Looking for a tutorial to make a paint splash

I'm looking for a good tutorial to make a paint and water splash. It can be either for photoshop cs6 or illustrator cs6 or both. If anybody knows of one, I would appreciate it. p.s. I'm not looking to use a scatter effect. I'm looking for the glossy splash effect.

>>Have you tried googling »photoshop tutorial splash«?
Yes and variations such as paint splash and water splash.
>> many tutorials may utilize photographic images as the basis of splash-effects<<
Yep that and scatter effects is all I can find.

Similar Messages

Look for XML Tutorial

Hello,
I am looking for a tutorial on laoding external images using
XML. I created a menu with flash that lists catagories for products
and a marketing banner with in the fash movie.
I need to take those images and place them outside of the
flash movie so the client can update the products or the image for
the banner and also to reduce the size of the Flash .swf.
I am not having anyluck finding a tutorial that will help me
with this. I have downlaoded the XML basics from gotoand learn.com
but it just was not what I am looking for.
Thanks for your help in advanced,
invtech

Ok, I don't yet see the underlying algorithm, but I am still
looking.
Tracy

Looking for a way to make comments in Purchase Orders

Dear All,
I'm looking for a way to make comments in purchase orders, in a way that
a) such comments should not be visible for vendor
b) such comments to be visisble in MIGO... (during GR ex.)
thanks in advance for help
Regards,
Andrey

Hi,
I think you can always enter the text during GR creation. But seems no text flows from PO to GR during its entry.in the PO the texts maintained in the PO will be the additional info to vendor.
Regards,

Looking for a good movie maker app for iPad 1

Hi Everybody-
I am looking for a good Photo/Movie maker for the iPad 1. Something that I can add Photos/Movies together and add some songs and have editing capabilities for all of it and possiabily export it as well to my PC to burn to DVD/CD.
So if anybody can give my recomondations, I'd really appriciate it.There some good ones, but not for the iPad 1. So I wanted to get all of your suggestions so I can narrow down my search. Please let me know if you need further information as well.
Thanks so much for your time.
Sincerely- Douglas

There are no movie maker apps in the App Store that will work well on the iPad 1, it just doesn't have enough RAM. If you read the reviews for the Avid app in the App Store everyone with an iPad 1 is complaining about it. iMovie, as you probably already knew, does not have a version for the iPad 1.
Wait for the iPad 3 and then set about making movies, the 1 (which I also have) just does not have the horsepower for what you want to do.

I am looking for a tutorial I had found a few days back on Tabular data display in Flex

Hi,
I picked up Flex programming a few days ago and I was learning about data grids and tabular display of data. I came across a tutorial with code samples that showed how to 1. display information in a tabular format.
2. how to read that information from a xml
3. how to show more information if a item in the tabular format is selected.
the tutorial used gamers and their preferred games as tabular data items and once an item is clicked it showed the game publisher info and some detailed information as text. I am looking for this particular tutorial again and not able to find through google search
Could you please help me discovering this article again?
regards,
Ram

Found it.
http://www.switchonthecode.com/tutorials/flex-fun-advanced-datagrid-topics

Look for JDeveloper Tutorial with samples code

Hello All ,
my name is Ron ,
i'm new user of JDeveloper i'm looking for a place to start a tutorial "How to use
the JDeveloper ? " with samples code .
from very basic use ( Hello world program ) to addvanced programming ( Like GUI Forms and Database )
please show me links where to start learning from
thanks in advance

The tutorials in the JDeveloper help system are a very good place to start. Choose Help | Help Topics from the JDeveloper menu then click the Tutorials book in the Help navigator. The tutorials are also available on OTN, see:
http://otn.oracle.com:8877/jdeveloper/help/
You may also find the 'how to' documents and samples on OTN helpful:
Oracle9i JDeveloper How To Documents
http://otn.oracle.com/products/jdev/howtos/content.html
Oracle9i JDeveloper Sample Code
http://otn.oracle.com/sample_code/products/jdev/content.html
Hope this helps.
- jon

Look for beginner tutorial WebDynpro / iView

Hello,
first of all I would to say that I am new in SAP and EP. (I am a student who is writing his thesis)
I just downloaded and installed the SneakPreview and now I would like to develop a simple demo application.
I like to develop it in Java/WebDynpro and an iView for showing the appl. in the portal.
Does someone know a good tutorial for a simple "Hello World" application?
I think that I only need a WebDynpro tutorial because the iView can be created "easily" within the portal administration.
At the moment I not have any other SAP-system behind the portal, so I need only a very simple application, that shows me some Text within an iView.
I already searched the forum but all findings only were some code-idea-pieces and not a complete step-by-step tutorial.
Thanks a lot for your help.
Regards
Thomas

Hi Thomas,
this <a href="http://help.sap.com/saphelp_nw04/helpdata/en/98/961ec43e96f042821b9e9ba873773d/frameset.htm">link</a> has several basic webdynpro tutorials. Use the search engine in sdn (not the forums) to look for more. Also, use the search engine on <a href="http://help.sap.com/">help.sap.com</a>
regards,
Dion

I am looking for a wall photo maker program can anyone recommend one.

I am looking for the above can anyone help please.

I did a search and a) the softonic download site is mentioned often and I'd not recommend using them as they like to add unwanted things to their downloads, and b) came up with one that looked promising by oreware.com - however, WOT warned that it is not a trustworthy site, so I opted not to go there.
You will need to be very selective while searching for such a software.

Wi-Fi WEP security - looking for a way to make my use more secure.

Having system results even using Kaspersky as a Internet application for security, and found the reinstall not just slow as a result of my attempts to reinstall, and failing to complete the down load. Looking for a tool that can help, any suggestions?

Second the advice to remove the Anti-Virus software.
WEP - Are you using System Preferences -> Sharing -> Internet Sharing?
If you are, you cannot change the protection. It is WEP only.
I would suggest you get a dedicated router which is capable of WPA/WPA2 encryption.
If you have a short term need for Internet Sharing (such as a hotel room with ethernet, and you want to share with your iPhone/iPad/iPod Touch, etc...), then Internet Sharing for that is not that much of an issue. After all you are trusting the hotel network :-)

Looking for a way to make a photo less than 100kb

I have all the 'considered best' photo apps for my Ipad3. I've read every manual, looked on the net, downloaded any trial photo sizer app I can find and have spent hours trying to do what I believe should be a no brainier but have not found a resolution to a simple problem.
I'm trying to find a way to make a photo a specific MB size. I post on a bulletin board that has a restriction of 100MB upload. There is a great app for Mac but ways to make a photo a specific file size doesn't seem to be available for the Ipad. After hours of searching I'm at a loss as to why there aren't any apps to do this.
A simple app with a slider or other that will give you the MB size as you move it would be great. Every app has a plethora of options and they still can't even do that.
Any suggestions?
Dan

Thanks sberman
That will work taking a few steps although I would think it's a last resort with fair results. Thanks again. While waiting for a response I decided to bite the bullet and purchase an app that looked promising. ( Don't like to purchase as I've purchased a number of .99 apps and wasted money )
So, I purchased this app called 'Resizer' not knowing if it would do the trick. It did! I even got a bonus as the app lets you upload to a photo site. From there it's a simple paste the link and I'm done. The app appears to have been made for the purpose of posting photos to BB's which is what I'm doing.
I was trying to get as close to the max size as I could as they have a weekly 'photo day' and wanted the best quality. That app did it.
Thanks again for the suggestion.
Dan

Looking for a tutorial on this effect

Hi guys and gals.
I want to learn this editing effect seen in this clip
http://vimeo.com/22611216
Its the effect where you see the subject over and over again in the same frame, Look at 1.19 for the sample.
If you can help with a link to a tutorial or any advise please let me know.
Also take note how the background clouds seem to move indipendent to the subject that has been altered in editing. That effect is way cool.

David Bogie Chq-1 wrote:
Oh. Well, all I saw was some guy holding his junk and walking around the top of an old hotel in New York. No sign of masked girls walking or on bikes, not may girls at all. Sure you gave us the right link?
Yes, David - your old eyes must be failing you - all those music-video-y quick cuts...
But I don't recall him holding his junk... Had his hands folded in front of himself... didn't see no junk, though... Oh, and the bikes were in the OP's link.
Patrick
(see - Christina has younger, hipper eyes)

I work with retired people who are looking for a way to make the bookmarks larger so they may be more easily read. Any suggestions?

As the question asks, is there a way to make the bookmark tabs larger for people whose eyesight is not as keen as when they were younger? For instance is there an add on that would address this? thank you for your help.

As the question asks, is there a way to make the bookmark tabs larger for people whose eyesight is not as keen as when they were younger? For instance is there an add on that would address this? thank you for your help.

Looking for a tutorial/design-pattern for Manage User and Permissions.

Hello,
I wonder if anyone knows a good tutorial/blog with reference to security - howto Manage Users and Permissions.
In my application I have GROUPS and each group has access to different RECORDS and CASES.
Example:
Groups: Alfa, Beta, Gamma
Record: R1, R2, R3...
Case: C100, C200, C300
Group Alfa can view: R1, R2 and C300
Group Beta can view: R1, R3, C200, C100, C300,
Group Gamma can view: R3
My question is this: what should be the best way (design-pattern?) to force a policy to securing the Records/Cases?
What should every case/record implemented to verify that a user (part of a group) has the right to access the entity.
Thank You!

Sorry if this one is too basic for you but as I do not know your level of experience try:
http://www.adobe.com/devnet/dreamweaver/articles/first_dynamic_site_pt3_print.html
HTH
There are also many other tutorials on:
http://www.adobe.com/devnet/dreamweaver/application_development.html

Looking for a tutorial on how to use VI Server

Hello. Can anyone link me to a tutorial or article that covers the usage of VI Server across machines on the same network?
Also, can VI Server functionality be used inside executables created by developers suite w/o any running LabVIEW instances?

The VI server allows you to programmatically access and control VIs running in any LabVIEW instance. That instance can be the current one, another one on the same computer, on a different computer around the world or even on an RT target and working with them is the same in all cases.
It starts with calling Open App Reference, which recieves a computer name (or IP address) and a TCP port number. These determine the specific LabVIEW instance and from that point on you work on that instance using the reference you got from the function. See a simple example of connecting to a remote VI here. The same works with property and invoke nodes.
You should note that not all properties and methods work on remote instances. Each has a table in the online help with one of the lines being Available on Local LabVIEW Only. If this is true, it means that you can not use that property in a remote instance.
Try to take over the world!

I am looking for a tutorial on how to animate an arrow on a map from a starting point to an ending point and then fade.

I am new to AE and am trying to animate an arrow on a map. If anyone know of a good tutorial I would appreciate it.

How about a sample project? Dropbox - bendyArrow.zip
It's an oldie but a goodie that will still open in CC

Looking for a tutorial to make a paint splash

Similar Messages

Maybe you are looking for