's OK - Then HURRAY !
Yours Bengt W

I keep getting a 'Looking for backup disc' message from my Time Capsule.

I keep getting a 'Looking for backup disc' message from my Time Capsule. I have set it up several times without any apparent problems (I have even done a Hard and Factory reset). Everything seems fine until I ask Timemachine to 'back up', and then the problems start.
Any ideas?

I had the exact same problem. I bought the Time Capsule this past July and it worked fine for about a month then it told me it hadn't backed up in 10 days and was stuck looking for the backup drive. I called Apple and they said the reason was that the Time Capsule was in Bridge mode. I launched Airport Utility and sure enough, it was. I changed it to DCHP and NAT (Airport Utility -> Network tab -> Router Mode). After updating the Time Capsule, I couldn't even get on the Internet, let alone do a backup. A logged into the software for my cable modem and discovered that it too was in Bridge mode.
It turned out (for me) that neither should be in Bridge mode (which is for connecting two networks). Your cable modem only has one IP address. Your Time Capsule should be doing the NAT (Network Address Translation) which translates the internal IP addresses on your network to the one IP address your cable modem has. When I switched my Time Capsule to DHCP and NAT, it conflicted with the fact that the cable modem was also trying to do this. The answer was to turn this off on the modem (allowing all the packets to just go through the modem to the Time Capsule and let IT do the NAT). I did that last week and since then, my Time Capsule has been working perfectly.
1) Go to your cable modem (via a browser, enter "http://192.168.100.1"). Log-in and find the setting that indicates NAT. If you're uncomfortable doing this or can't find it, call your cable company and ask Tech Support to do it for you. They can do it remotely.
2) Launch Airport Utilty. Go to the Network Tab and change the router mode to "DHCP and NAT".
3) You may need to restart your modem and Time Capsule. I can't remember if I had to or not.
I hope this helps. I tried many things but this is the only solution that fixed it for me. And it makes sense. Only one device, the cable modem or the Time Capsule, can be doing the NAT.

Due to the requirement of a UUT report with pageheaders, I am looking for solution to print an MS Access report from TestStand. I am using TestStand 4.2 and LabView 8.6.

Solved!
Go to Solution.

You can customize your process model with LabVIEW steps. You can connect to the access database http://digital.ni.com/public.nsf/allkb/1D5EB4DCBD13106486256B9D005E11B0 you can also get the data and format it and print it with the report generation toolkit, or you could see if Access exposes those functions through an ActiveX server. What functionality exactly are you looking for, and at the end of the day how much time are you willing to develop your own customized microsoft access reporting function?
Richard S -- National Instruments --Applications Engineer -- Data Acquisition with TestStand

While opening a VI the VI is looking for itself - endless loop

A have a VI called "DermaSR". If I open the VI Labview is looking for the included SubVI. And then the following message appears:
"Please find the VI named "DermaSR"
And then I have a problem. I can select DermaSR and nothing happens. Except: The messeage "Please find...
pops up again.
Result: I cannot open the VI. Is all my work lost ???

RanChan wrote:
> Was a good idea. But the permission to read, write and execute the
> file are all set. Seems that this is a real LabView-Bug.
>
> By the way...
> Does everyone know the internal structure of a labview file? Maybe
> that I can use a HEX-Editor to fix the problem (e.g. removing all
> subVIs from the file).
I think there is really nobody who really knows and only a few guys at
NI who could possibly figure it out by looking at your VI and into the
source code for LabVIEW.
More important the exact format changes with each new LabVIEW version
partially.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Looking for a wireless audio from any source`

I have an Apple TV, iPhone 6, and Dell PC. I am shopping for a self-amplified speaker system which can WIRELESSLY stream audio over my home WIFI network (probably not Bluetooth) for BOTH the following:
MUSIC AUDIO, from ITunes, Spotify, apps from iPhone or PC
VIDEO AUDIO, from Apple TV or broadcast TV
Shopping around there seem to be several brands which do one or the other, but it’s not clear to me there is any system that does both. Is that true?
For example, Apple’s AIRPLAY enabled speakers (or normal speakers hardwired to my TV) seem require streaming though Apple TV. Can I also stream Spotify or other apps with AIRPLAY speakers? And NON-AIRPLAY speakers (like SONOS) clearly support most streaming sources, however do they also work with Apple TV for video, and if so without hardwiring the speaker to the TV?
I’m looking for something that does it all, and without complicated workarounds, and with a seamless interface on my device. Wirelessness of the speaker itself—i.e. not hardwired to signal source like SONOS does—would be an added bonus, but not necessary.
Some brands I am looking at: KEF SONOS Bowers & Wilkins Bose
Can you help me, or set me straight if I am wrong about these assumptions?

you should checkout the program called airfoil it let the user stream audio with airplay from any program not just itunes
so that would make spotify be able to play out of airplay speakers be it an Apple TV or airport express with speakers connector or a
device which was build to support airplay

Looking for Suggestions on granting all users access to an application *except a subset of users*

This might not be the right forum for this question, but since it is related to an App-V application I figured I would try since this may have come up for some of you. I am looking for the best way to grant all Domain Users access to an application
except for Domain Admins. Using the Full App-V infrastructure, I want to grant access to the App-V UI via User Targeting, but I don't want to allow Domain Admins access. The reason for this is because when we make updates to provisioned
server cores (stateless), we login with our Admin accounts to make modifications to the cores, and I would like to reduce the steps that need to be taken at the end to ensure that all AppV applications are removed before sealing up the core.
Currently, Domain Admins do not have access to any App-V applications, so this process is fairly clean. All applications are User Targeted.
Packages are cached on a persistent D drive on each server, so the issue is that the registry, programdata, and packageinstallationroot become out of sync if packages are pulled down during core modifications after the core is attached to other servers (hence
other D drives). Because of this, Machine Targeting is not an option for this either.

This would be so much easier with a "Configuration Manager" like feature where you could create a collection query to accomplish the same thing. Are there other tools out there that will do the same thing?

Looking for Dockable Case, What about old Docking Station from ipod?

Hey everyone,
You must know by now that most plastic cases wont let you dock your ipod because the new docking station is too tight. Has anyone tried using the old dock from the video ipod or older and than docking with a plastic case? If so, what's a good case to buy to protect from dropping which would fit in the old docking stations?

I just bought a Speck Toughskin, which I really like. It feels pretty rugged and seems like it would protect the iPod if I dropped it (I'm a klutz). It has a detachable belt clip on the back. I also like the hard screen protector--it has a little rubber rim on the bottom so it doesn't actually touch the screen, which should keep it from getting scratched. My only concern is how well the iPod will dissipate heat while charging, but I figure I can punch a few small holes in the back if it becomes an issue.
The only downsides to this particular case are that you cannot put it in a dock, it does bulk up the iPod a bit, and it completely covers the iPod so it's not the best choice for someone that wants to maintain the standard appearance of their iPod. But for good solid protection, it seems pretty hard to beat (no pun intended).

Edit GUID for Group? ACLs from old server no good

Hi, we're trying to upgrade from an old server running OSX Server 10.4.11 to a new Mac Mini running Lion Server. Our 'hopes & dreams' were to be able to keep everything the same so we could just switch over and keep working with no interuption.
Our needs are pretty basic, with only using 6-8 local user accounts (no network accounts), 2-3 main groups, and mostly file sharing and VPN.
So I tried to setup the users and groups with the same long names, shortnames, passwords and UID/GIDs as our old server. Then for our main old shared files drive, we cloned the entire contents to our new RAID drive using SuperDuper, making sure to check 'retain ACLs'. We were 'hoping' to retain all of the ACLs so we wouldn't have to reapply them to thousands and thousands of files/folders. Even with only a couple groups and not too many ACLs, it would still be a pain.
Unfortunately, when I examing the permissions for files & folders on the new drive, instead of the group short names for the ACE's it is listing a long number which I believe is a GUID?!? (instead of the group name 'sales' it might say 'A4688EB67-6478-AADE-AA97-006545897979' for the User or Group). But the actual ACE's applied are correct, so those did in fact stay intact.
- So am I understanding correctly that setting the same GIDs for the groups was not enough, there was a hidden 'GUID' that I was not aware of that is now out-of-sync?
- If so, is there any way to edit this number for a group so that the ACLs will find the proper groups again?
- If THIS is possible, how would I find the GUIDs for the old groups in Tiger Server so I could port them over???
- Any other options other than resetting all of the ACLs from scratch???
THANKS!

Sorry, was easier than I thought. Just haven't worked on the server in a while.
If it helps anyone for whom this isn't obvious, I exported the users & groups from the Tiger server using Workgroup Manager, then imported them into our Lion Server. This brings all the proper GUIDs with it and now all of our ACLs look correct.
Note to self: somtimes the easy method actually works (with all the differences, I wouldn't have been certain the Tiger users could be imported directly in).

Help - country switching, lost apps from 'old' country

I spend a fair bit of time split between US and UK. I only ever used UK store and UK apps for quite a while, even if I bought an iPad in the US.
I then switched my id to a US store entering my US address and credit card as I wanted to buy some apps which you only get in the US and those that I need in the US. I used the same UK email/itunes/apple ID and just changed address and credit card. This is where my troubles started.
I did get US apps, but.... As a result, now I do not have any of the apps I bought in the UK or access to them! I have all the emails that Apple sends when you buy/download apps as proof of purchase if needed.
I then had to create another id, just for UK as I did. But I don't want to pay again for apps I have already bought!
Hope this makes sense, I have spent a fair amount on both sides of the pond on apps and would like to see them both. I don't mind an intermediate solution where I can split this across two devices (I have an iPad and an iPhone) if need be.
Hope someone can help, happy to answer any questions.. Many thanks in advance!

Hello JustCricket,
It sounds like you have changed the country of your iTunes Store account but now have lost access to the apps purchased in the previous country. This is expected, as apps are country specific, so when you change the country back to the UK from the US you will regain access to those apps.
From: Change the country of your iTunes Store, App Store, iBooks Store, and Mac App Store account
http://support.apple.com/kb/ht6119
After you change the country of your account, you won't see the items you purchased from the previous country’s store in the Purchased section.
Thank you for using Apple Support Communities.
Take care,
Sterling

What is the best method for moving iTune Libraries from Old to New Computer

Hello,
Thanks in advance for any assistance you may offer.
My Sony Vaio Desktop recently died and untimely death, so I just purchased an HP Notebook. I was trying to wait out the release of the possible update of the Macbook line. However the old computer didn't agree. This HP will tie me over till a new release.
I've been doing weekly backups for over 3 years with a backup drive from Western Digital. At this point I just want to transfer my music in iTunes and applications from the App store that are loaded on to my iPod Touch into the new computer and then reauthorize and sync.
My question is what's the best method. Oh another problem I'm having includes the latest iPhone & iPod Touch software problem of 3rd party apps not working along with the vanishing of my music on the Touch.
Any guidance would be much appreciated.

Open up a fresh copy of iTunes. Point iTunes in the direction of your Western Digital Harddrive. Import Folders.
1. New Copy
2. Edit -> Preferences -> Advanced -> General -> Change -> <the address of the iTunes library on WD>
3. File -> Add Folder to Library -> <Select iTunes folder on WD>
Always keep a backup of your iTunes Library file and the iTunes XML Document. If you have those, then it might be just as simple as copying those to your iTunes file folder. If you are not sure where they are, then do a search for iTunes.xml.

Looking for Logoff API functionality from NWA

Hi ,
I have one web application which is deployed on NW 720 system . I have applied security contraint in this web application so when i try access the url pattern it ask user for credentials . But if i close this browser and open a new session then it never ask for user credentials . I guess it takes the user cookie information to re login .
The requirement from my side is to find the API from nwa which can be called during the _jspDestroy functionality so that current user can log off before the broswer is closed . Can you help me here to find that API ?
Best Regards,
Mitul

Hi,
Refer below link if it helps:
http://help.sap.com/saphelp_nw70/Helpdata/en/44/aada5230be5e77e10000000a155369/frameset.htm
Best Regards,
Rupali

Looking for OS to reload on old laptop

I have an old 3 or 4 yr. old laptop, Compaq Presario a900 model, running Premium home vista 32. I want to reload the O.S., but don't have the disks. Where can I get the OS? It was my wife's computer, and she doesn't ever remembering getting the OS disk.
I see the recovery site is here, but no OS:
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3641175&lang=en&cc=us...

Hi,
Here's a couple of options you could try.
1. Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
In the same way that it's possible to create a Windows 7 retail disc, use this to perform the installation and then use the OEM windows 7 activation key from the COA label, the same process is possible if your notebook came with Vista. A full description ( including links to the Vista Image downloads ) of this can be found on the following link.
http://en.community.dell.com/support-forums/software-os/w/microsoft_os/3317.2-3-microsoft-windows-vi...
Additional software and drivers you may require can be found starting Here.
2. Recovery discs may well be available on the site linked to below.
http://www.computersurgeons.com/SearchProducts.aspx?sbt=%20513n%20&bkm=Results#Results
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Looking for the steps to configure remote access to HD connected to airport Extreme via Surfboard modem

I found an article that seemed a little dated outlining steps on how to access files on my exteral hard drive that is connected to my airport extreme. I have enabled personal file sharing, specified the ports and put in the internal IP address. To test, I am connecting to VPN on my ipad, firing up a browser and trying to navigate to the external IP address and port number specified (xxx.xx.xxx.xx:xxxx) I keep getting a page cannot be displayed error. Any suggestions?

Test from a real WAN connection.. not a loop around via vpn. as it is hard to know where the problem is.. is it the vpn or the port forwarding.
Also it is hard to test from ipad as the only effective protocol to use is AFP on 548 and ipad is not able to do it.
Read Tesserax info on remote access.
https://discussions.apple.com/docs/DOC-3413

Looking for a lost loop (from old Access Virus freebie pack?)

Similar Messages

Maybe you are looking for