Looking for a VISA Runtime Merge Module

I am building an installer with install shield. I have been able to find a LabVIEW Runtime Merge Module and that seems to work great. But, I need one for the VISA RunTime.

You can download the VISA RunTime Engine from NI's website ( click here ) and have your installer also install the RunTime engine. This link will take you to an NI Knowledge Base which describes how to do this.
J.R. Allen

Similar Messages

Looking for similar VIs in DSC 7.0 to upgrade to DSC 8.5

Hi,
I am working on upgrading a project from DSC 7.0 to DSC 8.5. In the old project, I see they used the VI relating to the VI Server Development Toolkit which includes two sets of VIs. They are Server Registration VIs and Server Interface VIs. These are the old VIs. I think they were from 1997. Can anyone tell me if there is similar VI or what is the replace techique implemented for these VIs.
Thank you for your time reading and answersing my question.
Thang Nguyen

Hi Thang,
VI-based servers created in the LabVIEW Datalogging and Supervisory Control (DSC) Module 7.x are supported in the DSC Module 8.X. However, National Instruments recommends that you migrate to the new custom I/O server architecture because VI-based servers are a legacy feature of the DSC Module. There is a great knowledge-base article that describes the sets in detail of how you can go about doing this. Also, there are great examples in the NI Example Finder that will help you set up your I/O servers with DSC 8.5. You can also find more information in the LabVIEW help. I hope this helps!
Carla
National Instruments
Applications Engineer

Looking for a specific list of modules included in Oracle Vision demo

Hi All,
I am trying to find out which EBS modules are included when you install Oracle Vision demo db. My client no longer has the Vision db installed and before I reinstall it, I'd like to know what I will get. For example, is GRC included and what is the lastest ver/rel that I should install to get the latest?
Thanks in advance for your help.

T Michaels wrote:
Hi All,
I am trying to find out which EBS modules are included when you install Oracle Vision demo db. My client no longer has the Vision db installed and before I reinstall it, I'd like to know what I will get. For example, is GRC included and what is the lastest ver/rel that I should install to get the latest?
Thanks in advance for your help.I do not think you will find the list of modules documented. However IINM, vision demo database is similar to any fresh EBS installation except for more installed modules and data, so if you refer to any fresh installed EBS instance you should get the list of modules.
Solution Beacon provides free access to 11i and R12 Vision Demo instances. You can access 11i and R12 Vision Demo instances through the following links:
Release 11i Vision Instances
http://www.solutionbeacon.com/tools_r11ivision.htm
Release 12 Vision Instances
http://www.solutionbeacon.com/tools_r12vision.htm
You may also refer to eTRM and EBS docs webites -- http://etrm.oracle.com/ and http://docs.oracle.com/cd/E18727_01/index.htm
You can download a vision VM template from http://www.oracle.com/technetwork/server-storage/vm/ebs-093153.html
Thanks,
Hussein

Looking for a Java Runtime for lion 10.7.3

Can somebody tell me, how to install a "java Runtime" on my lion 10.7.3
Yesterday I updated to Lion, and now a lot of really important programs do not work anymore, always with the question:
"Install a java runtime" - and when I do the suggested software update, it stop after a time with the message "No software available"
What can I do?
Thanks

Alternatively launch the Java Preferences in the Applications/Utilities folder, that will prompt whether you want to install Java or not.
Software update isn't showing you anything because Java needs to be installed first, which it isn't by default. You either go through the Java Prefernces or download and install manually. After that Software Update will notify you of future updates for Java, although if you do that today with above methods you'll have the latest version

Deploying Crystal Reports runtime using merge module failed

Hi,
I am having a problem when deploying Crystal Reports using merge module runtime, included into MS Visual Studio web setup project, when installing my *.msi with CR runtime on a completely clean PC (with only MS Windows installed). Error: Failed to register one of the Crystal Reportsu2019 *.dll because it could not find Microsoft visual C++ runtime (msvcr71.dll was not in Windows\System32 folder)
I am using Crystal Reports runtime merge modules, which I downloaded from here: https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm
I tried both cr120_mm.zip (Crystal Reports 2008) and cr121_mm.zip (Crystal Reports 2008 SP1)
cr120 could not find msvcr71.dll, cr121 could not find msvcp80.dll.
Steps to reproduce:
-          In MS Visual Studio 2008 create a new empty Web Setup Project.
-          Add Crystal Reports merge module CRRuntime_12_0.msm or CRRuntime_12_1.msm
-          Build *.msi
-          Try to install this *.msi on a completely clean PC. I tried it on Windows Server 2003 R2 SP3, which did not have msvcr71.dll or msvcp80.dll files in C:\Windows\System32 or in any other PATH folders.
-          During installation there is an error u2013 failed to register one of the Crystal Reportsu2019 *.dll
I am looking forward to hear from you.
Thank you.

I believe these threads have the answer for you:
https://forums.sdn.sap.com/click.jspa?searchID=19475295&messageID=6558989
https://forums.sdn.sap.com/click.jspa?searchID=19475295&messageID=6559113
Ludek

Crystal 11.5 runtime deployment required merged modules and minimum size

I have some deployment restrictions. The 11.5 runtime merged modules are about 80mb, which is very large for use.
1. Are all merged modules required? It seems as if not all of them are needed. Can I get a list of the required ones?
2. Is there anyway to minimize the deployment? Either through the msmu2019s or by breaking them apart?
Any help is appreciated!

Hi, John;
The only supported method of deploying our runtime files is to use the merge modules. All of them are required, except for the Mapping merge module, which would only be used if you are using the Mapping feature.
There is no way to decrease the size of the deployment.
Best Regards,
Jonathan

Looking for good sound module/card for AE CS4 and AE CS5.5 Echo Audio not working proper

Hi,
I have two different computers, one with AE CS4 and a other one with AE CS 5.5.
On both systems ( Windows 7 64) my Echo audio fire4 sound-module driver is not working proper
and crashing AE. Despite the latest updates from Echo. When I uninstall the driver the problems
are gone!
That's the reason I'm looking for a good stable sound-module (FireWire) to work with Premiere Pro
and AE.
Thanks! David

Hi,
I have two different computers, one with AE CS4 and a other one with AE CS 5.5.
On both systems ( Windows 7 64) my Echo audio fire4 sound-module driver is not working proper
and crashing AE. Despite the latest updates from Echo. When I uninstall the driver the problems
are gone!
That's the reason I'm looking for a good stable sound-module (FireWire) to work with Premiere Pro
and AE.
Thanks! David

Missing installer component NI-VISA Runtime

We use the LabWindows/CVI 2010 Version 10.0.0 (360) and have installed the new runtime from the installer package 5.0.3.31.
With different projects on different computers we have the same problem: The NI-VISA runtime can not be included in the installation package. With older projects which have been already distributed we get the error message when opening the tab "Drivers & Components" and click on the red entry for the visa runtime: "This component is not installed on this system, and cannot be included in distributions built on this machine". Reinstallation of the NI-VISA runtime does not help. The installation is visible in the MDF File and the registry (distributions and products). With a new project the entry NI-VISA runtime does not appear on the "Drivers & Comnponents" tab.
What went wrong? We are not able to create any distribution at this moment.
Solved!
Go to Solution.
Attachments:
ScreenInstallerError.jpg ‏334 KB

The items shown in the Drivers & Components tab are enumerated from the contents of the <program files>\National Instruments\Shared\MDF\Manifests directory. If you have NI-VISA 5.0.3 installed, you should have a file in that directory named 'NI-VISA Runtime 5.0.3 {85BA3FCF-AA00-4151-B97D-84A221E8198A}.xml'. From your experience, I would guess that maybe this file is somehow missing. That would be especially strange, given that you have uninstalled and reinstalled, but it seems to be the most logical explanation. I am attaching a zipped copy of that file here as a replacement, in case you are missing it. If you already have the file, or replacing it does not solve your problem, it will be handy to look at the debug build log. You should attempt to build the distribution, then after it prompts you and you abort, look for the file <user temp dir>\distBuildDbg.log and post it in your reply.
Mert A.
National Instruments
Attachments:
NI-VISA Runtime 5.0.3 {85BA3FCF-AA00-4151-B97D-84A221E8198A}.zip ‏5 KB

Looking for a report in LCM(Landed Cost Management)

Dear All,
We are looking for a report in LCM module to print all the unmatched/ partially matched receipt numbers with outstanding balance in accural account.
Does any one have idea on this? or worked on similar reports before?.
Detailed requirement:
There are PO order receipts for which certain costs are estimated viz. Customs Duty, Clearance Chgs. Etc.
Once the receipt is made, the inventory is valued based on the estimates. Subsequently when the actual invoice for the costs i.e. Customs Duty, Clearance Chg. are booked, there could be a variance. This difference in the estimated and actuals gets transferred to inventory provided stock exists.
However if stocks does not exist then the revaluation does not happen. In such cases we need to monitor such balances.

Hi Melvin,
You can use the User Data Dump tool. Check out the following post: https://supportforums.cisco.com/message/3403809#3403809
HTH,
Chris

Error in merge modules CR XI R2?

Hi,
I downloads for two times the "merge modules" for Crystal Report XI R2 and I would like to know if in the files: CrystalReports11_5_RDC_Reportengine.msm and CrystalReports11_5_RDC_License.msm, is there any error when was created.
I receive an error message when I try to open this files, but I can open correctly the files: CrystalReports11_5_RDC_Designtime.msm and CrystalReports11_5_RDC_Runtime.msm
Somebody knows if is this possible?
Thanks for all and best regards to all,
Antonio.

There was a release that was corrupt when it was uploaded to our FTP site. Issue has been resolved.

I am looking for PG Certification in ERp/SAP

Hi All,
I am looking for PG Certification in ERp/SAP. I am looking for a course which Multiple modules are Covered in SAP. So please Share details with me, regarding which university Offering this type of courses.

Hi
There are many different universities which offer curriculum which include different aspects of SAP. An emerging trend is to add "bolt on" SAP Consultant Certification training. The most popular of these is TERP10. A quick search of this site and you will find details aboutr this course.
There are a few universities who are allowed to offer other SAP Consultant Certification. This can take the form of classroom training, elearning or a combination of both.
In terms of classroom training, University Technology Sydney offer FI/CO courses. In terms of online there are 2 options. The first is SAP eAcademy which which is offered by private providers and some universities and is available to the general public. The SAP uAcademy is offered by a few universities in the world and is only available to university students. Accordingly it is usually significantly cheaper.
Hope this helps
Paul Hawking
SAP Academic Program Director
Victoria University
Australia
SAP Mentor

Error while installing runtime with merge modules

Hello,
We are creating a custom installer for our application, and so considered using the merge modules provided by NI.
All the dependencies are OK, and the .msi (which contains only the merge modules, since the global installer is created by NSIS) is created by WiX.
The error occurs at installation of the msi, the log file says :
NIMURegPartInfo: Starting action...
NIMURegPartInfo: About to get properties
UpgradeCodeError - (null) must have a value - exiting.
Looking at the msi file in Orca, I can see that the table "UpgradeCode" is empty, so I suppose that this why I get the error.
How do I fill this table?
Thanks a lot
Charles Brossollet

Hello,
This is an issue with how Wix and InstallShield generate MSIs that we had not run into in the past. They basically do not generate the tables inside the MSI if they are not used. Therefore, we are querying MSI for information from the Upgrade table and there is not one, so MSI returns a fatal error.
There are 2 workarounds. I would suggest the first.
1. Generate a Upgrade table entry and have your MSI installer be upgradable.
2. Open your MSI and comment out the entry in the InstallExecute sequence table for NIMUPersistPartRegInfo (commenting out in MSI means to set the Condition to 0).
If you have questions about using the upgrade table go here:
http://windowssdk.msdn.microsoft.com/library/default.asp?url=/library/en-us/msi/setup/upgrade_table....
Regards,
Jeff
NI

Merge modules for Business Objects XI service pack 4

I am in the process of developing a deployment package in Installshield 2009 - Basic MSI Project. I tried adding the merge modules I downloaded earlier from the web page, http://support.businessobjects.com/downloads/runtime.asp
Currently I do not see this web page. It would be nice if you could tell me whether do we have a merge module for Crystal Reports XI service pack 4. If we have where from i can download them. Thank you

Thanks a lot for the immediate response. However, I am not using the crystal reports Version, R2 release.
I had actually installed Business Object XI and applied service pack 4 on it. I checked the version in Help->About. It is 11.0.0.
Also my environment is XP Sp2, Visual studio 2003 and Visual studio 6.0. I understand that R2 release is needed if the environment is Visual Studio 2005.
I would like to give a clear picture of the issue I work through.
After deploying the software in the client machine, I came to know that when client tried to print the embedded crystal report (.dsr file) from CrViewer,
1. Page set-up dialog bog gets displayed.
2. After clicking 'OK' button in the page set-up dialog box, nothing happens. It is suppose to bring print dialog.
I simulated this in my development machine (confirmed that Print dialog is is not getting displayed when 'OK' button is clicked from 'Page setup' dialog)
I researched and found out from some web page that if Business Objects XI is updated to Service pack 4, this issue gets resolved
So i applied service pack 4 in my dev. machine and tested the functionality by clicking 'OK' button. This issue is no more.
Next logical step is to propagate the sp4 changes to the installer. I searched for the merge modules corresponding to Business Objects XI - service pack 4. I could not locate it now.
I searched my backup folder, I located some previously downloaded merge modules downloaded from the web page, http://support.businessobjects.com/downloads/runtime.asp
I tried to include these merge modules and received an error message "Internal build error" . My research revealed that inclusion of the merge module, CrystalReports11_RDC_Reportengine.msm (43,306 Kb, 7/4/2007) throws "Internal build error" during compilation of MSI project in Installshield 2009.
Any idea, tips and help to resolve the issue would be appreciated. Thank you.

Installed location for CrystalReports10_NET_EmbeddedReporting.msm merge module?

I'm installing the CrystalReports10_NET_EmbeddedReporting.msm merge module. In a typical installation, this puts a bunch of files in:
c:\Program Files\Common Files\Crystal Decisions\2.5\
However, in different environments, such as some Terminal Server setups, the files may get installed to a different location.<!break> How can I tell, programmatically, where these files will be or have been installed? The merge module 'decides' for itself, and I don't know how it determines where those files go and therefore, how to find them programmatically, at run time.

The files will always get installed under the "program files" directory. One way to check for the actual path is to look in the registry;
HKLM\software\crystal decisions\10.0\crystal reports
Look for the "Common files path". If you install on the "C" drive, the path will be c:\program files\common files\crystal decisions\2.5\bin.
Ludek

Merge Module for Windows Server 2008

Hallo,
I made a project with C# in VS 2005, and when I ran this project on a XP machine where no VS 2005 was installed, I needed to make a Setup-Project with a CrystalReportsRedist2005_x86.msm on this machine.
Now I want to run this project on a Windows Server 2008, and this Setup-Project can´t be run on Win Server 2008.
Is there an other Mergemodule for Windows Server 2008?
Every thing runs exept Crystal Reports!
Can somebody help me please???

it was just a beginner mistake, i just had to convert the VS 2005 Project into VS 2008 Project, and install the runtime on the target machine (CRRedist2008_x86.msi). and that´s it!
it was not possible with the Merge Module.
at first I tried to do it with CrystalReportsRedist2005_x86.msm on a Windows 2008 Server.

Looking for a VISA Runtime Merge Module

Similar Messages

Maybe you are looking for