Looking for a step-by-step migration guide Aperture - Adobe Lightroom 5

Hello
I am searching a step-by-step guide on how to import an Apple Aperture Mediathek into Adobe Lightroom 5.
Does someone know whats the best guide?
Thanks
Pidu

OK, I found a link Aperture import plugin now available.
But there I see a remark about what this tool is not able to do:
Image adjustments
I adjusted every foto of my 40'000 picture library.
Is there another way?
Thanks
Pidu

Similar Messages

Looking for a 'step filter' plugin...

Essentially I'm looking for a step based filter plugin that works in a similar way to Delay Designer, whereby you can define the cutoff/resonance/pan etc within a grid, thus giving complete control over where, when and for how long parts are filtered.
This would be a pretty cool plug I think and I've looked before but not found anything. I like the simplicity of Delay Designer too so I don't want to get lost in features I don't need. Does anyone know of such a thing? I have Reaktor if anyone knows any user files, but I always find it a bit complex and painful. Otherwise I'm prepared to pay for something if it's decent.
Cheers

This has a 128 step sequencer for filtering and panning:
http://www.camelaudio.com/camelspace.php
Also the Ensemble "Vierring" in your Reaktor factory Library has fantastic filtering features as each of the 4 filter bands can be linked to it's own step sequencer plus many FX options.
Message was edited by: Sampleconstruct

I'm looking for a capture device that is compatible with Adobe Flash Media Live Encoder. I bought elgato but it is not compatible. Anyone know?

I'm looking for a capture device that is compatible with Adobe Flash Media Live Encoder. I bought elgato but it is not compatible. Anyone know?

This is just a shot in the dark....
Do you have all your devices hooked up (and on) when you launch FMLE? For example -- your camera or digitizer? When FMLE launches it will try to launch with the last known settings... including input devices. If it can't find these devices (they're not hooked up and on) it can crash, although in most situations it will simply show a default screen with default settings.
If you do have your equipment hooked up (and on) when you launch FMLE, try unplugging them and then launching FMLE so that it opens up in default configuration mode (no input devices selected; all default settings). Then uncheck the "preview" boxes for both your input and output preview windows. Close FMLE and then plug in your equipment (and turn it on) and relaunch FMLE. I offer this suggestion as FMLE can sometimes act funny when the preview windows are open with certain types of input devices. Don't worry -- you don't have to keep the preview windows off forever. If you can get FMLE to successfully launch with the preview windows off, then you can set your settings however you like and save the profile. Then quit and relaunch FMLE and then turn the preview windows back on and see if it works. If it does, great. Just be aware that making any settings changes while the preview windows are open could result in FMLE crashing. Again -- this only happens with some capture devices, such as certain Dazzle capture boxes.
If none of this works, you could always try to upgrade to FMLE 3.2 and see if that solves your problem.

I am looking for a way to automate index creation using Adobe Reader Pro without having to use the screen user interface, as the indexing has to be run by a batch process.

I am looking for a way to automate index creation using Adobe Reader Pro without having to use the screen user interface, as the indexing has to be run by a batch process.

[discussion moved to Creating, Editing & Exporting PDFs forum.]

Looking for Third Party SAP Data Migration Tools

Hi all,
I don't know if this is the right place but I was wondering if anyone can provide me a list or a link of the different third party SAP Data Migration Tools. I am specifically looking for productions that migrate data from one SAP system to another.
Thanks and I hope to hear from you.
Regards

Hi,
Just to weight out my options and compare the diffrent products as a research of sort.
For SAP tools they use LSMW I believe but I want to check the alternatives.
Regards

Which is the best way to migrate from aperture to lightroom?

Hello everybody,
I have been using the Aperture trial for some time and I found it interesting.
Unfortunately in the meanwhile Lion came out and I find it ugly. Although I do not want to discuss about Lion here I plan to move away from Apple as soon as my 2007 iMac stops working, so I moved to applications supported by other OSs (Preview->Acrobat reader, iWorks->MSOffice, Mail->Thunderbird and so on). I am also going to buy Lightroom, that will also work on my new Win7 laptop I had to buy for a new job.
My question is: is there a way to quickly migrate my Aperture library to Lightroom or should I reimport all the original photos into it?
Thank you for your attention
Stefano

I realize this topic is old but doens't appear to be answered.
phosgraphis
I agree. I went the adobe way. I love my MBPr though.
stefano67
I wrote about why I think it's better for photos here why it's better for video (for fusion videographers only) here, why I switched here, and how to switch here with this associated video tutorial for switching.
Those posts list the pros and cons between the two.

Migrating from Aperture to Lightroom?

I am currently examining the possibility to switch from Aperture 3 to Lightroom 3.
I am currently looking for best practices to do so and start on a good footing.
For example, I have exported all masters from my managed library using a "Year/Month/Project" hierarchy. This pretty much reflected the folder structure I had in AP3.
The export process created the NEF (RAW) files along with large JPGs.
Question 1: Do I need to keep the JPG files? Or can I delete them?
Question 2: Will LR3 "see" 2 pics if I keep the JPG file or will it link it to the NEF master file?
Question 3: What happens to the post-processing jobs I did in AP3? Is this lost?
Many thanks.
Max
maxphotoblog.net

If you don't have a need for the large JPEG files, then Lightroom will be fine with just the raw files.
But (2) if you decide to keep them, Lightroom will normally only display the raw file but manages it and the hidden JPEG. So if you rename the raw file or move it to another folder, Lightroom will quietly rename or move the JPEG too. However, if you want to see the JPEG as a completely independent file, there's an option in Preferences > General.
re 3, yes you'll lose the Aperture adjustments. So as a strategy, I'd suggest leaving the new masters folder as it is. Don't ever rename any files in it, and don't move any files or folders. If you want to reprint one of these "legacy" pictures with Aperture adjustments, you'd do so in Aperture.
You can keep keywords and other IPTC data though - use Aperture's Metadata > Write IPTC Metadata command. When you then import the files into Lightroom, all your metadata will be brought in too.
John

Looking for a Step by Step to place Aperture Library on External

Can anyone direct me to step by step directions on how to export my Aperture library to an external hard drive?
I've seen rambling threads that touch on it of course but they refer to "Managed' or 'Referenced' and other terms that I am not sure how to check if my library are those.
I am on a iMac with only a 500 gig drive and my Aperture library is 100 Gigs of that drive! I'd like to place it on an external for obvious reasons. Crazy that Apple doesn't make this a WHOLE lot easier.
Thanks in advance for your input.

Aperture is an extremely capable and powerful program. It is not for beginners or for those who are not interested in learning how to use it. Just my humble opinion.
It is important that you understand the difference between Managed Masters and Referenced Masters. Of course, you must know what a Master is.
It is easy to tell which of which you have in your Library. Aperture uses Badges to inform you. (Badges are shown in the Metadata Overlays, as well as on the Metadata tab of the Inspector. There are seven Metadata Overlays: you should customize each of them to meet your needs.)
You can also filter Photos view using the Rule "File Status". The selections there are straightforward.
100 GB is a moderately large Library. The recommended method of lessening the storage burden a large Library places on your system drive is to convert some or all of your Images' Masters from Managed to Referenced. Aperture makes this easy to do.
It is possible to run an Aperture Library from an external drive. The faster the drive the better. I have done this over FW400 with 5200 rpm drives, but the minimum I would recommend is FW800 with a 7200 rpm drive with a sizable cache.
Putting the Library on an external drive is less desirable than putting just some or all of that Library's Images' Masters on an external drive and leaving the Library on your system drive.
Moving the Library is simple and, in point of fact, couldn't be easier. (You don't want to export your Library; you want to move it.) With Aperture closed, select the Library in Finder (the extension is "aplibrary"). Move it where you want it to be. Double-click it to launch Aperture and load the Library from its new location. Now every time you launch Aperture, it will load that Library (as long as it is on-line).
The User Manual is here. It is an excellent resource. I have highlighted in orange above some of the terms you will need to know. I strongly suggest looking each of them up in the Manual (note the Glossary at the end of the Manual), and reading the first seven chapters which introduce the program and provide a worthy map for your self-teaching.
Message was edited by: Kirby Krieger -- general clean up.

Looking for Workflow steps

Hi,
I am very new to workflow and I need to develop a workflow for the following scenario.
1) User changes Delivery date in PO for single or multiple items then send an Email to a user upon save.
2) I also want to delay email notification till end of the day.
I will appreciate if any one provides me the steps.
Regards
Nilesh

I think if you are changing the Delivery date you can track this as the Change Event of BO BUS2012 gets triggered. You can track what type of change by coding in a virtual attribute of your Custom BO which is delegated to standard BO. In the attribute you should code that filter the changes are relevant(Delivery date change) for workflow or not. If the changes are relevant the Flag will be set. In the start condition(SWB_COND) of Wflow you should make use of this Flag for triggering.
Regarding sending mail at end of day this can be done using Requested start Tab of step in Workflow Builder.
Thanks
Arghadip

Looking for sequence steps for major upgrade of 15" MBP

Can anyone offer a sequence of steps to upgrade
From: OS 10.6, windows XP, RAM 2GB, Hard drive 200 GB
To: OS Mountain Lion, Windows 7 64 bit, 4 GB RAM, 1tb Harddrive
I have the software and the hardware is coming from OWC.
My ?? are what first, hardware or software, in what order?
All tips are welcome!
2008 15" MBP
MacBookPro4,1
Intel Core 2 Duo
MBP41.00C1.B03

Hardware. The order doesn't matter. Software, you should upgrade OS X first from the Mac App Store and then upgrade to Windows 7.
Austin

Looking for the steps to configure remote access to HD connected to airport Extreme via Surfboard modem

I found an article that seemed a little dated outlining steps on how to access files on my exteral hard drive that is connected to my airport extreme. I have enabled personal file sharing, specified the ports and put in the internal IP address. To test, I am connecting to VPN on my ipad, firing up a browser and trying to navigate to the external IP address and port number specified (xxx.xx.xxx.xx:xxxx) I keep getting a page cannot be displayed error. Any suggestions?

Test from a real WAN connection.. not a loop around via vpn. as it is hard to know where the problem is.. is it the vpn or the port forwarding.
Also it is hard to test from ipad as the only effective protocol to use is AFP on 548 and ipad is not able to do it.
Read Tesserax info on remote access.
https://discussions.apple.com/docs/DOC-3413

Looking for a BO XI R2 migration expert for a question

I would like to contact with an expert in BO XI R2 migrations. Please email me!Thanks in advance,Cris V. 

I am one. Contact me [email protected]

Looking for some Office 365 Hybrid Migration help

Basically I just need to talk this out with someone, as I'm not a pro with mail processing and setup, and just want to make sure I do the right setup, at the right time, to keep email downtime to an absolute minimum. Project: Move on-premise Exchange 2013 to a hybrid solution with O365, moving our full-time users to O365 and leave our part-time staff on internal server since they don't use email often and don't need the flexibility (nor our cost) of the license.
Initial setup:On-premise Exchange 2013, using the cloud product "Websense Perimeter Email Protection" that basically syncs to our AD and acts as a first-line-of-defense that only allows email to come through to accounts that are in our AD system. Current:All AD accounts synced to O365 using on-premise DirSync, and licenses purchased for the few accounts I'll test with for now....
This topic first appeared in the Spiceworks Community

Hi,
These links might be helpful:
http://help.outlook.com/140/ee441202.aspx
http://help.outlook.com/en-us/140/ff633682.aspx
We lack testing environment here for this kind of issues, we have another dedicated support teams in
Microsoft Office 365 Community. I would suggest you to post there, where you can get more experienced responses:
http://community.office365.com/en-us/f/default.aspx
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Thanks,
Ethan Hua CHN
TechNet Community Support

Looking for app to keep shutter open, smaller aperture

I like to take long-exposure shots with my old medium-format Rolleiflex camera.
And I'd love to do the same with my iPhone.
Are there any apps that allow you to keep the shutter open for an hour or longer - and shrink the aperture down to almost pinhole size?
Thanks so much,
Marcus

There are a number of camera apps in the App store. The best bet would be to search there for information on any number of them. However, I believe the specs for the iPhone camera state it has a fixed f-stop. You might want to go over to www.apple.com/iphone and check out the specs to see for yourself.

PLEASE help me!!! I,ve been all over looking for help/store or whatever to down load adobe flash player to open a certain website. I need that app or something similar. I am a first time iPad user and not that swift on a computer either

Please!!
help me down load adobe flash player or something similar for my iPad. I want to open a certain website and it's required. I don't know where to go. i am a first time iPad user and not to swift on a computer either. Thank you

Allan Eckert wrote:
You are going to have to get Steve Jobs to change his opinion about Flash which will be like getting a Baptist to drink beer, next to impossible.
Allan
Funny you mentioned that analogy... because John the Baptist was a heavy drinker... (could steve jobs be secretly accessing flash content on his ipad?)

Looking for a step-by-step migration guide Aperture - Adobe Lightroom 5

Similar Messages

Maybe you are looking for