Looking for a manual for model kbrf57711 wireless keyboard and mouse

asap

Almost any keyboard and mouse will work if it's USB (all of them are now). Just check the box to see if it has the drivers on the disk or not. Most do (mine do).
“Computers have enabled people to make more mistakes faster than almost any invention in history, with the possible exception of tequila and hand guns” - Mitch Ratcliffe
If my answer was helpful, please click the Kudos button so I know =)

Similar Messages

Hi, I bouhgt a used Apple Power Mac G5, I want to buy a blue tooth card for the same to use wireless keyboard and mouse, i am just curious that why do i need to provide the serial number of my computer, is there any compatibilty issue?

Hi, I am new in Apple Computer, I bought a used Power Mac G5. I want to buy a blue tooth card for the same to use wireless keyboard and mouse. so why it is mandatory to provide the serial number of the machine?

Hello, Serial# not needed...
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto *but not including the Serial#*...
Hardware Overview:
Machine Name: Power Mac G5 Quad
Machine Model: PowerMac11,2
CPU Type: PowerPC G5 (1.1)
Number Of CPUs: 4
CPU Speed: 2.5 GHz
L2 Cache (per CPU): 1 MB
Memory: 10 GB
Bus Speed: 1.25 GHz
Boot ROM Version: 5.2.7f1

Is there available for iMac OS X version 10.4.11 700 MHz Power PC G4 a wireless keyboard and mouse combo?

Is there a wireless keyboard and mouse combo anywhere available for iMac OS X version 10.4.11 700 MHz Power PC?

All the keyboards I'm finding require built-in Bluetooth, something G3 iMacs don't have. So you'd need to start with a Bluetooth USB adaptor like this:
http://eshop.macsales.com/item/IOGear/GBU321/
Its specs says it works with Mac OS 10.3.9 or newer. The you should ba able to add a wireless board and/or mouse IF you find one that has support for a Mac OS level older than 10.5 or an Intel processor. Most current boards require 10.5.8, and Intel processor, or both.
The cost for all this could easily be 4-5X the used market value of a G3 iMac so please think this through carefully. A long USB extension cable might be a better option fo such an old computer.

Ultraslim wireless keyboard and mouse not working

Hi , I purchased the Lenovo Ultraslim Wireless Keyboard & Mouse (pn: 57Y4700) about 4 months ago for use with my T60 laptop (which i use with a docking station and large lenovo monitor at work).
Everything was woking fine until last Monday when I can into work after the weekend and neither the mouse or keyboard worked. I replaced the batteries in both, rebooted the machine several time, switch the USB ports for the nano receiver, but nothing seems to have worked.
I looked online for troubleshooting options, but did not find anything.
The mouse and keyboard don't seem to have a "sych" button - if I recall correctly everything worked right out of the box.
My theory is that the nano reciever was damaged (not sure how) -- but don't know how to proceed:
can the nano reciever be replaced;
any other options to troubleshoot;
any chance that this could be a software problem
Thanks

Hi coffee12345,
Welcome to the HP Forums!
I have read your post on your wireless keyboard and mouse not working with your desktop, and I would be happy to help you! To begin, I need to ask you a few introductory questions:
What is the Product and Model Number of your desktop?
What version of Windows are you using?
Is this a recent issue, or has it been like this since day one?
Are you using a USB hub to connect your peripherals or is it directly plugged into the computer?
Please re-post with the necessary information, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

HP KBRF3871 Wireless Keyboard and Mouse Dongle

I need an HP KBRF3871 Wireless Keyboard and Mouse Dong
What is the cost?

Hello @richnaz,
I have read your post on how you are looking to replace the wireless dongle for your mouse and keyboard, and I would be happy to assist you in this matter!
To find out your replacement options, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Windows 8 USB wireless keyboard and mouse?

I have a MacBook Pro 13.3" late 2011 base model running Mac OS X 10.7.4 (Lion). I am planning on installing the Windows 8 Release Preview (64-bit). The requirements state that I need to use a USB keyboard and mouse to get the drivers going once I am in Windows. My question is whether my Microsoft wireless keyboard and mouse, which connect via a USB to my MacBook, will work in Windows 8 with the same functionality so I can run the executable file to download the drivers. Also, as a follow-up question, is Windows 8 Release Preview (64-bit) a safe install for me through Boot Camp?
Thanks in advance,
Rith=Apple4Life

Really? Have you installed Windows 8 onto your Mac because in some videos I have watched, I have seen people not being able to use the built-in keyboard and trackpad until the drivers are installed by using the .exe file. Anyway, for backup, I have secured a wired keyboard and mouse just in case and will be installing Windows 8 soon. It would be nice to download the RTM version, but I wouldn't trust any source other than Microsoft itself.
Thanks,
Rith=Apple4Life

My Mac wireless keyboard and mouse won't reconnect

My Mac wireless keyboard and and mouse one day disconnected and I can't reconnect. They have new batteries.

Hi Saint Anne,
Happy Thanksgiving Day! Since both of your wireless input devices are not working at the moment, do you have a wired mouse you can use to straighten this out? Here are some troubleshooting steps to try:
Wireless Connection issue
Make sure Bluetooth is turned on
First, choose Apple () menu > System Preferences > Bluetooth and confirm that Bluetooth is turned ON.
The Bluetooth menu bar icon should turn:
Black if Bluetooth is turned ON and no devices are connected.
Light grey with three dots if Bluetooth is ON and at least one wireless device is connected.
Light grey (or disappear completely) if Bluetooth is turned OFF, or if the iMac is unable to communicate with the Bluetooth module.
Refer to the Bluetooth Menu Icon table below for more information on determining the Bluetooth status. If the Bluetooth icon does not appear, or if the menu bar status continues to indicate that Bluetooth is off, restart your computer and then attempt to turn Bluetooth ON again.
Bluetooth OFF
Bluetooth ON and connected to wireless device
Bluetooth menu icon
Bluetooth status
Bluetooth turned on, but there are no devices connected to the Mac. See the "Make sure the wireless mouse or keyboard is turned on" section of this article.
Bluetooth turned on and at least one wireless device is connected. See the "Make sure the wireless mouse or keyboard is turned on" section of this article.
When this icon flashes, at least one wireless device has a low battery. Click the Bluetooth icon to identify the affected device, then replace the batteries.
Bluetooth is off. Click the Bluetooth icon using a USB mouse and select "Turn Bluetooth On". Note: Mac OS X won’t allow Bluetooth to be turned off unless a USB mouse is connected.
Bluetooth offline. Restart your Mac. If the Bluetooth status doesn’t change, disconnect all USB devices and restart your Mac again.
Make sure the wireless mouse and keyboard are turned on.
Mouse
Slide the On/Off switch on the bottom of your mouse to turn it on. Note: If the battery compartment cover is not installed properly the On/Off switch may not function correctly or may be difficult to operate. Remove the battery compartment cover and carefully reinstall it.
When your mouse is on and paired, and the batteries are charged, the indicator light glows steadily.
If your mouse isn’t paired with a Mac, the indicator light will blink, indicating your mouse is in discovery mode and ready to pair.
If the indicator light doesn't illuminate, check to make sure you have two good batteries and that they're installed correctly.
Keyboard
Push and release the On/Off switch to turn on the Apple Wireless Keyboard.
When your keyboard is on and paired, and the batteries are charged, the light will glow steadily for several seconds, then turn off.
If your wireless keyboard isn’t paired with your Mac, the indicator light will begin to blink. This indicates your keyboard is in discovery mode and ready to pair with your Mac.
If the LED doesn't light up, remove the batteries to make sure they're good and that they're installed correctly.
Check preferences
From the Apple () menu, choose System Preferences, then choose Bluetooth from the View menu. The Bluetooth preferences pane will list the Bluetooth devices paired with the computer, the status of the devices (paired or connected), and whether Bluetooth power is on or not.
Click the gear icon and choose "Connect" to connect a device that is powered on.
To set up a new device, click the + icon and follow the Bluetooth setup assistant.
If the Mouse System Preferences pane is open and no wired or wireless mouse is connected, your Mac will immediately start looking for a wireless mouse (with Mac OS X v10.6. For Mac OS X v10.5, the Setup Assistant should open).
Keyboard or mouse intermittently stops responding
Click the mouse
Click the mouse once to reconnect it with your Mac. It may take a moment for the mouse to respond.
Check the battery level of the mouse. Choose System Preferences from the Apple (), then choose Mouse from the View menu. The battery level indicator is in the lower-left corner. Replace the batteries if they are low. Note: Choose Keyboard & Mouse from the View menu with Mac OS X v10.5. For more information on keyboard and mouse battery levels in Mac OS X v10.5, see Desktop computers: Troubleshooting wireless keyboard and mouse issues.
Press a key on the keyboard
Press a key on the keyboard to reconnect it with your Mac. It may take a moment for the keyboard to respond.
Check the battery level of the keyboard. Choose System Preferences from the Apple (), then choose Keyboard from the View menu and select the Keyboard tab. The battery level indicator is in the lower-left corner. Replace the batteries if they are low.
Check for signal interference
Wireless networks that operate on 2.4GHz may cause interference.
Move cordless phone base stations, microwave ovens, and other 2.4GHz electrical devices away from the Mac if you suspect interference.
Keep wireless devices within 10 meters (33 feet) of the Mac.
Avoid putting metal objects between the device and the Mac.
Mouse doesn't scroll up or down or side to side
For mice that have a scroll ball, refer to How to clean your Mighty Mouse.
Check the Scrolling speed slide-control at the top, and make sure the “Scroll” checkbox is checked.
For scrolling side-to-side, make sure the application you’re using supports side-to-side scrolling.
Remember, scrolling is done with one finger, and navigating is done by swiping side-to-side with two fingers.
Navigating moves from page to page in a document or internet browser unlike scrolling.
Mouse does not track as expected (jittery, jumpy, slow, fast).
The Apple Wireless Mouse can be used on most smooth surfaces, however if tracking issues occur try these options:
Choose System Preferences from the Apple () menu, then choose Mouse from the View menu. Set the Tracking slider to adjust how fast the pointer moves as you move the mouse.
Try using a different surface to see if the tracking improves.
Turn the mouse over and inspect the sensor window. Use compressed air to gently clean the sensor window if dust or debris is present.
If multiple Bluetooth wireless devices are in use nearby, try turning them off one at a time to see if the issue improves. Bandwidth intensive devices could affect tracking.
Mouse buttons do not work as expected.
The Mouse preference pane allows users to customize the mouse features to meet their needs.
Choose System Preferences from the Apple () menu, then choose Mouse from the View menu. Set the Tracking slider to adjust how fast the pointer moves as you move the mouse.
Try using a different surface to see if the tracking improves.
Turn the mouse over and inspect the sensor window. Use compressed air to gently clean the sensor window if dust or debris is present.
If multiple Bluetooth wireless devices are in use nearby, try turning them off one at a time to see if the issue improves. Bandwidth intensive devices could affect tracking.
Keyboard has one or more keys that do not respond.
Use the Keyboard Viewer to test whether the keyboard keys are responding correctly when they are pressed.
Choose System Preferences from the Apple () menu, then choose Language & Textfrom the View menu (or International from the View menu in Mac OS X v10.5 or earlier).
Select Input Sources.
Select the Keyboard & Character Viewer checkbox.
Enable the input source for the keyboard layout you are testing by selecting the checkbox next to it.
Make sure that "Show Input menu in menu bar" is enabled.
Choose Show Keyboard Viewer from the Input menu in the menu bar, as shown.
The Keyboard Viewer shows the keyboard layout.
Type the key on the keyboard that doesn’t respond and observe whether the corresponding key highlights on the Keyboard Viewer. If it does, that particular key is functioning correctly. In the sample shown above the shift and command keys are being pressed.
If the mouse keys feature in the Universal Access System Preferences pane is enabled, many of the keyboard keys may not respond as expected.
Try starting up into single user mode to determine whether a software issue is causing the issue.
Cheers,
Judy

Can't use Filevault 2 with Wireless Keyboard and Mouse

Am I the only one who can't get File Vault 2 to work with a wireless keyboard and mouse? It seems that the "Recovery Partition" of Lion which you have to log into in order to enable File Vault 2 doesn't support BlueTooth devices so it's impossible to log in and start the encryption process. And after using a USB keyboard to do the encryption, I now can't log onto the encrypted disk for the same reason.
I can't believe that nobody else has noticed this, so what am I doing wrong?
Thanks

I have exactly the same problem; I have an original Apple Wireless keyboard (the older, full-size white and clear plastic keyboard), and a Logitech MX-Revolution mouse, both work just fine using the recovery partition, but don't respond at all for the FileVault login prompt.
The mouse just doesn't do anything, and if others are getting USB devices to work then my mouse should work since it has its own wireless receiver, masquerading as a USB device, but it's just frozen in place. Meanwhile my keyboard appears to connect normally, but the login screen is completely unresponsive, pressing caps-lock doesn't cause the caps-lock button to light up, even though I know the keyboard works just fine.
Considering the push for more wireless by default it seems odd that this problem exists, especially when my devices all work perfectly fine for selecting start-up disk, starting up from CD and so-on. Does anyone have a more concrete fix for this? FileVault 2 was one of the features I was really looking forward to but I can't even properly enable it, I'm just fortunate that Lion at least stops the process if you don't log-in successfully the first time.
As a side note; is the same pre-boot login required if you enable FileVault encryption on a non start-up volume? If not, at what point does the volume become available? I'm hoping to separate my OS and user folders onto my SSD and regular HDs respectively, but if I enable FileVault for my HDs only, will I still need the pre-boot login?

Will the new Apple wireless keyboard and mouse work with my Macbook Pro?

Looking at purchasing a wireless keyboard and mouse for my Macbook Pro. Figured the one made by apple will work, but not sure... Any suggestions on a good wireless keyboard and mouse, or knowledge on whether Apples will work or not?

keyboard: http://eshop.macsales.com/item/Apple/MC184LLANB/
magic mouse: http://eshop.macsales.com/item/Apple/MB829LLABB/
I just got them last week and the keyboard is new and the mouse is used but looks brand new. And you get a free pair of AA bateries with the mouse. And you can get 2AA batteries for the keyboard for an extra $1.29 I highly recommend going this route as I did very recently and am very pleased.

My wireless keyboard and mouse do not work on my All-In-One computer?

Q.: My wireless keyboard and mouse do not work on my All-In-One computer?
A.: If your wireless keyboard and mouse do not work even after changing the batteries, please try re-syncing them by following these steps.
1. Make sure the computer is on, plug in the USB receiver. Push the button on the USB receiver until it flashes blue.
2. While the receiver is still flashing, press the red connect button on the keyboard (Make sure the batteries are installed). The USB receiver should stop flashing after pressing the button on the keyboard. It may take up to 8 seconds to sync.
3. Repeat the same process for the mouse. Push the button on the USB receiver, then press the connect button on the mouse (Make sure the mouse is on).
Note: This applies to all MSI All-In-One computers that include the ES500W wireless keyboard and SW130 mouse.

"This machine has an added 4 USB ports, could this be causing a problem?
It definitely could be the source of the problem. Perhaps the PCI card was bumped loose during shipping?
Have you tried removing the card? That's where I would start.
Keep us posted.

My new mac mini doesn't detect my wireless keyboard and mouse from logitech

I recently bought the Logitech MK550 wireless keyboard and mouse combo for my late 2014 Mac mini. Basic functions work, however, when I try to add the keyboard and mouse in the System Preferences it can't find either one. So right now I have this great big keyboard that I can only use about half it's full functionality and an unassigned button on the mouse. Any ideas? Also, I would like to add an apple remote to my mini. I have one from my old iMac. Is this possible?

Try resetting the SMC.
Question #2 - I have no idea.
Barry

HP KZ256AA Deluxe Wireless Keyboard and Mouse

Hi,
My dongle went missing. Is there anywhere I can get a new dongle?
I'm located in Penang.
Thanks.

If you have part# for Wireless keyboard and Mouse Combo, probably you can check if you can order just the reciever from below website.
http://partsurfer.hp.com/search.aspx
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

MICROSOFT WIRELESS KEYBOARD AND MOUSE

I WAS GIVEN A MICROSOFT WIRELESS KEYBOARD AND MOUSE, WILL IT WORK ON MY PC?

Hi,
Agree with Lewis, the pairs has been done before out of manufacturer.
For Bluetooth connection of wireless keyboard and mouse, we can follow these steps to pair via passkey.
How-to: Keyboards
http://www.microsoft.com/hardware/en-us/help/support/how-to/keyboard/bluetooth
Kate Li
TechNet Community Support

Ultraslim Plus Wireless Keyboard and Mouse not connecting

I just bought the Ultraslim Plus Wireless Keyboard and Mouse, but I can't get either to work. My machine (ThinkPad X230-2324-HQ4) does not have a CD drive for me to use the install CD, so I found and downloaded the driver from your support site:
http://support.lenovo.com/en_US/product-and-parts/detail.page?&LegacyDocID=MIGR-77112
I installed the driver properly and restarted my computer, but neither the keyboard or mouse will connect still. I've checked the batteries, and I've verified that my ThankPad's Bluetooth drivers are up to date and working properly, but I still can't seem to get it to work. I've found posts on here from people with similar issues, but they seem to all be related to the Ultraslim, not the Ultraslim Plus. The Ultraslim Plus does not include a USB dongle for connection.
Please help!

The Ultraslim Plus Wireless Kit is Wireless 2.4G solution, it is not Bluetooth solution. It has a dongle when shipping. Maybe you can check the mouse or Keyboard inside and find the dongle. You can open the mouse battery bin, it should be a dongle at top of two batteries. If you still can not find the dongle, I suggest you call the Lenovo help center since you don't have the dongle.

Does VM Ware Support Apple Wireless Keyboard and Mouse

I downloaded VM Ware from Apple.com. I got to my Windows XP Home login screen, but I could not move the mouse to login to the XP Computer. I had to restart the computer by holding down the power button because I was, "stuck." Does anyone out there know if VMWare is compatible with the wireless keyboard and mouse? I'm using Leopard and Windows XP Home SP 2.
Thanks,
David

Im having the same problem any one have the anwsers for us here?
Message was edited by: kcdude

Looking for a manual for model kbrf57711 wireless keyboard and mouse

Similar Messages

Maybe you are looking for