Looking for a UK based Labview programmer, short term, contract or full time, depending on what suits. Immediate start, Signal Processing skills ideal.
We are a UK South-West based LabVIEW consultancy company looking for a LabVIEW programmer preferably with advanced signal analysis and processing skills, to become part of the team or work as a short term contractor. We will be looking to advance their skills through a range of different projects that we work on, from aerospace test and measurement, through to shop floor data collection and User Interface marketing.
Must have at least two years experience in LabVIEW and have an electronic engineering based degree or be able to show signal analysis is an area of expertise. We are looking to fill the position as soon as possible.
Please your CV’s to the below address.
[email protected]
If the candidate had all the correct attributes then it could indeed be an option.
Regards
Peter
Similar Messages
-
Looking for a java-based SDK that handles file conversion to PDF and TIF...
Hi all,
First off, this is my first posting so I'm not 100% sure where to post this topic. So please forgive me if I'm accidentally posting in the wrong location.
My question deals with a project I am currently working on.
I am looking for a java-based SDK that can meet the following requirements...
1) convert all printable file-formats (i.e. JPEG, DOC, TXT, PPT, etc.) into PDF
2) merge multiple PDFs into one PDF
3) convert PDF to TIF or at least do some sort of conversion to TIF
4) works in Java or some sort of web-based language
5) free or relatively cheap
Any advice/suggestions would be greatly appreciated.
Thank you very much.I don't think you will get one API to do them all.
Some helpful hints:
[http://schmidt.devlib.org/java/libraries-pdf.html]
[http://xmlgraphics.apache.org/fop/] (with the pdf-image extension, that I can't find now :shakefist)
JAI -
I am looking for a manual of LabVIEW
Greetings, all!
I am looking for a manual of LABVIEW that I can download.
Also I'm looking for any examples, wherefore LabView can be used
in electronic applictions and datasheets of the IEEE488 protocol.
Thank you for your time and attention,
and for any help you can provide!
Jeroen Verbeke, Software Engineer, Summa, Inc.
Provinciebaan5A,8680 KOEKELARE, West-Vlaanderen BELGUIM
tel.(0496)6834910
[email protected]The link for any manuals from NI is http://digital.natinst.com/manuals.nsf/web/byproductcurrent
The link for examples is http://www.ni.com/support/dnldgtwy.htm
And A link for IEEE 488 documents is
http://standards.ieee.org/reading/ieee/std_public/description/im/488.2-1992_desc.html
Note: IEEE charges a fee for the document.
I hope that this helps,
Bob Young
"jeroen verbeke" wrote:
>Greetings, all!>I am looking for a manual of LABVIEW that I can download.>Also
I'm looking for any examples, wherefore LabView can be used>in electronic
applictions and datasheets of the IEEE488 protocol.>>>Thank you for your
time and attention,>and for any help you can provide!>__________________________________________________________>Jeroen
Verbeke, Software En
gineer, Summa, Inc.>Provinciebaan5A,8680 KOEKELARE, West-Vlaanderen
BELGUIM>tel.(0496)6834910>[email protected]>>>>
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected] -
I am looking for an app that can unmute my iphone after a preset time, eg 1 or 2 hours. Does anybody know an app with this feature?? The apps I have found are linked to a calendar or a place, I just need the timer function..
thanks. yes i am aware of the VoiceOver feature but it is NOT the solution to my problem. as you said, it is a solution to a different set of issues. i want the text to speech ability because i there are books i need to read but do not have the time to sit down and read them and have become used to listening to them read to me either by a professional human reader or with the text to speech software on the Kindle.
I think Apple makes the best audio devices but i am really disappointed in this inexplainable shortcoming. if apple can give us siri they ought to be able to design a nice little button that i can push to turn on text to speech while i am in a document, book, magazine or webpage. clearly it is possible as apple has added the "reader" button in safari to have web pages dropped into the reader format.
thanks for your suggestion though, it is what everyone suggests but it does not address the issue. -
I am looking for an ipad app that will restrict game play during certain times, but will allow education and reading apps. Is there such an app?
I want my kids to be able to take their ipads to school - restricting game play.Not aware of such an app. Here's some generalparental controls info.
How Do I Block Websites on My iPad?
http://www.ehow.com/how_8716944_do-block-websites-ipad.html#ixzz2lh8910jd
How To Set Parental Controls and Block Content on the iPhone, iPad, and iPod touch
http://blog.laptopmag.com/how-to-set-parental-controls-and-block-content-on-the- iphone-ipad-and-ipod-touch
How to block specific websites from being accessed with Safari for iPhone and iPad
http://www.imore.com/how-block-specific-websites-being-accessed-safari-iphone-an d-ipad
How To Setup Parental Controls On The iPad
http://content.mobicip.com/content/how-setup-parental-controls-ipad
ParentKit
https://itunes.apple.com/us/app/parentkit/id600618138?ls=1&mt=8
Parental TimeLock - Time limit for children
https://itunes.apple.com/us/app/parental-timelock-time-limit/id689577280?ls=1&am p;mt
Cheers, Tom -
I have a short term contract requirement to carry out modifications to existing Windows and CVI production test programmes for RF products. We are located in North East Hampshire with an immediate start.
Hope you are doing well! We are the UKs highest LabVIEW certified NI Alliance Partner. We have a RF developer expertise in CVI based in London. You can contact us at http://www.austinconsultants.co.uk/ContactUs.html and have a look at some of our projects there as well. We would certainly be interested in learning more about your project and have our London based engineer contact you.
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies -
DSPCon is looking for a Software Engineer/LabVIEW-based application development
E-mail resume to [email protected] Please Visit Our Web-Site for full job description. www.dspcon.com
DSPCon specializes in the development of real-time data acquisition and analysis systems for use in a variety of Digital Signal Processing intensive applications such as shock and vibration analysis, rotating machinery analysis, and digital recorder applications. DSPCon provides high-end system solutions into both the Commercial and Defense markets.
With a variety of hardware and software products in our line, DSPCon has the ability to provide COTS-intensive, cost-effective solutions for any digital signal processing project.
Consistently chosen by the US Government and Fortune 500 companies, DSPCon has hundreds of systems in operation today ranging from high-channel, high-bandwidth data acquisition and analysis systems for wind tunnel applications, to infrared processing, analysis and archiving systems for defense related applications.
DSPCon is looking for a Software Engineer with a successful track record in design and development of new products and bringing them to market in a 9- to 12-month time scale.Hi,
There is a section for companies looking for LV developers, here:
http://forums.ni.com/ni/board?board.id=JobPost
You should mention where the job is offered and if it is something that can be developped off-site (for consultants like myself, tbob, Ben and a number of LV developers).
Hope you find the right candidate.
Ray -
Looking for a web based filemanager (or similar).
Hello,
I have a small server at home hosting all my files and I am looking for a simple setup to be able to access these files from pretty much every where.
Usually I'm using ssh or sftp but the thought of being able to access the files through a web interface is really sounding good. So, I have been searching for a web based file manager and found a few, but none that really made me go wow.
The best so far is probably Ajaxplorer. One thing that I'm looking for though is a PAM authentication feature which Ajaxplorer doesn't have. Are there any web based file managers around that supports this?
Or... maybe I'm looking for the wrong things. Are there other nifty solutions available for accessing files on a remote folder through a web interface?zenlord wrote:
If PAM authentication is all you're missing, why don't you setup http_auth?
THX for the suggestion, I was looking for something like this myself and the next version should have LDAP_auth - alrighty then!
Zl.
http_auth... do you have any nice links on how to use it? I've never heard of it
Ajaxplorer is quite nice after all and setting up repositories isn't all that bad. Looks like I'm sticking to it while I continue my search for another app. -
I am currently recently graduated from the University of Technology in Belfort-Montbeliard (France).
Master’s grade of “Electrical and control systems engineering”.
I am currently looking for a job in automation, control systems and electronic domain (I prefere LabView Developpement)
Salim DARWICHE
1 rue antonin artaud
31320 castanet tolosan
Tel: 0033.6.85485107
Email : [email protected]
Nationalities :
- French
- Lebanese
Date and place of birth:
April 18, 1986
Toulouse,
France
Education
2009
Master in Electrical and Control Systems Engineering
Option Embedded
systems
University of technology of Belfort-Montbliard france
2006 University
Diploma in Industrial and Maintenance Engineering
DUT Degree Equivalent to 3 years of
technical studies
Institute of technology of Saida
Lebanon
Experience
February
July 2009 Galley-Technologies (Neuchatel-Switzerland)
Mission:
Development of
Labview Modules for Pharmaceutics and Robotics
industries
Realization(s):
Communication and data-Analyse Software using
TCP/IP:
- Development of a software (Labview Programming) that would permit data
transfer between many pharmaceutical ovens, in order to analyse all production cycle, and test
the conformity of the final products.
5 Axis robot simulation software:
Concept and development of simulation tool for a robot working cycle
September 2007
February 2008 Valeo VSS (Paris France)
Mission:
Qualification and management of
automobile electronic components
Qualification of specific electronic components
Making sure that all electronics components will be qualified on time before the
Start-of-Project
- Discussion between me, Valeo supplier and Valeo Project Manager in order
to grant Valeo quality standard Specifications or to approve supplier deviations.
Management of electronic qualification documents on Valeo ePLM system.
- Participating to
daily quality reviews meetings and brainstorming in order to apply a PDCA (plan Do Check
Act)
Management of Valeo DSA products under IMDS Base
- Management and
declaration of Valeo Division Systems Access products under IMDS base (international Material
data systems)
- Creating MDS sheets then sending them to Automobile
Constructors.
February June 2006 United-Group Machinery
(Beirut-Lebanon)
Mission:
Renovating a bag-filling
machine
Realization(s):
Mechanical system
- Drawing all parts of
the machine (3D), assembly and motion using Autodesk Inventor.
- Unmount, replacing bad
parts then assembly of the machine.
- Integrating of a weigher machine to the top of the
bag-filling machine.
Control system
-Removing old control system and
integrating a PLC and a control panel
-Programming the PLC (Delta type) with Ladder
diagram.
Knowledge
Languages
French
and Arabic: Native languages.
English: fluent, TOEIC 890/990 Test of English for
International Communication.
Spanish: Intermediate.
Automation
- Labview,
Matlab Simulink
-Programming DSP Controller TMS320LF2407.
-Programming in languages:
assembler, C.
- PLC Programming (Crouzet, Delta, tlmcanique, Moller) -Ladder, List,
Grafcet-
-Controlled systems: Continuous aspect
Electronics
-Programming in
VHDL.
-Programming of PIC 16F87X.
-Simulation (Simplorer, Circuit maker, Electronic
Workbench, Proteus, Kicad).
Electrical
- Machines D.C. current, synchronous,
asynchronous, electrical supply networks.
Various
- CAD: AutoCAD, Autodesk
Inventor, Mastercam, Programming of machines with numerical control CNC (languages Num, Fanuc,
Fagor).
-CAM: Ms-Project (Gantt, Pert, Kanban)
Message Edité par salimo le 11-04-2009 04:35 PM
~~~~~~~~~~~~~~~~~~Looking for a LABVIEW JOB (In EUROPE)>~~~~~~~~~~~~~~~~~~
**The Best Way To Predict**The**Future Is To Invent It**
Attachments:
CV_Salim_Darwiche_S_12_10_09.doc 77 KB
CV_SalimDARWICHE_EN_S.doc 229 KBMessage Edité par salimo le 11-04-2009 04:36 PM
~~~~~~~~~~~~~~~~~~Looking for a LABVIEW JOB (In EUROPE)>~~~~~~~~~~~~~~~~~~
**The Best Way To Predict**The**Future Is To Invent It** -
Looking for a Chicago Based FIRST volunteers
I am aware of three high schools that are looking for LabVIEW seasoned professionals that are interested in volunteering for the First Robotics Competition. I would recommend you look at a map and make sure you are located near these high schools. Please go to this thread: http://forums.ni.com/ni/board/message?board.id=170&thread.id=369163
Mention that you are looking to volunteer at Phoenix Military Academy, Deerfield High School, or Mundelein High School. Regards, -SS
Message Edited by ShotSimon on 01-06-2009 09:52 AMI don't think you will get one API to do them all.
Some helpful hints:
[http://schmidt.devlib.org/java/libraries-pdf.html]
[http://xmlgraphics.apache.org/fop/] (with the pdf-image extension, that I can't find now :shakefist)
JAI -
Looking for the LMS based on SharePoint
Hi,
We are using MOSS 2007 and are looking for the Learning Management system, wich could be integrated.
Found SharePointLMS (http://www.sharepointlms.com/) and Sharepoint Learning Kit
Any other suggestions?
May be someone can compare these two at list?Hi
We have LMS based on Share Point Server, you can loggon to www.intralearn.com for more details. You can send a mail /contact at the given below address. We have office accross the globe.
Surya Prakash
The Boston Group
Phone: +91 40 2354 0519 /547 / 576
Mobile: +91 9948919134
Email : [email protected]
Lerning Portal : www.intralearn.com -
Looking for Toronto (GTS) based MAC expert... suggestions?
Looking for a MAC expert that can come into by business and assist with all our computers.
We have the need to configure all our computers, place a backup system in place. etc.These forums are mainly for asking technical questions; Apple does not participate except to occasionally make sure that the ToU are being followed. I believe there is a business section if I'm not mistaken? Ahh, here is a link to the Apple Business Store:
http://store.apple.com/us_smb_78313
You might want to start there; I am sure there'd be resources, but since I've never had the need, I don't know where to find them. -
We are looking for some help in developing and App, so that we can publish our current hard-copy magazine with 117 pages onto the iStore any suggestions?
as bob said, it depends what kind of assistance.
which language is needed, are you able to spend money on it, when is the deadline.
do you need technic support, design help? do you have a license for dps, which one?
ect.
if you need a professional, experienced team our company could help you. but we will not work for free -
I am looking for a cat breeders pedigree programme that is compatible with a mac running Lion
I am a cat breeder and I am looking to create pedigree certificates on my Mac but can't seem to find any compatible programmes please help.
Many Thanks
ShelleyYou mean like this (20-second Google search)?
KinTraks - The pedigree program for every animal breeder -
Here is the correct post:
Are you detail-oriented, creative, and technically skilled at Engineering design and development? Come to Crane Aerospace & Electronics and use your excellent Engineering skills to design, improve, and deliver the next generation of products in the aerospace and electronics Industry!
We have a unique and exciting career opportunity for Engineer II, Test.
You will be responsible for maximizing new product development and manufacturing performance through the creation and deployment of test strategies, tools, and plans. Design and implement high performance hardware and software for test equipment. Authoring test procedures and performing Qualification test activities. Ensure high product quality.
Responsibilities:
Collaborate with customers and multi-disciplined engineers to establish/clarify test, qualification, verification and validation requirements.
Write test plans, procedures, requirements and reports in a highly structured environment.
Analyze, develop and deploy complex and high performance test hardware and software solutions for automated test equipment.
Design, develop, debug, validate & verify the fabrication of manual and automated test equipment at the circuit board and system level, and specify and procure COTS test equipment.
Develop/maintain hardware documentation including block diagrams, schematics, BOMs, wiring diagrams and wiring lists, software documentation, and configuration control of initial release and updates.
Perform detailed calculations to establish test equipment specifications and design margins.
Maintain existing test systems through bug fixes, improvements and modifications.
Support the estimation of costs and schedules to develop or upgrade test platforms.
To perform a number of the above responsibilities with limited supervision.
Minimum Requirements:
Experience: 2-5 years. Previous work experience in aerospace, space or medical electronics industry preferred.
Knowledge: Microprocessor / Microcontroller hardware and firmware design; Analog Circuit and power supply design; Digital Circuit Design including high-speed serial communication design; Firmware programming in c; Schematic Capture, PADS Logic preferred; Circuit Simulation; Fundamentals of magnetic proximity, temperature, and pressure sensing electronics; ESD; Familiarity with testing standards (MIL-810, MIL-704, and DO-160 preferred). Basic laboratory test equipment; LabVIEW experience, certification preferred; Developing hardware per DO-254 and software per DO-178 preferred; Experience with Adobe FrameMaker, IBM Rational tools, TestStand, Microsoft Project preferred.
Skills: Good interpersonal and communication skills (verbal and written)- effectively lead and/or participate in multifunctional teams in a dynamic work environment. Ability to manage multiple tasks, flexibility to switch between tasks and prioritize tasks.
Education/Certification: Bachelors Degree in electrical engineering, computer science, physics or related technical discipline.
Eligibility Requirement: Must be a US Person (under ITAR rules) to be eligible.
Working Conditions:
Working conditions are normal for an office/manufacturing environment. Machinery operation requires the use of safety equipment to include but not limited to safety glasses, heel straps, and shop coats.
Requires lifting 25 lbs
Apply online today: http://ch.tbe.taleo.net/CH06/ats/careers/requisition.jsp?org=CRANEAE&cws=5&rid=3170
Crane Aerospace & Electronics offers competitive salaries and outstanding opportunities for career growth and development. Visit our website at CraneAE.com for more information on our company, benefits and great opportunities.
In our efforts to maintain a safe and drug-free workplace, Crane Aerospace & Electronics requires that candidates complete a satisfactory background check and pass a drug screen prior to employment. FAA sensitive positions require employees to participate in a random drug test pool.How can you say you are hiring test engineers with LabVIEW, yet the job description doesn't even mention LabVIEW. All I see in there is CAD design.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Maybe you are looking for
-
Officejet Pro K850 Will Not Stop Printing An Alignment Page
Hi Everyone, I hadn't used my K850 printer for about 6 months so when I needed to print something with it I ran the the print head cleaning option first. I needed to run it up through all three levels in order to get them clean. After that just for
-
Hooked up mini to a mitsubishi wd-52631 via DVI-I(PureAv cable) on both ends. Mini desktop shows up then I hit format on remote and the entire desktop became visible when boxed. So then I open VLC and play disc in drive fine(in small window on deskto
-
Permitted payee in Vendor master
Hi Experts, I have created a Vendor master with a Permitted payee in the General--Payment transactions. I know this is at a general level. The permitted payee is also defined in the same company code. When I go into FB60 and look for "Payee" , it sa
-
Creative soundcards not supported!? FME 3.0
Hi, For some strange reason, the new flash media live encoder does not support both of my soundcards - one is a creative soundblaster audigy 2 zs, and the other one is a creative Sb X-fi. How can this be? They were supported in 2.5, but not 3. What's
-
To all - is it possible to write a java program that will perform a search against TREX indexes i already have the 3rd party search application working (Oracle Collaboration Suite searching from inside TREX) but was wondering if some java program cou