Looking for a student with experience from Victoria University, Australia
Hello,
I would like to meet anybody who could provide some more information about how is that to study at Victoria University, Australia and if that is possible for a man from another continent:))
Hope that does not sound that crazy,
regards Otto
Hello, thank you for the offer.
I have heard that your university has a strong SAP focused program and would like to know if there is any way one would be able for a distant studies... remotely of some kind. I am from Czech rep, Europe, know Paul Hawking and his effort he put into relationships with SAP, but don´t think it would be ok to just write him and ask a favour. So I thought I could find an ordinary man like me, who could point me to some resources or even people he/she knows in person and could recommend, because their interest could intersect with mine.
I think how crazy this sounds, but I believe I have something to offer. Be it SAP related or not. I have a master degree in computer science from a prestigious university in my country but could use to find some friends from abroad and could use a foreign degree. If you feel there is any way how to help or what to advise, please share your thoughts.
This cannot work without a personal interest if any of the teachers and even then it might not be allowed. I just want to doublecheck, because education is an important part of my life and knowledge sharing/ transfer is what we do on SCN. Maybe someody would be able to use my knowledge for the school benefit and would let me get a degree at the same time.
Thank you for your interest,
cheers Otto
Similar Messages
-
Looking for a designer with experience working on Motorsport projects
I am looking for a web designer with specific experience working on Motorsport websites. The project will be to design a BC site for a racing team which we will implement. If you believe you are qualified for a project like this please send me details of your portfolio and your rate. Note I am looking for someone who has actually worked on motorsport website, so will need to see evidence of this experience. If you do not have this experience please do not apply. Please PM me if you are qualified.
Hi Sir/Madam,
I recently Completed my PG Diploma Graduate in Industrial Automation and System Design from National Institute of Electronics and Information Technology (NIELIT) Calicut with 72.2%.I am good labVIEW Programmer and I am seeking job in labVIEW Sector, please help me where i could get the job in labview Sector.
Please find the attached resume.
Thanks & Regards,
Ravi Kumar
+91-9000324146
E-mail: [email protected]
Attachments:
resume ravi new formetpdf.pdf 65 KB -
Looking for a pager with advanced functionalities
Hello everyone,
I am looking for a pager with which I could put custom icons for the different workspaces.
I have an HTPC that is mainly used for three things: watching movies, playing music and browsing the internet. Therefore, I would like to have four workspaces, one for each of these and another one for administration. Since this is an HTPC, I'd like it to look good and I think it would be neat to have images instead of numbers/squares for the workspaces: a movie reel for the "movies" workspace, a note for "music", etc... I have been looking at pagers on the wiki, but most of the links are broken. I am currently running XFCE, but would install another WM for this. The idea came to me because I could do this on awesome 3, which is installed on my laptop, but my roommates are firmly opposed to a tiling WM on the HTPC.
If anybody can provide suggestions, they will be very welcome.
Cheers,
FrançoisHowdy-ha- flamirande. I don't want to be a total prick, as it's not my place; it's yours. Xfwm or Awesome will get the job done, won't it? You might be able to wow them if you get a universal remote and set up a proper lirc connection, letting them sit on the couch and have the power at the press of a finger. I have some friends with XBMC (the real thing--a dedicated, old-school Xbox hacked with BSD for all their media), and they're more satisfied with the results it provides than how it looks. Yeah, their Win and Mac PCs (both my friends' and your roomates') give them Facebook and YouTube, but yours gives them music, movies and tv and internet on demand, at a smaller resource cost and with a more versatile core and interface. If they're so touchy about polish, let them figure it out. I'm not just saying this as the sorry excuse for a computer geek that I am, but also as a person who's been dealing with many roommates for roughly a decade. I mean I don't know your situation but what do they think, the setup you give 'em is supposed to get them attention?
If these folks can't be satisfied by the fact that your system can provide them with a reliable, versatile, centralized, kick-ass setup that theirs can't, well...
More constructively: If they just won't have it...maybe openbox and tint2? You've got a low ram and cpu demand there, keeping music from skipping and video from tearing, if you work it out properly. Openbox has always been my choice for the right balance between polish and minimalism. -
I am looking for a cable to go from my Ipad mini to my epson xp 400 printer.
iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
iPad Power: How to Print
http://www.macworld.com/article/1160312/ipad_printing.html
Check out these print apps for the iPad.
Print Utility for iPad ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
Print Agent Pro for iPad ($5.99) http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8 Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
FingerPrint turns any printer into an AirPrint printer
http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
Cheers, Tom -
Looking for sample template with the check on the bottom of the page
Customer is looking for sample template with the check on the bottom of the page, anyone know of one? Their Bank doesn't like the check on the top of the page because when you rip the check from the stub is sometimes rips the microline. -Thanks
Hi Dale,
Check this one(template attached) : http://blogs.oracle.com/xmlpublisher/2006/04/13/#a12
You just need to flip the invoice and check position,..
regards.. -
Looking for a printer to print from iPad. I like canon. I have iOS 5.0.1
Looking for a printer to print from IPad. I like canon. I have iOS 5.0.1. What are people using.
This article has a list of all AirPrint capable Canon printers: http://support.apple.com/kb/ht4356
-
Info Reqd regarding Victoria University, Australia
Hello,
I am interested in doing my MBA in SAP. As far as I have Googled I have found that Victoria University at Melbourne, Australia offers MBA in ERP and Information Systems. Can any of you share some details regarding the University, expenses involved during the stay and other vital information that I have missed asking.
Thanks,
VivekHi,
There has been no convincing replies from the university officials. I have either got OUT of OFFICE replies or brochures which are available in the web link. I had a thought and was looking for Proff/Student/Ex-Student of the Univ to brief me about the process.
Thanks -
I am currently recently graduated from the University of Technology in Belfort-Montbeliard (France).
Master’s grade of “Electrical and control systems engineering”.
I am currently looking for a job in automation, control systems and electronic domain (I prefere LabView Developpement)
Salim DARWICHE
1 rue antonin artaud
31320 castanet tolosan
Tel: 0033.6.85485107
Email : [email protected]
Nationalities :
- French
- Lebanese
Date and place of birth:
April 18, 1986
Toulouse,
France
Education
2009
Master in Electrical and Control Systems Engineering
Option Embedded
systems
University of technology of Belfort-Montbliard france
2006 University
Diploma in Industrial and Maintenance Engineering
DUT Degree Equivalent to 3 years of
technical studies
Institute of technology of Saida
Lebanon
Experience
February
July 2009 Galley-Technologies (Neuchatel-Switzerland)
Mission:
Development of
Labview Modules for Pharmaceutics and Robotics
industries
Realization(s):
Communication and data-Analyse Software using
TCP/IP:
- Development of a software (Labview Programming) that would permit data
transfer between many pharmaceutical ovens, in order to analyse all production cycle, and test
the conformity of the final products.
5 Axis robot simulation software:
Concept and development of simulation tool for a robot working cycle
September 2007
February 2008 Valeo VSS (Paris France)
Mission:
Qualification and management of
automobile electronic components
Qualification of specific electronic components
Making sure that all electronics components will be qualified on time before the
Start-of-Project
- Discussion between me, Valeo supplier and Valeo Project Manager in order
to grant Valeo quality standard Specifications or to approve supplier deviations.
Management of electronic qualification documents on Valeo ePLM system.
- Participating to
daily quality reviews meetings and brainstorming in order to apply a PDCA (plan Do Check
Act)
Management of Valeo DSA products under IMDS Base
- Management and
declaration of Valeo Division Systems Access products under IMDS base (international Material
data systems)
- Creating MDS sheets then sending them to Automobile
Constructors.
February June 2006 United-Group Machinery
(Beirut-Lebanon)
Mission:
Renovating a bag-filling
machine
Realization(s):
Mechanical system
- Drawing all parts of
the machine (3D), assembly and motion using Autodesk Inventor.
- Unmount, replacing bad
parts then assembly of the machine.
- Integrating of a weigher machine to the top of the
bag-filling machine.
Control system
-Removing old control system and
integrating a PLC and a control panel
-Programming the PLC (Delta type) with Ladder
diagram.
Knowledge
Languages
French
and Arabic: Native languages.
English: fluent, TOEIC 890/990 Test of English for
International Communication.
Spanish: Intermediate.
Automation
- Labview,
Matlab Simulink
-Programming DSP Controller TMS320LF2407.
-Programming in languages:
assembler, C.
- PLC Programming (Crouzet, Delta, tlmcanique, Moller) -Ladder, List,
Grafcet-
-Controlled systems: Continuous aspect
Electronics
-Programming in
VHDL.
-Programming of PIC 16F87X.
-Simulation (Simplorer, Circuit maker, Electronic
Workbench, Proteus, Kicad).
Electrical
- Machines D.C. current, synchronous,
asynchronous, electrical supply networks.
Various
- CAD: AutoCAD, Autodesk
Inventor, Mastercam, Programming of machines with numerical control CNC (languages Num, Fanuc,
Fagor).
-CAM: Ms-Project (Gantt, Pert, Kanban)
Message Edité par salimo le 11-04-2009 04:35 PM
~~~~~~~~~~~~~~~~~~Looking for a LABVIEW JOB (In EUROPE)>~~~~~~~~~~~~~~~~~~
**The Best Way To Predict**The**Future Is To Invent It**
Attachments:
CV_Salim_Darwiche_S_12_10_09.doc 77 KB
CV_SalimDARWICHE_EN_S.doc 229 KBMessage Edité par salimo le 11-04-2009 04:36 PM
~~~~~~~~~~~~~~~~~~Looking for a LABVIEW JOB (In EUROPE)>~~~~~~~~~~~~~~~~~~
**The Best Way To Predict**The**Future Is To Invent It** -
My company is looking for a consultant with NKE experience
Hi
My company need to write an NKE in order to port our product to OS X. We've studied the documentation and example NKE projects and know what to do and how to go about it.
However, that's in theory, when developing for an OS on which you have no experience its always slower, and obstacles are encountered, and you can't be 100% sure the design is optimal, or won't create unanticipated problems.
So we're looking for somebody with proven expertise in developing NKEs who may be interested in some paid consultancy work on a per-need basis, activities could be design review, code review, guru to ask questions if something unexpected happens etc.
We're based in Vancouver, Canada. If there is somebody nearby in the Pacific Northwest that would be ideal as it means face to face meetings are possible. But this isn't essential.
If you might be interested drop me a reply.niuniu wrote:
We're based in Vancouver, Canada. If there is somebody nearby in the Pacific Northwest that would be ideal as it means face to face meetings are possible. But this isn't essential.
Hey, don't you need a favorable market opinion letter from the HRSDC before you can hire a non-Canadian? -
Looking for LabVIEW Developer with 2-3 years of experience for Mumbai based Company
Software Plantation, Mumbai is currently looking for LabVIEW Developer who can contribute to the development of automated test, data acquisition, and control systems using National Instruments LabVIEW.
This position is located at Lokhandwala, Andheri West, Mumbai.
Requirements:
Applicant must meet the following criteria:
2+ years of LabVIEW experience.
Should be from Engineering background.
Knowledge of various communication protocols like RS-232, Modbus, USB, etc.
Knowledge of NI DAQ hardware boards.
Automated test, measurement, data acquisition, and/or control experience.
Good at documentation.
Knowledge of Software Development Cycle
Must be able to meet objectives as directed.
Ability to effectively work independently.
Ability to contribute and work in a team environment.
Ability to adapt to changing requirements, rapidly absorb new concepts, and apply them effectively.
Good communication skills.
CLAD certified developer will be preferred. Knowledge of C/C++, Linux is an added advantage.
If your background and qualifications match this position, please send your resume via email with subject line as: 'LabVIEW Developer Application'.
E-Mail: [email protected]
Note: Please do not post your resume on the job forum. Mail it to the above mentioned email ID.Kindly send me your resumes on [email protected]
-
Looking for: UA members with Student SAP User Group
UA Professors in North America:
Does your campus have an offical SAP student user group, ERP special interest group or similar? If you do, please post with a brief description of what that group is / does.
In the next month I would like to organize a conference call for the schools with these SIGs to understand what member schools are doing, how the groups are organized, how the groups are (or are not) affiliated with your SAP initiative on campus, what works / doesn't work for your students and so on. Students at member schools have more and more interest in starting these groups - and we'd like to be ready to share best practices! Our colleagues at ASUG are interested in this topic as well, and will join us for the call.
Thanks for sharing!
Best Regards,
HeatherCentral Michigan University has remained active since Dr. Andera's last post (9/29/10). We fulfilled our goal of visiting Cargil and 3M this past March 2013 in ST. Paul/ Minneapolis.I attached a couple pictures of our visits to 3M & Cargil. It was a very rewarding experience that allowed us to present our program to each company in depth. This trip taught us as group many things. We have also gone to multiple ASUG meetings including Grand Rapids, and Detroit. We are currently invited to the ASUG-Illinois Meeting on Nov 1 at Harper College, and will be hosting an event in the fall here on CMU's campus in Mt. Pleasant, MI.
As a group we have weekly meetings including guest speakers and SAP TERP10 training sessions. Our group has now reached 100+ students and continues to grow each year. There are many things we are doing that attract new students.
For instance, this past year the Information Management Institute here on campus conducted the 1st annual ERPSim. An annual invitation only competition challenging the best ERPsim teams in a competition to determine which team has developed and implemented the best business strategy for the ERPsim Game. Twenty teams of four students and one mentor competed head-to-head for the Top Honor of ERPsim Champion. The top five teams were rewarded with scholarship money and plaques.
So to answer your question, Central Michigan University currently has a very active SAP UASUG , and it only continues to grow!
If you have any further questions, please do not hesitate to ask, I am the president of the group here at CMU and would love to help you. Just email me at [email protected] -
If you wish to apply send resumes to: [email protected]
Position Summary:
Systems Engineer with experience in LabVIEW development, instrumentation interface and system control. The engineer is expected to develop the software and GUI, select and integrate necessary instrumentation to meet requirements and properly document design. In addition, the engineer is expected to be able to specify electrical and electronic interfaces necessary in the development of a system.
Essential Job Functions (listing most important first):
Will develop the software and GUI necessary to implement a data acquisition and control system.
Will select appropriate hardware instrumentation and control interfaces and integrate OEM and in-house equipment.
Will provide guidance in the development of electrical interface, schematic and wiring diagram of systems.
Will use electronic test equipment (Voltmeters, oscilloscopes, etc.)
Will generate software documentation such as requirement document, user manual, test procedures, test reports etc
Essential Job Requirements:
EDUCATION
Bachelor degree (BS) in computer, electronic, or systems engineering or a related technical discipline.
EXPERIENCE
Experience in LabVIEW development. Experience in PXI, DAQ systems, RS232 communications preferred. Five or more years of related experience.
REQUIRED SKILLS
Able to develop the software and GUI necessary to implement a data acquisition and control system.
Able to select appropriate hardware instrumentation and control interfaces and integrate OEM and in-house equipment.
Able to understand schematic and wiring diagrams.
Able to use electronic test equipment (Voltmeters, oscilloscopes, etc.)
Generate software documentation such as requirement document, user manual, test procedures, test reports etc
PREFERRED SKILLS
LabVIEW, Control & DAQ instrumentation, Serial CommunicationsHi Andre,
You may get more success if you post to this forum:
http://forums.ni.com/ni/board?board.id=JobPost
Ray
( tbob, are you busy these days? )
Message Edited by JoeLabView on 11-09-2005 12:40 PM -
I'm looking for a computer with these specifications, can anyone help me?
I need to know if anyone can give me the names of a few laptops that have these MINIMUM specifications:
Intel Pentium 4 or AMD Athlon 64 Processor or any better processor
4 GB of RAM
Windows 7
1280 X 800 or more with qualified hardware-accelerated OpenGL graphics card, 16 bit color, and 256MB of dedicated VRAM (not Shared Memory)
Graphics support for Shader Model 3.0, and OpenGL 2.0, DirectX 9-capable graphics card.
DVD-drive compatible with dual-layer DVDs, Read/Write drive
QuickTime 7.6.2 or newer
I'm going to an art school, and will probably be getting into some Graphic Design stuff, so if you don't know a computer that has a lot of these specific terms, could you give me perhaps a few names of good laptops for art students to buy?Hello Balkoth,
I work for Intel and aside from this being my job, I'm going to tell you to consider investing in a stronger processor. If you are going to be getting into Graphic Design, you will need more processing power. For your needs, I would suggest looking into the new Intel® Core™ i7 processor.
This is our top-of-the-line processor, ahead of the curve and will continue to perform as technologies continue to emerge. Not only will you have graphics support for Shader Model 3.0, and OpenGL 2.0, DirectX 9-capable graphics cards, but the i7 has Turbo Boost Technology (Speeds up your processor when you computer needs more performance) and Hyper-Threading Technology (multitasking that allows your computer to work on two tasks at the same time). Even if you don't need all of these features now, you never know what you will need down the line. My general rule of thumb is to never buy something that is already behind the curve.
I would also recommend you looking into our other smart processors, i3 and i5, but I believe the i7 will be the best for your processing needs. Here is a couple computers I found with i7 processors and Windows 7 that you were looking for. Hope this helps!
Intel- Sponsors of Tomorrow
Dell Studio Laptop with Intel® Core™ i7 Processor - Black Chainlink
Model: S1747-3209CBK | SKU: 9718895
Watch your favorite movies in high-definition or create customized CDs and DVDs with this laptop's DVD±RW/CD-RW drive with Blu-ray Disc support. The built-in 2.0MP webcam and 17.3" high-definition plus display are handy for video chatting with friends and family. Windows 7 Home Premium preloaded Which Windows 7 edition is best for you? Compare.Learn more about Intel® processors. Information provided by Intel.
4.7 Read reviews (65)
Sale: $949.99
Toshiba Satellite Laptop / Intel® Core™ i7 Processor / 16" Display - Slate
Model: A665-S6070 | SKU: 9992966
This laptop features an Intel® Core™ i7 processor, 4GB memory and a 640GB hard drive for fast computing and ample file storage. The 16" widescreen TFT-LCD display and NVIDIA GeForce graphics provide a crisp, clear picture.Windows 7 Home Premium preloaded Which Windows 7 edition is best for you? Compare.Learn more about Intel® processors. Information provided by Intel. Take a product tour.
1 Read reviews (1)
Sale: $899.99
Apple® MacBook® Pro / Intel® Core™ i5 Processor / 15.4" Display - Aluminum
Model: MC372LL/A | SKU: 9911539
Video chat with friends and family using this laptop's iSight webcam with omnidirectional microphone and 15.4" widescreen display. Enjoy high-speed wireless access via the built-in AirPort Extreme wireless network connection.
5 Read reviews (5)
Sale: $1999.99
I am an Intel employee and state that my opinions are my own personal opinions and are not made on behalf, or to represent, Intel. -
Looking for help-DVD with web/email links
Hall writes...
"snip...DVD@ccess is actually quite limited and not entirely compatible with the range of DVD playback software/hardware available on a PC... you might be better off using eDVD from Sonic (which is PC software, making use of the Interactual Player, rather than @ccess)."
I've no experience with Sonic yet but there is a small project in Chicago that needs help immediately. I'm looking for leads to pass on.
[email protected]
ThanksWell, there's the rub.
If you use DVD@ccess then pretty much every Mac will run the software easily enough, but you have to install it on a PC and even then it doesn't work as it should in a lot of cases.
If you use eDVD then PCs will almost certainly already have the player installed (since it is a far more ubiquitous piece of software than @ccess, and is used by a high number of commercial discs already in circulation), but you'll need to install the Interactual player on the Mac...
There are probably going to be far less Mac users than PC users - which might indicate that you go for eDVD and a more PC friendly solution.
But don't be fooled - eDVD is not the saviour that we all hope it will be. There are still issues on some PCs with it, and as you have already found, some issues on a Mac as well. The thing to consider is whether the eDVD solution gives more compatibility overall with your target users than DVD@ccess will.
You could opt for a more simple solution and just place the documents that you want included into a ROM folder on the disc, then use a menu to explain what's there and how to get to it.
The strong advantage here is that you'd have to create that menu anyway for those who view the disc in a set top player, and you are also not trying to post edit your files (as eDVD requires) or use software that simply isn't good enough on PCs (as @ccess seems to be).
It may be a less elegant and less gimmicky option, but I'll bet hardly any of your users will know the difference anyway... -
Paid Project: Looking for some help with the AddressBookUI Framework
I am looking for someone with experience accessing contacts using the AddressBook related frameworks. I am able to call up the contacts modal view using the ABPeoplePickerNavigationController, but am having problems accessing the variables in the "person" "property" and/or "identifier" properties.
I am working from within the shouldContinueAfterSelectingPerson:person:property:identifier method. When the user taps on a phone number or other element in the picker, I want to pass the information as a string to a variable in my program.
If someone knows how to do this, and can help, let me know. I would love free advice, but also don't mind paying for your time. If I can get past this thing, I can move on with the rest of the program.
Many thanks.Looks like I have it covered. Thanks to those that responded.
--Mike
Maybe you are looking for
-
Problem to retrieve a Quantity Total using PLD in a Sales Order
Hi, I'm working with PLD, and I'm managing a Sales Order. I have three line, the first one is a Bill Of Material with two 'sons', and the other two are their sons. I have 1 qty for all the lines, and when I print the preview with PLD, the sum of the
-
Java.lang.IllegalStateException: duplicate Id for a component
Hi everyone, please I'm really having a serious issue on the duplicate id for a component in view. I have a page of which I used the <jsp:include> tag to add to some pages of my application. The page have the following code snippet in it <%@taglib pr
-
Displaying thumbnail images inline with a report
Hi, I have a table with data and one column which is a text image filename. This image file resides on another server. I currently have a cgi that takes the image filename as a parameter and returns the image be viewed in a browser. I've been able to
-
I am getting this message"bootcamp x64 is unsupported in this computer model" when I try instal it. Please help.
-
Calling Forms/Reports from a button
How to call a Report or a Form which had been developed using the Wizard from a button created in a region of a page flow? National Steel Harirajan