Looking for a strait forword answer about the CS5.5 Upgrade. How does this differ with the CS5?

I just got Flash Professional CS5 3 months ago. Now I see a latest Flash Software (CS5.5) out but the upgrade is costly. I'm going threw Creative Edge to learn
how to be more familaer with what projects I can do. As I was going threw a new book threw creative edge, I downloaded the materal so I can understand what it is on what it is trying to teach me. As I opened it, My Flash CS5 gave me a prompt that the file was created with Flash CS5.5 and it was not able to open it. Is this upgrade mandatory for the adobe users?

You definitely need to learn to be patient when it comes to using forums - you could barely go an hour without making a remark like that?!
These are user-to-user forums.  Adobe employees do not visit here often.  If you want information about how CS5.5 differs from CS5, then do what anyone would do and look up the product description via the Adobe Products section to see what's new about CS5.5.
Upgrades are not mandatory for anyone.

Similar Messages

  • HT5622 looking to take off my photo's off my phone and store them on my computer, how does this work with the new update on a iphone 3g

    trying to take photos off my 3G since the upgrade,,,   I am not seeing the popup to take photo's off and store them on my computer

    thanks folks,  I quessed i could do it this way.. Usually the window pops up to transfer the pictures...
    THANKS FOR ALL OF YOUR HELP!!!!!!!!!!!!!!!!!

  • I presently use an older AirPort Extreme but my reception comes & goes does this occur with the new extreme?

    I presently use an older AirPort Extreme but my reception comes & goes. Does this occur with the newer version?

    1)  If the reception comes and goes as a result of wireless interference from other sources in your home and around the home...other wireless networks in the neighborhood....or...nearby cordless phones.....then a new router is likely to experience the same issues. See this Apple support document for symptoms and fixes of wireless interference.
    http://support.apple.com/kb/HT1365
    2) If the reception comes and goes as a result of an aging power supply in the older AirPort Exteme or another component that is intermittently acting up, then a new router should take care of that.
    What we cannot tell you is whether 1) or 2) applies to your situation.  If possible, it would be good idea to take the older AirPort to an Apple Store or Apple Servicer....if you have one near you....to let them take a look.

  • Need lightroom 4.4 asmac is 10.6.8 and not compatible with anything higher. Does this come with the creative cloud? Would really like a disc but that doesn't seem to happen anymore. Currently have cs4 and d7100 hence need 4.4 to open raw Any idea

    need lightroom 4.4 asmac is 10.6.8 and not compatible with anything higher. Does this come with the creative cloud? Would really like a disc but that doesn't seem to happen anymore. Currently have cs4 and d7100 hence need 4.4 to open raw Any ideas? Is this now customer service or does adobe have a customer service team . Site not user friendly. Thanks

    Graham Giles wrote:
    Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
    No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
    TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
    •  I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
    There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
    On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
    I know that using a cloned drive would work well in this instance.
    I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
    With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

  • Exchange 2010 CAS proxy to Exchange 2013 CAS: Use the following link to open this mailbox with the best performance:

    Hello,
    I've installed Exchange 2013 into Exchange 2010 infrastructure
    [ single Exchange 2010 server; single AD site; AD = 2003 ],
    and moved one mailbox [ Test user ] to Exchange 2013.
    When I login internally through 2013 OWA to access mailboxes on 2010, then proxy works fine.
    When I login internally through 2010 OWA to access mailboxes on 2013, then a message appears:
        Use the following link to open this mailbox with the best performance: with link to 2013 OWA...
    What is wrong ?
    I've checked and changed settings by:
    Get-OwaVirtualDirectory, Set-OwaVirtualDirectory
    [PS] C:\work>Get-OwaVirtualDirectory -Identity 'ex10\owa (Default Web Site)' | fl server,name, *auth*,*redir*,*url*
    Server                        : EX10
    Name                          : owa (Default Web Site)
    ClientAuthCleanupLevel        : High
    InternalAuthenticationMethods : {Basic, Fba, Ntlm, WindowsIntegrated}
    BasicAuthentication           : True
    WindowsAuthentication         : True
    DigestAuthentication          : False
    FormsAuthentication           : True
    LiveIdAuthentication          : False
    AdfsAuthentication            : False
    OAuthAuthentication           : False
    ExternalAuthenticationMethods : {Fba}
    RedirectToOptimalOWAServer    : True
    LegacyRedirectType            : Silent
    Url                           : {}
    SetPhotoURL                   :
    Exchange2003Url               :
    FailbackUrl                   :
    InternalUrl                   : https://ex10.contoso.com/owa
    ExternalUrl                   : https://ex10.contoso.com/owa
    [PS] C:\work>Get-OwaVirtualDirectory -Identity 'ex13\owa (Default Web Site)' | fl server,name, *auth*,*redir*,*url*
    Server                        : EX13
    Name                          : owa (Default Web Site)
    ClientAuthCleanupLevel        : High
    InternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated}
    BasicAuthentication           : True
    WindowsAuthentication         : True
    DigestAuthentication          : False
    FormsAuthentication           : False
    LiveIdAuthentication          : False
    AdfsAuthentication            : False
    OAuthAuthentication           : False
    ExternalAuthenticationMethods : {Fba}
    RedirectToOptimalOWAServer    : True
    LegacyRedirectType            : Silent
    Url                           : {}
    SetPhotoURL                   :
    Exchange2003Url               :
    FailbackUrl                   :
    InternalUrl                   : https://ex13.contoso.com/owa
    ExternalUrl                   :
    best regards Janusz Such

    Hi Janusz Such,
    Based on my knowledge, CAS proxy can only from later version to previous version.
    Some like CAS2013 to CAS2010/2007, CAS2013 to CAS2013. 
    Thanks
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Mavis Huang
    TechNet Community Support

  • Does this work with the macbook?

    does this work with the new macbook?
    Apple Mini DVI to Video Adapter
    http://store.apple.com/Apple/WebObjects/ukstore.woa/6644042/wo/Dg4BvxbpYG2k3zYlb 4c1UxPXhbI/8.0.23.1.0.8.25.7.11.0.3
    it dosent state the macbook though

    thanks just got 1

  • How does it work with the iphone

    i bought a time capsule but i don't know how to use it with the iphone, ipod, or ipad.  can you please tell me the uses for those devices and how to use them?

    TC has no direct relevance to any of the iOS devices..
    They backup to iTunes on the computer, which is then backed up by Time Machine to the Time Capsule.
    You can access files if you load an app like file browser.. but TC is not a media server .. it is a dumb hard disk and other than saving files there is nothing useful to do with the TC.

  • With Mountain Lion Developer release, and most likely the finished release having all updates via the App store, how does ARD fit into the picture?

    The following question is based on what I have seen in some early reports of the Developer version of Mountain Lion.
    Since the Developer Release of Mountain Lion, and the final version also I expect, having all updates being installed via the App Store by the user, how is a administrator to keep hundreds of systems current with all updates?  The App Store requires, at least in its current version, a user to log in with their Apple Account ID and password even to do no cost updates.  In an Enterprise operation I expect a number, maybe the majority of users will just not bother to do the updates.
    Is there some way to use ARD to handle keeping Mountain Lion systems fully updated from an ARD Admin system?  Is there a backdoor for updating systems?

    No one is going to be able to discuss how ARD might work with Mountain Lion since anyone running an ML system is under nondisclosure and cannot discuss it publicly. All anyone here can talk about is how ARD can (or cannot, as the case may be) be used to keep Lion systems updated.
    At this point I don't see any easy option in ARD to run Mac App Store updates, but it might be possible to script that, though whether that could run in background, as OS updates can, or on a system without a user logged in I don't know. Someone else here may be able to offer insight. For enterprise-level management I think most people have more-or-less given up on ARD as their primary tool, though, and moved to one of the third-party solutions.
    Regards.

  • We have several i componets with different users how does that work with the mac

    we only have one computer, so how does the cloud keep them seperate or does everyone know what everyoe is doing ?

    By different Apple IDs for data. For device it's the device names you've given them.

  • I need help getting my Documents synched with my computer so I can save them... how does this work on the CENTRO?

    I've tried everything and the versamail on my palm doesn't work because of a glich so I have no way of getting my documents off my palm. It's really irking me that I can write on the go, but can't acess my stuff even when i'm at home.
    can someone help me figure this out?
    Post relates to: Centro (Sprint)

    Documents to Go synchronizes with the Documents to Go Desktop application, which is free bonus software you must download and install on your computer to establish the sync conduit. I don't have a Centro so I don't know exactly where on Palm you download it from, details should be on install CD or in Getting Started.
    Post relates to: Palm TX

  • The streamer (automatic updating) does not work with the last version

    the automatic updating of screens (streamers) do not work anymore with the new version. I use Windows sp3.

    the automatic updating of screens (streamers) do not work anymore with the new version. I use Windows sp3.

  • Printing from Elements 11 with a cannon  IP8750  I get horizontal banding right across the print .The printer operates for a distance of 10/12mm then pauses and it does this right throughout the print. it will print perfectly well from aperture, iPhoto an

    problems with cannon printing from elements 11 . Get severe horizontal banding from elements but not from other photo software help please

    Anyone?

  • How Does FXHome compare with the latest version of Motion?

    Motion is the only application in the FCS suit that I dont have much experience with. I suspect there are quite a few people like myself that would tend to put motion as a last priority when getting to grips with FCS.
    I've been spending some time looking at the FXHome website (http://fxhome.com/) and watching their tutorials. It looks very impressive for what you get for the money. There are a suit of applications that they bundle which appear to cover everything motion can do and a whole lot more.
    IS there anyone using the FXHome software with Final Cut Studio? I'd be really interested to know.
    thanks

    hi
    i dont know much about fxhome, but looking at the site briefly it appears to be a hole mess of products and add ons. it says it works with fcp and premiere, so i presume its a plug-in type thing? it seems to double up on a lot of the features of motion, and while some of them may be more features, i doubt it offers the flexibilty and power that motion offers overall.
    i'd say make motion a higher priority!
    adam

  • HT4413 I want to transfer about three thousand photos on my MacAir to my iMac. Any suggestions on the best way of doing this?

    I want to transfer about three thousand photos on my MacAir to my iMac. Any suggestions on the best way of doing this?

    Are the photos in iPhoto?
    If they are, you can simply copy your iPhoto Library (located in your Pictures folder) to a thumb drive or external drive and then copy it over to your other Mac. This will only work if the iMac has the same version (or later version) of iPhoto as does the Macbook Air.  Then on the iMac, if you want to combine this new library with the existing one over there, use iPhoto Library Manager (a free download program).
    If you want to copy over only a portion of that iPhoto library, iPhoto Library Manager can create a smaller library containing just the photos you want to include. Then copy that smaller library.

  • No access with SP Designer 2010 after change to FBA and Windows at the same time - Does this work with SP 2013

    Hi All,
         It seems you can't use SharePoint Designer 2010 to open a site if you have both forms and Windows Auth selected.
    Is there any way around this if i want to use the 2 at the same time?
    How does this work with SharePoint 2013 as i would be doing some migrations?
    Cheers in Advance

    Hi,
    As I understand, you encountered the issue after you selected both FBA and Windows Authentication at the same time.
    As I test, I can open the SharePoint 2010 site using FBA and Windows Authentication by SharePoint designer 2010. When you open the site first,
    you will get a dropdown menu where you can choose between the 2 authentication mechanisms.
    After you choose one of them, you can open the site.
    https://onedrive.live.com/redir?resid=40B702A9FB117DD!136&authkey=!ABtMg5n3OtPakCg&v=3&ithint=photo%2cPNG
    When I open the SharePoint 2013 site using FBA and Windows Authentication by SharePoint designer 2013, I also get
    a dropdown menu where I can choose between the 2 authentication mechanisms. I can open the site after I choose one of them.
    So I think there are some other reasons to cause the issue.  
    Check these things below:
    1. Check if you have the permission to open the site in SharePoint designer (Site Permission > Permission Level in ribbon > Click the permission you belongs to > Ensure Use Remote Interfaces is selected).
    2. Check if you have enabled the SharePoint designer to open the SharePoint site. (Select the web application hosting the site collection using the FBA and windows authentication >Central Administration website > General Application
    Settings > SharePoint Designer > ensure Enable SharePoint Designer
     is selected).
    3. Is there any error when you open the site in SharePoint Designer? If there are any errors, could you please provide it here for further research?
    More references:
    https://social.technet.microsoft.com/Forums/sharepoint/en-US/2a3c022c-f924-4b38-be02-5c5ac7a2927e/cannot-open-sharepoint-site-using-sharepoint-designer-2010-get-a-popup-with-4-possible-causes?forum=sharepointgeneralprevious
    https://social.msdn.microsoft.com/Forums/office/en-US/19628c53-fde2-44b0-806c-64f67263c931/cant-open-sharepoint-site-with-sharepoint-designer-2010?forum=sharepointcustomizationprevious
    Best regards
    Sara Fan
    TechNet Community Support

Maybe you are looking for