Looking for a second display
Hi again. I'm looking for a screen to go with my 21.5 Inch iMac. This would be mainly used for gaming with my Xbox 360 however I would use it with my Mac as well. It also needs to be height adjustable so that I can align it perfectly with my Mac.
So I'm looking for a 21.5 inch height adjustable gaming monitor, that's under £200. It needs to have a 1ms response time and generally have good specs for gaming.
Help would be greatly appreciated! :)
check out dell, asus and acer they all got various models that will work
Similar Messages
-
Msi big bang xpower2 - only boots for 10 seconds, displays error b7
Hey guys,
As the title states. I am getting 'b7' on the error display which i read somewhere means 'no input devices detected', can someone confirm this? I have tried turning on the PC with 1 GPU, 2 GPU, and no GPU in different configurations but I get the same error each time. It just boots for 10 seconds, displays 'b7' and then restarts and does it all over again. Help would be massively appreciated as I need this PC for work :(
ThanksMore than likely it's 67 - Late CPU Initialization
Just providing the name of your MB is not enough info. Please supply information for rest of your system, not knowing what kind of RAM, model CPU and other components mates it very difficult to help track down cause your problem.
See my signature below for example of info to provide.
>> Posting Guide << -
I have an AOC brand monitor and the proper DVI connections to add it as a second display, however it doesn't work as plug and play and the AOC website only has windows drivers and says to contact Apple tech support for an appropriate plug and play driver. Where can I find a driver for this?
You should not need any drivers, unless it is some specialized monitor that does more than a normal DVI display (such as touch screen or 3D).
What is the native resolution? An iMac can go up to 1920x1200 pixels for an external display that is DVI (which is a typical 23" or 24" widescreen display). Larger displays (higher resolution) will not work. -
Looking for a second hand iMac - any tips please?
Hi All
Due to work I have primarily been to the dark side in the last few years, with just a Mk 1 Mac Mini for my photos and videos. Its almost crawling now, so its time for an iMac I think.
I don't want anything too crazy, but I wasn't sure what amount of RAM would be good to run Snow Leopard? I wouldn't be doing any crazy photoshop stuff, maybe a bit of HD stuff in iMovie plus the usual iTunes & iPhoto usage, but I have no idea how much Snow Leopard really needs to run smooth with a few apps open.
I run an online business and in the end I switched back to PC as I've always found Macs to be pretty slow for browsing, I'm guessing thats probably changed now?
Anyway, any help or advice would be great. I'm probably gonna look for second hand so any suggestions (eBay UK etc) would be great!
Many thanks
MarkI'd really suggest just looking at Apple's refurb selection. Couple hundred off the top, same warranty, and you know you're going to be getting something of quality. Buy off a place like ebay, you never know what you're going to end up with. There are probably a lot of honest sellers on ebay, but it just takes one not so honest person to really ruin things for you.
And Snow Leopard actually runs pretty well on 2GB of RAM. Runs reasonably well on only 1GB actually, but 2GB gets into the fabled "butter zone". I'd suggest probably 3-4GB if you're going to be doing any kind of video editing.
So any 2009 21.5" iMac should fit the bill nicely for you. -
Looking for Fm which display Blocked status
Hi ,
I was looking for a function module which displays the blocked status in GTS system, i know one '/SAPSLL/CD_STATUS_GET' which exist ECC system, but i am looking for which is in GTS system.
Could you plz help me out with this issue.Hi Ashok
To answer your question some more context would be useful. What inputs do you have to identify the document? The reference document -OR- GTS customs document? There are lots of standard function modules available such as /SAPSLL/CUHDSTA_DB_SGL_READ which provides the customs document header statuses for SPL, License and Embargo checks from the document header status table directly. The inputs for this would be the GUID from table CUHD.
The function module used when ECC calls GTS using /SAPSLL/CD_STATUS_GET is /SAPSLL/API_6800_STATUS_GET, this is another possibility.
Hope that helps.
Rachael -
Looking for App that displays more Battery info?
Hello
I looking for an App wo gives me indication if the battery is in good health. This means gives me the actual battery capacity versus the original capacity. Every PowerBook and MacBook gives this info in the System Profiles or with Coconut
eg.
Model Information:
Serial Number: 9G019049ABCDF
Manufacturer: DP
Device name: bq20z951
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0301
Hardware Revision: 0001
Cell Revision: 0119
Charge Information:
Charge remaining (mAh): 12404
Fully charged: No
Charging: No
Full charge capacity (mAh): 13093
Health Information:
Cycle count: 13
Condition: Normal
Battery Installed: Yes
Amperage (mA): -3
Voltage (mV): 8235
Is their such an App or is it not possible to read out this information out of the iPhone?
Who knows more?
GérardI recently purchased the mSecure app for the same purpose but cannot get it to sync with the desktop version via wifi as it is supposed to do. Support response from mSecure has been good but still no luck syncing. All of these types of apps require syncing via wi-fi but not much good if it doesn't work. I've tried all of the suggested work-arounds to no avail. Any suggestions would be welcome. I'm trying to sync to a Windows laptop. I'm reluctant to use the same type of apps that back up to an online storage site for security purposes.
-
Im looking for a good display profile
Hi. Im wondering if anyone has a really nice display profile (.icc) for the Macbook Pro 13 (circa early 2011) with the 9CC5 screen (by LG). Its not like the default is a bad profile, but ive seen my dads macbook pro 13 with the Samsung screen (mines LG) and his just seems to look a little better somehow. Any comments or tips are welcome. Thank you.
If you don't want to buy a screen colorimeter (and I wouldn't blame you - mine was $250) to calibrate your screen, just create your own, personal profile. Just go to System Preferences>Display>Color tab and select "Calibrate" - you can then calibrate your monitor to your personal preferences. It might not look exactly like your Dad's but that's the best way to get it 'close'.
Good luck,
Clinton -
Looking for a replacement display assembly
My wife's 12" powerbook slid off a desk and the lcd cracked (the screen casing was damaged too). Does anyone know of a good source for a display assembly to replace it? I have a search saved on ebay and posted an inquiry on Craig's List.
Hi, Matthew. Bad luck! Try these Powerbook parts vendors:
http://www.pbparts.com (parts and repair work)
http://www.dttservice.com (parts and repair work)
http://www.powerbookresq.com (parts and repair work)
http://www.powerbookmedic.com (parts and repair work)
http://www.tekserve.com (parts and repair work)
http://www.welovemacs.com (parts and used equipment)
http://www.ifixit.com (parts and excellent, illustrated online take-apart instructions)
Prices for the same parts vary WIDELY, so check around. -
Looking For Method Of Displaying Drill-Down Subreport Data On Same Page
Not sure what the technical term for this is, but I need to find a way to display dynamic drill-down sub-report data within a report. Here is an example of what I am trying to accomplish:
+ DATA SUMMARY 1
+ DATA SUMMARY 1
- DATA SUMMARY 1
data detail 11
data detail 12
- DATA SUMMARY 2
data detail 2
data detail 2
The idea is you click on the + (plus sign) and the subreport detail unfolds below the summary row. To close the sub-report data, you click on the - (minus sign). Right now, the report pops up the sub-report data in a separate tab, which is not what the client wants.
Fuskie
Who doesn't know if this is a function of report design or of viewer manipulation of report data...I think this is called In Place Drill Down.
Fuskie
Who appreciates y'alls help.... -
Looking for SQL to Display Rows as Columns in a View
Hi!
I am using Oracle 10g (10.1.0.4.0) 64 bit on Red Hat Enterprise Linux AS release 3.
I have the following tables:
Table A
A_ID number (primary key)
Table B
B_ID number (primary key)
B_NAME varchar2
B_DESC varchar2
Table C
C_ID number (primary key)
B_ID number (foreign key to table B)
A_ID number (foreign key to table A)
ORDERING number
A row in table A can have from 0 (zero) to 3 (three) rows in table C associated with it.
I am trying to make a view that displays A.A_ID and its associated rows from table C as a single row. For example, the following query:
select A.A_ID, C.B_ID, B.B_NAME, B.B_DESC, C.ORDERING
from C, B, A
where C.A_ID = A.A_ID
and C.B_ID = B.B_IDYields the following results:
A_ID B_ID B_NAME B_DESC ORDERING
100 10 A One 1
100 20 B Two 2
100 30 C Three 3I would like to get the following:
A_ID B_NAME_1 B_NAME_2 B_NAME_3
100 A B CThanks (in advance :-),
Avi.SQL> CREATE TABLE dt_test_a(a_id number)
2 /
Table created.
SQL> CREATE TABLE dt_test_b(b_id number, b_name varchar2(1),b_desc varchar2(10))
2 /
Table created.
SQL> CREATE TABLE dt_test_c(c_id number, b_id number, a_id number, ordering number)
2 /
Table created.
SQL>
SQL> insert into dt_test_a values(100)
2 /
1 row created.
SQL> insert into dt_test_b values(10, 'A','One')
2 /
1 row created.
SQL> insert into dt_test_b values(20, 'B','Two')
2 /
1 row created.
SQL> insert into dt_test_b values(30, 'C','Three')
2 /
1 row created.
SQL> insert into dt_test_c values(1, 10, 100, 1)
2 /
1 row created.
SQL> insert into dt_test_c values(2, 20, 100, 2)
2 /
1 row created.
SQL> insert into dt_test_c values(3, 30, 100, 3)
2 /
1 row created.
SQL>
SQL> SELECT
2 a.a_id,
3 DECODE(c.ordering, 1, b.b_name) b_name_1,
4 DECODE(c.ordering, 2, b.b_name) b_name_2,
5 DECODE(c.ordering, 3, b.b_name) b_name_3
6 FROM
7 dt_test_a a,
8 dt_test_b b,
9 dt_test_c c
10 WHERE
11 a.a_id = c.a_id
12 AND
13 b.b_id = c.b_id
14 /
A_ID B B B
100 A
100 B
100 C
SQL>
SQL> SELECT
2 a.a_id,
3 MAX(DECODE(c.ordering, 1, b.b_name)) b_name_1,
4 MAX(DECODE(c.ordering, 2, b.b_name)) b_name_2,
5 MAX(DECODE(c.ordering, 3, b.b_name)) b_name_3
6 FROM
7 dt_test_a a,
8 dt_test_b b,
9 dt_test_c c
10 WHERE
11 a.a_id = c.a_id
12 AND
13 b.b_id = c.b_id
14 GROUP BY
15 a.a_id
16 /
A_ID B B B
100 A B C
SQL>
SQL>
SQL> insert into dt_test_a values(200)
2 /
1 row created.
SQL> insert into dt_test_b values(40, 'A','One')
2 /
1 row created.
SQL> insert into dt_test_b values(50, 'B','Two')
2 /
1 row created.
SQL> insert into dt_test_b values(60, 'C','Three')
2 /
1 row created.
SQL> insert into dt_test_c values(4, 40, 200, 3)
2 /
1 row created.
SQL> insert into dt_test_c values(5, 50, 200, 2)
2 /
1 row created.
SQL> insert into dt_test_c values(6, 60, 200, 1)
2 /
1 row created.
SQL>
SQL> SELECT
2 a.a_id,
3 MAX(DECODE(c.ordering, 1, b.b_name)) b_name_1,
4 MAX(DECODE(c.ordering, 2, b.b_name)) b_name_2,
5 MAX(DECODE(c.ordering, 3, b.b_name)) b_name_3
6 FROM
7 dt_test_a a,
8 dt_test_b b,
9 dt_test_c c
10 WHERE
11 a.a_id = c.a_id
12 AND
13 b.b_id = c.b_id
14 GROUP BY
15 a.a_id
16 /
A_ID B B B
100 A B C
200 C B A -
Looking for a JPEG display App with specific features
Is there an Apple iPad app that can display large (15MB to 25MB) JPEGs, with pinch to zoom in 100%, the ability to display full 1920x1080 via AirPlay to an Apple TV, AND... show a list of these JPEGs by filename and not just thumbnails?
Most cloud music players will only access their cloud folders, not
an indépendant FTP folder.
I did find one that kinda works - DeadOn Player.
but it's buggy and crashing. -
What to look for when purchasing external display
Hey everyone,
First and foremost I want to say I am a web developer and graphic designer so what I am looking for is a display (not too big) 20" - 23" TV OR Monitor. This way when I am developing I am not making things HUGE so i can see them while other viewers can't. I have seen the display on a 30" screen and no that isn't going ot work.
I am now searching for an external display for my newly built office but I don't know what to look for besides DVI support. What resolution do I need to make sure it goes to? There is just so many options when looking at TVs or Monitors..
any input?DVI support is a must and most LCDs in the size that you are looking for are going to have it.
Your MB can drive a display with a resolution of up to 1920 x 1200 which just happens to be the resolution of the 23" Apple Cinema HD Display. I didn't want to pay Apple prices for a display, so I went looking at Dell. I picked up a 20" 2007WFP display from them for about $360 shipped and it works like a charm with the Apple Mini-DVI to DVI adapter.
I prefer displays that use a S-IPS panel over the more common and cheaper TN panels. S-IPS is much better for color reproduction and that is why Apple uses them in their Cinema Displays. Dell uses the same panel is some of their 20" models - I got one - but some buyers are very upset that they got a TN panel instead of the S-IPS panel. I was lucky I guess. -
Using minni DVI plug for second display
If I use my minni DVI output on my Imac for a second display, can I set the second display to a different resolution and use both displays at the same time.
When you set up the second monitor system preferences will pop up in the second monitor and you can try several different settings.
I connected my Samsung SyncMaster 192N to the mini dvi port and it works fine but it doesn't seem as bright as when I had it connected to my Windows PC. I use it to run Windows XP in VMWare Fusion. That way I can run it full screen but still have a full screen for OSX. -
Looking for 27" monitor or larger under $350
Looking for (2) 27" monitor or larger under $350 each. It will be a dual monitor for a new build. Used mostly for PP cs 5.5 Win 7, 64 bit
1920/1080 of course.
Video card will be:
ASUS ENGTX480/2DI/1536MD5 GeForce GTX 480 (Fermi) 1536MB 384-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card
Model #:ENGTX480/2DI/1536MD5
Item #:N82E16814121373
http://www.newegg.com/Product/Product.aspx?Item=N82E16814121373
What monitors can you recommend?Ouf! A 27" monitor at that price? I hope it's just for your workspace and not to monitor and color corect your footage. If you're only looking for a 1920x1080 display, there are tones. I can't vouch for them, as I'd never get a 1920x1080 that is more then 24". But for 2560x1440 and up, they usually start at more then $800. If your looking for 1920x1080, you'd better get a great quality 24" IPS at that price.
But it all depends on what you want to do. -
"Reader" will only display a PDF for one second, then suts down the PDF.
I recently had an automatic update to "Reader" and now "Reader" will only display a PDF for about one second, then shuts down the PDF. This happens to all PDFs no matter what the scource. I am running Windows 7. What do I need to do to correct the situation. (Yes -- I deleted "Reader" from my computer, the re-installed it. Didn't help.)
Go to C/Programs/Adobe/Reader 11/Reader.
Look for a file named eula.exe (or just eula).
Double click it.
Accept the license agreement.
Reader should work fine from there.
Maybe you are looking for
-
Incorrect field KNA1-STCEG in output list for input tax Line items-RFUMSV00
Hi all, I found the incorrect field in RFUMSV00 - Advance Return for Tax on Sales/Purchases. If you want to configure the output list for Input tax: Line items, there is the field VAT Registration No. which has to be LFA1-STCEG, but there is incorrec
-
Hi Experts, When I execute my report created in Query Designer, it shows '#' for all the blank or null values. Is there any setting in the query properties that we can change this ? Thanks
-
Wondering if anyone (everyone?) else experiences this. If I do a timed workout (say, 45 minutes), the voice correctly gives me progress updates (every 5 minutes and half-way through), but there's nothing at the end of the workout. I would have expect
-
I have an audio book that is jumbled. I purchased it legitimately on iTunes, but in my wifes account. I am authorized to play it, but when I switched from my old mac to my new one it is jumbled now. I bought the book originally on my old Mac with her
-
Live migration of domains with OVMM
Can anybody point out the reference for performing live migration of domains through OVM Manager instead of CLI. Could not find it in the User's manual for OVM Server 2.2 release.