Looking for a server connection and hangs when I take my air home
Everytime I open motion on my new Air it seeks a server connection and then comes back with "can't find 10.10.1.101". It then hangs again for a few minutes with the same message. It tries a third time again with the same message and then gives up and allows me to work unimpeded.
I trashed prefs and can't find anyway else to un-make this desire to attach itself to my work server. Any ideas out there?
The easiest and best way is using 1) - change the SMTP server used for your work email account when at home.
I assume you must use the SMTP server for your work account to send messages with your personal account when at work?
There is a collection of AppleScripts available called Mail Scripts you can download at this link.
http://homepage.mac.com/aamann/Mail_Scripts.html
The script you want to use from the collection of scripts is Change SMTP Server (Mail) to switch between different already defined SMTP servers or define a new one. This is especially useful if you are using your computer in more than one location and have to switch servers for several accounts at once.
Thunderbird includes a setting for changing the default SMTP server used for all accounts but this must be selected/changed by location which is not much or any different.
Similar Messages
-
I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get these things working. I know that I have to identify my camera through the DHCP table and set up port forwarding and there is the problem.
My network consists of 4 base stations set up in a roaming network - same network name and passwords. I need to do it this way so I don't have to switch network when I move from one side of the house to the other, go to the cabana, or my shop in the barn. The network works pretty well since I went to a roaming set up. Good performance, yata, yata, yata.
However, the roaming network requires the AEBS's to be set up in bridge mode, rather than sharing an ip address. When the AEBS is set to bridge mode, you don't see a DCHP table or have the ability to identify your IP Cam through the AEBS - and hence, no port forwarding.
I am able to identify and set up my Linksys IP Cam by locating the ip address on my FIOS router, even though, it's plugged into an AEBS. I set it up, see the video, remove the ethernet cable from the IP Cam, restart - and I can't get to it from an AEBS. In researching this, it appears, I should be setting up the AEBS to "share an IP Address", going to the DHCP table and identifying the camera's IP address and setting up port forwarding. However, you don't see any of the DHCP or port forwarding options in Airport Network Utility when configuring in bridge mode.
I'm hoping I'm missing something here and that the solution isn't to set it up at the FIOS router level, but I'm beginning to think that's my only hope. What concerns me there is that I should be able to see the IP cam on the network without port forwarding since I'm not coming from outside, and I can't even do this unless it's connected hard wire.
I'd appreciate any insight into this that anyone might have. I've hit the wall with what I know.
Thanks.In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first. -
A year ago I brought a 1 TB hard drive (My Passport), I have not used it for over 4 months and now when I use the USB cord to connect it to my mac, it does not register the hard drive. Does anyone know why this is happening?
The beeps could be caused by something as simple as a loose internal wire or connection. If it is under warranty (not sure how long that is, as WD drives range from 1 to 5 years depending on the model's series - I think "my passport" drives are 3 years) you could contact WD and ask them about it.
If it is out of warranty, you could also try opening the case and check the connections - the drive may be fine, and there have been posts on TomsHardware forums of people getting the beeps, opening up the case and the drive is fine, just some wire worked loose. -
Developer Server 6.0 hanging when launched from Netscape 4.6
Hi, simple question to ask about OAS and Developer Server.
My Developer Server 6.0 hanging when launched from Netscape 4.61,
I am currently running...
Pentium PII 200Mz running NT sp5
Forms Server version 6.0.5.31.0 (Patch 3 applied)
OAS version 4.0.7.1.0 (Patch applied)
Jinitiator 1.1.7.18
Netscape 4.61 browser
I have all the latest versions of everything that is available,
I have followed the instructions.
I successfully connect to the OAS admin utility and have setup
all the virtual to physical directory mappings under the default
listener www. I successfully start all website OAS services.
I have Forms server successfully started up as a process
listening on port 9000.
I have two statics html files created:
a) with Jinititator 1.1.7.18
The very first time I connected to this static html file it
installed Jinitiator as expected. The Forms server splashscreen
then appears.
Jinitiator then starts up successfully, no errors appear in the
Java console. This has proved I am talking to the listener and
my virtual directory mappings are working.
At this point there is a lot of disk activity and then all
stops, the splashscreen remains and appears in the discussion
area:
FRM-9999 cannot access "koala.ilaco.gov.bo:9000" and
a series of java exceptions
I am pointing to the correct java directories (I think)
b) with out Jinitiator
When I try to call using URL with Netscape 4.61 I get a
message on the status bar saying...
Applet oracle.forms.engine.Main class oracle/forms/engine/Main
got a security violation: Method verification error
Can you help ?
If you know the answer, please let me know as soon as
posible.
Thanks for the answer....
Rgds,
Polo
nullBart LEBOEUF (guest) wrote:
: Hi,
: I've the same problem during this week. I've resolve the
: problem by replace DLL's
: in %ORACLE_HOME%\bin by the ifwcm60.dll from Developer CD-Rom
: (\extras\sp4\ifwcm60.dll) and vgs60.dll
(\extras\vgs\vgs60.dll).
: At first time, it doesn't work. I remove my environnement
: variables
: FORMS60_MAPPING and FORMS60_TIMEOUT from my System Control in
the
: Config panel, then I reboot and surprise, it works !!!
: (Look also in database registry of Windows with regedit
utility
: in
: [HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE] and remove the two
: variables if you found them.)
: I try on my two servers and it worked now perfectly.
: : Bart.
I respond your email, with my actual server configuration my
problem is now: I get the splash screen and after form is hanged.
My server configuration is:
Compaq PC, with Pentium II, the software is:
- Windows NT, with Service Pack 5
- Oracle Application Server, v.4.0.7.1.0 Enterprice Edition,
pathset 1
- Developer Server v.6 patchset 3
- My browser in this machine is Netscape 4.61
- Jinitiator 1.1.7.18 is also used.
My developer server is installed and running on the same machine
that OAS is. I am using other browser in other machine (IE5)
and trying to connect to the OAS on the first machine.
My problems begin when I launch ifsrv60.exe. I copied
ifwcm60.dll v.6.0.5.0.2, and other files required in the %
ORACLE_HOME%\bin
I forced listener Developer Server Port (
c:\orant\bin\ifsrv60.exe -listen port=9000 )
Now, I can connect with this process, with the following line:
telnet koala 9000. The listener is working now.
I tried to work with my (NonCartride-static html)forms60 form on
WEB without Jinitiator, but I couldn't.
With Netscape, in the status bar: Applet
oracle.forms.engine.Main can3t stop ERROR
With IE5, I get the splash screen and after the forms is hanged.
If I use Jinitiator:
With Netscape, in the status bar: Oracle Jinitiato: applet
oracle.forms.engine.Main inited then form is hanged.
With IE5, I get the splash screen and after that, the screen
freezes and looks like the form is hanged.
Any further suggestions on this?
Polo
null -
Server crashed. How do I reset iPads so they stop looking for the server?
I was using the OSX Server app on an old Mac Mini when it crashed. A cart of iPads had been set up to use Profile Manager with the Device Enrollment Program part of Apple Mobile Deployment. I have deleted the server from the Device Enrollment Program, but my iPads are stuck in set up looking for the server. I am willing to put them back in Configurator at this point, but Configurator will not recognize them. Help!
Yes, MaxAuthTries is involved here as a limit, but -vvv should tell you more of what's going on...
Warning: Permanently added '[FQDN]:2336' (RSA) to the list of known hosts.
is normal for a new ssh connection.
Too many authentication failures for USER
usually means the password is wrong, or the ssh certificate is not accepted or not acceptable. Or that you might possibly have tried a large number of different logins, and bumped into MaxAuthTries.
Try an ssh from the client into the target box with the -vvv switch (and the proper target port, if you're not using 22 here), and see if you can duplicate the error. The -vvv turns on gonzo logging. Depending on what's going on, you might also have to turn on logging in sshd. That's usually a configuration file option within the context of the daemon.
For grins, I'd also check DNS services on both the client and the server; use sudo changeip -checkhostname on the server, and dig +short www.example.com (substitute the FQDN of the server) on the client. -
How can I specify SMTP Email Server userID and password when using Email VIs?
How can I specify SMTP Email Server userID and password when using Email VIs included in Internet Toolkit?
Hi,
A similar question was posted on Discussion Forums soem time back. Please see the link below.
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=506500000008000000C7B00000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0
You would find the last post in the above thread quite useful where it has a link to OpenG code. I am also copying that link for your reference.
http://www.openg.org/tiki/tiki-index.php?page=OpenG+Internet+Connectivity+Tools
Please feel free to respond to this post with any questions/comments you may have.
Regards,
Ankita A.
National Instruments -
looking for some app which send SMS when there is Sim change in Iphone 4 G. Do we have any such software which is free or even paid will work.
I thought that is what the big deal was that people did not know until they opened the box and started using the iPhone 5, that it not only worked with one carrier but several carriers. I did not say it will work with any carrier at one time. I was trying to find out the reason for this and why people were so surprised that the iPhone 5 had this function and the reason for it. As stated in my post, is it there so that after your contract is up and you want to go to another carrier you do not have to purchase a new iPhone, you cna purchase a SIM card that works with your new carrier.
The Otterbox Defender has a tendency to let too much dirt, dust, etc. in the cracks on the case. At least this has been my expereince. I was thinking something more along some of the really durable cases at BallisticCaseCo.com
As far as the iPhone 5 having issues, I have heard that there were more than usual with the first couple of manufactured batches that were shipped. For example the Map App by Apple, the scratches on the backside of hundreds of iPhones, etc. I am hoping these will get to be less and less, but with the recent riot at the one plant in China where the iPhone 5 is assembled is supposed to increase the waiting time. -
System keeps looking for a 'server' that does not exist. Is says the old name of my Airport Extreme. Clicking it away (4x) finally gets through.
Other weirdness to report: my neighbor upstairs appears to have a Linksys router network on channel 6. My AEBS is on channel 1 so there shouldn't be interference... but according to iStumbler sometimes the signal leaps to 64000 (keep in mind my own Airport never tops 60)! Is that potentially the problem?
Might it be possible that your neighbor just acquired a 802.11n (pre-N) wireless router recently?
802.11n effectively increases capacity by doubling the number of Wi-Fi radios and increasing the number of antennas used to push signals out of those radios. 802.11n splits a data frame into multiple pieces. It then transmits these pieces in parallel using multiple radios that are attached to multiple antennas. These antennas blast out signals from virtually the same vantage point – scattering the signals everywhere.
You may find the following ZDNet article interesting: http://blogs.zdnet.com/Ou/?p=247
Even if he did not, and you are on good terms, you might want to ask if he can temporarily turn off his wireless, or, at least, reduce the signal strength to see if that will help in your situation. -
I am using iPhoto '09 Version 8.1.2 but can not use iCloud with it. I've looked for updates in iPhoto and iLife'11 but no luck. Suggestions very welcome.
No you won't necessarily lose your photos when upgrading but it's very very unwise not to back up first. Backing up is like using a seat belt in a car. You can drive without one for years and have no issues, but if you do have a problem the outcome will be a lot worse. So, too, with back ups. And upgrading is one of those times when the risks of a problem are higher.
Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store -
When running FB game apps, the image loaded is too large for the FB space. The program looks for a "zoom" setting and does not find it. This was from the error screen. I have not been able to locate where the image zoom is located (found the font adjustment). I am new to FireFox and would like to sort this out please.
Your installed plug in assume Shockwave Flash 10.3, but I thought it was Adobe Flash 10.3. Are they one and the same?
Below is the warning message from the Error ConsoleI'm not sure the CSS warning is relevant to Flash. Maybe adjust your overall zoom level on Facebook manually from the View menu?
View > Zoom
If you have the orange Firefox button, tap the Alt key to display the classic menu bar. -
Does any one know how to attach a document from your mail, while you are already in your e-mail, meaning not having to look for your file first and then open the e-mail.
Luis
Good question - and one that a lot of (business) people would like solved!
Your question prompted me to do some research, and I found this workaround posted by Scott Grossberg:
His solution actually addresses a second problem too - how to attach a document when replying to an email message. In your case you may not need to consider the "reply" aspect - but if not right now, it'll come in useful someday!
I've pasted it verbatim - if it works for you (it does for me) then all credit goes to Scott for solving the problem. There's just one thing I'd add to his solution: you will probably want to rename the message, as by default Goodreader gives it the Subject line: Mail with GoodReader attachments.
THE GOODREADER OPTION
1. CREATE the document you want to send.
2. SAVE it to GoodReader (this will require you to buy and install the app).
3. Go to your email and OPEN the email thread to which you want to Reply and attach your file.
4. COMPOSE your Reply.
5. DOUBLE TAP the message.
6. TAP SELECT ALL. This will copy the entire email thread.
7. OPEN GOODREADER on the iPad and go to the file you want to send as part of your Reply.
8. At the bottom of the GoodReader screen you will see an EXPORT icon (it looks like a rectangle with an arrow pointing to the right).
9. TAP the Export button.
10. TAP EMAIL FILE. Depending on your needs, tap either SEND FILE “AS IS” or “FLATTEN ANNOTATIONS.” This will open a compose message screen with the chosen document already attached.
11. TAP in the body of the email screen. TAP PASTE. This will place your composed Reply and the prior email thread into the message.
12. ENTER the Recipients’ names in the TO: field of your message.
13. SEND your email Reply.
The modified version (= when composing a new message rather than a reply):
1 Make sure that the doc you want to attach is saved in GoodReader
2 In the message you are composing, double tap, select all, and then copy.
3 Open GoodReader and select the file you want to attach
4 Select the export button at the bottom of screen
5 Select e-mail file
6 Position cursor in body of the email message, tap and paste. You may want to delete the "sent from GoodReader" text that precedes the attachment.
7 Rename your message (as by default it will be Mail with GoodReader attachments)
8 Add the recipient's address in the To field.
Hope this helps! All thanks to Scott for this workaround. -
iPhone 4s.used to get swoosh sound every time I got an email. Now I don't and I have to open email for it to connect and get new messages. What do I do?
Once you purchase or download an app it will always be associated with the Apple ID used to download it. When that app requires and update you must use the Apple ID and password used to download it in the first place. The only way around this is to delete the apps the require the old Apple ID and download or purchase them again with the new Apple ID.
-
API for Proxy Server Connection
Hi,
can anybody tell me any API for Proxy Server Connection in java EXCLUDING
httpclient(apache) and setting system setting and making a urlconnection.hey thanx for replying
Firstly i clear my requirement
I want some other way of connecting to Proxy Server Irrespective of Httpclient and setting system properties and then making url Connection ,these ways are clear to me .
I found one API HTTPClient (not belonging to apache Httpclient) its different
u check this at
http://www.innovation.ch/java/HTTPClient/api/index-all.html#_S_
But the problem is this API Does't support NTLM
i tried to found higher version of this API but i did't get .
API should support :
1. NTML
2.JDK 1.4
3.SOCKS (not necessary)
4.HTTP protocol (other like FTP ... not necessary) -
Looking for Policy Server Developers
Hello,
I have a company located in NY, Paris and Israel and we are thinking about integrating a LiveCycle Policy Server solution for document control.
I am looking for developers to build and customize this solution.
Can anybody help find the right team for this kind of project?
Are there any people interested in developing our program?
Thanks. Please contact me at [email protected]
DanielHello tedro2,
By submitting your application to this contest, you agree that the intellectual property of your creation goes public, under Apache 2.0 license. After the contest is over, we will publish your application source code, as we are interested to allow the open-source community to learn from these experiences.
Under your approval, we can also publish your application in the XTWIP showcase (by carefully mentioning that you are the creator).
The scope is not to repackage your application into a new product, but mainly to offer other developers the possibility to see more collaborative applications in action, as our belief is that web should be far more collaborative than it is today.
Thank you for your question,
Cristian Andreica
co-founder XTWIP -
How do I configure itunes to look for my Outlook contacts and calendar?
Being fairly new with the iPhone, how do I configure itunes to look for my Outlook contacts and calendar? At the moment,when I try to sync, I get the "No supported calendar application can be found" message. Thanks!
You could try uninstalling iTunes and all of its components as by following this guide: http://support.apple.com/kb/HT1923, then reinstalling iTunes. This will replace a potentially corrupt Outlook plugin. You must follow this guide exactly or it will not be successful. Note: uninstalling iTunes will only remove the application; it will not touch your iTunes library or data.
Maybe you are looking for
-
High CPU usage because of Biztalk Server
How do you prevent Biztalk Server from causing the CPU to go high? Christiane
-
Multiple calls for missing images
We were experiencing a strange "double adding" of basket items in FF4 on a store that uses a GET method URL. Having traced exactly what was happening using Fiddler web debugging proxy, it seems that if a page loads with missing images, FF4 is making
-
Strange problem when re-launching an application
I have this program which can self-update to the latest version. What it does is downloads the new version of itself, deletes the old version, renames the new version, sets its permissions and executes it. Up until this next point, everything worked
-
How change the wallpaper/background with a command line ?
Hi people, did someone know how change the wallpaper with a command line ? thx a lot
-
How can I upload a calendar file (ics) to iCloud? Also, is there a way to download all my contacts in iCloud so I can make a backup copy in case iCloud somehow loses it?