Looking for A Suitable Container o.0

Really trying to figure out an appropriate way to open up a new frame or something based upon the clicking of a button located in a JPanel, the panel located in a tab.
Boy did I have some interesting results when I tried using JInternal Frame!!! While quite humerous, definately not the answer! I would use JDialog but I need to be able to add JRadioButtons or some other method to select a specific catagory of entry as well as the input itself, and it doesn't look like JDialog can do much.
Thank you if you have any ideas!

Thanks for you suggestion Gnomish8.
However this hub would only plug into one of the MacBook's USB ports. Therefore it would not provide any extra power. I need the extra power (hopefully provided) by plugging into both USB ports at the same time.

Similar Messages

Looking for the right container

I hope I can describe this accurately. I am looking for a
container similar to a panel, but with its right border
transparent. The appearance I hope to achieve is something like a
sidebar which will slide from the side of the parent control panel
on creationComplete.
Any ideas of a possible container would be
appreciated.

Or if you like it quick and dirty you could mess up a Panel
by adding a mask to it; something like this:
<mx:Canvas id="mySliderThingy" left="50" top="20">
<mx:Panel height="120" title="Something panel-ish"
mask="{themask}">
<mx:Label text="Perhaps not the best idea of all times,
but still..." />
</mx:Panel>
<mx:Canvas id="themask" left="10" height="100%"
width="100%" backgroundColor="#123456" />
</mx:Canvas>
Probably not a very GOOD idea, but it is an idea... ;-)
hth / Culme

Looking for a suitable slideshow for website

Hi I'm looking for a slideshow similar to the one that I have on the frontpage of my website:
http://naturallandscapeandirrigation.com
I'm looking for something that looks similar (simple and has the thumbnails) but I have more control over the settings (autoplay and slide transition times, etc). Are there any that are available? Thanks

MENUS:
jQuery Superfish works in IE10 and Touch Screen devices
http://users.tpg.com.au/j_birch/plugins/superfish/
SLIDESHOW:
jQuery Cycle2 has much improved support now for thumbnails and other cool stuff.
Carousel demo
http://jquery.malsup.com/cycle2/demo/caro-pager.php
Prev/Next demo
http://jquery.malsup.com/cycle2/demo/prevnext.php
Nancy O.

ODD on my Satellite L550-11J is damaged - looking for new suitable device

hello,
the dvr device of my toshiba satellite L550-11J (bought in 2009) with windows vista 64 seems to be broken. it is a "pioneer dvd-rw dvrtd09a". it doesn`t show on windows anymore, not in the explorer, not in the device manager (if this s the english name of it, i don`t know, i am german speaking). it doesn`t even show in the bios or boot device, so i think it is not a software problem but the hardware is broken.
which new dvr device is suitable for my notebook? i cannot find the same dvr device on amazon or elsewhere to buy, so i guess i need another one that suits.please help.
best wishes
no-idea

addendum:
sometimes, the dvr device is back for a little while, but 90% of the time it is not recognized. i guess it has a defective contact. i already took it out, blew into it and but it back in. no result. it has power and it can be opened and closed. cd`s that are put in are turning for a few seconds, than it stops.
when the device is gone, it cannot be found in the bios!!!

When i go to update itunes i get an error message that says "the feature you are trying to use is on a network resource that is unavailable and look for a folder containing the installation package itunes.msi" but i cant find the folder.

its really starting to get to me i cant even install a new itunes or delete the last one. please help!

You're not alone. I'm having exactly the same problem. I am running Windows XP version 2002 and cannot uninstall Itunes or update. This problem is affecting my ability to sync music and also with playback. The support for PC users is severely lacking. I'm also getting error messages that says an older version of Bonjour cannot be uninstalled. Help!

Look for a filename containing a Wildcard (how to?)

My program enters a loop, and when a certain file is found, the loop exits and resumes duties. The file will start with "Pos_" or "Neg_" or "Warn_" then have some arbitrary junk, before suffixing in txt. So... how do I search for a filename with a wildcard? The attached JPG is how I'd like to do it, (and this works fine if the filenames are constant) but of course it doesn't work for the wildcard.
Richard
Attachments:
wildcard.jpg ‏58 KB

Thanks for the response Mads. I'll give that I try. I'm horrible at arrays, I tend to keep everything flat. Probably stoopid in this case.
Richard

Looking for a suitable "long" USB 3.0 Y splitter that fits 15 inch retina.

Hello,
The Macbook Pro retina has it's two USB ports on opposite sides of the keyboard. I wanted to use a USB 3.0 Y splitter cable, but the only ones I can find have a rather short Y split - probably as USB ports are usually situated beside each other. But for the 15 inch retina, the Y split cable length needs to be 20 inches or 50cm long - otherwise both ends cannot be plugged in at the same time.
Does anyone know of any source for a Y split USB 3.0 cable with a long Y split? I live in Europe (UK).
My reasons for wanting this:
I have a Seagate Desktop USB 3.0 hard drive dock which runs from mains power and USB 3.0. The hard drive sits on a small "dock" and is removable. The dock has a normal SATA connection for the hard drive and USB 3.0 plus power at the rear.
I wish to plug in an SSD drive instead of the drive it comes with (3TB desktop size). I have tried this and it works really well, and it is much much faster.
However I want to use this in a field situation where I need the SSD for speed but will not have access to mains power. So I wanted to try and run the dock using USB 3.0 power only. It does not power up using only it's supplied USB 3.0 cable, but I wanted to try a splitter Y cable and see if the power from 2 USB 3.0 ports would work.
I have tried this technique with the Seagate Thunderbolt desktop, but it will not run with just the thunderbolt cable - even with only an SSD connected.
I had success using SSDs with the Seagate GoFlex Thunderbolt (which is bus powered only), however I wanted to use larger SSDs i.e 1TB and had read that this device had trouble proving enough power consistantly.
Before I purchase an expensive 1TB SSD I wanted to see if I could power up the dock using USB 3.0 alone.
Thanks for any help :-)

Thanks for you suggestion Gnomish8.
However this hub would only plug into one of the MacBook's USB ports. Therefore it would not provide any extra power. I need the extra power (hopefully provided) by plugging into both USB ports at the same time.

Looking for a more suitable animation tool

I've been creating animations from sprites in After Effects, with mixed results. The input is a number of pixel art sprites (exported from elsewhere), and the output is a video, characters running around and interacting. I have AFX doing quite a lot, but it's very awkward and I'm pretty sure it's the wrong tool for the job. Can anyone either suggest better approaches, or more suitable software? I'll describe what I'm doing now:
- Many sprites are bodies or heads to combine, eg. a smiling or angry faces and walking or standing bodies. I set the head position for each body sprite, so any head fits in the right place on any body (trivial rigging), then apply it with a script, so I can change the body and the head moves to the right place automatically.
- Some sprites have multiple layers. For example, while heads are normally on top of bodies, a body may have an arm raised, which needs to be above the head instead of below it. I can create the extra layer for the body separately, and it works for any head.
- I can set the draw order per-layer. Usually, one character and all of its parts is drawn on top of another--body1, head1, body2, head2. But, if two characters collide, handshake, or interact in other complex ways, I may want to draw both bodies, and then both heads, even though the heads and bodies are still anchored normally. Some sprites may have multiple layers, eg. body, head, hands, legs. (Z position hack...)
- Individual layers can be adjusted separately, eg. to adjust the default head position downwards to give a nod.
- Some sprites are hue shifted (hair color, clothing color) or have more complex adjustments applied, so I can reuse more sprites.
(I'm only describing what I'm doing and not how. I wrote more detail about what I'm actually doing in AFX and the specific issues I'm having, but it was too long and people can probably already guess the practical issues of using AFX like this. I'll post more info if anybody asks.)
The result is functional, but a real hassle to actually work with. AFX is a compositing and effects tool and it's not really designed for animations, and only its scripting support has let me abuse it this much. I don't know of a better tool, though--searches for animation tools mostly come up with things like Spine (authoring individual models for importing into games), and nothing suitable for creating complex video animations from sprite sets.
There are probably many tools to do small pieces of this (sprite animation sequences, effects, scene animation, camera), but I'd really like to not split into a multi-tool workflow, since I want to experiment freely with a scene, not lay out an entire scene and then create it start to finish. Does anyone have any suggestions (or better places to ask)?

There are many other DTP applications:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=137&mforum=iworktips ntrick
You have to be more specific about what you are looking for.
Peter

Looking for suitable gps app for iPhone

I'm looking for a recommendation for a suitable app for my phone. I'd like a GPS program that points me to how far away a point is and in which direction.
Basically, my Dad, before he died, had a proper GPS and programmed in some of our family relatives for when he was sailing. Now he's passed on I like the idea of where he and some other relatives are buried and I'd like something that, wherever I am, can tell me that, for example, my Dad is X miles away and in which direction.
I'm not looking for a routemaster app or anything more complex.
I can't see anything suitable - is there something out there that can do this?

Check out MotionX-GPS in the app store or at their web site (http://news.motionx.com/category/motionx-gps/).
You can enter waypoints in a number of ways, and once you have saved on, you can use their "search wheel" to follow a track you've recorded, get range and bearing to a waypoint, point to a lat/long coordinate. It takes a bit of time to learn, but it is a pretty cool app.

Attempting to upgarde itunes and I get an error message looking for "an alternate path to a folder containing 'iTunes.msi' location. I've searched my hard drive and the file doesn't exist. What to do?

Attempting to upgarde itunes and I get an error message looking for "an alternate path to a folder containing 'iTunes.msi' location. I've searched my hard drive and the file doesn't exist. What to do?

This worked...found on a prior discussion:
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page)...
http://majorgeeks.com/download.php?det=4459
From the link above (near the top of the page)....Under 'download locations' click on 'download@majorgeeks'
To install the utility, doubleclick the msicuu2.exe file you just downloaded and ran.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Restart your computer.
Re-download Itunes (latest version form Itunes website) and install. It worked!

Foreach Loop Container with a Data Flow Task looking for file from Connection Manager

So I have a Data Flow Task within a Foreach Loop Container. The Foreach Loop Container has a Variable Mapping of User:FileName to pass to the Data Flow Task.
The Data Flow Task has a Flat File Source since we're looking to process .csv Files. And the Flat File Source has a Flat File Connection Manager where I specified the File name when I created it. I thought you needed to do this even though it won't really
use it since it should be getting its File name from the Foreach Loop Container. But when attempting to execute, it is blowing up because it seems to be looking for my test file name that I indicated in the Flat File Connection Manager rather than the file
it should be trying to process in User:FileName from the Foreach Loop Container.
What am I doing wrong here??? I thought you needed to indicate a File name within the Flat File Connection Manager even though it really won't be using it.
Thanks for your review...I hope I've been clear...and am hopeful for a reply.
PSULionRP

The Flat File Connection manager's Connection String needs to be set to reference the variable used in the ForEach Loop:
Arthur My Blog

Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY . Looking for solution.

Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY . Looking for solution.

Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
First, empty the Trash, if possible.
Triple-click anywhere in the line below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ 2>&- | wc -l | pbcopy
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign ($) to appear.
The output of the command will be a number. It's automatically copied to the Clipboard. Please paste it into a reply.
The Terminal window doesn't show the output. Please don't copy anything from there.

It it possible to look for a page that does not contain a string?

Is it possible in the search feature in Dreamweaver CS3 to find all pages that do NOT contain a specific string?

I don't think so, at least not directly. I could be wrong, Regular Expressions can be pretty powerful, I'm not sure how well they're implemented in CS3 though: http://www.adobe.com/devnet/dreamweaver/articles/regular_expressions_pt1.edu.html
Maybe you could do a find/replace of that specific string, with itself.
All of the files that have it would be updated without actually changing the code.
The Date Modified for the file would change though.
The files without the string of info you are looking for would have the old modification date.

Looking for a usable GUI Designer/Container...

Hi all.
Since a while, I'm looking for an integrated environment to develop and execute Java/Swing GUI and it seems it's not possible to find such a thing...
I explain : we are developping lots of J2EE applications hosted in a well known Application Server, and for what concern server, we can find 'on the shelf' almost all we need. Thus, using Session Beans, EJB3, Spring (...), it's pretty comfortable to build professional applications.
But generally speeking, these applications have a graphical part, and at this point, things become more complicated. For years, we have been using only Java, for both server and client part (Swing, even in its firsts versions... souvenirs...). But even after 10 years of Java, it seems that it is still not possible to find a tool in which we can design, test, deploy and execute our GUIs.
Since Matisse appeared, it is a little bit easier to design panels (but not so trivial... JFormDesigner has released a beta version supporting the GroupLayout : still lots of bugs) but for what concern, let's say, the 'GUI Container' part, it seems that market/open source has no answer. I tried Netbeans RCP (and also Eclipse...), but these containers have been thought for IDE, and concepts are not easy to map on a standard GUI. Moreover, these containers are huge and not so easy to understand, so very often, the decision to build full custom applications is taken, re-writing for the 1000th time the main window, the menubar/toolbar management, the MDI controller (using sometime a docking framework), ... Thus, the cost of the development and the baseline is high, and of course, our clients are dissatisfied.
Recently, a new way of developping applications appeared : server part is developped using Java/J2EE, and the client side (fat client) is made using .Net. Interop between client and server leans on WebServices or binary interop (JIntegra).
I'm totally convinced that this kind of architecture is a mistake, but it's more and more difficult to defend Java on the client side. C# tools seem to be easier to use, more productive, ...
So my question is : what are your opinions/experiences on this subject? Have you found "the magic tool", "the magic framework", ... that make of Java/Swing a good challenger for desktop developments... or do you think that the game is over, and that Microsoft .Net has definitively won the client?
Thks for your answers!!
Rd

I believe it is not about winning and lossing. Its about learning. By the way, let me mention that God who is the mastermind of all variations is a God of diversity. Every diverse expression of whatever kind is a reflection and coextension of its maker -and that means that even you are a coextension of Himself.
Perhaps, if you are really looking for a tool that would satisfy your demands or desires along with Java, isnt it not logical to say that... or shall I say "perhaps" God is leading you into that new expression of diversity -a diversity that will challenge the whole creation? I dont blame others with what I cant do for myself.
One saying says,
"Seek and you shall find; Knock and the door will be opened to you; Ask and it shall be given you." The shorter way of saying it is..."Be patient and you will be satisfied."
If the clients lost patience. Make them understand how complex it is to make a java application. They will appreciate your wisdom.
Well nothing is impossible. The best part of your mind [one variation of the others] will always suggest: "All things are possilbe".
Therefore, do not despise what God is blessing.
Oliver Bob Lagumen
Newbie in Java

We look now for a suitable condition type "deposit for loaned packaging"

Hi,
Following is my client reuirement,
We buy a lot of raw materials in loaned packaging (drums or IBC). The
vendors are invoicing the packaging as an extra item on their invoice.
Weeks or months later when we return the packaging to them we get a
credit note.
We look now for a suitable condition type "deposit for loaned packaging"
which refers to account 631010 and we can use in the purchase order.
Can you create such a type ?
Please any one tell me whether it is possible? If yes, then which way?
Regards,

Hi Ajinkya1788 ,
you can use a condition like FRB1 with a provision account key for your 631010
or set up a valuation class to determine that account.
You might want to check empties management documentation in help.sap.com
best regards,
Edgar

Looking for A Suitable Container o.0

Similar Messages

Maybe you are looking for