Looking for a VPN software for mobile phone

Is there any Cisco VPN client for a Nokia mobile phone?. I have a Cisco PIX 525. Thanks.

Hi,
There is VPN client made by Nokia for Nokia E-series devices.
Not sure does it support Cisco PIX..
You could check client and documentation from here:
http://www.businesssoftware.nokia.com/mobile_vpn_downloads.php
-Pasi-

Similar Messages

  • TS1717 Having trouble running iTunes version 11.0.2 on a Dell Laptop running Windows 7 Professional Service Pack 1.  Keep getting an error message "the software required for communicating with iPods and mobile phones was not installed correctly..." reinst

    Having trouble when I launch iTunes (version 11.0.2) on my Dell Laptop running Windows 7 Professional (service pack 1).  I get an error message indicating software required to communicate with iPod and mobile phones was not installed correctly.  Do you want iTunes to try to repair this for you?  I normally respond with OK and it immediately tells me "could not be repaired.  Please reinstall iTunes..."  I have done this a number of times to no avail.

    I also notice Quicktime is not getting installed at all.
    That one is normal nowadays (ever since the iTunes versions 10.5.x).
    The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?
    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • Error message: "the software required for communicating with Ipods and mobile phones was not installed correctly....

    2 error messages when opening itunes: "The software required for communicating with Ipods and mobile phones was not installed correctly.  Do you want Itunes to repair this for you?"  When clicking yes another message indicates not able to remove services.  Another message is: "Service (ipod service) could not be installed.  Verify that you have sufficient privileges to install system sources."  I've uninstalled all Apple services (itunes, quicktime, apple software update, apple mobiles devices support, bonjour and apple application support and reinstalled itunes/quicktime - no change in error messages.  I cannot burn CDs using Itunes.  This all seemed to happen when I updated itunes to version 10.  I have a Windows 7 64-bit operating system on a Dell Inspiron Zino HD; the Itunes software is also 64 bit.

    See the second box of  Troubleshooting issues with iTunes for Windows updates.
    tt2

  • The software required for communicating with ipod and mobile phones was not installed correctly

    ok i've seen this in several threads and haven't found one with an anwser. the software required for communicating with ipod and mobile phones was not installed correctly. of course when you tell it to repair it does not. this has happened several times now and only cure i have found is uninstalling itunes and reinstalling. works for maybe a few weeks then does the same thing and i start all over again with uninstall and reinstall. i tunes version 10.4.1.10  64 bit running on windows 7 64 bit and trying to sync with Iphone 3gs - so anyone have a fix for this or am i stuck reinstalling itunes every few weeks???

    "The feature you are trying to use is on a network resource that is unavailable.  Click OK to try again, or enter an alternative path to a folder containing the installation package "iTunes64msi"
    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • When I click on itunes, it tells me that thesoftware required for communicating with ipods and mobil phones was not installed properly. I have not changed anything on my computer so I'm not sure what I should do? Help

    Help, When I click on itunes on my computer it tells me that the software required for communicating with ipods and mobil phone was not installed properly. I havent' changed anything. Does anyone know what I should do? Thanks

    See the second box of Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Looking for best apple software for image extraction i.e. select an image from one photo and place it on another photo

    looking for best apple software for image extraction i.e. select an image from one photo and place it on another phot

    Cannot guarantee it's the best, but it certainly is the least expensive:
    http://www.gimp.org/downloads/

  • Does anyone have the link for VZW updater software for LG3? Thanks!

    Does anyone have the link for VZW updater software for LG3? Thanks!

    I never did get it to work, says wrong cable but I know that's **. My objective was to install Lollipop which I'm installing now via OTA. Thanks for the help!

  • Using USB port for dial up networking with mobile phone?

    I am thinking of using my mobile phone as a dial up modem when i am away from home and it uses a data cable to the USB port. is there a way to use the USB port on a Mac as your source for the internet?
    Thanks
    Jason

    well i dont have the cable yet i just was wondering if that would work. Yes it has bluetooth but i was told you cant use the bluetooth for a modem. Dont know why the phone has the option. How would i set up that option?

  • Vpn software for connecting mac from windows

    Is there VPN software availbale which I can use in windows system to connect to a mac system?

    Is this for a corporate environment? I would check with your work's I.T. Dept. and find out what they are using as their VPN Server application; my employer uses Checkpoint and in the case of Checkpoint, I know that they made a free Tiger-compatible VPN client for users in addition to a Windows-compatible client that works with their enterprise-class VPN server product; I would imagine that most VPN server vendors would at least have a complementing Windows-compatible client product.
    I know that Equinux makes a "third-party" VPN client called VPN Tracker for Mac platforms, that purportedly interoperates with a great number of VPN server products and fills the void where the server houses have not bothered to support Mac clients -- from prior experience I know for a fact that it worked great with one flavor of Checkpoint server, but I don't know if they make a Windows version or not. Check out equinux.com for more info on that product.

  • Looking for 'Draw MD' software for med professionals

    Where can I download 'draw MD' software for Medical professionals?
    JChacks

    Hi JChacks,
    All the drawMD apps are available for free download in the Apple App Store. Below are links to a few of them:
    http://visibl.es/1aAh1WP
    http://visibl.es/10EA1Bv
    Which specialties are you looking for?
    -Matt Roth

  • Any recommendations for a recovery software for my lost photos on my external drive?

    Would like recommendations for a reputable recovery software for my lost photos from my external drive that I used with my MacBook Pro.

    General File Recovery
    If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro.  Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.  Two free alternatives are Disk Drill and TestDisk.  Look for them and demos at MacUpdate or CNET Downloads.
    The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
    Also visit The XLab FAQs and read the FAQ on Data Recovery.

  • Installation error message for Oracle Database software for version 10g

    Would someone be able to advise why I keep getting the following error message whilst installing Oracle trial Database software for version 10g Release 2 Standard Edition, Standard Edition One, and Enterprise Edition? Link listed below : -
    http://www.oracle.com/technology/software/products/database/oracle10g/index.html
    Error message "Cannot create directory"C:\oracle\product\10.2.0\db_7\cfgtoollogs\dbca\projemp"
    Below is the 12 steps that I go through, please advise what I'm doing wrong : -
    1. (Operations) default is Create a database
    2. (Database templetes) default is general purpose
    3. (Database Identification) projemp.local for Global database name & projemp for SID
    4. (Management options) default is "Configure the database with Enterprise manager, also the options button has been clicked for "Use database control for database management"
    5. (Database Credentials) the options button has been clicked for "Use the same password for all accounts" so I've set up a new password, was that correct?
    6. (Storage options) the options button is clicked for "File System - use the file system for database storage.
    7. (Database file locations) the options button is clicked for "Use database file locations for template" Is this option correct? Other options are Use common location for all database files or use Oracle-managed files?
    8. (Recovery configuration) the options button is clicked for "Specify flash recovery area
    9. (Database content) nothing has been selected, the only option is "Sample schemas" should that be clicked?
    10. (Initialization parameters) the options button is clicked for "Typical- allocate memory as a % of the total physical memory
    11. (Database storage) no options available
    12. (Creation options) the options button has been selected for "Create Database"
    Click finish
    I then get a screen stating General purpose, click OK then I get the following error message as stated at the start of this e-mail ""Cannot create directory"C:\oracle\product\10.2.0\db_7\cfgtoollogs\dbca\projemp".
    Regards
    Phil

    855880 wrote:
    I have been trying to install the "Oracle Database software for version 10g Release 2 Standard Edition, Standard Edition One, and Enterprise Edition" about six times with no success.Do you realize you just mentioned 3 different and distinct products? So which one are you installing?
    >
    I've gone through my courses instructions as listed above (1-12) and end up with the following error message"C:\oracle\product\10.2.0\db_7\cfgtoollogs\dbca\projemp".What course?
    >
    I've removed the software from my computer using control panel, programs & features then uninstall once but the other five times the software hasn't been listed. Whilst the Oracle was on my task bar I was able to install using Start > Programs > Oracle - HOME-NAME > Database Administration > Database Configuration Assistant.No you didn't. Database Configuration Assistant does not remove software. It can remove a database. As I mentioned before, there is a difference between the software and the objects that software manages. Deleting an Excel spreadsheet is not the same as deleting Microsoft Office. Deleting an Oracle database with Database configuration assistant is not the same as removing the Oracle software.
    >
    Now that oracle is not on my task bar I've unzipped the link below, clicked on db, Disk1, setup, changed the Database password (is that correct?) install and I get the following error message "Check complete. The overall result of this check is: Failed<<<<<
    Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
    Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses;
    However, before you can do this, you must configure the Microsoft LoopBack Adaptor to be the primary network adapter on the system. See the installation Guide for more details on installing the software on systems configured with DHCP."
    So what did you do with the above error message? Did you follow up on what it said? Did you read the very fine Installation Guide that comes with the software? Did you read the section on networking considerations where it discussed DHCP assigned addresses and installing the loopback adapter?
    http://www.oracle.com/technology/software/products/database/oracle10g/index.html
    Ok, that link takes us to the download page, which does not shed any light at all on your problems
    I'm using Windows Vista Home Premium, 32 bit operating system, and my computer is saying I have 142 GB free space.
    If you read the installation manual that came with the downloaded software, you'd have seen in the prerequisites that Home editions of Windows are NOT listed as supported platforms, whereas Business, Enterprise, and Ultimate editions specifically ARE listed as supportd.
    Hope this is some help.And
    I'm not to clever on computers so would you be able to advise how I get to the command window to issue the SET command please?
    Also I've no idea what OS user I am, I'm taking an on-line Oracle course and been advised to install "Oracle Database software for version 10g Release 2 Standard Edition, Standard Edition One, and Enterprise Edition"
    How do I find out if I'm part of an Administrator, ORA_DBA group ?
    Can you walk me through how to create the directory from command line please?Ok, given the above statements from you, I'm not even sure where to begin. I don't want to be cruel, but this self-admitted lack of even the most rudimentary knowledge by someone attempting to learn about Oracle is truly astounding. What course are you taking? Why are you taking this course?

  • I am looking for a POS software for multi-users with mobility via 3G and Wi-Fi

    Our company distributes food products to grocery, convenient and pharmacy stores, etc. We currently have an old cumbersome hard to use PC system that interfaces with driver's handhelds, keeps records of sales and monitors inventories on trucks and several warehouses. All our company uses MAC systems with the exception of this PC system. The closest I've come to find a MAC software is Lightspeed but it lacks mobility. Does any one know a good reliable POS system with Mobility hopefully to utilize either iPhones with bar code readers?

    Pages can export documents in MS Word format. When I last did this (with Pages '09, the Mac version), the result was a .doc file.
    Note that this is a translation, and like most translations, it's not always a perfect one. Some features of Pages are not supported in MS Word, and some Word features are not supported in Pages.
    For a more precise answer wrt Pages for iOS, you should repost your question in the iWork For iOS community. The link will take you there.
    Regards,
    Barry

  • When i open itunes it comes up with an error message saying: "The software required for communicating with ipods and mobile phones was not installed correctly.

    It also askes me, if I want itunes to try to repair this for you? I've hit yes but it does not fix the problem, i've also tried to uninstall and reinstall itunes and it still says the same thing. PLEASE HELP ME!!!!!

    See the second box of  Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Looking to purchase Nik software for Lightroom OR Photoshop. Is there a difference in the versions?

    I currently use photoshop for all of my photo editing. I just purchased a copy of Lightroom though, which I plan on integrating into my workflow. I'm also looking to buy the complete collection of Nik software. If I want it to be compatible with photoshop, the complete collection is $200 more expensive. My question is are the versions of Nik software the exact same whether using it for Lightroom or Photoshop? What potential drawbacks are there for me not to be able to use Nik in photoshop, but only in lightroom?
    Thanks!

    The versions are similar but the photoshop version gives you the extra tools for, brushing, erase, fill and clear which to be honest i've never felt a great use for and if you duplicate the layer in photoshop before heading back to LR (to use NIK) you essentially get the same thing.  Eg:
    LR to photoshop as TIF or PSD
    Duplicate layer
    Save and back to Lightroom
    Add NIK effect
    Back to photoshop if you want to do any brushing or mask erasing of the nik plugin you applied in LR because you have the original layer underneith.
    Even better if you think you can get away with all your editing in LR because you will always have the adjusted RAW alongside the TIF or PSD that Nik software will create anyway.  I say save your money, a whole $250 now because the Lightroom version has been reduced again.
    Ahh if only LR would give us layers........

Maybe you are looking for