Looking for a report as below
Greeting,
newbie in VMWare Chargeback, try coouple times, still can not get what I am looking for I am looking for a report for vCloud Director that just include the following information:
1. Information for ASSIGNED number of vCPUs to VM.
2. Information for ASSIGNED Memory to VM.
3. Information for hours for vm ON vs OFF hours
4. Information for ASSIGNED Storage to VM
5. Information for USED storage to VM.
What I got is 3 of this 5 items are 0
Anyone please give me some hints or direction how to to do that
Thanks
newbie
Dear All,
Good Day,
I have two tables Table_1 and Table_2 in MS Accesss with following structure
Table_1
Attendance_Date Name Time_In
12-Dec-2014 Smith 7:30
12-Dec-2014 Mark 8:00
12-Dec-2014 Rani 7:45
13-Dec-2014 Smith 8:30
13-Dec-2014 Mark 7:00
Table_2
Attendance_Date Name Time_OUT
12-Dec-2014 Smith 5:30
12-Dec-2014 Mark 5:00
13-Dec-2014 Smith 7:30
I am looking for a report as shown below
Attendance_Date Name Time_In Time_Out
12-Dec-2014 Smith 7:30 5:30
12-Dec-2014 Mark 8:00 5:00
12-Dec-2014 Rani 7:45 -
13-Dec-2014 Smith 8:30 7:30
13-Dec-2014 Mark 7:00 -
13-Dec-2014 Rani - -
Anyone's help, really appreciate
Regards
Abdussalam
Similar Messages
-
Looking for a report in LCM(Landed Cost Management)
Dear All,
We are looking for a report in LCM module to print all the unmatched/ partially matched receipt numbers with outstanding balance in accural account.
Does any one have idea on this? or worked on similar reports before?.
Detailed requirement:
There are PO order receipts for which certain costs are estimated viz. Customs Duty, Clearance Chgs. Etc.
Once the receipt is made, the inventory is valued based on the estimates. Subsequently when the actual invoice for the costs i.e. Customs Duty, Clearance Chg. are booked, there could be a variance. This difference in the estimated and actuals gets transferred to inventory provided stock exists.
However if stocks does not exist then the revaluation does not happen. In such cases we need to monitor such balances.Hi Melvin,
You can use the User Data Dump tool. Check out the following post: https://supportforums.cisco.com/message/3403809#3403809
HTH,
Chris -
Looking for a report to get all managed system components
Hi,
We are looking for a report to get the support pack level of managed system.
We can get that by going individually on each system entry in SMSY. Is there a standard report or a transaction in solution managed that can list the support pack level of all managed systems ?
Thansk you for your help.
ChakHi,
Another option you have -- provided that you are running EarlyWatch Reports on all of your systems -- would be to create a single Service Level Report.
You would create a variant that includes all of your systems under the Select for Reporting column. Then under the Content from Solution Manager tab select the System Configuration --> Select for Reporting box.
This System Configuration report will provide you will the hardware info (OS version, CPU, memory), database version, SAP software components/version, and the SAP kernel.
The SLR allows you to extract and aggregate segments of your EWAs into a single report.
Good luck.
Bill -
I am looking for following report
Dear Expert ,
I am looking for following report , please let me know the T codes for follo reports :
a) Assembly Log book Entry
b) Assembly Log book approval
c) Machine log book entry
d) Machine Log book approval
e) Monthly attendance
f) Monthly progress
g) Monthly opening balance Entry
h) Recalculation of Index
Reports
b) Daily log book Report
c) Incentive Details
d) Incentive Summary
Points will be rewarded .
Neal
Edited by: Neal Gibson on Oct 23, 2008 11:53 AMThanks for your reply . I know SAP1 and SAP2 but I am not HR guy . I just wanted to know th T codes from where I can get those reports .
-
Looking for Crystal Reports for . net framework 2.0 (x86) in MSI Format..
Wasn't sure which version you are using, so here are the two i think you might be using:
[CR for VS2005|https://smpdl.sap-ag.de/~sapidp/012002523100010010692008E/crredist2005_sp1_x86.zip]
[CR for VS2008|https://smpdl.sap-ag.de/~sapidp/012002523100006255282008E/CRRedist2008_x86.zip] -
I am looking for Crystal reports arleady designed.
I am looking for Crystal reports already designed. Does anyone know where I could fine them?
Navin,
Thanks for the reply, I have another question you might be able to answer.
I have a picture field (blob field) on the same line as our Product ID field (regular data field) and i want the report to show the picture that goes with that Product ID. 50% of our products dont have pictures, so when I print the report, it currently prints large empty spaces for the Products that dont have pictures and makes the report quite long and unattractive.
I have tried to supress the field and also put the field in its own section and use a formula for supressing if the data is blank, but I get the error message that says "Can not use a BLOB field in a formula".
I need to find a way around this. Can you, or any of your experts help?
I could send you the report with some data in it if that would help.
Thanks again!
JM -
I am looking for 2 reports:
1. A report to tie the AA subledger to the General Ledger. In our company, we have several scenarios in which we post retirements/acquisitions with value dates in the past months and post it in the current period (which is open). This causes the balance on the subledger to change as of that value date, which is fine. However I cannot find a standard report to tie the balance to the sub-ledger. The report date on the standard report seems to pick up transactions in the subledger even if they have a future posting date. e.g. Report date 3/31 would pick up transactions that were posted with a value date of 3/15 but a posting date of 8/31. I need a report where I can pull balances by the Posting Date. The auditors need this to ensure that the sub-ledger and G/L are in sync. I am sure this is not an exceptional requirement. Can any one tell me how they handle this?
2. I need a depreciation comparison report where I can compare depreciations of each period in a year side by side. Something that would have all the 12 periods and the total depreciation for say an asset class.
ThanksThanks for the response once again. I already know about ABST2 but the auditors want detailed reports. ABST2 just gives you the differences. Now as for the Asset Balances and the FS10N, thats where the whole issue starts. The auditors come in every 4 months and they look at the sub-ledger and G/L for those months to try and tie it out. Here the reason why we have an issue.
Example: Say the FA balance was 1000000 as of 3/31 and it tied to the G/L as of 3/31. On 9/15 I post an entry to acquire an asset for 30000 with a value date of 3/20. The result is that if you run the asset balances report as of 3/31, it would show a balance of 1030000 and also an increase in the planned accum. However if you run the FS10N and look at the cumulative balance at the end of March, it would be still 1000000 since the 30000 was posted to the G/L in september and not march. When the auditors look at these 2 reports, they think that sub-ledger and G/L does not reconcile. I tried to explain the reason and they understood. However, they need a report to see it. -
I am looking for Transaction Codes or Path to get these reports
1 List of customer returns
2 List of goods receipts
3 List of Post Goods Issues
4 List of goods shipped
5 List of adjustment made to inventory by date/person. (Document it)
6 Inventory aging report
Thank you very much for help in advanceHi Ashish,
MC+A SIS: Customer Returns, Selection
VL01N Customer Returns
VL02N Customer Returns
VL03N Customer Returns
MCP6 Goods Receipts
MB1A Goods issue
MIGO_GI Goods Issue (MIGO)
COWBHUWA Goods Issue for Work Order
MB90 Goods Issue Messages
VLLA Picking/Goods Issue
VL06G Goods Issue - Delivery
COGI Goods Issues
VLLA RWE: Picking/Goods Issue Analysis
VL06G Deliveries for Goods Issue
VL23 Goods Issue (Background)
Small Suggestion, use the tcode search_sap_menu to look for any tcode or report!
Hope it helps,
Thanks
Janani
award points if helpful -
Hi All
Hope u are doing well
I was looking a simple report which gives me celar picture of the stages
Sales oder no, Invoice numberNo, if on production production ordernumber due date of production order and po invoived to get the production done and trceiving date of POs for the same
Kindly revert with the best possible option
Have a nice day
Kind regards,Dear Mona,
The requirement you have putted on your report is very much complex.As per your scenario this one is only possible when you guys are following the base document otherwise this report is not possible
Regards,
Kumar -
I am looking for Transaction Codes or Path to get these reports
1 List of customer returns
2 List of goods receipts
3 List of Post Goods Issues
4 List of goods shipped
5 List of adjustment made to inventory by date/person. (Document it)
6 Inventory aging report
Thank you very much for help in advanceHello Ashish,
His all are transactions identified by mvt type so you can use MB51 to get the information or alternatively you can use MSEG table.
Inventory aging report : you can explore MC.9 here you will get last mvt date, last GR date, Last GI date so it's upto business how you want to consider it for AGING.
Also, you can use transaction code SAP1 to get all report menu, please explore your area to find the relevent report.
Regards
Arif Mansuri -
Looking for information on the below questions on ASM
Scenario: (Oracle 10g on Windows 2003 with EMC storage)
ASM Partition table crashed for LUN 20 on 18th July
DB was up and running till 23rd July (New LUN (LUN 36) was presented and the RMAN backup used to restore the data that were residing on the corrupt LUN)
End of the day everything screwed up and the complete grid (4 nodes) was rebuild.
Links:
As mentioned in the link: http://www.exforsys.com/forum/oracle-database/487-what-asm-instance-oracle.html
"The ASM instance is only involved during the creation or deletion of files and when disk configurations change (such as dropping or adding a disk). When these types
of changes occur, the ASM instance automatically rebalanced the disks and provides the necessary information to refresh the extent map in the SGA of the database
instance. Of course, this process requires that the ASM instance run concurrently with the database instance, and only shut down after the database instance is
closed."
As mentioned in the link: http://www.orafaq.com/wiki/ASM_FAQ#ASM_disk_header.2Fsuperblock_backups.3F
"ASM disk headers (super-blocks) cannot be backed up and restored in Oracle 10g. By implication, if you use EXTERNAL REDUNDANCY and a single disk's header is
accidentally overwritten, the entire disk group will have to be restored."
As mentioned in the link: http://www.datadisk.co.uk/html_docs/oracle/asm.htm
"ASM is a special instance that does not have any data files, there is only ASM instance one per server which manages all ASM files for each database. The instance
looks after the disk groups and allows access to the ASM files. Databases access the files directly but uses the ASM instance to locate them. If the ASM instance is
shutdown then the database will either be automatically shutdown or crash. "
With the above scenario and the documents provided in the links above, I am unable to get the complete picture of what went wrong. Will be great if some one could
through more light on the below questions. (Note: we have multiple vendor engaged managing different part of this outage and unable to get the real fact of what went
wrong)
1, The ASM had given the details of the disk to the DB, and the DB is managing the disk directly. Also the DB and the ASM instance were up and running till 23rd is
what i understand going by the details given in the above links, in this scenario how can we confirm that the partition table is corrupt / missing. Is their a way to
check the same?
2, ASM disk headers (super-blocks) cannot be backed up, that means that it can not be read directly. Then is it possible to say that the ASM disk header is corrupt /
missing?
3, If the ASM disk header / partition table of LUN 20 is corrupt on 18th, can the DB run till 23rd without any issue? will the ASM & DB does not crash?
4, ASM will strip the data across the available LUN's, will it not be able to rebuild the data on the newly presented LUN 36 instead of using RMAN backup to rebuild the
data? or is the ASM not configured as it should be done. (WE have multiple LUN's presented to this Grid)
Edited by: 880333 on Aug 19, 2011 12:35 AMWhat relation with the Oracle Forms product ?
Francois -
Looking for a report to force the option "after aggregation"...
Hi guys!
I read everywhere that the option "before aggregation" isn't available under BI7.0. I wonder if there's a way to force "aggregation after" for all my objects. Like a report, a function...or do I have to set the option on every object in the Bex query designer?
Does this kind of thing exist on BI7.0?
Best regards,
Julien DERIOTHi,
You have to set option on Every Object.
Assign points if it helps.
Regards,
sandeep -
Looking for a notebook with below specs.
Highly Recommended:
OS: Windows 7 32-bit/64-bit
CPU: Pentium D or newer (or equivalent such as AMD Athlon 64 X2 or newer) with optional multithreading or hyperthreading capabilities.
RAM: 2048MB required for working with multi-million-polys. 6 GB recommended.
Pen Tablet: Wacom or Wacom compatible.
Monitor:1280x1024 monitor resolution or higher (32 bits)
Minimum System Requirements:
OS: Windows Vista, or newer, 32-bits or 64-bits.
CPU: P4 or AMD Opteron or Athlon64 Processor (Must have SSE2 : Streaming SIMD Extensions 2)
RAM: 1024MB (2048 MB recommended)
Pen Tablet: Wacom or Wacom compatible.
Monitor: 1280x1024 monitor resolution (32 bits)You might try contacting HP as I am certain they may be better able to tailor a unit to your needs.
Just reviewing the site, the following unit was the only one I found on the consumer site with a touchscreen. The unit does not quite reach the resolution requirement listed, but it will work with an external monitor that does have that resolution should you want to use it that way.
http://goo.gl/oZjjl
I have done a quick search at the business side, but didn't really find anything that met all the options. I recommend contacting HP to have a more tailored solution.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
Looking for Crystal Reports Server XI R2 SP4 on Windows
The file on the SAP/BusinessObjects downloads fails with an error. Where else can I get this service pack?
Also is this the latest service pack available for CRS XI R2 on Windows?
Regards
LawrenceBala:
Please post the url to the download site.
Business Objects downloads only has SP4 and SP2 for Linux
Thanks
Lawrence -
Looking for a report on user mailbox size in Unity Connection 8.5.1
Cannot find a report that shows mail box size so that we can identify users approaching limit.
The canned reports don't have mailbox size. Thanks in advance. MelHi Melvin,
You can use the User Data Dump tool. Check out the following post: https://supportforums.cisco.com/message/3403809#3403809
HTH,
Chris
Maybe you are looking for
-
How can I get word files from my laptop to my iphone3GS
I am a new user and would appreciate any guidance please. Are there any apps that I can use that will allow me to use a hard connection to my laptop or even wireless to my laptop that will allow me to upload and download word and excel files and read
-
NO Adapter Engine found in SXMB_MONI
Hello Experts, We have a scenario where we are sending contracts from ECC system to XI and XI send this information to the Seeburger System. We have all these systems in palce. But on trying to process a message i.e generate contarcts from ECC the me
-
Can't change RUS in interop environment Exchange 2003/Exchange 2010
Hello! We have interop environment with Exchange 2003 and Exchange 2010 Servers. We have many Exchange 2010 servers, and not so many days ago had a lot of exchange 2003 servers. So we moved all mailboxes from Exchange 2003 servers and started to remo
-
I dowloaded that new OS and now iPhoto doesn't open. Help!
I dowloaded that new OS and now iPhoto doesn't open. Help!
-
Reset and Reverse the partial payment/receipts
Dear Friends kindly advise me how to reset and reverse the partial payemnt/receipts Thanks Regards Madhu