Looking for a printer/scanner that works with Time Capsule

I recently purchased a Canon MP250 printer/scanner, 1 GB Time Capsule, and two iMac's (21.5 and 27). I connected the printer/scanner to the Time Capsule USB port and it was absolutely trivial to get both iMac's to print to the MP250. My problem is that I can not figure out how to get the scanner to save scanned image files to either iMac.
If I plug the Canon MP250 directly into either iMac, it is trivial to scan. Pressing the SCAN button on the MP250 causes the Image Capture application to launch on the iMac, and then you simply press the Scan button of the Image Capture application.
If it is not possible to scan connecting the Canon MP250 to the Time Capsule, is there another model of printer/scanner that will work as a scanner when connected to the Time Capsule?
Thanks,
Carroll

If it is not possible to scan connecting the Canon MP250 to the Time Capsule, is there another model of printer/scanner that will work as a scanner when connected to the Time Capsule?
The USB port on the Time Capsule will only support compatible printers. It will not support other functions such as copy, fax, scan or maintenance. If you need these services, your only option is to connect the all-in-one directly to a computer.

Similar Messages

Looking for a back up drive for photos and videos that works with time machine, prefer wireless. Time capsule has poor reviews and already have BT hub

Looking for a back up drive for photos and videos that works with time machine, prefer wireless. Time capsule has poor reviews and already have BT hub that serves as a good router. 3gb or 4gb capacity preferred but 2 would suffice.

Plug a NAS into the BT Hub that does TM. Look at Synology.
You just use the wireless of the hub.
But the cheapest solution is still the TC.

I GIVE UP on HP - Recco for new printer/scanner that WORKS?

I have wasted several hours trying to get my brand new HP F4180 All-In-One printer to scan.
I can print, but I can not scan. I have tried installing the software from the disc, and downloaded the new beta software. The beta software always says installed successfully, then reports 0 bytes installed and HP application folder is empty. I have already tried deleting the folder and uninstalling the printer and reinstalling. I have repaired permissions. I have rebooted several times. Nothing ever installs.
I have read the forums and found hundreds of complaints and some people seem to have fixed things but nothing has worked for me.
My time is more valuable than this completely useless printer/scanner. If I didn't need the scanner I wouldn't have bought an all in one.
Can anyone recommend an all in one printer/scanner with a scanner that works out of the box under Leopard. Epson? Anything that I could buy at the Apple Store retail or Best Buy?
Would be great if you could scan while attached to an Airport Extreme under Bonjour, but I am guessing I may need a direct USB connection
If you make a recco and it works, I will promise NEVER to buy anything from HP again. I swear.

I have a Canon PIXMA MP600 that I bought less than a year ago at the apple store. I just tried scanning with it and it appears to work great under Leopard. Note that it's critical to download the latest drivers from Canon (one of which was updated literally yesterday), and not use the software on the CD that comes with the printer.
I've played with HP printers before and it seems like the Canon software is smaller and simpler.
WRT the Airport Extreme, as far as I know you can only print if you have the printer plugged into that, not scan.

Printer does not work with Time capsule

I have a cannon mp960 which up until recently has been hooking up wirelessly to my mac via Time capsule. Yesterday I couldn't print. I was able to print when I directly hooked up the printer to the computer. When I attempt to switch it back it will sometimes find the printer and other times it doesn't. Sometimes it won't let me add the printer (I get an -300 error) other times it works fine.
Could it be a hardware problem?
Any thoughts about this issue?
Thanks,
Keith

I found a solution to this problem. Open AirPort Utility>select the Time Capsule>Manual Setup>Select the "Printers" tab at the top>check the box in front of "Share printers over Ethernet WAN port">click update at the bottom and Voila!!

Looking for a Business Partner that works with Collab Suite

I am currently looking at various "collaboration" solutions on the market today. MS, Lotus, Oracle - in an effort to find the best for my company. The oracle is the only one that offers the Voice/Email integration...which is interesting for me...my question - are there any partners I can talk to that have experience with implementing the suite? I searched the Website and it wasn't obvious to me where to go

Rick,
I'm the Internet Technologies Practice Manager for one of Oracle's Managed Partners.
That means I have Collaboration Suite and iAS product stacks under my practice. Responsible for everything from planning through go-live.
You can email me at [email protected] - send some specifics and a phone #. We'll talk.
Thanks,
Dennis

Is there a printer/scanner that works with MacBook?

I would like to able to scan a document and send with an e-mail.

I have an Hp printer (3050 all-in-one) and my macbook can communicate without any wire with it, so no need for usb pen or whatever, I can scan and get the document automatically on my macbook.

Hi - was looking to buy a macbook air soon but wanted to get it with lion software....anyone know when that is available and second question is what is best software for personal money management that works with lion.....use quicken now thanks

Hi - was looking to buy a macbook air soon but wanted to get it with lion software....anyone know when that is available and second question is what is best software for personal money management that works with lion.....use quicken now thanks

quicken should work with lion.
Quicken Essentials will work with Lion. Most people that have used Quicken for a while (i.e. Quicken 2007) have found that Quicken Essentials isn't much better than a basic spreadsheet. It is a significant step down from previous versions and does not offer many of the features previously offered. Right now, it seems like the two most common options are iBank and MoneyDance.
Frankly... this is a major opportunity for these companies. The largest commercial distributor of this type of product has been Intuit (Quicken). That makes it hard for any other company to get any of that market as so many people were already using Quicken and may have had years of data stored in it. Now, with Quicken effectively out of the picture, it's a great chance for another company. Just imagine if iPhones were suddenly off the market. That would give other manufacturers a tremendous opportunity since they wouldn't have to fight an up hill battle against a market giant.

I have an older HP5550C flatbed scanner that works with 10.5 and 10.6 but not on my new iMac running 10.7

I have an older HP5550C flatbed scanner that works with 10.5 and 10.6 but not on my new iMac running 10.7. Surely there is software that will allow older scanners to work on OS10.7. My MacBook Pro runs 10.6 and the

Although the HP Scanjet shows up in the system profile for the computer it is generic and is not configured (as in screen shot). It also does not show up in the ;ist of pritnters, scanner when I open Image Capture. I can't load the software that came with the printer because it is out of date so that would make it impossible to configure the scanner on the new iMac. see below: Too bad there isn't some generic profile I could load that would cover the 5550c. I have a new all in one printer-fax-scanner but the old one can scann in slides and negatives which I have.

I am looking for a CRM system that integrates with mail chimp or constant contact, hoot suite and forms stack

I am looking for a CRM system that integrates with mail chimp or constant contact, hoot suite and forms stack

Hi,
I could resolve the issue since there were lot of issues after system copy.
1. During distribued to Cenrtal system - system copy.
You need to combine both DB and CI export copies in one folder during which one thing can happen.
SOURCE.PROPERTIES - this file will be there in DB export JAVA folder and also CI export JAVA folder where
DB SOURCE.PROPERTIES file doesn't have an entry of "src.ci.host". This will stop the SAPINST with error and after modifying the file "SOURCE.PROPERTIES" Traget System Copy finishes without any issue.
Then after this stage I encountered an issue with bind hosts entry in config tool which was due to virtual host name usage in my HACMP setup due to whcih JAVA gives a startup problem.
I eliminated this issue also.
After JAVA started I faced an issue with XI related navigations.
ecchangeProfile url still had an entry of Production System. This may be a bug.
After changing that entry, exchangeProfile was downloaded but it had all the source system host entries which were manually changed.
Now I can access all the XI related navigations.
I need to also perfrom SGEN and Profiles import.
Do I need to change any additional settings after this so that my production and DR can work without any issue?
Do you have any additional checks which I can perfrom to ensure my DR systems consistency before I start the log shipping from Production?
Regards,
Rajkumar

Is there a driver for Windows 8.1 that works with HP Scanjet 5500c

Is there a driver for Windows 8.1 that works with HP Scanjet 5500c
Thank you.

Hi,
I afraid you will not be able to use the scanner with Windows 8.1, it is not compatible with the OS.
Regarding VueScan, I afraid it would not be an option as well, the application only support your scanners if there are drivers for the OS:
If there isn't an HP scanner driver at www.hp.com for your operating system, then unfortunately VueScan won't work with this scanner.
You may try using the Vista drivers by running the drivers using the Program Compatibility Troubleshooter as listed below.. select Not Listed from the programs list and browse to the installation file for Vista:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03401961&lc=en#N63
The installation file for Vista can be downloaded below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=sj-47405-1&cc=us&dlc=en&lc=en&...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Scanner that Works with 10.6 Snow Leopard?

Has anyone found a scanner that works with 10.6 Snow Leopard and also handles 35mm negatives & slides? My HP Scanjet 4570c is “dead in water.” HP has said they will not provide a driver update for this model.

If you, like me, are ****** off about how poorly HP is handling/not handling this scanner functionality issue then I suggest that you email the CEO, Chairman, and the Board of Directors of HP. I just finished sending my email to all of them. You can do the same by going to the web site listed below and follow the instructions on that web page. When I sent my messages I typed, "Do you care that HP is losing customers?" in the SUBJECT line of my email. I seriously doubt that this will result a solution to our problems, but at least you can let them know that they have lost another customer.
http://h30261.www3.hp.com/phoenix.zhtml?c=71087&p=irol-govboard

Is there a decent replacement for Mack The Ripper that works with Mavericks?

Is there a decent replacement for Mack The Ripper that works with Mavericks?

But this is not a plugin, it's basically Adobe's Photoshop lite - a standalone program.
The beauty of Intellihance was that is combined a few good native Photoshop adjustments into one menu which meant that you could perform a series of various adjustments and preview them all at once.
Don't want to leave PS to do this if I don't have to.

Anyone have a driver for the ImageClass D860 that works with a Windows 8 64 bit computer?

Please help. If anyone has or knows of a driver for the ImageClass D860 that works with a Windows 8 64 bit computer, please send it or the link to me at [MOD removed email address per FORUM GUIDELINES]. Thx.

I am trying to do a wedding and now spending too much time searching the web for tutorials and reviews to try to figure out what is going on. There needs to be better detailed help.

IPad work with Time Capsule?

DOes the iPad and IPhone work with time capsule?
IS there a way to make the backup automatic like with Time machine?

Welcome to Apple Support Communities
iPhones and iPads work with the Time Capsule, but not to use it to back them up. You can only use the hard drive of your Time Capsule from a PC or Mac, so you can't back them up to the Time Capsule

Recommendations for a Scanner that works with Mac OS 10.6.4

Hi: I bought my first iMac back in February 2010 and have really been enjoying it. However, I would like to know a good scanner to scan mostly pictures. Any recommendations are welcome.
Thanks.

Welcome to Apple Discussions,
Any Scanner that supports TWAIN should work fine. Look for that when reviewing scanners. I have an HP multifunction printer that has a scanner and that works fine for me. Although if you are looking for a photo scanner then there are others perhaps better suited for the task out there.
Here is a nice list of reviews: http://www.macworld.com/products/input_devices/scanners.html

Looking for a printer/scanner that works with Time Capsule

Similar Messages

Maybe you are looking for