Looking for a special makepkg document

Last night I was browsing a document in the Wiki that demonstrated configuring a package for makepkg, using a particular application as an example. I was tired, so decided I'd read it over the next day (today). Well, I can't seem to find it anymore. I've looked over all the docs in the Packages and Makepkg section of the Wiki, and none of them are the one I'm looking for. Anyone know what document I'm talking about, and where I might find it? It really seemed quite informative.

cactus wrote:
http://wiki2.archlinux.org/index.php/Pa … %20Makepkg
of which
http://wiki2.archlinux.org/index.php/Th … guidelines
and
http://wiki2.archlinux.org/index.php/AB … d%20System
are especially tasty for makepkg related stuff.
Well, it was similar to the last one you cited, but it used a real application (I forget its name), not foo.

Similar Messages

  • Looking for a special T530

    Hi,
    I am looking for a special T530 model, but can't find it. Perhaps it does not exists at all. I have eyesight problems, so the best available screen resolution for me is HD (1366x768) for a 15,6" display. On a HD+ or FHD display the fonts are too small for me, and I get eyestrain in a few minutes. (I understand there is dpi scaling but it is never implemented perfectly across all apps).
    I would like to have the following part in my "dream" T530:
    3rd generation Intel core i5 CPU, nVIDIA NVS 5400 dedicated GPU, fingerprint reader, HD (1366x768) display, Hungarian keyboard. The other parts are mostly adequate for me.
    The 2429CTO model is almost good for me, but it does not have a fingerprint reader and NVS GPU,
    the N1B3RHV has a HD+ display, the N1B5WHV has i3 cpu and intel GPU, and so on
    Can somebody help me to find my dream laptop?
    TIA,
    Gellert
    Solved!
    Go to Solution.

    With eyesite problems you'll want the largest screen possible as well as a quality screen. 17" min in my opinion but there was a much larger laptop/lugable although heavy (around 15-20lbs) built by Dell which had and even larger screen as a desktop replacement. I am not sure if they still make it. You might want to check that out. Otherwise you'll be hooking up and external monitor. Good Luck
    T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
    Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
    Windows 7 Home Prem - 64bit w/8GB DDR3

  • Looking for the latest Performance documents

    Hello,
    Latley we installed SP14.
    I am looking for SAP's latest documents which involves performence
    issues such as: Tuning, Fine Tuning, Troubleshooting guide ect.
    My current documents are relevant to SP2 and I would like to read the latest ones at this subject.
    Can someone please attach here the relevant links? Is there a central place where I can download these documents?
    Roy.

    Ho Roy,
    > Latley we installed SP14
    Congrats
    > Can someone please attach here the relevant links
    The tuning guides are to be found under http://service.sap.com/nw04 -- How-to Guides -- Portal, KM and Collaboration; for example:
    TREX: How To Configure Efficient Indexing
    EP: Finetuning Performance of Portal Platform
    KM: Tuning the Performance of Knowledge Management
    Hope it helps
    Detlev

  • Looking for a Third Party document editor

    I am running a Palm IIIxe with Palm OS 3.5 on a Vista 32 bit laptop with Palm Desktop 7.2 with HOTSYNCSTETUP patch. 
    I am looking for a document editor that I can use so that I can create text documents and import them into my wordprocessor after sync.
    Could someone help me with this before the summer semester starts in June. 
    Hearns
    Post relates to: Palm IIIxe

    I'm not sure if they made a version for the Palm IIIxe but you can look into Docs to Go. If that is not compatible or does not work browse around www.freewarepalm.com for a bit and you might find what you need.
    I hope this information is useful.
    -Pat

  • Looking For 9i - 10G Differences Document

    Does anyone know of a good document that spells out the differences/changes between Oracle 9I to Oracle 10G when upgrading ?
    Anything I need to be concerned about within my databases such as data types or column lengths ??
    I already have the "New Features" document
    Thanks
    Jim

    The new features (if you refer to the one found at the regular oracle documentation site) is ok to understand the differences between versions, but it is not thoroughful, it just points out the new features found on 10g, if you want to detail some of them that may be of interest to you you should look for the specific topic on the concepts, and administration manuals.
    For upgrade purposes you should address to the upgrade guide and get familiar with the issues during this upgrade process.
    Ref. Oracle® Database Upgrade Guide
    10g Release 2 (10.2)
    Part Number B14238-01
    I don't understand what you mean by 'data types or column lengths', may be you mean the Datatype Limits.
    ~ Madrid

  • Looking for a special app

    im looking for an app that has a lock feature an allows me to store other apps within it to keep them hid from the kids

    No. The SDK does not allow apps to edit the "core" kernels of the iPhone. Such an app would manipulate installs or the springboard, both of which are "core."
    Unless Apple changes the nature of the SDK (doubtful) then no programer has the necessary access to create such an app.

  • Looking for Wedding Special Effects for FCP!!!

    Hi guys,
    Help me out here! Can someone tell me where I can find wedding effects/ plugins and transitions for FCP.
    I have seen things like firework plugins on tv or flowers making the transitions and so forth.
    I looking for something similar or better.
    Thanks a bunch in advance everyone,
    Zia

    Hi Dave,
    I am reffering to stuff like Digital Juice Toolkit7 Wedding Tools II.
    I am also looking for plugins or matte like Sparkles, Flowers, Fireworks and others to work as animated mattes on top of a clip.
    Thanks,
    Zia

  • Looking for something special...

    Hi guys, I am looking for a kind of 'casino java games framework', ready to run on my company's website, which provides integration for electronic payments (credit cards, e-wallets). Does anyone of you know (or owns) of such a service which can be bought ready to be plugged in?

    I've recently started using TeamViewer. If you can walk a person through going to http://www.teamviewer.com and clicking on "Start Full Version" and getting them to download it and run it, then you're good to go. It's cross-platform both ways so you can control a Mac from a PC and a PC from a Mac in addition to M-M and P-P. If they're on a PC, the download is an executable which when they double-click it, asks them if they'd like to run it or install it. Just have them run it and in a few seconds they will have an ID number and random password generated that they can tell you over the phone. Then you type it into your TeamViewer app and you're controlling their screen. If they're on a Mac, the download is a disk image so you have them mount it and then just run the app directly from the disk image. Once you're connected you can fully install the app for future use or just help them out. It's pretty much the simplest cross-platform control system I've found to deal with situations where it's not already setup for me to support. On top of all that, it's free for personal use!
    Jeff

  • Looking for read me first document on CCO ?

    hello
    i'm looking for read me first for MDS9000
    up to date (V2.0)
    can't find it ,
    so some lucky can give me a pointer on CCO for it ?
    thanks
    JYP

    Sorry for the confusion, I do recall there is a small booklet that comes with the MDS.
    Is it actuall called Readme First ? and is it based on a SAN/OS release? Is it the Quick Start Guide like the one here?
    http://www.cisco.com/en/US/partner/products/ps5989/products_configuration_basic_chapter09186a00804211e8.html

  • Looking for BODS Best Practice document

    Hi,
    Can anyone pls. share BODS best practice document in case you have any. I tried to find out from net and i couldn't.
    Thanks and Regards,
    Gannu.N

    Ok you need some spoon feeding it seems. You should have checked the correct answer from the post and searched the key word "SAP Best Practices for Data Migration and Data Quality" in google.
    Here's the link SAP Best Practices for Data Migration and Data Quality – SAP Help Portal Page
    Also as a heads up, there won't be any single document which gives all the details you need. You need to narrow down your search and focus on the required material only.

  • Looking for a special land line phone system

    Hello to all,
    Is there a phone system available where a wireless component plugs into a phone jack and transmits the signal to a full base phone?
    This sounds confusing but here's the situation. My mom has an apartment in an assisted living residence.
    The land line phone jack is on a wall across the room where she normally sits.
    I could buy a 30 foot line and run it across the floor to bring the phone base to her, but I was hoping that this type of phone system exists. I wanted to eliminate running a long phone line.
    Has anyone heard or seen this? Thanks in advance for your help.

    Do you mean something like  THIS  ?
    ====================================================================================
    Error exists between keyboard and chair.

  • Looking for a special feature

    I use Cisco Attendant Console to transfer calls to a dial number of my enterprise and I see if this dial number is busy.
    Now I want to know if a mobile number is busy when I transfer a call to it and Cisco Attendant Console don't permit it. I know that with analogic telephony with an application called Phone Manager Lite of Avaya you can do that.
    Is there any seemed soluion in Cisco?.

    Carlos:
    Attendant Colsole does not have the ability to perform a 'supervised transfer' with standard configuration, although Personal Assistant does.
    http://www.cisco.com/en/US/customer/products/sw/voicesw/ps2026/index.html
    I have heard of some that use CTI route points and IPCC to attempt this with CCM, but have not heard if it was successful.
    Hope that helps.
    Tom

  • HR-PT: looking for special procedure for IT2001

    Hello,
    I'am looking for a special routine (function,...), wich can calcute for each person
    the correct amount of holidays.
    Example:
    I read a record from  IT 2001 (Holidays 0018; running from 25.02.2007-10.03.2007).
    I need now the correct amount of holidays from 25.02.2007 to 28.02.2007 and later
    01.03.2007 -10.03.2007 (cause I must split for each month).
    This amount I will subtract from the amount of the month before (to built up a forecast) - just by the way.
    So I have to take care of weekends, public holidays and free days (which depends on the personal work schedule rule, holiday calendar and so on).
    So far, I didn't found a match.
    Kind regards
    Maik

    found it myself

  • Looking for "PDF Public-Key Digital Signature and Encryption Specification"

    Hi,
    i am looking for the following ("old") document:
    PDF Public-Key Digital Signature and Encryption Specification
    Originally i could be found here:
    http://partners.adobe.com/asn/developer/acrosdk/DOCS/ppk_pdfspec.pdf
    But not anymore. Does somebody of you still have it? Adobe today just offers the latest documents but i specifically need that older version.
    Or is there an archive i don't know of?
    Thanks for your help,
    ToM

    You can read the PDF 1.5 specification OR even ISO 32000-1 itself for that information. Each feature is "tagged" with the specific version in which it was introduced.
    Digital Signatures were first introduced in Acrobat 4 (PDF 1.3) and have seen various improvements which each version since.

  • Looking for IDoc-Structure Documentation, not WE60

    Hello guys,
    well I have to write a concept in which i would like to point out the obligatory fields of the single Segments of a DELVRY01 e.g.
    Therefore i am looking for some kind of document, where alle fields are listed in a table and the one needed are marked. In WE60 is only the possibility to export in html, but i want a table for importing it into the blueprint.
    Can somebody help me - I googled this but nothing appropriate found!
    br
    P.S. i found sth. for SDPIID01 but i have some other IDocs which i would like to document
    VBELN     CHAR 10     Folgevertriebsbeleg     etc

    Hi Fritz,
    Check out this forum..
    [Mandatory segments in an IDOC!|Mandatory segments in an IDOC!]
    Hope this wull help.
    Nilesh

Maybe you are looking for

  • DND Tables with JTextField Editors Mouse Problem

    Hello! I am trying to be able to drag and drop between two tables and within a table and also use a TextArea as the editor of the cells. I am having the following problem: When I click on a cell both the drag_start and the cell is in editor mode so I

  • Find locale in Agentry client at client side

    Hi I am working on custom agentry application. In this application I have images which is having English wording. Now I am planning to support multiple language support for my agentry application. Let me share this idea with you. Currently I am plann

  • Error during vendor creation thru XK01

    Dear All, While creating Vendor thru XK01, system is asking for reconciliation account.... I cant see anything in possible options and if I enter any number it says " Entry does not exist in SKB1" Plz suggest.. Regds, Vijay

  • HT1750 New batteries in pad and keyboard but wont connecton start up - help please.....

    Can someone help me, I have an imac and it suddenly wont recognise the wireless keyboard and tracker pad. Have just replaced batteries and hard resarted the mac but wont work. I have tried another wireless mouse which works but dont have another keyb

  • Aperture 2.0-slow loading RAW

    I got the trial version of Aperture 2.0 and was having a great time with my jpeg projects. The internet is down at my home so I'm on my MBP 2.4. Everything was working great until I imported a project that came from Aperture 1.5 on my home machine. I