Looking for a verbose version of Internet Connect

In talking about a connection problem regarding dialup sign-on with my ISP tech support, he asked for the error number. When I said I used a Mac, he asked if someone with a PC could try. Obviously there must be messages transferred during the connection process that I do not see.
Is there a version of Internet Connect that will show me those messages?

It's been a while, but IIRC you can open System Preferences -> Network -> Dial-up modem -> PPP and click the Options button. There are options for verbose logging which will log all the connection data which you can review later.

Similar Messages

Is the user for the trial version required Internet connection?

I installed trial version of Fireworks at my home with internet connection. At that time I log in Adobe page and leave my profile. Then I can open the soft, but I coud't when I try to use Fireworks without internet connection environment. Am I suppose to always have the Internet connection for trial use? Is there any difference if I purchased software?

To the best of my knowledge, an internet connection is not required in order to use a trial version of Fireworks—except for perhaps when installing the software or completing an initial account setup. It certainly isn't required for purchased software.
For more information about trial downloads (as well as the Adobe Creative Cloud), try these resources:
http://www.adobe.com/products/creativesuite/faq.edu.html#trial-info
http://www.adobe.com/products/creativecloud/faq.edu.html
http://forums.adobe.com/community/download_install_setup/ada_faq

HT1483 I get a message "The Itunes server could not be contacted, check your internet connection" when trying to check for Ipod Nano software updates. I have a 1st generation Nano and haven't updated the software for a while. My internet connection is wor

I get a message "The Itunes server could not be contacted, check your internet connection" when trying to check for Ipod Nano software updates. I have a 1st generation Nano and haven't updated the software for a while. My internet connection is working. Was thre a change in the internet address for NANO software updates? Do I have to reconfigure something in Itunes to point to the correct address?

What version of iTunes are you using? The latest is 10.6.3. In iTunes, choose Help -> About iTunes to check the version number. If it's lower than 10.6.3, download the latest version from here.
B-rock

I'm looking for the long version of In the Garden of Eden with the long drum solo?

Looking for the long version of In the Garden of Eden - the one with the long drum solo.

Don't believe it was ever released as digital download.
The live version is here -> http://www.amazon.com/In-A-Gadda-Da-Vida-Live-Version/dp/B00123B8KK/ref=dm_att_t rk6
(FYI: It's In-A-Gadda-Da-Vida)

I am looking for software to store photos with. I am not a fancy photographer, and really am just looking for the digital version of a photo album. iPhoto is not cutting it, mainly because it does not back up and restore easily on an external HD.

I am looking for software to store photos with. I am not a fancy photographer, and really am just looking for the digital version of a photo album. iPhoto is not cutting it, mainly because it does not back up and restore easily on an external HD.

That's how Time Machine and iPhoto now work. Restore the library to one of the external HDs, check it for the photos you want, export them to the boot drive and delete the restored library.
If you know the file name of the photo you're looking for you can search for them in the TM backup using Find Any File.
My workflow allows me to do that:
1 - upload new photos to a folder on the Desktop.
2 - name the folder to represent the contents and date: 01/03/10-Toads Bday
3 - use a file renaming app to sequentially rename the photos in the folder to: 2010-01-03-Toads Bday-001.JPG, -002,JPG, -003.JPG, etc.
4 - import the folder into iPhoto creating an Event with the same title as the folder.
Now I can search for those file by file name with any app of my choosing.

I rented a Movie and it has been loading for 3 hours now. Internet connection is fine. Have never had a problem with this before. What's really annoying is that the 24 hour time limit is counting down even though we cant watch it. Any suggestion"hours now

I rented a Movie and it has been loading for 3 hours now. Internet connection is fine. Have never had a problem with this before. What's really annoying is that the 24 hour time limit is counting down even though we cant watch it. Any suggestions?

The first thing to check would be your internet download speed, you can do this at www.speedtest.net.
HD movies require a recommended speed of 6 Mbps, while SD movies require a recommended speed of 2.5 Mbps.
Additionally, your 24 hours don't start until you begin to watch the movie, you have 30 days to start watching the movie.

I'm looking for a dutch version of Adobe Photoshop Elements version 3.0

I'm looking for a dutch version of Adobe Photoshop Elements version 3.0

http://helpx.adobe.com/x-productkb/policy-pricing/serial-number-retrieval-process-faq.html

I get error message -3259 when trying to download Version 5 update for I pad, yet the internet connection is still operational. Why is this?

When trying to upload Version 5 update for IPad after the download is complete and the files are being processed I get an error message - 3259 which says the internet connection is timed out but in fact it is still operational. The download is unsuccessful. Why is this?

Try temporarily turning off your firewall and antivirus software until the download has completed.

IMail 5.2: How do I optimize it for use on a slow internet connection?

Hi there,
I recently upgraded to Lion OS X v 10.7.3, and i like iMail 5.2 when I work from my office or home.
BUT, when I am working in the field I often have access to only glacially slow internet via an internet modem, and iMail takes FOREVER to download my messages. Way longer than my pre Lion version of iMail.
Is there a way to optimize iMail 5.2 in order to optimize for slow internet connections? For instance, to partially retrieve large messages? Or to somehow deactivate all the synchronizing and other Activity that goes on in the background?
Many thanks,
Hoyt

Use a web based email account like GMail or HushMail, because they are a website and people access their emails from many different machines (phones, computers, slow or fast connections) the site can optimize things better than a dumb mail server.
It's possible to auto-forward a copy of your present email accounts to have them on the web based accounts too, don't know exactly how to go about it, but many people elsewhere also have the same desire so it's obvious something like that is being used.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

OSD TS looking for previous package version, not finding it.

Yesterday, I upgraded our SCCM environment from 2012 R2 to 2012 R2 CU3.
I am currently unable image most machines (only VM's work, for some reason) as the TS is failing with the error about it not being able to find the package xxx00002, which is our Configuration Manager Client package. As a part of the CU3 upgrade, it
initiated a update on this package, taking it from version 10 to version 11. All distribution points now have the version 11 package.
My pain point is that the task sequences we are attempting to reimage with are failing when looking for version 10 of the package. Snippet below. I'm hoping someone has some ideas on how I can resolve this or has seen it before. I tried
changing the package in the 'Setup Windows and Configmgr' step to another package, saving, and changing it back, to no avail.
Log snippet below.
Content location request: TSPxe
1/30/2015 2:30:24 PM 1796 (0x0704)
Package : XXX00002.10 TSPxe
1/30/2015 2:30:24 PM 1796 (0x0704)
Client : GUID:EB7523EE-E5F0-48B0-8F27-C84D21BEE0DC
TSPxe 1/30/2015 2:30:24 PM
1796 (0x0704)
Local : 1 TSPxe
1/30/2015 2:30:24 PM 1796 (0x0704)
Remote : 4 TSPxe
1/30/2015 2:30:24 PM 1796 (0x0704)
Internet: 0 TSPxe
1/30/2015 2:30:24 PM 1796 (0x0704)
Sending RequestContentLocations for XXX00002
TSPxe 1/30/2015 2:30:24 PM
1796 (0x0704)
Setting message signatures. TSPxe
1/30/2015 2:30:24 PM 1796 (0x0704)
Setting the authenticator. TSPxe
1/30/2015 2:30:24 PM 1796 (0x0704)
CLibSMSMessageWinHttpTransport::Send: URL: servernameFQDN:80 CCM_POST /ccm_system/request
TSPxe 1/30/2015 2:30:24 PM
1796 (0x0704)
Request was successful. TSPxe
1/30/2015 2:30:24 PM 1796 (0x0704)
::DecompressBuffer(65536) TSPxe
1/30/2015 2:30:24 PM 1796 (0x0704)
Decompression (zlib) succeeded: original size 244, uncompressed size 882.
TSPxe 1/30/2015 2:30:24 PM
1796 (0x0704)
Location Reply: <ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags=""><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="111" MasterSiteCode="111"
SiteLocality="LOCAL" IISPreferedPort="" IISSSLPreferedPort=""/><LocationRecords/></Site><Site><MPSite SiteCode="222" MasterSiteCode="222" SiteLocality="LOCAL" IISPreferedPort=""
IISSSLPreferedPort=""/><LocationRecords/></Site></Sites><RelatedContentIDs/></ContentLocationReply>
TSPxe 1/30/2015 2:30:24 PM
1796 (0x0704)
Processing 0 locations. TSPxe
1/30/2015 2:30:24 PM 1796 (0x0704)
No static content server. TSPxe
1/30/2015 2:30:24 PM 1796 (0x0704)
LocationsList.size() > 0, HRESULT=80040102 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,2138)
TSPxe 1/30/2015 2:30:24 PM
1796 (0x0704)
FALSE, HRESULT=80040102 (e:\qfe\nts\sms\framework\tscore\tspolicy.cpp,1930)
TSPxe 1/30/2015 2:30:24 PM
1796 (0x0704)
Content location request for XXX00002:10 failed. (Code 0x80040102)
TSPxe 1/30/2015 2:30:24 PM
1796 (0x0704)
hr, HRESULT=80040102 (e:\qfe\nts\sms\framework\tscore\tspolicy.cpp,2702)
TSPxe 1/30/2015 2:30:24 PM
1796 (0x0704)
Failed to resolve PackageID=䛸ǅ TSPxe
1/30/2015 2:30:24 PM 1796 (0x0704)
(*iTSReference)->Resolve( pTSPolicyManager, dwResolveFlags ), HRESULT=80040102 (e:\qfe\nts\sms\framework\tscore\tspolicy.cpp,3488)
TSPxe 1/30/2015 2:30:24 PM
1796 (0x0704)
m_pSelectedTaskSequence->Resolve( m_pPolicyManager, TS::Policy::TaskSequence::ResolvePolicy | TS::Policy::TaskSequence::ResolveSource, fpCallbackProc, pv, hCancelEvent), HRESULT=80040102 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,1564)
TSPxe 1/30/2015 2:30:24 PM
1796 (0x0704)
Failed to resolve selected task sequence dependencies. Code(0x80040102)
TSPxe 1/30/2015 2:30:24 PM
1796 (0x0704)
Thanks in advance!
Scot

Yes. They have version 11.
In the meantime, I have created a new Configuration Manager Client package and swapped it out with successful results, as might be obvious.
Most likely, I'll simply update the package on the distribution points to resolve it permanently (to version 12). It's just not a quick fix for us as we have
a lot of distribution points. Sending down another copy, since the files are already there in content library, won't require nearly as much WAN traffic or time. We'll swap the task sequences back once
we update XXX00002 to version 12.
Thanks,
Scot

Itunes version 7 internet connection problem

Since Apple has relise itune to v7 i found a lot of problem after i update to this v7. First is the sound quality and i been solve this problem after i updated to v7.0.2 but it still have problem too when the itune play next song. I need to close itune and start again.
Second problem is my ipod usb connection problem, it pop uot said cannot write to the disk. that time i though my ipoh's harddisk got problem after that i try connect to firewire and is runing smooth.
Third problem is the internet connection, it always happen i can't get into itune store and itune radio. I start using itune when i own a 20GB ipoh shuffer and that time is version 5 or 6 and everything is runing smooth. I even check my mcafee firewall is full acess for the itune.
I hope Apple can take note all the problem / error for window os user and i think not just me face this problem.
Finaly hope Apple can understand my broken english (sorry about that).
Chee

Kindly connect the modem straight to the computer...click start >> all programs >> accessories >> command prompt...In the command prompt window type ipconfig /all and press Enter...Post the details...
Kindly state your ISP(Intenet Service Providor).
Kindly state the make and model number of your modem(not the wrt54g).

Looking for some guidance on an Internet and Wan failover design

Hey Everyone,
I have a project that has been somewhat dropped my lap. The person who was going to do the project has abruptly bowed out. I'm stuck in a position where I can either find another contractor, or just do the work myself. For sake of saving my company, and putting another notch in my belt, I think I'm just going to do it myself. For background info, I am a CCIE Collaboration. I have held a CCNA in route switch for several years, and have used it extensively. I have done some pretty large networking projects. But I've never done this particular aspect of route switch. I'm hoping someone here can point me to a good location for reference materials or videos.
Here is what I'm looking to do. We have 30 branch offices, with 2 major data centers. Both data centers have a 100mg internet, and a 50mg mpls connection. Today our MPLS comes directly in to a Cisco 3945 router and then uplinks in to our datcenter on a 3750 stacked switch. Our internet connection comes in to a HA pair of ASA 5510's and then also uplinks to our switches. All of our branches come back to the datacenters over the MPLS for their internet services. Today, all of our offices go to our west coast datacenter. The only thing using our east coast datacenters internet is that office itself. I want to achieve two goals:
1) Make all internet connectivity load balance. If one site loses internet, all traffic routes to the other site.
2) If the MPLS is lost, I want the datacenters to reroute traffic through a VPN tunnel between each other
The way I understood it from the person who left the project is that I need to bring the internet connection and the MPLS in to a single router, or pair of clustered routers. That router can then make the patch selection and handle the BGP with our carrier.
Thank you all in advance.

I acually have similar setup at home using a 2611 router and forwarding port ranges to multiple ips on the internal network and it works great! My issue is that I have one dynamic ip assigned by my ISP and eventually I will have to manually change the ip for each nat statement. I wanted to know if there is a way to point to the outside interface instead of using on ip address. I found out that you can use a static nat statment
"ip nat inside source static tcp 10.0.0.2 22 interface fa0/0 22" instead of
"ip nat inside source static tcp 10.0.0.2 22 72.xxx.xxx.85 22 extendable"
but I cannot find how to point my route-map to the interface to fully resolve this dynamic ip change in the future. My config is listed below which works great if you have static ips assigned by your ISP!!! Though I would love some guidance on the dynamic issue if possible. Thanks
~Roman
P.S. ip nat statements work like numbered access lists and have to be in order or it will not work. I found out the hard way!.
interface fa0/0
ip nat outside
interface fa0/1
ip nat inside
interface s1/0
ip nat inside
ip nat inside source list 1 interface fa0/0 overload
ip nat inside source static tcp 10.0.0.2 22 72.xxx.xxx.85 22 extendable
ip nat inside source static 192.168.1.3 72.xxx.xxx.85 route-map DESKTOP extendable
access-list 1 remark NAT OVERLOAD List
access-list 1 permit 10.0.0.0 0.255.255.255
access-list 1 permit 192.168.0.0 0.0.255.255
access-list 1 permit 172.16.0.0 0.15.255.255
access-list 100 remark Desktop computer port-forwarding
access-list 100 permit tcp host 192.168.1.3 3389 any
access-list 100 permit tcp host 192.168.1.3 28960 any
access-list 100 permit udp host 192.168.1.3 range 28960 32000 any
route-map DESKTOP permit 10
match ip address 100

Looking for old sun versions

Does anyone know where I can get the 1.1.1_004 plugin for IE? I need this for an old router that requires it.
plugin-1_1_1_004-win.exe

What? The current version still supports Windows XP SP3!
Windows System Requirements
PC with a 1GHz Intel or AMD processor and 512MB of RAM
Windows XP Service Pack 3 or later; 32-bit editions of Windows Vista, Windows 7 or Windows 8
64-bit editions of Windows Vista, Windows 7 or Windows 8 require the iTunes 64-bit installer
400MB of available disk space
Broadband Internet connection to use the iTunes Store
Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. CoreMedia.dll is part of Apple Application Support.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

How easy is it to plug a windows laptop into the ethernet port of a Time Capsule and for it to get an internet connection?

I use Time Capsule to distrubute wifi thoughout my home. I have an office laptop (windows) that my company's IT dept won't install a wireless card in (for security reasons????). Can I get an intenet connection to the laptop if I connect it to an ethernet port on the back of the TC?

Can I get an intenet connection to the laptop if I connect it to an ethernet port on the back of the TC?
If you can get an Internet connection when you test using your iMac's Ethernet port, then you know that the Ethernet port is working on the TC and the Ethernet cable is also working.
You should be able to get a connection on any other computer in the same way.
If you cannot get an Internet connection on the PC with the same hook up, then you will need to do some troubleshooting on the PC....or call the IT guys at the company to find out what type of block they may have on the PC.

Looking for an unattended over the internet remote support solution

Did you look into ScreenConnect?

Hello everyone... I've read some discussions today regarding remote support tools. My background comes from an older version of Kaseya (perhaps 5 or earlier), some experience with GFIMax, and Bomgar. I have changed jobs and am looking for a similar solution for the company I am at to replace the current Kaseya implementation being managed by a vendor. We have less than 15 workstations/servers to maintain. I took a look at Remote Utilities this afternoon as well as DameWare and while I lean more towards DameWare, they do not support unattended remote access at this time. Remote Utilities looks like a good solution provided I install an RU server somewhere in the building. I was looking for a solution similar to Kaseya or GFI whereby there is a cloud based console that the agents check in to that I have access to from anywhere.Are there...
This topic first appeared in the Spiceworks Community

Looking for a verbose version of Internet Connect

Similar Messages

Maybe you are looking for